git.zerfleddert.de Git - proxmark3-svn/blob - client/scripts/test_t55x7_psk.lua

   1 local cmds = require('commands')
   2 local getopt = require('getopt')
   3 local bin = require('bin')
   4 local utils = require('utils')
   5
   6 example =[[
   7         1. script run test_t55x7_psk
   8         2. script run test_t55x7_psk -o
   9
  10 ]]
  11 author = "Iceman"
  12 usage = "script run test_t55x7_psk"
  13 desc =[[
  14 This script will program a T55x7 TAG with the configuration: block 0x00 data 0x00088040
  15 The outlined procedure is as following:
  16
  17 "lf t55xx write 0 00088040"
  18 "lf read"
  19 "data samples"
  20 "data pskdet"
  21 "data psknrz"
  22 "data pskindala"
  23 "data psknrzraw"
  24
  25 Loop OUTER:
  26         change the configuretion block 0 with:
  27     -xxxx8xxx = PSK RF/2 with Manchester modulation
  28     -xxxx1xxx = PSK RF/2 with PSK1 modulation (phase change when input changes)
  29     -xxxx2xxx = PSK RF/2 with PSk2 modulation (phase change on bitclk if input high)
  30     -xxxx3xxx = PSK RF/2 with PSk3 modulation (phase change on rising edge of input)
  31         Loop INNER
  32             for each outer configuration, also do
  33                         XXXXX0XX = PSK RF/2
  34                         XXXXX4XX = PSK RF/4
  35                         XXXXX8XX = PSK RF/8
  36
  37 In all 12 individual test for the PSK demod
  38
  39 Arguments:
  40         -h             : this help
  41 ]]
  42
  43 local TIMEOUT = 2000 -- Shouldn't take longer than 2 seconds
  44 local DEBUG = true -- the debug flag
  45
  46
  47 -- local procedurecmds = {
  48         -- [1] = '%s%s%s%s',
  49         -- [2] = 'lf read',
  50         -- --[3] = '',
  51         -- [3] = 'data samples',
  52         -- [4] = 'data pskdetectclock',
  53         -- [5] = 'data psknrzrawdemod',
  54         -- [6] = 'data pskindalademod',
  55 -- }
  56
  57 -- --BLOCK 0 = 00 08 80 40 PSK
  58              -- -----------
  59                            -- 08------- bitrate
  60                                   -- 8----- modulation PSK1
  61                                    -- 0---- PSK ClockRate
  62                                       -- 40 max 2 blocks
  63
  64 local procedurecmds = {
  65         [1] = '00%02X%X%X40',
  66         [2] = 'lf t55xx detect',
  67         --[3] = '',
  68         [3] = 'lf t55xx info',
  69 }
  70 ---
  71 -- A debug printout-function
  72 function dbg(args)
  73         if not DEBUG then
  74                 return
  75         end
  76
  77     if type(args) == "table" then
  78                 local i = 1
  79                 while args[i] do
  80                         dbg(args[i])
  81                         i = i+1
  82                 end
  83         else
  84                 print("###", args)
  85         end
  86 end
  87 ---
  88 -- This is only meant to be used when errors occur
  89 function oops(err)
  90         print("ERROR: ",err)
  91 end
  92 ---
  93 -- Usage help
  94 function help()
  95         print(desc)
  96         print("Example usage")
  97         print(example)
  98 end
  99 --
 100 -- Exit message
 101 function ExitMsg(msg)
 102         print( string.rep('--',20) )
 103         print( string.rep('--',20) )
 104         print(msg)
 105         print()
 106 end
 107
 108 function test(modulation)
 109         local bitrate
 110         local clockrate
 111         local block = "00"
 112         for bitrate = 0x0, 0x1d, 0x4 do
 113
 114                 for clockrate = 0,8,4 do
 115
 116                         for _ = 1, #procedurecmds do
 117                                 local cmd = procedurecmds[_]
 118
 119                                 if #cmd == 0 then
 120
 121                                 elseif _ == 1 then
 122
 123                                         dbg("Writing to T55x7 TAG")
 124
 125                                         local config = cmd:format(bitrate, modulation, clockrate)
 126                                         dbg(('lf t55xx write 0 %s'):format(config))
 127
 128                                         config = tonumber(config,16)
 129                                         local writecmd = Command:new{cmd = cmds.CMD_T55XX_WRITE_BLOCK,arg1 = config, arg2 = block, arg3 = "00", data = "00"}
 130                                         local err = core.SendCommand(writecmd:getBytes())
 131                                         if err then return oops(err) end
 132                                         local response = core.WaitForResponseTimeout(cmds.CMD_ACK,TIMEOUT)
 133                                 else
 134                                         dbg(cmd)
 135                                         core.console( cmd )
 136                                 end
 137                         end
 138                         core.clearCommandBuffer()
 139                 end
 140         end
 141         print( string.rep('--',20) )
 142 end
 143
 144 local function main(args)
 145
 146         print( string.rep('--',20) )
 147         print( string.rep('--',20) )
 148
 149         -- Arguments for the script
 150         for o, arg in getopt.getopt(args, 'h') do
 151                 if o == "h" then return help() end
 152         end
 153
 154         core.clearCommandBuffer()
 155
 156         test(1)  -- PSK1
 157         --test(2) -- PSK2
 158         --test(3) -- PSK3
 159
 160         print( string.rep('--',20) )
 161 end
 162 main(args)
 163
 164 -- Where it iterates over
 165   -- xxxx8xxx = PSK RF/2 with Manchester modulation
 166   -- xxxx1xxx = PSK RF/2 with PSK1 modulation (phase change when input changes)
 167   -- xxxx2xxx = PSK RF/2 with PSk2 modulation (phase change on bitclk if input high)
 168   -- xxxx3xxx = PSK RF/2 with PSk3 modulation (phase change on rising edge of input)
 169
 170     -- XXXXX0XX = PSK RF/2
 171     -- XXXXX4XX = PSK RF/4
 172     -- XXXXX8XX = PSK RF/8