git.zerfleddert.de Git - proxmark3-svn/blob - fpga/hi_get_trace.v

   1 //-----------------------------------------------------------------------------
   2 //
   3 // piwi, Feb 2019
   4 //-----------------------------------------------------------------------------
   5
   6 module hi_get_trace(
   7        ck_1356megb,
   8        adc_d, trace_enable, major_mode,
   9        ssp_frame, ssp_din, ssp_clk
  10 );
  11     input ck_1356megb;
  12     input [7:0] adc_d;
  13         input trace_enable;
  14         input [2:0] major_mode;
  15     output ssp_frame, ssp_din, ssp_clk;
  16
  17 // clock divider
  18 reg [6:0] clock_cnt;
  19 always @(negedge ck_1356megb)
  20 begin
  21         clock_cnt <= clock_cnt + 1;
  22 end
  23
  24 // sample at 13,56MHz / 8. The highest signal frequency (subcarrier) is 848,5kHz, i.e. in this case we oversample by a factor of 2
  25 reg [2:0] sample_clock;
  26 always @(negedge ck_1356megb)
  27 begin
  28         if (sample_clock == 3'd7)
  29                 sample_clock <= 3'd0;
  30         else
  31                 sample_clock <= sample_clock + 1;
  32 end
  33
  34
  35 reg [11:0] addr;
  36 reg [11:0] start_addr;
  37 reg [2:0] previous_major_mode;
  38 reg write_enable1;
  39 reg write_enable2;
  40 always @(negedge ck_1356megb)
  41 begin
  42         previous_major_mode <= major_mode;
  43         if (major_mode == `FPGA_MAJOR_MODE_HF_GET_TRACE)
  44         begin
  45                 write_enable1 <= 1'b0;
  46                 write_enable2 <= 1'b0;
  47                 if (previous_major_mode != `FPGA_MAJOR_MODE_HF_GET_TRACE) // just switched into GET_TRACE mode
  48                         addr <= start_addr;
  49                 if (clock_cnt == 7'd0)
  50                 begin
  51                         if (addr == 12'd3071)
  52                                 addr <= 12'd0;
  53                         else
  54                                 addr <= addr + 1;
  55                 end
  56         end
  57         else if (major_mode != `FPGA_MAJOR_MODE_OFF)
  58         begin
  59                 if (trace_enable)
  60                 begin
  61                         if (addr[11] == 1'b0)
  62                         begin
  63                                 write_enable1 <= 1'b1;
  64                                 write_enable2 <= 1'b0;
  65                         end
  66                         else
  67                         begin
  68                                 write_enable1 <= 1'b0;
  69                                 write_enable2 <= 1'b1;
  70                         end
  71                         if (sample_clock == 3'b000)
  72                         begin
  73                                 if (addr == 12'd3071)
  74                                 begin
  75                                         addr <= 12'd0;
  76                                         write_enable1 <= 1'b1;
  77                                         write_enable2 <= 1'b0;
  78                                 end
  79                                 else
  80                                         addr <= addr + 1;
  81                         end
  82                 end
  83                 else
  84                 begin
  85                         write_enable1 <= 1'b0;
  86                         write_enable2 <= 1'b0;
  87                         start_addr <= addr;
  88                 end
  89         end
  90         else // major_mode == `FPGA_MAJOR_MODE_OFF
  91         begin
  92                 write_enable1 <= 1'b0;
  93                 write_enable2 <= 1'b0;
  94                 if (previous_major_mode != `FPGA_MAJOR_MODE_OFF && previous_major_mode != `FPGA_MAJOR_MODE_HF_GET_TRACE) // just switched off
  95                         start_addr <= addr;
  96         end
  97 end
  98
  99
 100 // (2+1)k RAM
 101 reg [7:0] D_out1, D_out2;
 102 reg [7:0] ram1 [2047:0];
 103 reg [7:0] ram2 [1023:0];
 104
 105 always @(negedge ck_1356megb)
 106 begin
 107         if (write_enable1)
 108         begin
 109                 ram1[addr[10:0]] <= adc_d;
 110                 D_out1 <= adc_d;
 111         end
 112         else
 113                 D_out1 <= ram1[addr[10:0]];
 114         if (write_enable2)
 115         begin
 116                 ram2[addr[9:0]] <= adc_d;
 117                 D_out2 <= adc_d;
 118         end
 119         else
 120                 D_out2 <= ram2[addr[9:0]];
 121 end
 122
 123
 124 // SSC communication to ARM
 125 reg ssp_clk;
 126 reg ssp_frame;
 127 reg [7:0] shift_out;
 128
 129 always @(negedge ck_1356megb)
 130 begin
 131     if(clock_cnt[3:0] == 4'd0)        // update shift register every 16 clock cycles
 132         begin
 133                 if(clock_cnt[6:4] == 3'd0)    // either load new value
 134                 begin
 135                         if (addr[11] == 1'b0)
 136                                 shift_out <= D_out1;
 137                         else
 138                                 shift_out <= D_out2;
 139                 end
 140                 else                          // or shift left
 141             shift_out[7:1] <= shift_out[6:0];
 142         end
 143
 144         ssp_clk <= ~clock_cnt[3];       // ssp_clk frequency = 13,56MHz / 16 = 847,5 kHz
 145
 146         if(clock_cnt[6:4] == 3'b000)    // set ssp_frame for 0...31
 147                 ssp_frame <= 1'b1;
 148         else
 149                 ssp_frame <= 1'b0;
 150
 151 end
 152
 153 assign ssp_din = shift_out[7];
 154
 155 endmodule