git.zerfleddert.de Git - proxmark3-svn/blob - README.md

   1 # proxmark3: the official Proxmark repository!
   2
   3 The proxmark3 is a powerful general purpose RFID tool, the size of a deck
   4 of cards, designed to snoop, listen and emulate everything from
   5 **Low Frequency (125kHz)** to **High Frequency (13.56MHz)** tags.
   6
   7 This repository contains enough software, logic (for the FPGA), and design
   8 documentation for the hardware that you could, at least in theory,
   9 do something useful with a proxmark3.
  10
  11 ## Resources
  12
  13 * [This repository!](https://github.com/Proxmark/proxmark3)
  14 * [The Wiki](https://github.com/Proxmark/proxmark3/wiki)
  15 * [The GitHub Pages website](http://proxmark.github.io/proxmark3/)
  16 * [The Forum](http://www.proxmark.org/forum)
  17 * The IRC channel: irc.freenode.org #proxmark3 ([chat in your browser](http://webchat.freenode.net/?channels=#proxmark3))
  18 * [The Homebrew formula repository](https://github.com/Proxmark/homebrew-proxmark3)
  19
  20 ## Development
  21
  22 The tools required to build  or run the project will vary depending on
  23 your operating system. Please refer to [the wiki](https://github.com/Proxmark/proxmark3/wiki) for details.
  24
  25 ## Obtaining hardware
  26
  27 The Proxmark3 is available for purchase (assembled and tested) from the
  28 following locations:
  29
  30 * [RyscCorp](https://proxmark3.com/) (US)
  31 * [Elechouse](http://www.elechouse.com/) (HK)
  32 * [Lab401](https://lab401.com/) (FR)
  33 * [RFxSecure](http://www.rfxsecure.com/) (SG)
  34 * [IceSQL](http://proxmark3.tictail.com/) (SE)
  35
  36 Most of the ultra-low-volume contract assemblers could put
  37 something like this together with a reasonable yield. A run of around
  38 a dozen units is probably cost-effective. The BOM includes (possibly-
  39 outdated) component pricing, and everything is available from Digikey
  40 and the usual distributors.
  41
  42 If you've never assembled a modern circuit board by hand, then this is
  43 not a good place to start. Some of the components (e.g. the crystals)
  44 must not be assembled with a soldering iron, and require hot air.
  45
  46 The schematics are included; the component values given are not
  47 necessarily correct for all situations, but it should be possible to do
  48 nearly anything you would want with appropriate population options.
  49
  50 The printed circuit board artwork is also available, as Gerbers and an
  51 Excellon drill file.
  52
  53
  54 ## License
  55
  56 This program is free software; you can redistribute it and/or modify
  57 it under the terms of the GNU General Public License as published by
  58 the Free Software Foundation; either version 2 of the License, or
  59 (at your option) any later version.
  60
  61 This program is distributed in the hope that it will be useful,
  62 but WITHOUT ANY WARRANTY; without even the implied warranty of
  63 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  64 GNU General Public License for more details.
  65
  66 You should have received a copy of the GNU General Public License
  67 along with this program; if not, write to the Free Software
  68 Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  69
  70
  71 Jonathan Westhues
  72 user jwesthues, at host cq.cx
  73
  74 May 2007, Cambridge MA