git.zerfleddert.de Git - proxmark3-svn/blob - client/fpga_compress.c

   1 //-----------------------------------------------------------------------------
   2 // This code is licensed to you under the terms of the GNU GPL, version 2 or,
   3 // at your option, any later version. See the LICENSE.txt file for the text of
   4 // the license.
   5 //-----------------------------------------------------------------------------
   6 // Compression tool for FPGA config files. Compress several *.bit files at
   7 // compile time. Decompression is done at run time (see fpgaloader.c).
   8 // This uses the zlib library tuned to this specific case. The small file sizes
   9 // allow to use "insane" parameters for optimum compression ratio.
  10 //-----------------------------------------------------------------------------
  11
  12 #include <stdio.h>
  13 #include <stdlib.h>
  14 #include <string.h>
  15 #include <stdint.h>
  16 #include <stdbool.h>
  17 #include "zlib.h"
  18
  19 #define MAX(a,b) ((a)>(b)?(a):(b))
  20
  21 // zlib configuration
  22 #define COMPRESS_LEVEL                  9               // use best possible compression
  23 #define COMPRESS_WINDOW_BITS    15              // default = max = 15 for a window of 2^15 = 32KBytes
  24 #define COMPRESS_MEM_LEVEL              9               // determines the amount of memory allocated during compression. Default = 8.
  25 /* COMPRESS_STRATEGY can be
  26         Z_DEFAULT_STRATEGY (the default),
  27         Z_FILTERED (more huffmann, less string matching),
  28         Z_HUFFMAN_ONLY (huffman only, no string matching)
  29         Z_RLE (distances limited to one)
  30         Z_FIXED (prevents the use of dynamic Huffman codes)
  31 */
  32 #define COMPRESS_STRATEGY               Z_DEFAULT_STRATEGY
  33 // zlib tuning parameters:
  34 #define COMPRESS_GOOD_LENGTH            258
  35 #define COMPRESS_MAX_LAZY                       258
  36 #define COMPRESS_MAX_NICE_LENGTH        258
  37 #define COMPRESS_MAX_CHAIN                      8192
  38
  39 #define FPGA_INTERLEAVE_SIZE    288     // (the FPGA's internal config frame size is 288 bits. Interleaving with 288 bytes should give best compression)
  40 #define FPGA_CONFIG_SIZE                42336   // our current fpga_[lh]f.bit files are 42175 bytes. Rounded up to next multiple of FPGA_INTERLEAVE_SIZE
  41
  42 static void usage(void)
  43 {
  44         fprintf(stderr, "Usage: fpga_compress <infile1> <infile2> ... <infile_n> <outfile>\n");
  45         fprintf(stderr, "          Combine n FPGA bitstream files and compress them into one.\n\n");
  46         fprintf(stderr, "       fpga_compress -d <infile> <outfile>");
  47         fprintf(stderr, "          Decompress <infile>. Write result to <outfile>");
  48 }
  49
  50
  51 static voidpf fpga_deflate_malloc(voidpf opaque, uInt items, uInt size)
  52 {
  53         return malloc(items*size);
  54 }
  55
  56
  57 static void fpga_deflate_free(voidpf opaque, voidpf address)
  58 {
  59         return free(address);
  60 }
  61
  62
  63 static bool all_feof(FILE *infile[], uint8_t num_infiles)
  64 {
  65         for (uint16_t i = 0; i < num_infiles; i++) {
  66                 if (!feof(infile[i])) {
  67                         return false;
  68                 }
  69         }
  70
  71         return true;
  72 }
  73
  74
  75 int zlib_compress(FILE *infile[], uint8_t num_infiles, FILE *outfile)
  76 {
  77         uint8_t *fpga_config;
  78         uint32_t i;
  79         int ret;
  80         int c;
  81         z_stream compressed_fpga_stream;
  82
  83         fpga_config = malloc(num_infiles * FPGA_CONFIG_SIZE);
  84
  85         // read the input files. Interleave them into fpga_config[]
  86         i = 0;
  87         do {
  88
  89                 if (i >= num_infiles * FPGA_CONFIG_SIZE) {
  90                         fprintf(stderr, "Input files too big (total > %d bytes). These are probably not PM3 FPGA config files.\n", num_infiles*FPGA_CONFIG_SIZE);
  91                         for(uint16_t j = 0; j < num_infiles; j++) {
  92                                 fclose(infile[j]);
  93                         }
  94                         free(fpga_config);
  95                         return(EXIT_FAILURE);
  96                 }
  97
  98                 for(uint16_t j = 0; j < num_infiles; j++) {
  99                         for(uint16_t k = 0; k < FPGA_INTERLEAVE_SIZE; k++) {
 100                                 c = fgetc(infile[j]);
 101                                 if (!feof(infile[j])) {
 102                                         fpga_config[i++] = c &0xFF;
 103                                 } else if (num_infiles > 1) {
 104                                         fpga_config[i++] = '\0';
 105                                 }
 106                         }
 107                 }
 108
 109         } while (!all_feof(infile, num_infiles));
 110
 111         // initialize zlib structures
 112         compressed_fpga_stream.next_in = fpga_config;
 113         compressed_fpga_stream.avail_in = i;
 114         compressed_fpga_stream.zalloc = fpga_deflate_malloc;
 115         compressed_fpga_stream.zfree = fpga_deflate_free;
 116         compressed_fpga_stream.opaque = Z_NULL;
 117
 118         ret = deflateInit2(&compressed_fpga_stream,
 119                                                 COMPRESS_LEVEL,
 120                                                 Z_DEFLATED,
 121                                                 COMPRESS_WINDOW_BITS,
 122                                                 COMPRESS_MEM_LEVEL,
 123                                                 COMPRESS_STRATEGY);
 124
 125         // estimate the size of the compressed output
 126         unsigned int outsize_max = deflateBound(&compressed_fpga_stream, compressed_fpga_stream.avail_in);
 127         uint8_t *outbuf = malloc(outsize_max);
 128         compressed_fpga_stream.next_out = outbuf;
 129         compressed_fpga_stream.avail_out = outsize_max;
 130
 131         if (ret == Z_OK) {
 132                 ret = deflateTune(&compressed_fpga_stream,
 133                                                         COMPRESS_GOOD_LENGTH,
 134                                                         COMPRESS_MAX_LAZY,
 135                                                         COMPRESS_MAX_NICE_LENGTH,
 136                                                         COMPRESS_MAX_CHAIN);
 137         }
 138
 139         if (ret == Z_OK) {
 140                 ret = deflate(&compressed_fpga_stream, Z_FINISH);
 141         }
 142
 143         fprintf(stderr, "compressed %u input bytes to %lu output bytes\n", i, compressed_fpga_stream.total_out);
 144
 145         if (ret != Z_STREAM_END) {
 146                 fprintf(stderr, "Error in deflate(): %d %s\n", ret, compressed_fpga_stream.msg);
 147                 free(outbuf);
 148                 deflateEnd(&compressed_fpga_stream);
 149                 for(uint16_t j = 0; j < num_infiles; j++) {
 150                         fclose(infile[j]);
 151                 }
 152                 fclose(outfile);
 153                 free(infile);
 154                 free(fpga_config);
 155                 return(EXIT_FAILURE);
 156                 }
 157
 158         for (i = 0; i < compressed_fpga_stream.total_out; i++) {
 159                 fputc(outbuf[i], outfile);
 160         }
 161
 162         free(outbuf);
 163         deflateEnd(&compressed_fpga_stream);
 164         for(uint16_t j = 0; j < num_infiles; j++) {
 165                 fclose(infile[j]);
 166         }
 167         fclose(outfile);
 168         free(infile);
 169         free(fpga_config);
 170
 171         return(EXIT_SUCCESS);
 172
 173 }
 174
 175
 176 int zlib_decompress(FILE *infile, FILE *outfile)
 177 {
 178         #define DECOMPRESS_BUF_SIZE 1024
 179         uint8_t outbuf[DECOMPRESS_BUF_SIZE];
 180         uint8_t inbuf[DECOMPRESS_BUF_SIZE];
 181         int ret;
 182
 183         z_stream compressed_fpga_stream;
 184
 185         // initialize zlib structures
 186         compressed_fpga_stream.next_in = inbuf;
 187         compressed_fpga_stream.avail_in = 0;
 188         compressed_fpga_stream.next_out = outbuf;
 189         compressed_fpga_stream.avail_out = DECOMPRESS_BUF_SIZE;
 190         compressed_fpga_stream.zalloc = fpga_deflate_malloc;
 191         compressed_fpga_stream.zfree = fpga_deflate_free;
 192         compressed_fpga_stream.opaque = Z_NULL;
 193
 194         ret = inflateInit2(&compressed_fpga_stream, 0);
 195
 196         do {
 197                 if (compressed_fpga_stream.avail_in == 0) {
 198                         compressed_fpga_stream.next_in = inbuf;
 199                         uint16_t i = 0;
 200                         do {
 201                                 int c = fgetc(infile);
 202                                 if (!feof(infile)) {
 203                                         inbuf[i++] = c;
 204                                         compressed_fpga_stream.avail_in++;
 205                                 } else {
 206                                         break;
 207                                 }
 208                         } while (i < DECOMPRESS_BUF_SIZE);
 209                 }
 210
 211                 ret = inflate(&compressed_fpga_stream, Z_SYNC_FLUSH);
 212
 213                 if (ret != Z_OK && ret != Z_STREAM_END) {
 214                         break;
 215                 }
 216
 217                 if (compressed_fpga_stream.avail_out == 0) {
 218                         for (uint16_t i = 0; i < DECOMPRESS_BUF_SIZE; i++) {
 219                                 fputc(outbuf[i], outfile);
 220                         }
 221                         compressed_fpga_stream.avail_out = DECOMPRESS_BUF_SIZE;
 222                         compressed_fpga_stream.next_out = outbuf;
 223                 }
 224         } while (ret == Z_OK);
 225
 226         if (ret == Z_STREAM_END) {  // reached end of input
 227                 uint16_t i = 0;
 228                 while (compressed_fpga_stream.avail_out < DECOMPRESS_BUF_SIZE) {
 229                         fputc(outbuf[i++], outfile);
 230                         compressed_fpga_stream.avail_out++;
 231                 }
 232                 fclose(outfile);
 233                 fclose(infile);
 234                 return(EXIT_SUCCESS);
 235         } else {
 236                 fprintf(stderr, "Error. Inflate() returned error %d, %s", ret, compressed_fpga_stream.msg);
 237                 fclose(outfile);
 238                 fclose(infile);
 239                 return(EXIT_FAILURE);
 240         }
 241
 242 }
 243
 244
 245 int main(int argc, char **argv)
 246 {
 247         FILE **infiles;
 248         FILE *outfile;
 249
 250         if (argc == 1 || argc == 2) {
 251                 usage();
 252                 return(EXIT_FAILURE);
 253         }
 254
 255         if (!strcmp(argv[1], "-d")) {                   // Decompress
 256                 infiles = calloc(1, sizeof(FILE*));
 257                 if (argc != 4) {
 258                         usage();
 259                         return(EXIT_FAILURE);
 260                 }
 261                 infiles[0] = fopen(argv[2], "rb");
 262                 if (infiles[0] == NULL) {
 263                         fprintf(stderr, "Error. Cannot open input file %s", argv[2]);
 264                         return(EXIT_FAILURE);
 265                 }
 266                 outfile = fopen(argv[3], "wb");
 267                 if (outfile == NULL) {
 268                         fprintf(stderr, "Error. Cannot open output file %s", argv[3]);
 269                         return(EXIT_FAILURE);
 270                 }
 271                 return zlib_decompress(infiles[0], outfile);
 272
 273         } else {                                                                // Compress
 274
 275                 infiles = calloc(argc-2, sizeof(FILE*));
 276                 for (uint16_t i = 0; i < argc-2; i++) {
 277                         infiles[i] = fopen(argv[i+1], "rb");
 278                         if (infiles[i] == NULL) {
 279                                 fprintf(stderr, "Error. Cannot open input file %s", argv[i+1]);
 280                                 return(EXIT_FAILURE);
 281                         }
 282                 }
 283                 outfile = fopen(argv[argc-1], "wb");
 284                 if (outfile == NULL) {
 285                         fprintf(stderr, "Error. Cannot open output file %s", argv[argc-1]);
 286                         return(EXIT_FAILURE);
 287                 }
 288                 return zlib_compress(infiles, argc-2, outfile);
 289         }
 290 }