]> git.zerfleddert.de Git - proxmark3-svn/blob - client/hid-flasher/usb_cmd.h
FIX: there were no "memfree" call, there were only "free"
[proxmark3-svn] / client / hid-flasher / usb_cmd.h
1 //-----------------------------------------------------------------------------
2 // Jonathan Westhues, Mar 2006
3 // Edits by Gerhard de Koning Gans, Sep 2007
4 //
5 // This code is licensed to you under the terms of the GNU GPL, version 2 or,
6 // at your option, any later version. See the LICENSE.txt file for the text of
7 // the license.
8 //-----------------------------------------------------------------------------
9 // Definitions for all the types of commands that may be sent over USB; our
10 // own protocol.
11 //-----------------------------------------------------------------------------
12
13 #ifndef __USB_CMD_H
14 #define __USB_CMD_H
15 #ifdef _MSC_VER
16 typedef DWORD uint32_t;
17 typedef BYTE uint8_t;
18 #define PACKED
19 // stuff
20 #else
21 #include <stdint.h>
22 #include <stdbool.h>
23 #define PACKED __attribute__((packed))
24 #endif
25
26 typedef struct {
27 uint32_t cmd;
28 uint32_t arg[3];
29 union {
30 uint8_t asBytes[48];
31 uint32_t asDwords[12];
32 } d;
33 } PACKED UsbCommand;
34
35 // For the bootloader
36 #define CMD_DEVICE_INFO 0x0000
37 #define CMD_SETUP_WRITE 0x0001
38 #define CMD_FINISH_WRITE 0x0003
39 #define CMD_HARDWARE_RESET 0x0004
40 #define CMD_START_FLASH 0x0005
41 #define CMD_NACK 0x00fe
42 #define CMD_ACK 0x00ff
43
44 // For general mucking around
45 #define CMD_DEBUG_PRINT_STRING 0x0100
46 #define CMD_DEBUG_PRINT_INTEGERS 0x0101
47 #define CMD_DEBUG_PRINT_BYTES 0x0102
48 #define CMD_LCD_RESET 0x0103
49 #define CMD_LCD 0x0104
50 #define CMD_BUFF_CLEAR 0x0105
51 #define CMD_READ_MEM 0x0106
52 #define CMD_VERSION 0x0107
53 #define CMD_STATUS 0x0108
54 #define CMD_PING 0x0109
55
56 #define CMD_DOWNLOAD_EML_BIGBUF 0x0110
57 #define CMD_DOWNLOADED_EML_BIGBUF 0x0111
58
59 // For low-frequency tags
60 #define CMD_READ_TI_TYPE 0x0202
61 #define CMD_WRITE_TI_TYPE 0x0203
62 #define CMD_DOWNLOADED_RAW_BITS_TI_TYPE 0x0204
63 #define CMD_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0205
64 #define CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0206
65 #define CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K 0x0207
66 #define CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K 0x0208
67 #define CMD_DOWNLOADED_SIM_SAMPLES_125K 0x0209
68 #define CMD_SIMULATE_TAG_125K 0x020A
69 #define CMD_HID_DEMOD_FSK 0x020B
70 #define CMD_HID_SIM_TAG 0x020C
71 #define CMD_SET_LF_DIVISOR 0x020D
72 #define CMD_LF_SIMULATE_BIDIR 0x020E
73 #define CMD_SET_ADC_MUX 0x020F
74 #define CMD_HID_CLONE_TAG 0x0210
75 #define CMD_EM410X_WRITE_TAG 0x0211
76 #define CMD_INDALA_CLONE_TAG 0x0212
77 // for 224 bits UID
78 #define CMD_INDALA_CLONE_TAG_L 0x0213
79 #define CMD_T55XX_READ_BLOCK 0x0214
80 #define CMD_T55XX_WRITE_BLOCK 0x0215
81 #define CMD_T55XX_RESET_READ 0x0216
82 #define CMD_T55XX_WAKEUP 0x0224
83
84 #define CMD_PCF7931_READ 0x0217
85 #define CMD_PCF7931_WRITE 0x0223
86 #define CMD_EM4X_READ_WORD 0x0218
87 #define CMD_EM4X_WRITE_WORD 0x0219
88 #define CMD_IO_DEMOD_FSK 0x021A
89 #define CMD_IO_CLONE_TAG 0x021B
90 #define CMD_EM410X_DEMOD 0x021c
91 // Sampling configuration for LF reader/snooper
92 #define CMD_SET_LF_SAMPLING_CONFIG 0x021d
93 #define CMD_FSK_SIM_TAG 0x021E
94 #define CMD_ASK_SIM_TAG 0x021F
95 #define CMD_PSK_SIM_TAG 0x0220
96 #define CMD_AWID_DEMOD_FSK 0x0221
97 #define CMD_VIKING_CLONE_TAG 0x0222
98
99
100 /* CMD_SET_ADC_MUX: ext1 is 0 for lopkd, 1 for loraw, 2 for hipkd, 3 for hiraw */
101
102 // For the 13.56 MHz tags
103 #define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 0x0300
104 #define CMD_READ_SRI_TAG 0x0303
105 #define CMD_ISO_14443B_COMMAND 0x0305
106 #define CMD_READER_ISO_15693 0x0310
107 #define CMD_SIMTAG_ISO_15693 0x0311
108 #define CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693 0x0312
109 #define CMD_ISO_15693_COMMAND 0x0313
110 #define CMD_ISO_15693_COMMAND_DONE 0x0314
111 #define CMD_ISO_15693_FIND_AFI 0x0315
112 #define CMD_ISO_15693_DEBUG 0x0316
113 #define CMD_LF_SNOOP_RAW_ADC_SAMPLES 0x0317
114
115 // For Hitag2 transponders
116 #define CMD_SNOOP_HITAG 0x0370
117 #define CMD_SIMULATE_HITAG 0x0371
118 #define CMD_READER_HITAG 0x0372
119
120 // For HitagS
121 #define CMD_SIMULATE_HITAG_S 0x0368
122 #define CMD_TEST_HITAGS_TRACES 0x0367
123 #define CMD_READ_HITAG_S 0x0373
124 #define CMD_WR_HITAG_S 0x0375
125 #define CMD_EMU_HITAG_S 0x0376
126
127 #define CMD_SIMULATE_TAG_ISO_14443B 0x0381
128 #define CMD_SNOOP_ISO_14443B 0x0382
129 #define CMD_SNOOP_ISO_14443a 0x0383
130 #define CMD_SIMULATE_TAG_ISO_14443a 0x0384
131 #define CMD_READER_ISO_14443a 0x0385
132 #define CMD_SIMULATE_TAG_LEGIC_RF 0x0387
133 #define CMD_READER_LEGIC_RF 0x0388
134 #define CMD_WRITER_LEGIC_RF 0x0389
135 #define CMD_EPA_PACE_COLLECT_NONCE 0x038A
136 #define CMD_EPA_PACE_REPLAY 0x038B
137
138 #define CMD_SNOOP_ICLASS 0x0392
139 #define CMD_SIMULATE_TAG_ICLASS 0x0393
140 #define CMD_READER_ICLASS 0x0394
141 #define CMD_READER_ICLASS_REPLAY 0x0395
142 #define CMD_ICLASS_ISO14443A_WRITE 0x0397
143 #define CMD_ICLASS_EML_MEMSET 0x0398
144
145 // For measurements of the antenna tuning
146 #define CMD_MEASURE_ANTENNA_TUNING 0x0400
147 #define CMD_MEASURE_ANTENNA_TUNING_HF 0x0401
148 #define CMD_MEASURED_ANTENNA_TUNING 0x0410
149 #define CMD_LISTEN_READER_FIELD 0x0420
150
151 // For direct FPGA control
152 #define CMD_FPGA_MAJOR_MODE_OFF 0x0500
153
154 // For mifare commands
155 #define CMD_MIFARE_SET_DBGMODE 0x0600
156 #define CMD_MIFARE_EML_MEMCLR 0x0601
157 #define CMD_MIFARE_EML_MEMSET 0x0602
158 #define CMD_MIFARE_EML_MEMGET 0x0603
159 #define CMD_MIFARE_EML_CARDLOAD 0x0604
160
161 // magic chinese card commands
162 #define CMD_MIFARE_CSETBLOCK 0x0605
163 #define CMD_MIFARE_CGETBLOCK 0x0606
164 #define CMD_MIFARE_CIDENT 0x0607
165
166 #define CMD_SIMULATE_MIFARE_CARD 0x0610
167
168 #define CMD_READER_MIFARE 0x0611
169 #define CMD_MIFARE_NESTED 0x0612
170 #define CMD_MIFARE_ACQUIRE_ENCRYPTED_NONCES 0x0613
171
172
173 #define CMD_MIFARE_READBL 0x0620
174 #define CMD_MIFAREU_READBL 0x0720
175 #define CMD_MIFARE_READSC 0x0621
176 #define CMD_MIFAREU_READCARD 0x0721
177 #define CMD_MIFARE_WRITEBL 0x0622
178 #define CMD_MIFAREU_WRITEBL 0x0722
179 #define CMD_MIFAREU_WRITEBL_COMPAT 0x0723
180
181 #define CMD_MIFARE_CHKKEYS 0x0623
182
183 #define CMD_MIFARE_SNIFFER 0x0630
184 //ultralightC
185 #define CMD_MIFAREUC_AUTH 0x0724
186 //0x0725 and 0x0726 no longer used
187 #define CMD_MIFAREUC_SETPWD 0x0727
188
189
190 // mifare desfire
191 #define CMD_MIFARE_DESFIRE_READBL 0x0728
192 #define CMD_MIFARE_DESFIRE_WRITEBL 0x0729
193 #define CMD_MIFARE_DESFIRE_AUTH1 0x072a
194 #define CMD_MIFARE_DESFIRE_AUTH2 0x072b
195 #define CMD_MIFARE_DES_READER 0x072c
196 #define CMD_MIFARE_DESFIRE_INFO 0x072d
197 #define CMD_MIFARE_DESFIRE 0x072e
198
199 #define CMD_MIFARE_COLLECT_NONCES 0x072f
200
201 #define CMD_HF_SNIFFER 0x0800
202
203 #define CMD_UNKNOWN 0xFFFF
204
205
206 //Mifare simulation flags
207 #define FLAG_INTERACTIVE 0x01
208 #define FLAG_4B_UID_IN_DATA 0x02
209 #define FLAG_7B_UID_IN_DATA 0x04
210 #define FLAG_10B_UID_IN_DATA 0x08
211 #define FLAG_UID_IN_EMUL 0x10
212 #define FLAG_NR_AR_ATTACK 0x20
213
214
215 //Iclass reader flags
216 #define FLAG_ICLASS_READER_ONLY_ONCE 0x01
217 #define FLAG_ICLASS_READER_CC 0x02
218 #define FLAG_ICLASS_READER_CSN 0x04
219 #define FLAG_ICLASS_READER_CONF 0x08
220 #define FLAG_ICLASS_READER_AA 0x10
221 #define FLAG_ICLASS_READER_ONE_TRY 0x20
222
223
224
225 // CMD_DEVICE_INFO response packet has flags in arg[0], flag definitions:
226 /* Whether a bootloader that understands the common_area is present */
227 #define DEVICE_INFO_FLAG_BOOTROM_PRESENT (1<<0)
228
229 /* Whether a osimage that understands the common_area is present */
230 #define DEVICE_INFO_FLAG_OSIMAGE_PRESENT (1<<1)
231
232 /* Set if the bootloader is currently executing */
233 #define DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM (1<<2)
234
235 /* Set if the OS is currently executing */
236 #define DEVICE_INFO_FLAG_CURRENT_MODE_OS (1<<3)
237
238 /* Set if this device understands the extend start flash command */
239 #define DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH (1<<4)
240
241 /* CMD_START_FLASH may have three arguments: start of area to flash,
242 end of area to flash, optional magic.
243 The bootrom will not allow to overwrite itself unless this magic
244 is given as third parameter */
245
246 #define START_FLASH_MAGIC 0x54494f44 // 'DOIT'
247
248 #endif
Impressum, Datenschutz