git.zerfleddert.de Git - proxmark3-svn/blob - bootrom/bootrom.c

   1 //-----------------------------------------------------------------------------
   2 // This code is licensed to you under the terms of the GNU GPL, version 2 or,
   3 // at your option, any later version. See the LICENSE.txt file for the text of
   4 // the license.
   5 //-----------------------------------------------------------------------------
   6 // Main code for the bootloader
   7 //-----------------------------------------------------------------------------
   8
   9 #include <proxmark3.h>
  10
  11 struct common_area common_area __attribute__((section(".commonarea")));
  12 unsigned int start_addr, end_addr, bootrom_unlocked;
  13 extern char _bootrom_start, _bootrom_end, _flash_start, _flash_end;
  14
  15 static void ConfigClocks(void)
  16 {
  17     // we are using a 16 MHz crystal as the basis for everything
  18     // slow clock runs at 32Khz typical regardless of crystal
  19
  20     // enable system clock and USB clock
  21     AT91C_BASE_PMC->PMC_SCER = AT91C_PMC_PCK | AT91C_PMC_UDP;
  22
  23         // enable the clock to the following peripherals
  24     AT91C_BASE_PMC->PMC_PCER =
  25                 (1<<AT91C_ID_PIOA)      |
  26                 (1<<AT91C_ID_ADC)       |
  27                 (1<<AT91C_ID_SPI)       |
  28                 (1<<AT91C_ID_SSC)       |
  29                 (1<<AT91C_ID_PWMC)      |
  30                 (1<<AT91C_ID_UDP);
  31
  32         // worst case scenario, with 16Mhz xtal startup delay is 14.5ms
  33         // with a slow clock running at it worst case (max) frequency of 42khz
  34         // max startup delay = (14.5ms*42k)/8 = 76 = 0x4C round up to 0x50
  35
  36         // enable main oscillator and set startup delay
  37     AT91C_BASE_PMC->PMC_MOR =
  38         PMC_MAIN_OSC_ENABLE |
  39         PMC_MAIN_OSC_STARTUP_DELAY(0x50);
  40
  41         // wait for main oscillator to stabilize
  42         while ( !(AT91C_BASE_PMC->PMC_SR & PMC_MAIN_OSC_STABILIZED) )
  43                 ;
  44
  45     // minimum PLL clock frequency is 80 MHz in range 00 (96 here so okay)
  46     // frequency is crystal * multiplier / divisor = 16Mhz * 12 / 2 = 96Mhz
  47     AT91C_BASE_PMC->PMC_PLLR =
  48         PMC_PLL_DIVISOR(2) |
  49                 PMC_PLL_COUNT_BEFORE_LOCK(0x50) |
  50                 PMC_PLL_FREQUENCY_RANGE(0) |
  51                 PMC_PLL_MULTIPLIER(12) |
  52                 PMC_PLL_USB_DIVISOR(1);
  53
  54         // wait for PLL to lock
  55         while ( !(AT91C_BASE_PMC->PMC_SR & PMC_MAIN_OSC_PLL_LOCK) )
  56                 ;
  57
  58         // we want a master clock (MCK) to be PLL clock / 2 = 96Mhz / 2 = 48Mhz
  59         // as per datasheet, this register must be programmed in two operations
  60         // when changing to PLL, program the prescaler first then the source
  61     AT91C_BASE_PMC->PMC_MCKR = PMC_CLK_PRESCALE_DIV_2;
  62
  63         // wait for main clock ready signal
  64         while ( !(AT91C_BASE_PMC->PMC_SR & PMC_MAIN_OSC_MCK_READY) )
  65                 ;
  66
  67         // set the source to PLL
  68     AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_CSS_PLL_CLK | PMC_CLK_PRESCALE_DIV_2;
  69
  70         // wait for main clock ready signal
  71         while ( !(AT91C_BASE_PMC->PMC_SR & PMC_MAIN_OSC_MCK_READY) )
  72                 ;
  73 }
  74
  75 static void Fatal(void)
  76 {
  77     for(;;);
  78 }
  79
  80 void UsbPacketReceived(uint8_t *packet, int len)
  81 {
  82     int i, dont_ack=0;
  83     UsbCommand *c = (UsbCommand *)packet;
  84     volatile uint32_t *p;
  85
  86     if(len != sizeof(*c)) {
  87         Fatal();
  88     }
  89
  90     switch(c->cmd) {
  91         case CMD_DEVICE_INFO:
  92             dont_ack = 1;
  93             c->cmd = CMD_DEVICE_INFO;
  94             c->arg[0] = DEVICE_INFO_FLAG_BOOTROM_PRESENT | DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM |
  95                 DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH;
  96             if(common_area.flags.osimage_present) c->arg[0] |= DEVICE_INFO_FLAG_OSIMAGE_PRESENT;
  97             UsbSendPacket(packet, len);
  98             break;
  99
 100         case CMD_SETUP_WRITE:
 101             /* The temporary write buffer of the embedded flash controller is mapped to the
 102              * whole memory region, only the last 8 bits are decoded.
 103              */
 104             p = (volatile uint32_t *)&_flash_start;
 105             for(i = 0; i < 12; i++) {
 106                 p[i+c->arg[0]] = c->d.asDwords[i];
 107             }
 108             break;
 109
 110         case CMD_FINISH_WRITE:
 111             p = (volatile uint32_t *)&_flash_start;
 112             for(i = 0; i < 4; i++) {
 113                 p[i+60] = c->d.asDwords[i];
 114             }
 115
 116             /* Check that the address that we are supposed to write to is within our allowed region */
 117             if( ((c->arg[0]+AT91C_IFLASH_PAGE_SIZE-1) >= end_addr) || (c->arg[0] < start_addr) ) {
 118                 /* Disallow write */
 119                 dont_ack = 1;
 120                 c->cmd = CMD_NACK;
 121                 UsbSendPacket(packet, len);
 122             } else {
 123                 /* Translate address to flash page and do flash, update here for the 512k part */
 124                 AT91C_BASE_EFC0->EFC_FCR = MC_FLASH_COMMAND_KEY |
 125                     MC_FLASH_COMMAND_PAGEN((c->arg[0]-(int)&_flash_start)/AT91C_IFLASH_PAGE_SIZE) |
 126                     AT91C_MC_FCMD_START_PROG;
 127             }
 128
 129             uint32_t sr;
 130
 131             while(!((sr = AT91C_BASE_EFC0->EFC_FSR) & MC_FLASH_STATUS_READY))
 132                 ;
 133             if(sr & (MC_FLASH_STATUS_LOCKE | MC_FLASH_STATUS_PROGE)) {
 134                     dont_ack = 1;
 135                     c->cmd = CMD_NACK;
 136                     UsbSendPacket(packet, len);
 137             }
 138             break;
 139
 140         case CMD_HARDWARE_RESET:
 141             USB_D_PLUS_PULLUP_OFF();
 142             AT91C_BASE_RSTC->RSTC_RCR = RST_CONTROL_KEY | AT91C_RSTC_PROCRST;
 143             break;
 144
 145         case CMD_START_FLASH:
 146             if(c->arg[2] == START_FLASH_MAGIC) bootrom_unlocked = 1;
 147             else bootrom_unlocked = 0;
 148             {
 149                 int prot_start = (int)&_bootrom_start;
 150                 int prot_end = (int)&_bootrom_end;
 151                 int allow_start = (int)&_flash_start;
 152                 int allow_end = (int)&_flash_end;
 153                 int cmd_start = c->arg[0];
 154                 int cmd_end = c->arg[1];
 155
 156                 /* Only allow command if the bootrom is unlocked, or the parameters are outside of the protected
 157                  * bootrom area. In any case they must be within the flash area.
 158                  */
 159                 if( (bootrom_unlocked || ((cmd_start >= prot_end) || (cmd_end < prot_start)))
 160                     && (cmd_start >= allow_start) && (cmd_end <= allow_end) ) {
 161                     start_addr = cmd_start;
 162                     end_addr = cmd_end;
 163                 } else {
 164                     start_addr = end_addr = 0;
 165                     dont_ack = 1;
 166                     c->cmd = CMD_NACK;
 167                     UsbSendPacket(packet, len);
 168                 }
 169             }
 170             break;
 171
 172         default:
 173             Fatal();
 174             break;
 175     }
 176
 177     if(!dont_ack) {
 178         c->cmd = CMD_ACK;
 179         UsbSendPacket(packet, len);
 180     }
 181 }
 182
 183 static void flash_mode(int externally_entered)
 184 {
 185         start_addr = 0;
 186         end_addr = 0;
 187         bootrom_unlocked = 0;
 188
 189         UsbStart();
 190         for(;;) {
 191                 WDT_HIT();
 192
 193                 UsbPoll(TRUE);
 194
 195                 if(!externally_entered && !BUTTON_PRESS()) {
 196                         /* Perform a reset to leave flash mode */
 197                         USB_D_PLUS_PULLUP_OFF();
 198                         LED_B_ON();
 199                         AT91C_BASE_RSTC->RSTC_RCR = RST_CONTROL_KEY | AT91C_RSTC_PROCRST;
 200                         for(;;);
 201                 }
 202                 if(externally_entered && BUTTON_PRESS()) {
 203                         /* Let the user's button press override the automatic leave */
 204                         externally_entered = 0;
 205                 }
 206         }
 207 }
 208
 209 extern char _osimage_entry;
 210 void BootROM(void)
 211 {
 212     //------------
 213     // First set up all the I/O pins; GPIOs configured directly, other ones
 214     // just need to be assigned to the appropriate peripheral.
 215
 216     // Kill all the pullups, especially the one on USB D+; leave them for
 217     // the unused pins, though.
 218     AT91C_BASE_PIOA->PIO_PPUDR =
 219         GPIO_USB_PU                     |
 220                 GPIO_LED_A                      |
 221                 GPIO_LED_B                      |
 222                 GPIO_LED_C                      |
 223                 GPIO_LED_D                      |
 224                 GPIO_FPGA_DIN           |
 225                 GPIO_FPGA_DOUT          |
 226                 GPIO_FPGA_CCLK          |
 227                 GPIO_FPGA_NINIT         |
 228                 GPIO_FPGA_NPROGRAM      |
 229                 GPIO_FPGA_DONE          |
 230                 GPIO_MUXSEL_HIPKD       |
 231                 GPIO_MUXSEL_HIRAW       |
 232                 GPIO_MUXSEL_LOPKD       |
 233                 GPIO_MUXSEL_LORAW       |
 234                 GPIO_RELAY                      |
 235                 GPIO_NVDD_ON;
 236                 // (and add GPIO_FPGA_ON)
 237         // These pins are outputs
 238     AT91C_BASE_PIOA->PIO_OER =
 239         GPIO_LED_A                      |
 240                 GPIO_LED_B                      |
 241                 GPIO_LED_C                      |
 242                 GPIO_LED_D                      |
 243                 GPIO_RELAY                      |
 244                 GPIO_NVDD_ON;
 245         // PIO controls the following pins
 246     AT91C_BASE_PIOA->PIO_PER =
 247         GPIO_USB_PU                     |
 248                 GPIO_LED_A                      |
 249                 GPIO_LED_B                      |
 250                 GPIO_LED_C                      |
 251                 GPIO_LED_D;
 252
 253     USB_D_PLUS_PULLUP_OFF();
 254     LED_D_OFF();
 255     LED_C_ON();
 256     LED_B_OFF();
 257     LED_A_OFF();
 258
 259     // if 512K FLASH part - TODO make some defines :)
 260     if ((AT91C_BASE_DBGU->DBGU_CIDR | 0xf00) == 0xa00) {
 261             AT91C_BASE_EFC0->EFC_FMR =
 262                 MC_FLASH_MODE_FLASH_WAIT_STATES(1) |
 263                         MC_FLASH_MODE_MASTER_CLK_IN_MHZ(0x48);
 264             AT91C_BASE_EFC1->EFC_FMR =
 265                 MC_FLASH_MODE_FLASH_WAIT_STATES(1) |
 266                         MC_FLASH_MODE_MASTER_CLK_IN_MHZ(0x48);
 267     } else {
 268             AT91C_BASE_EFC0->EFC_FMR =
 269                 MC_FLASH_MODE_FLASH_WAIT_STATES(0) |
 270                         MC_FLASH_MODE_MASTER_CLK_IN_MHZ(48);
 271     }
 272
 273     // Initialize all system clocks
 274     ConfigClocks();
 275
 276     LED_A_ON();
 277
 278     int common_area_present = 0;
 279     switch(AT91C_BASE_RSTC->RSTC_RSR & AT91C_RSTC_RSTTYP) {
 280     case AT91C_RSTC_RSTTYP_WATCHDOG:
 281     case AT91C_RSTC_RSTTYP_SOFTWARE:
 282     case AT91C_RSTC_RSTTYP_USER:
 283             /* In these cases the common_area in RAM should be ok, retain it if it's there */
 284             if(common_area.magic == COMMON_AREA_MAGIC && common_area.version == 1) {
 285                     common_area_present = 1;
 286             }
 287             break;
 288     default: /* Otherwise, initialize it from scratch */
 289             break;
 290     }
 291
 292     if(!common_area_present){
 293             /* Common area not ok, initialize it */
 294             int i; for(i=0; i<sizeof(common_area); i++) { /* Makeshift memset, no need to drag util.c into this */
 295                     ((char*)&common_area)[i] = 0;
 296             }
 297             common_area.magic = COMMON_AREA_MAGIC;
 298             common_area.version = 1;
 299             common_area.flags.bootrom_present = 1;
 300     }
 301
 302     common_area.flags.bootrom_present = 1;
 303     if(common_area.command == COMMON_AREA_COMMAND_ENTER_FLASH_MODE) {
 304             common_area.command = COMMON_AREA_COMMAND_NONE;
 305             flash_mode(1);
 306     } else if(BUTTON_PRESS()) {
 307             flash_mode(0);
 308     } else if(*(uint32_t*)&_osimage_entry == 0xffffffffU) {
 309             flash_mode(1);
 310     } else {
 311             // jump to Flash address of the osimage entry point (LSBit set for thumb mode)
 312             asm("bx %0\n" : : "r" ( ((int)&_osimage_entry) | 0x1 ) );
 313     }
 314 }