]> git.zerfleddert.de Git - proxmark3-svn/blob - include/at91sam7s512.h
Minor fix, sometimes when data is sent without the pm3 is connected, it causes a...
[proxmark3-svn] / include / at91sam7s512.h
1 // ----------------------------------------------------------------------------
2 // ATMEL Microcontroller Software Support - ROUSSET -
3 // ----------------------------------------------------------------------------
4 // Copyright (c) 2006, Atmel Corporation
5 //
6 // All rights reserved.
7 //
8 // Redistribution and use in source and binary forms, with or without
9 // modification, are permitted provided that the following conditions are met:
10 //
11 // - Redistributions of source code must retain the above copyright notice,
12 // this list of conditions and the disclaimer below.
13 //
14 // Atmel's name may not be used to endorse or promote products derived from
15 // this software without specific prior written permission.
16 //
17 // DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
18 // IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
19 // MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
20 // DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
21 // INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
22 // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
23 // OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
24 // LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
25 // NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
26 // EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 // ----------------------------------------------------------------------------
28 // File Name : AT91SAM7S512.h
29 // Object : AT91SAM7S512 definitions
30 // Generated : AT91 SW Application Group 07/07/2008 (16:13:20)
31 //
32 // CVS Reference : /AT91SAM7S512.pl/1.6/Wed Aug 30 14:08:44 2006//
33 // CVS Reference : /SYS_SAM7S.pl/1.2/Thu Feb 3 10:47:39 2005//
34 // CVS Reference : /MC_SAM7SE.pl/1.10/Thu Feb 16 16:35:28 2006//
35 // CVS Reference : /PMC_SAM7S_USB.pl/1.4/Tue Feb 8 14:00:19 2005//
36 // CVS Reference : /RSTC_SAM7S.pl/1.2/Wed Jul 13 15:25:17 2005//
37 // CVS Reference : /UDP_4ept.pl/1.1/Thu Aug 3 12:26:00 2006//
38 // CVS Reference : /PWM_SAM7S.pl/1.1/Tue May 10 12:38:54 2005//
39 // CVS Reference : /AIC_6075B.pl/1.3/Fri May 20 14:21:42 2005//
40 // CVS Reference : /PIO_6057A.pl/1.2/Thu Feb 3 10:29:42 2005//
41 // CVS Reference : /RTTC_6081A.pl/1.2/Thu Nov 4 13:57:22 2004//
42 // CVS Reference : /PITC_6079A.pl/1.2/Thu Nov 4 13:56:22 2004//
43 // CVS Reference : /WDTC_6080A.pl/1.3/Thu Nov 4 13:58:52 2004//
44 // CVS Reference : /VREG_6085B.pl/1.1/Tue Feb 1 16:40:38 2005//
45 // CVS Reference : /PDC_6074C.pl/1.2/Thu Feb 3 09:02:11 2005//
46 // CVS Reference : /DBGU_6059D.pl/1.1/Mon Jan 31 13:54:41 2005//
47 // CVS Reference : /SPI_6088D.pl/1.3/Fri May 20 14:23:02 2005//
48 // CVS Reference : /US_6089C.pl/1.1/Mon Jan 31 13:56:02 2005//
49 // CVS Reference : /SSC_6078A.pl/1.1/Tue Jul 13 07:10:41 2004//
50 // CVS Reference : /TWI_6061A.pl/1.2/Fri Oct 27 11:40:48 2006//
51 // CVS Reference : /TC_6082A.pl/1.7/Wed Mar 9 16:31:51 2005//
52 // CVS Reference : /ADC_6051C.pl/1.1/Mon Jan 31 13:12:40 2005//
53 // CVS Reference : /EBI_SAM7SE512.pl/1.22/Fri Nov 18 17:47:47 2005//
54 // CVS Reference : /SMC_1783A.pl/1.4/Thu Feb 3 10:30:06 2005//
55 // CVS Reference : /SDRC_SAM7SE512.pl/1.7/Fri Jul 8 07:50:18 2005//
56 // CVS Reference : /HECC_SAM7SE512.pl/1.8/Tue Jul 12 06:31:42 2005//
57 // ----------------------------------------------------------------------------
58
59 #ifndef AT91SAM7S512_H
60 #define AT91SAM7S512_H
61
62 #ifndef __ASSEMBLY__
63 typedef volatile unsigned int AT91_REG;// Hardware register definition
64 #define AT91_CAST(a) (a)
65 #else
66 #define AT91_CAST(a)
67 #endif
68
69 // *****************************************************************************
70 // SOFTWARE API DEFINITION FOR System Peripherals
71 // *****************************************************************************
72 #ifndef __ASSEMBLY__
73 typedef struct _AT91S_SYS {
74 AT91_REG AIC_SMR[32]; // Source Mode Register
75 AT91_REG AIC_SVR[32]; // Source Vector Register
76 AT91_REG AIC_IVR; // IRQ Vector Register
77 AT91_REG AIC_FVR; // FIQ Vector Register
78 AT91_REG AIC_ISR; // Interrupt Status Register
79 AT91_REG AIC_IPR; // Interrupt Pending Register
80 AT91_REG AIC_IMR; // Interrupt Mask Register
81 AT91_REG AIC_CISR; // Core Interrupt Status Register
82 AT91_REG Reserved0[2]; //
83 AT91_REG AIC_IECR; // Interrupt Enable Command Register
84 AT91_REG AIC_IDCR; // Interrupt Disable Command Register
85 AT91_REG AIC_ICCR; // Interrupt Clear Command Register
86 AT91_REG AIC_ISCR; // Interrupt Set Command Register
87 AT91_REG AIC_EOICR; // End of Interrupt Command Register
88 AT91_REG AIC_SPU; // Spurious Vector Register
89 AT91_REG AIC_DCR; // Debug Control Register (Protect)
90 AT91_REG Reserved1[1]; //
91 AT91_REG AIC_FFER; // Fast Forcing Enable Register
92 AT91_REG AIC_FFDR; // Fast Forcing Disable Register
93 AT91_REG AIC_FFSR; // Fast Forcing Status Register
94 AT91_REG Reserved2[45]; //
95 AT91_REG DBGU_CR; // Control Register
96 AT91_REG DBGU_MR; // Mode Register
97 AT91_REG DBGU_IER; // Interrupt Enable Register
98 AT91_REG DBGU_IDR; // Interrupt Disable Register
99 AT91_REG DBGU_IMR; // Interrupt Mask Register
100 AT91_REG DBGU_CSR; // Channel Status Register
101 AT91_REG DBGU_RHR; // Receiver Holding Register
102 AT91_REG DBGU_THR; // Transmitter Holding Register
103 AT91_REG DBGU_BRGR; // Baud Rate Generator Register
104 AT91_REG Reserved3[7]; //
105 AT91_REG DBGU_CIDR; // Chip ID Register
106 AT91_REG DBGU_EXID; // Chip ID Extension Register
107 AT91_REG DBGU_FNTR; // Force NTRST Register
108 AT91_REG Reserved4[45]; //
109 AT91_REG DBGU_RPR; // Receive Pointer Register
110 AT91_REG DBGU_RCR; // Receive Counter Register
111 AT91_REG DBGU_TPR; // Transmit Pointer Register
112 AT91_REG DBGU_TCR; // Transmit Counter Register
113 AT91_REG DBGU_RNPR; // Receive Next Pointer Register
114 AT91_REG DBGU_RNCR; // Receive Next Counter Register
115 AT91_REG DBGU_TNPR; // Transmit Next Pointer Register
116 AT91_REG DBGU_TNCR; // Transmit Next Counter Register
117 AT91_REG DBGU_PTCR; // PDC Transfer Control Register
118 AT91_REG DBGU_PTSR; // PDC Transfer Status Register
119 AT91_REG Reserved5[54]; //
120 AT91_REG PIOA_PER; // PIO Enable Register
121 AT91_REG PIOA_PDR; // PIO Disable Register
122 AT91_REG PIOA_PSR; // PIO Status Register
123 AT91_REG Reserved6[1]; //
124 AT91_REG PIOA_OER; // Output Enable Register
125 AT91_REG PIOA_ODR; // Output Disable Registerr
126 AT91_REG PIOA_OSR; // Output Status Register
127 AT91_REG Reserved7[1]; //
128 AT91_REG PIOA_IFER; // Input Filter Enable Register
129 AT91_REG PIOA_IFDR; // Input Filter Disable Register
130 AT91_REG PIOA_IFSR; // Input Filter Status Register
131 AT91_REG Reserved8[1]; //
132 AT91_REG PIOA_SODR; // Set Output Data Register
133 AT91_REG PIOA_CODR; // Clear Output Data Register
134 AT91_REG PIOA_ODSR; // Output Data Status Register
135 AT91_REG PIOA_PDSR; // Pin Data Status Register
136 AT91_REG PIOA_IER; // Interrupt Enable Register
137 AT91_REG PIOA_IDR; // Interrupt Disable Register
138 AT91_REG PIOA_IMR; // Interrupt Mask Register
139 AT91_REG PIOA_ISR; // Interrupt Status Register
140 AT91_REG PIOA_MDER; // Multi-driver Enable Register
141 AT91_REG PIOA_MDDR; // Multi-driver Disable Register
142 AT91_REG PIOA_MDSR; // Multi-driver Status Register
143 AT91_REG Reserved9[1]; //
144 AT91_REG PIOA_PPUDR; // Pull-up Disable Register
145 AT91_REG PIOA_PPUER; // Pull-up Enable Register
146 AT91_REG PIOA_PPUSR; // Pull-up Status Register
147 AT91_REG Reserved10[1]; //
148 AT91_REG PIOA_ASR; // Select A Register
149 AT91_REG PIOA_BSR; // Select B Register
150 AT91_REG PIOA_ABSR; // AB Select Status Register
151 AT91_REG Reserved11[9]; //
152 AT91_REG PIOA_OWER; // Output Write Enable Register
153 AT91_REG PIOA_OWDR; // Output Write Disable Register
154 AT91_REG PIOA_OWSR; // Output Write Status Register
155 AT91_REG Reserved12[469]; //
156 AT91_REG PMC_SCER; // System Clock Enable Register
157 AT91_REG PMC_SCDR; // System Clock Disable Register
158 AT91_REG PMC_SCSR; // System Clock Status Register
159 AT91_REG Reserved13[1]; //
160 AT91_REG PMC_PCER; // Peripheral Clock Enable Register
161 AT91_REG PMC_PCDR; // Peripheral Clock Disable Register
162 AT91_REG PMC_PCSR; // Peripheral Clock Status Register
163 AT91_REG Reserved14[1]; //
164 AT91_REG PMC_MOR; // Main Oscillator Register
165 AT91_REG PMC_MCFR; // Main Clock Frequency Register
166 AT91_REG Reserved15[1]; //
167 AT91_REG PMC_PLLR; // PLL Register
168 AT91_REG PMC_MCKR; // Master Clock Register
169 AT91_REG Reserved16[3]; //
170 AT91_REG PMC_PCKR[3]; // Programmable Clock Register
171 AT91_REG Reserved17[5]; //
172 AT91_REG PMC_IER; // Interrupt Enable Register
173 AT91_REG PMC_IDR; // Interrupt Disable Register
174 AT91_REG PMC_SR; // Status Register
175 AT91_REG PMC_IMR; // Interrupt Mask Register
176 AT91_REG Reserved18[36]; //
177 AT91_REG RSTC_RCR; // Reset Control Register
178 AT91_REG RSTC_RSR; // Reset Status Register
179 AT91_REG RSTC_RMR; // Reset Mode Register
180 AT91_REG Reserved19[5]; //
181 AT91_REG RTTC_RTMR; // Real-time Mode Register
182 AT91_REG RTTC_RTAR; // Real-time Alarm Register
183 AT91_REG RTTC_RTVR; // Real-time Value Register
184 AT91_REG RTTC_RTSR; // Real-time Status Register
185 AT91_REG PITC_PIMR; // Period Interval Mode Register
186 AT91_REG PITC_PISR; // Period Interval Status Register
187 AT91_REG PITC_PIVR; // Period Interval Value Register
188 AT91_REG PITC_PIIR; // Period Interval Image Register
189 AT91_REG WDTC_WDCR; // Watchdog Control Register
190 AT91_REG WDTC_WDMR; // Watchdog Mode Register
191 AT91_REG WDTC_WDSR; // Watchdog Status Register
192 AT91_REG Reserved20[5]; //
193 AT91_REG VREG_MR; // Voltage Regulator Mode Register
194 } AT91S_SYS, *AT91PS_SYS;
195 #else
196
197 #endif
198
199 // *****************************************************************************
200 // SOFTWARE API DEFINITION FOR Advanced Interrupt Controller
201 // *****************************************************************************
202 #ifndef __ASSEMBLY__
203 typedef struct _AT91S_AIC {
204 AT91_REG AIC_SMR[32]; // Source Mode Register
205 AT91_REG AIC_SVR[32]; // Source Vector Register
206 AT91_REG AIC_IVR; // IRQ Vector Register
207 AT91_REG AIC_FVR; // FIQ Vector Register
208 AT91_REG AIC_ISR; // Interrupt Status Register
209 AT91_REG AIC_IPR; // Interrupt Pending Register
210 AT91_REG AIC_IMR; // Interrupt Mask Register
211 AT91_REG AIC_CISR; // Core Interrupt Status Register
212 AT91_REG Reserved0[2]; //
213 AT91_REG AIC_IECR; // Interrupt Enable Command Register
214 AT91_REG AIC_IDCR; // Interrupt Disable Command Register
215 AT91_REG AIC_ICCR; // Interrupt Clear Command Register
216 AT91_REG AIC_ISCR; // Interrupt Set Command Register
217 AT91_REG AIC_EOICR; // End of Interrupt Command Register
218 AT91_REG AIC_SPU; // Spurious Vector Register
219 AT91_REG AIC_DCR; // Debug Control Register (Protect)
220 AT91_REG Reserved1[1]; //
221 AT91_REG AIC_FFER; // Fast Forcing Enable Register
222 AT91_REG AIC_FFDR; // Fast Forcing Disable Register
223 AT91_REG AIC_FFSR; // Fast Forcing Status Register
224 } AT91S_AIC, *AT91PS_AIC;
225 #else
226 #define AIC_SMR (AT91_CAST(AT91_REG *) 0x00000000) // (AIC_SMR) Source Mode Register
227 #define AIC_SVR (AT91_CAST(AT91_REG *) 0x00000080) // (AIC_SVR) Source Vector Register
228 #define AIC_IVR (AT91_CAST(AT91_REG *) 0x00000100) // (AIC_IVR) IRQ Vector Register
229 #define AIC_FVR (AT91_CAST(AT91_REG *) 0x00000104) // (AIC_FVR) FIQ Vector Register
230 #define AIC_ISR (AT91_CAST(AT91_REG *) 0x00000108) // (AIC_ISR) Interrupt Status Register
231 #define AIC_IPR (AT91_CAST(AT91_REG *) 0x0000010C) // (AIC_IPR) Interrupt Pending Register
232 #define AIC_IMR (AT91_CAST(AT91_REG *) 0x00000110) // (AIC_IMR) Interrupt Mask Register
233 #define AIC_CISR (AT91_CAST(AT91_REG *) 0x00000114) // (AIC_CISR) Core Interrupt Status Register
234 #define AIC_IECR (AT91_CAST(AT91_REG *) 0x00000120) // (AIC_IECR) Interrupt Enable Command Register
235 #define AIC_IDCR (AT91_CAST(AT91_REG *) 0x00000124) // (AIC_IDCR) Interrupt Disable Command Register
236 #define AIC_ICCR (AT91_CAST(AT91_REG *) 0x00000128) // (AIC_ICCR) Interrupt Clear Command Register
237 #define AIC_ISCR (AT91_CAST(AT91_REG *) 0x0000012C) // (AIC_ISCR) Interrupt Set Command Register
238 #define AIC_EOICR (AT91_CAST(AT91_REG *) 0x00000130) // (AIC_EOICR) End of Interrupt Command Register
239 #define AIC_SPU (AT91_CAST(AT91_REG *) 0x00000134) // (AIC_SPU) Spurious Vector Register
240 #define AIC_DCR (AT91_CAST(AT91_REG *) 0x00000138) // (AIC_DCR) Debug Control Register (Protect)
241 #define AIC_FFER (AT91_CAST(AT91_REG *) 0x00000140) // (AIC_FFER) Fast Forcing Enable Register
242 #define AIC_FFDR (AT91_CAST(AT91_REG *) 0x00000144) // (AIC_FFDR) Fast Forcing Disable Register
243 #define AIC_FFSR (AT91_CAST(AT91_REG *) 0x00000148) // (AIC_FFSR) Fast Forcing Status Register
244
245 #endif
246 // -------- AIC_SMR : (AIC Offset: 0x0) Control Register --------
247 #define AT91C_AIC_PRIOR (0x7 << 0) // (AIC) Priority Level
248 #define AT91C_AIC_PRIOR_LOWEST (0x0) // (AIC) Lowest priority level
249 #define AT91C_AIC_PRIOR_HIGHEST (0x7) // (AIC) Highest priority level
250 #define AT91C_AIC_SRCTYPE (0x3 << 5) // (AIC) Interrupt Source Type
251 #define AT91C_AIC_SRCTYPE_INT_HIGH_LEVEL (0x0 << 5) // (AIC) Internal Sources Code Label High-level Sensitive
252 #define AT91C_AIC_SRCTYPE_EXT_LOW_LEVEL (0x0 << 5) // (AIC) External Sources Code Label Low-level Sensitive
253 #define AT91C_AIC_SRCTYPE_INT_POSITIVE_EDGE (0x1 << 5) // (AIC) Internal Sources Code Label Positive Edge triggered
254 #define AT91C_AIC_SRCTYPE_EXT_NEGATIVE_EDGE (0x1 << 5) // (AIC) External Sources Code Label Negative Edge triggered
255 #define AT91C_AIC_SRCTYPE_HIGH_LEVEL (0x2 << 5) // (AIC) Internal Or External Sources Code Label High-level Sensitive
256 #define AT91C_AIC_SRCTYPE_POSITIVE_EDGE (0x3 << 5) // (AIC) Internal Or External Sources Code Label Positive Edge triggered
257 // -------- AIC_CISR : (AIC Offset: 0x114) AIC Core Interrupt Status Register --------
258 #define AT91C_AIC_NFIQ (0x1 << 0) // (AIC) NFIQ Status
259 #define AT91C_AIC_NIRQ (0x1 << 1) // (AIC) NIRQ Status
260 // -------- AIC_DCR : (AIC Offset: 0x138) AIC Debug Control Register (Protect) --------
261 #define AT91C_AIC_DCR_PROT (0x1 << 0) // (AIC) Protection Mode
262 #define AT91C_AIC_DCR_GMSK (0x1 << 1) // (AIC) General Mask
263
264 // *****************************************************************************
265 // SOFTWARE API DEFINITION FOR Peripheral DMA Controller
266 // *****************************************************************************
267 #ifndef __ASSEMBLY__
268 typedef struct _AT91S_PDC {
269 AT91_REG PDC_RPR; // Receive Pointer Register
270 AT91_REG PDC_RCR; // Receive Counter Register
271 AT91_REG PDC_TPR; // Transmit Pointer Register
272 AT91_REG PDC_TCR; // Transmit Counter Register
273 AT91_REG PDC_RNPR; // Receive Next Pointer Register
274 AT91_REG PDC_RNCR; // Receive Next Counter Register
275 AT91_REG PDC_TNPR; // Transmit Next Pointer Register
276 AT91_REG PDC_TNCR; // Transmit Next Counter Register
277 AT91_REG PDC_PTCR; // PDC Transfer Control Register
278 AT91_REG PDC_PTSR; // PDC Transfer Status Register
279 } AT91S_PDC, *AT91PS_PDC;
280 #else
281 #define PDC_RPR (AT91_CAST(AT91_REG *) 0x00000000) // (PDC_RPR) Receive Pointer Register
282 #define PDC_RCR (AT91_CAST(AT91_REG *) 0x00000004) // (PDC_RCR) Receive Counter Register
283 #define PDC_TPR (AT91_CAST(AT91_REG *) 0x00000008) // (PDC_TPR) Transmit Pointer Register
284 #define PDC_TCR (AT91_CAST(AT91_REG *) 0x0000000C) // (PDC_TCR) Transmit Counter Register
285 #define PDC_RNPR (AT91_CAST(AT91_REG *) 0x00000010) // (PDC_RNPR) Receive Next Pointer Register
286 #define PDC_RNCR (AT91_CAST(AT91_REG *) 0x00000014) // (PDC_RNCR) Receive Next Counter Register
287 #define PDC_TNPR (AT91_CAST(AT91_REG *) 0x00000018) // (PDC_TNPR) Transmit Next Pointer Register
288 #define PDC_TNCR (AT91_CAST(AT91_REG *) 0x0000001C) // (PDC_TNCR) Transmit Next Counter Register
289 #define PDC_PTCR (AT91_CAST(AT91_REG *) 0x00000020) // (PDC_PTCR) PDC Transfer Control Register
290 #define PDC_PTSR (AT91_CAST(AT91_REG *) 0x00000024) // (PDC_PTSR) PDC Transfer Status Register
291
292 #endif
293 // -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register --------
294 #define AT91C_PDC_RXTEN (0x1 << 0) // (PDC) Receiver Transfer Enable
295 #define AT91C_PDC_RXTDIS (0x1 << 1) // (PDC) Receiver Transfer Disable
296 #define AT91C_PDC_TXTEN (0x1 << 8) // (PDC) Transmitter Transfer Enable
297 #define AT91C_PDC_TXTDIS (0x1 << 9) // (PDC) Transmitter Transfer Disable
298 // -------- PDC_PTSR : (PDC Offset: 0x24) PDC Transfer Status Register --------
299
300 // *****************************************************************************
301 // SOFTWARE API DEFINITION FOR Debug Unit
302 // *****************************************************************************
303 #ifndef __ASSEMBLY__
304 typedef struct _AT91S_DBGU {
305 AT91_REG DBGU_CR; // Control Register
306 AT91_REG DBGU_MR; // Mode Register
307 AT91_REG DBGU_IER; // Interrupt Enable Register
308 AT91_REG DBGU_IDR; // Interrupt Disable Register
309 AT91_REG DBGU_IMR; // Interrupt Mask Register
310 AT91_REG DBGU_CSR; // Channel Status Register
311 AT91_REG DBGU_RHR; // Receiver Holding Register
312 AT91_REG DBGU_THR; // Transmitter Holding Register
313 AT91_REG DBGU_BRGR; // Baud Rate Generator Register
314 AT91_REG Reserved0[7]; //
315 AT91_REG DBGU_CIDR; // Chip ID Register
316 AT91_REG DBGU_EXID; // Chip ID Extension Register
317 AT91_REG DBGU_FNTR; // Force NTRST Register
318 AT91_REG Reserved1[45]; //
319 AT91_REG DBGU_RPR; // Receive Pointer Register
320 AT91_REG DBGU_RCR; // Receive Counter Register
321 AT91_REG DBGU_TPR; // Transmit Pointer Register
322 AT91_REG DBGU_TCR; // Transmit Counter Register
323 AT91_REG DBGU_RNPR; // Receive Next Pointer Register
324 AT91_REG DBGU_RNCR; // Receive Next Counter Register
325 AT91_REG DBGU_TNPR; // Transmit Next Pointer Register
326 AT91_REG DBGU_TNCR; // Transmit Next Counter Register
327 AT91_REG DBGU_PTCR; // PDC Transfer Control Register
328 AT91_REG DBGU_PTSR; // PDC Transfer Status Register
329 } AT91S_DBGU, *AT91PS_DBGU;
330 #else
331 #define DBGU_CR (AT91_CAST(AT91_REG *) 0x00000000) // (DBGU_CR) Control Register
332 #define DBGU_MR (AT91_CAST(AT91_REG *) 0x00000004) // (DBGU_MR) Mode Register
333 #define DBGU_IER (AT91_CAST(AT91_REG *) 0x00000008) // (DBGU_IER) Interrupt Enable Register
334 #define DBGU_IDR (AT91_CAST(AT91_REG *) 0x0000000C) // (DBGU_IDR) Interrupt Disable Register
335 #define DBGU_IMR (AT91_CAST(AT91_REG *) 0x00000010) // (DBGU_IMR) Interrupt Mask Register
336 #define DBGU_CSR (AT91_CAST(AT91_REG *) 0x00000014) // (DBGU_CSR) Channel Status Register
337 #define DBGU_RHR (AT91_CAST(AT91_REG *) 0x00000018) // (DBGU_RHR) Receiver Holding Register
338 #define DBGU_THR (AT91_CAST(AT91_REG *) 0x0000001C) // (DBGU_THR) Transmitter Holding Register
339 #define DBGU_BRGR (AT91_CAST(AT91_REG *) 0x00000020) // (DBGU_BRGR) Baud Rate Generator Register
340 //#define DBGU_CIDR (AT91_CAST(AT91_REG *) 0x00000040) // (DBGU_CIDR) Chip ID Register
341 #define DBGU_EXID (AT91_CAST(AT91_REG *) 0x00000044) // (DBGU_EXID) Chip ID Extension Register
342 #define DBGU_FNTR (AT91_CAST(AT91_REG *) 0x00000048) // (DBGU_FNTR) Force NTRST Register
343
344 #endif
345 // -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register --------
346 #define AT91C_US_RSTRX (0x1 << 2) // (DBGU) Reset Receiver
347 #define AT91C_US_RSTTX (0x1 << 3) // (DBGU) Reset Transmitter
348 #define AT91C_US_RXEN (0x1 << 4) // (DBGU) Receiver Enable
349 #define AT91C_US_RXDIS (0x1 << 5) // (DBGU) Receiver Disable
350 #define AT91C_US_TXEN (0x1 << 6) // (DBGU) Transmitter Enable
351 #define AT91C_US_TXDIS (0x1 << 7) // (DBGU) Transmitter Disable
352 #define AT91C_US_RSTSTA (0x1 << 8) // (DBGU) Reset Status Bits
353 // -------- DBGU_MR : (DBGU Offset: 0x4) Debug Unit Mode Register --------
354 #define AT91C_US_PAR (0x7 << 9) // (DBGU) Parity type
355 #define AT91C_US_PAR_EVEN (0x0 << 9) // (DBGU) Even Parity
356 #define AT91C_US_PAR_ODD (0x1 << 9) // (DBGU) Odd Parity
357 #define AT91C_US_PAR_SPACE (0x2 << 9) // (DBGU) Parity forced to 0 (Space)
358 #define AT91C_US_PAR_MARK (0x3 << 9) // (DBGU) Parity forced to 1 (Mark)
359 #define AT91C_US_PAR_NONE (0x4 << 9) // (DBGU) No Parity
360 #define AT91C_US_PAR_MULTI_DROP (0x6 << 9) // (DBGU) Multi-drop mode
361 #define AT91C_US_CHMODE (0x3 << 14) // (DBGU) Channel Mode
362 #define AT91C_US_CHMODE_NORMAL (0x0 << 14) // (DBGU) Normal Mode: The USART channel operates as an RX/TX USART.
363 #define AT91C_US_CHMODE_AUTO (0x1 << 14) // (DBGU) Automatic Echo: Receiver Data Input is connected to the TXD pin.
364 #define AT91C_US_CHMODE_LOCAL (0x2 << 14) // (DBGU) Local Loopback: Transmitter Output Signal is connected to Receiver Input Signal.
365 #define AT91C_US_CHMODE_REMOTE (0x3 << 14) // (DBGU) Remote Loopback: RXD pin is internally connected to TXD pin.
366 // -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register --------
367 #define AT91C_US_RXRDY (0x1 << 0) // (DBGU) RXRDY Interrupt
368 #define AT91C_US_TXRDY (0x1 << 1) // (DBGU) TXRDY Interrupt
369 #define AT91C_US_ENDRX (0x1 << 3) // (DBGU) End of Receive Transfer Interrupt
370 #define AT91C_US_ENDTX (0x1 << 4) // (DBGU) End of Transmit Interrupt
371 #define AT91C_US_OVRE (0x1 << 5) // (DBGU) Overrun Interrupt
372 #define AT91C_US_FRAME (0x1 << 6) // (DBGU) Framing Error Interrupt
373 #define AT91C_US_PARE (0x1 << 7) // (DBGU) Parity Error Interrupt
374 #define AT91C_US_TXEMPTY (0x1 << 9) // (DBGU) TXEMPTY Interrupt
375 #define AT91C_US_TXBUFE (0x1 << 11) // (DBGU) TXBUFE Interrupt
376 #define AT91C_US_RXBUFF (0x1 << 12) // (DBGU) RXBUFF Interrupt
377 #define AT91C_US_COMM_TX (0x1 << 30) // (DBGU) COMM_TX Interrupt
378 #define AT91C_US_COMM_RX (0x1 << 31) // (DBGU) COMM_RX Interrupt
379 // -------- DBGU_IDR : (DBGU Offset: 0xc) Debug Unit Interrupt Disable Register --------
380 // -------- DBGU_IMR : (DBGU Offset: 0x10) Debug Unit Interrupt Mask Register --------
381 // -------- DBGU_CSR : (DBGU Offset: 0x14) Debug Unit Channel Status Register --------
382 // -------- DBGU_FNTR : (DBGU Offset: 0x48) Debug Unit FORCE_NTRST Register --------
383 #define AT91C_US_FORCE_NTRST (0x1 << 0) // (DBGU) Force NTRST in JTAG
384
385 // *****************************************************************************
386 // SOFTWARE API DEFINITION FOR Parallel Input Output Controler
387 // *****************************************************************************
388 #ifndef __ASSEMBLY__
389 typedef struct _AT91S_PIO {
390 AT91_REG PIO_PER; // PIO Enable Register
391 AT91_REG PIO_PDR; // PIO Disable Register
392 AT91_REG PIO_PSR; // PIO Status Register
393 AT91_REG Reserved0[1]; //
394 AT91_REG PIO_OER; // Output Enable Register
395 AT91_REG PIO_ODR; // Output Disable Registerr
396 AT91_REG PIO_OSR; // Output Status Register
397 AT91_REG Reserved1[1]; //
398 AT91_REG PIO_IFER; // Input Filter Enable Register
399 AT91_REG PIO_IFDR; // Input Filter Disable Register
400 AT91_REG PIO_IFSR; // Input Filter Status Register
401 AT91_REG Reserved2[1]; //
402 AT91_REG PIO_SODR; // Set Output Data Register
403 AT91_REG PIO_CODR; // Clear Output Data Register
404 AT91_REG PIO_ODSR; // Output Data Status Register
405 AT91_REG PIO_PDSR; // Pin Data Status Register
406 AT91_REG PIO_IER; // Interrupt Enable Register
407 AT91_REG PIO_IDR; // Interrupt Disable Register
408 AT91_REG PIO_IMR; // Interrupt Mask Register
409 AT91_REG PIO_ISR; // Interrupt Status Register
410 AT91_REG PIO_MDER; // Multi-driver Enable Register
411 AT91_REG PIO_MDDR; // Multi-driver Disable Register
412 AT91_REG PIO_MDSR; // Multi-driver Status Register
413 AT91_REG Reserved3[1]; //
414 AT91_REG PIO_PPUDR; // Pull-up Disable Register
415 AT91_REG PIO_PPUER; // Pull-up Enable Register
416 AT91_REG PIO_PPUSR; // Pull-up Status Register
417 AT91_REG Reserved4[1]; //
418 AT91_REG PIO_ASR; // Select A Register
419 AT91_REG PIO_BSR; // Select B Register
420 AT91_REG PIO_ABSR; // AB Select Status Register
421 AT91_REG Reserved5[9]; //
422 AT91_REG PIO_OWER; // Output Write Enable Register
423 AT91_REG PIO_OWDR; // Output Write Disable Register
424 AT91_REG PIO_OWSR; // Output Write Status Register
425 } AT91S_PIO, *AT91PS_PIO;
426 #else
427 #define PIO_PER (AT91_CAST(AT91_REG *) 0x00000000) // (PIO_PER) PIO Enable Register
428 #define PIO_PDR (AT91_CAST(AT91_REG *) 0x00000004) // (PIO_PDR) PIO Disable Register
429 #define PIO_PSR (AT91_CAST(AT91_REG *) 0x00000008) // (PIO_PSR) PIO Status Register
430 #define PIO_OER (AT91_CAST(AT91_REG *) 0x00000010) // (PIO_OER) Output Enable Register
431 #define PIO_ODR (AT91_CAST(AT91_REG *) 0x00000014) // (PIO_ODR) Output Disable Registerr
432 #define PIO_OSR (AT91_CAST(AT91_REG *) 0x00000018) // (PIO_OSR) Output Status Register
433 #define PIO_IFER (AT91_CAST(AT91_REG *) 0x00000020) // (PIO_IFER) Input Filter Enable Register
434 #define PIO_IFDR (AT91_CAST(AT91_REG *) 0x00000024) // (PIO_IFDR) Input Filter Disable Register
435 #define PIO_IFSR (AT91_CAST(AT91_REG *) 0x00000028) // (PIO_IFSR) Input Filter Status Register
436 #define PIO_SODR (AT91_CAST(AT91_REG *) 0x00000030) // (PIO_SODR) Set Output Data Register
437 #define PIO_CODR (AT91_CAST(AT91_REG *) 0x00000034) // (PIO_CODR) Clear Output Data Register
438 #define PIO_ODSR (AT91_CAST(AT91_REG *) 0x00000038) // (PIO_ODSR) Output Data Status Register
439 #define PIO_PDSR (AT91_CAST(AT91_REG *) 0x0000003C) // (PIO_PDSR) Pin Data Status Register
440 #define PIO_IER (AT91_CAST(AT91_REG *) 0x00000040) // (PIO_IER) Interrupt Enable Register
441 #define PIO_IDR (AT91_CAST(AT91_REG *) 0x00000044) // (PIO_IDR) Interrupt Disable Register
442 #define PIO_IMR (AT91_CAST(AT91_REG *) 0x00000048) // (PIO_IMR) Interrupt Mask Register
443 #define PIO_ISR (AT91_CAST(AT91_REG *) 0x0000004C) // (PIO_ISR) Interrupt Status Register
444 #define PIO_MDER (AT91_CAST(AT91_REG *) 0x00000050) // (PIO_MDER) Multi-driver Enable Register
445 #define PIO_MDDR (AT91_CAST(AT91_REG *) 0x00000054) // (PIO_MDDR) Multi-driver Disable Register
446 #define PIO_MDSR (AT91_CAST(AT91_REG *) 0x00000058) // (PIO_MDSR) Multi-driver Status Register
447 #define PIO_PPUDR (AT91_CAST(AT91_REG *) 0x00000060) // (PIO_PPUDR) Pull-up Disable Register
448 #define PIO_PPUER (AT91_CAST(AT91_REG *) 0x00000064) // (PIO_PPUER) Pull-up Enable Register
449 #define PIO_PPUSR (AT91_CAST(AT91_REG *) 0x00000068) // (PIO_PPUSR) Pull-up Status Register
450 #define PIO_ASR (AT91_CAST(AT91_REG *) 0x00000070) // (PIO_ASR) Select A Register
451 #define PIO_BSR (AT91_CAST(AT91_REG *) 0x00000074) // (PIO_BSR) Select B Register
452 #define PIO_ABSR (AT91_CAST(AT91_REG *) 0x00000078) // (PIO_ABSR) AB Select Status Register
453 #define PIO_OWER (AT91_CAST(AT91_REG *) 0x000000A0) // (PIO_OWER) Output Write Enable Register
454 #define PIO_OWDR (AT91_CAST(AT91_REG *) 0x000000A4) // (PIO_OWDR) Output Write Disable Register
455 #define PIO_OWSR (AT91_CAST(AT91_REG *) 0x000000A8) // (PIO_OWSR) Output Write Status Register
456
457 #endif
458
459 // *****************************************************************************
460 // SOFTWARE API DEFINITION FOR Clock Generator Controler
461 // *****************************************************************************
462 #ifndef __ASSEMBLY__
463 typedef struct _AT91S_CKGR {
464 AT91_REG CKGR_MOR; // Main Oscillator Register
465 AT91_REG CKGR_MCFR; // Main Clock Frequency Register
466 AT91_REG Reserved0[1]; //
467 AT91_REG CKGR_PLLR; // PLL Register
468 } AT91S_CKGR, *AT91PS_CKGR;
469 #else
470 #define CKGR_MOR (AT91_CAST(AT91_REG *) 0x00000000) // (CKGR_MOR) Main Oscillator Register
471 #define CKGR_MCFR (AT91_CAST(AT91_REG *) 0x00000004) // (CKGR_MCFR) Main Clock Frequency Register
472 #define CKGR_PLLR (AT91_CAST(AT91_REG *) 0x0000000C) // (CKGR_PLLR) PLL Register
473
474 #endif
475 // -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register --------
476 #define AT91C_CKGR_MOSCEN (0x1 << 0) // (CKGR) Main Oscillator Enable
477 #define AT91C_CKGR_OSCBYPASS (0x1 << 1) // (CKGR) Main Oscillator Bypass
478 #define AT91C_CKGR_OSCOUNT (0xFF << 8) // (CKGR) Main Oscillator Start-up Time
479 // -------- CKGR_MCFR : (CKGR Offset: 0x4) Main Clock Frequency Register --------
480 #define AT91C_CKGR_MAINF (0xFFFF << 0) // (CKGR) Main Clock Frequency
481 #define AT91C_CKGR_MAINRDY (0x1 << 16) // (CKGR) Main Clock Ready
482 // -------- CKGR_PLLR : (CKGR Offset: 0xc) PLL B Register --------
483 #define AT91C_CKGR_DIV (0xFF << 0) // (CKGR) Divider Selected
484 #define AT91C_CKGR_DIV_0 (0x0) // (CKGR) Divider output is 0
485 #define AT91C_CKGR_DIV_BYPASS (0x1) // (CKGR) Divider is bypassed
486 #define AT91C_CKGR_PLLCOUNT (0x3F << 8) // (CKGR) PLL Counter
487 #define AT91C_CKGR_OUT (0x3 << 14) // (CKGR) PLL Output Frequency Range
488 #define AT91C_CKGR_OUT_0 (0x0 << 14) // (CKGR) Please refer to the PLL datasheet
489 #define AT91C_CKGR_OUT_1 (0x1 << 14) // (CKGR) Please refer to the PLL datasheet
490 #define AT91C_CKGR_OUT_2 (0x2 << 14) // (CKGR) Please refer to the PLL datasheet
491 #define AT91C_CKGR_OUT_3 (0x3 << 14) // (CKGR) Please refer to the PLL datasheet
492 #define AT91C_CKGR_MUL (0x7FF << 16) // (CKGR) PLL Multiplier
493 #define AT91C_CKGR_USBDIV (0x3 << 28) // (CKGR) Divider for USB Clocks
494 #define AT91C_CKGR_USBDIV_0 (0x0 << 28) // (CKGR) Divider output is PLL clock output
495 #define AT91C_CKGR_USBDIV_1 (0x1 << 28) // (CKGR) Divider output is PLL clock output divided by 2
496 #define AT91C_CKGR_USBDIV_2 (0x2 << 28) // (CKGR) Divider output is PLL clock output divided by 4
497
498 // *****************************************************************************
499 // SOFTWARE API DEFINITION FOR Power Management Controler
500 // *****************************************************************************
501 #ifndef __ASSEMBLY__
502 typedef struct _AT91S_PMC {
503 AT91_REG PMC_SCER; // System Clock Enable Register
504 AT91_REG PMC_SCDR; // System Clock Disable Register
505 AT91_REG PMC_SCSR; // System Clock Status Register
506 AT91_REG Reserved0[1]; //
507 AT91_REG PMC_PCER; // Peripheral Clock Enable Register
508 AT91_REG PMC_PCDR; // Peripheral Clock Disable Register
509 AT91_REG PMC_PCSR; // Peripheral Clock Status Register
510 AT91_REG Reserved1[1]; //
511 AT91_REG PMC_MOR; // Main Oscillator Register
512 AT91_REG PMC_MCFR; // Main Clock Frequency Register
513 AT91_REG Reserved2[1]; //
514 AT91_REG PMC_PLLR; // PLL Register
515 AT91_REG PMC_MCKR; // Master Clock Register
516 AT91_REG Reserved3[3]; //
517 AT91_REG PMC_PCKR[3]; // Programmable Clock Register
518 AT91_REG Reserved4[5]; //
519 AT91_REG PMC_IER; // Interrupt Enable Register
520 AT91_REG PMC_IDR; // Interrupt Disable Register
521 AT91_REG PMC_SR; // Status Register
522 AT91_REG PMC_IMR; // Interrupt Mask Register
523 } AT91S_PMC, *AT91PS_PMC;
524 #else
525 #define PMC_SCER (AT91_CAST(AT91_REG *) 0x00000000) // (PMC_SCER) System Clock Enable Register
526 #define PMC_SCDR (AT91_CAST(AT91_REG *) 0x00000004) // (PMC_SCDR) System Clock Disable Register
527 #define PMC_SCSR (AT91_CAST(AT91_REG *) 0x00000008) // (PMC_SCSR) System Clock Status Register
528 #define PMC_PCER (AT91_CAST(AT91_REG *) 0x00000010) // (PMC_PCER) Peripheral Clock Enable Register
529 #define PMC_PCDR (AT91_CAST(AT91_REG *) 0x00000014) // (PMC_PCDR) Peripheral Clock Disable Register
530 #define PMC_PCSR (AT91_CAST(AT91_REG *) 0x00000018) // (PMC_PCSR) Peripheral Clock Status Register
531 #define PMC_MCKR (AT91_CAST(AT91_REG *) 0x00000030) // (PMC_MCKR) Master Clock Register
532 #define PMC_PCKR (AT91_CAST(AT91_REG *) 0x00000040) // (PMC_PCKR) Programmable Clock Register
533 #define PMC_IER (AT91_CAST(AT91_REG *) 0x00000060) // (PMC_IER) Interrupt Enable Register
534 #define PMC_IDR (AT91_CAST(AT91_REG *) 0x00000064) // (PMC_IDR) Interrupt Disable Register
535 #define PMC_SR (AT91_CAST(AT91_REG *) 0x00000068) // (PMC_SR) Status Register
536 #define PMC_IMR (AT91_CAST(AT91_REG *) 0x0000006C) // (PMC_IMR) Interrupt Mask Register
537
538 #endif
539 // -------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register --------
540 #define AT91C_PMC_PCK (0x1 << 0) // (PMC) Processor Clock
541 #define AT91C_PMC_UDP (0x1 << 7) // (PMC) USB Device Port Clock
542 #define AT91C_PMC_PCK0 (0x1 << 8) // (PMC) Programmable Clock Output
543 #define AT91C_PMC_PCK1 (0x1 << 9) // (PMC) Programmable Clock Output
544 #define AT91C_PMC_PCK2 (0x1 << 10) // (PMC) Programmable Clock Output
545 // -------- PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register --------
546 // -------- PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register --------
547 // -------- CKGR_MOR : (PMC Offset: 0x20) Main Oscillator Register --------
548 // -------- CKGR_MCFR : (PMC Offset: 0x24) Main Clock Frequency Register --------
549 // -------- CKGR_PLLR : (PMC Offset: 0x2c) PLL B Register --------
550 // -------- PMC_MCKR : (PMC Offset: 0x30) Master Clock Register --------
551 #define AT91C_PMC_CSS (0x3 << 0) // (PMC) Programmable Clock Selection
552 #define AT91C_PMC_CSS_SLOW_CLK (0x0) // (PMC) Slow Clock is selected
553 #define AT91C_PMC_CSS_MAIN_CLK (0x1) // (PMC) Main Clock is selected
554 #define AT91C_PMC_CSS_PLL_CLK (0x3) // (PMC) Clock from PLL is selected
555 #define AT91C_PMC_PRES (0x7 << 2) // (PMC) Programmable Clock Prescaler
556 #define AT91C_PMC_PRES_CLK (0x0 << 2) // (PMC) Selected clock
557 #define AT91C_PMC_PRES_CLK_2 (0x1 << 2) // (PMC) Selected clock divided by 2
558 #define AT91C_PMC_PRES_CLK_4 (0x2 << 2) // (PMC) Selected clock divided by 4
559 #define AT91C_PMC_PRES_CLK_8 (0x3 << 2) // (PMC) Selected clock divided by 8
560 #define AT91C_PMC_PRES_CLK_16 (0x4 << 2) // (PMC) Selected clock divided by 16
561 #define AT91C_PMC_PRES_CLK_32 (0x5 << 2) // (PMC) Selected clock divided by 32
562 #define AT91C_PMC_PRES_CLK_64 (0x6 << 2) // (PMC) Selected clock divided by 64
563 // -------- PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register --------
564 // -------- PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register --------
565 #define AT91C_PMC_MOSCS (0x1 << 0) // (PMC) MOSC Status/Enable/Disable/Mask
566 #define AT91C_PMC_LOCK (0x1 << 2) // (PMC) PLL Status/Enable/Disable/Mask
567 #define AT91C_PMC_MCKRDY (0x1 << 3) // (PMC) MCK_RDY Status/Enable/Disable/Mask
568 #define AT91C_PMC_PCK0RDY (0x1 << 8) // (PMC) PCK0_RDY Status/Enable/Disable/Mask
569 #define AT91C_PMC_PCK1RDY (0x1 << 9) // (PMC) PCK1_RDY Status/Enable/Disable/Mask
570 #define AT91C_PMC_PCK2RDY (0x1 << 10) // (PMC) PCK2_RDY Status/Enable/Disable/Mask
571 // -------- PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register --------
572 // -------- PMC_SR : (PMC Offset: 0x68) PMC Status Register --------
573 // -------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register --------
574
575 // *****************************************************************************
576 // SOFTWARE API DEFINITION FOR Reset Controller Interface
577 // *****************************************************************************
578 #ifndef __ASSEMBLY__
579 typedef struct _AT91S_RSTC {
580 AT91_REG RSTC_RCR; // Reset Control Register
581 AT91_REG RSTC_RSR; // Reset Status Register
582 AT91_REG RSTC_RMR; // Reset Mode Register
583 } AT91S_RSTC, *AT91PS_RSTC;
584 #else
585 #define RSTC_RCR (AT91_CAST(AT91_REG *) 0x00000000) // (RSTC_RCR) Reset Control Register
586 #define RSTC_RSR (AT91_CAST(AT91_REG *) 0x00000004) // (RSTC_RSR) Reset Status Register
587 #define RSTC_RMR (AT91_CAST(AT91_REG *) 0x00000008) // (RSTC_RMR) Reset Mode Register
588
589 #endif
590 // -------- RSTC_RCR : (RSTC Offset: 0x0) Reset Control Register --------
591 #define AT91C_RSTC_PROCRST (0x1 << 0) // (RSTC) Processor Reset
592 #define AT91C_RSTC_PERRST (0x1 << 2) // (RSTC) Peripheral Reset
593 #define AT91C_RSTC_EXTRST (0x1 << 3) // (RSTC) External Reset
594 #define AT91C_RSTC_KEY (0xFF << 24) // (RSTC) Password
595 // -------- RSTC_RSR : (RSTC Offset: 0x4) Reset Status Register --------
596 #define AT91C_RSTC_URSTS (0x1 << 0) // (RSTC) User Reset Status
597 #define AT91C_RSTC_BODSTS (0x1 << 1) // (RSTC) Brownout Detection Status
598 #define AT91C_RSTC_RSTTYP (0x7 << 8) // (RSTC) Reset Type
599 #define AT91C_RSTC_RSTTYP_POWERUP (0x0 << 8) // (RSTC) Power-up Reset. VDDCORE rising.
600 #define AT91C_RSTC_RSTTYP_WAKEUP (0x1 << 8) // (RSTC) WakeUp Reset. VDDCORE rising.
601 #define AT91C_RSTC_RSTTYP_WATCHDOG (0x2 << 8) // (RSTC) Watchdog Reset. Watchdog overflow occured.
602 #define AT91C_RSTC_RSTTYP_SOFTWARE (0x3 << 8) // (RSTC) Software Reset. Processor reset required by the software.
603 #define AT91C_RSTC_RSTTYP_USER (0x4 << 8) // (RSTC) User Reset. NRST pin detected low.
604 #define AT91C_RSTC_RSTTYP_BROWNOUT (0x5 << 8) // (RSTC) Brownout Reset occured.
605 #define AT91C_RSTC_NRSTL (0x1 << 16) // (RSTC) NRST pin level
606 #define AT91C_RSTC_SRCMP (0x1 << 17) // (RSTC) Software Reset Command in Progress.
607 // -------- RSTC_RMR : (RSTC Offset: 0x8) Reset Mode Register --------
608 #define AT91C_RSTC_URSTEN (0x1 << 0) // (RSTC) User Reset Enable
609 #define AT91C_RSTC_URSTIEN (0x1 << 4) // (RSTC) User Reset Interrupt Enable
610 #define AT91C_RSTC_ERSTL (0xF << 8) // (RSTC) User Reset Length
611 #define AT91C_RSTC_BODIEN (0x1 << 16) // (RSTC) Brownout Detection Interrupt Enable
612
613 // *****************************************************************************
614 // SOFTWARE API DEFINITION FOR Real Time Timer Controller Interface
615 // *****************************************************************************
616 #ifndef __ASSEMBLY__
617 typedef struct _AT91S_RTTC {
618 AT91_REG RTTC_RTMR; // Real-time Mode Register
619 AT91_REG RTTC_RTAR; // Real-time Alarm Register
620 AT91_REG RTTC_RTVR; // Real-time Value Register
621 AT91_REG RTTC_RTSR; // Real-time Status Register
622 } AT91S_RTTC, *AT91PS_RTTC;
623 #else
624 #define RTTC_RTMR (AT91_CAST(AT91_REG *) 0x00000000) // (RTTC_RTMR) Real-time Mode Register
625 #define RTTC_RTAR (AT91_CAST(AT91_REG *) 0x00000004) // (RTTC_RTAR) Real-time Alarm Register
626 #define RTTC_RTVR (AT91_CAST(AT91_REG *) 0x00000008) // (RTTC_RTVR) Real-time Value Register
627 #define RTTC_RTSR (AT91_CAST(AT91_REG *) 0x0000000C) // (RTTC_RTSR) Real-time Status Register
628
629 #endif
630 // -------- RTTC_RTMR : (RTTC Offset: 0x0) Real-time Mode Register --------
631 #define AT91C_RTTC_RTPRES (0xFFFF << 0) // (RTTC) Real-time Timer Prescaler Value
632 #define AT91C_RTTC_ALMIEN (0x1 << 16) // (RTTC) Alarm Interrupt Enable
633 #define AT91C_RTTC_RTTINCIEN (0x1 << 17) // (RTTC) Real Time Timer Increment Interrupt Enable
634 #define AT91C_RTTC_RTTRST (0x1 << 18) // (RTTC) Real Time Timer Restart
635 // -------- RTTC_RTAR : (RTTC Offset: 0x4) Real-time Alarm Register --------
636 #define AT91C_RTTC_ALMV (0x0 << 0) // (RTTC) Alarm Value
637 // -------- RTTC_RTVR : (RTTC Offset: 0x8) Current Real-time Value Register --------
638 #define AT91C_RTTC_CRTV (0x0 << 0) // (RTTC) Current Real-time Value
639 // -------- RTTC_RTSR : (RTTC Offset: 0xc) Real-time Status Register --------
640 #define AT91C_RTTC_ALMS (0x1 << 0) // (RTTC) Real-time Alarm Status
641 #define AT91C_RTTC_RTTINC (0x1 << 1) // (RTTC) Real-time Timer Increment
642
643 // *****************************************************************************
644 // SOFTWARE API DEFINITION FOR Periodic Interval Timer Controller Interface
645 // *****************************************************************************
646 #ifndef __ASSEMBLY__
647 typedef struct _AT91S_PITC {
648 AT91_REG PITC_PIMR; // Period Interval Mode Register
649 AT91_REG PITC_PISR; // Period Interval Status Register
650 AT91_REG PITC_PIVR; // Period Interval Value Register
651 AT91_REG PITC_PIIR; // Period Interval Image Register
652 } AT91S_PITC, *AT91PS_PITC;
653 #else
654 #define PITC_PIMR (AT91_CAST(AT91_REG *) 0x00000000) // (PITC_PIMR) Period Interval Mode Register
655 #define PITC_PISR (AT91_CAST(AT91_REG *) 0x00000004) // (PITC_PISR) Period Interval Status Register
656 #define PITC_PIVR (AT91_CAST(AT91_REG *) 0x00000008) // (PITC_PIVR) Period Interval Value Register
657 #define PITC_PIIR (AT91_CAST(AT91_REG *) 0x0000000C) // (PITC_PIIR) Period Interval Image Register
658
659 #endif
660 // -------- PITC_PIMR : (PITC Offset: 0x0) Periodic Interval Mode Register --------
661 #define AT91C_PITC_PIV (0xFFFFF << 0) // (PITC) Periodic Interval Value
662 #define AT91C_PITC_PITEN (0x1 << 24) // (PITC) Periodic Interval Timer Enabled
663 #define AT91C_PITC_PITIEN (0x1 << 25) // (PITC) Periodic Interval Timer Interrupt Enable
664 // -------- PITC_PISR : (PITC Offset: 0x4) Periodic Interval Status Register --------
665 #define AT91C_PITC_PITS (0x1 << 0) // (PITC) Periodic Interval Timer Status
666 // -------- PITC_PIVR : (PITC Offset: 0x8) Periodic Interval Value Register --------
667 #define AT91C_PITC_CPIV (0xFFFFF << 0) // (PITC) Current Periodic Interval Value
668 #define AT91C_PITC_PICNT (0xFFF << 20) // (PITC) Periodic Interval Counter
669 // -------- PITC_PIIR : (PITC Offset: 0xc) Periodic Interval Image Register --------
670
671 // *****************************************************************************
672 // SOFTWARE API DEFINITION FOR Watchdog Timer Controller Interface
673 // *****************************************************************************
674 #ifndef __ASSEMBLY__
675 typedef struct _AT91S_WDTC {
676 AT91_REG WDTC_WDCR; // Watchdog Control Register
677 AT91_REG WDTC_WDMR; // Watchdog Mode Register
678 AT91_REG WDTC_WDSR; // Watchdog Status Register
679 } AT91S_WDTC, *AT91PS_WDTC;
680 #else
681 #define WDTC_WDCR (AT91_CAST(AT91_REG *) 0x00000000) // (WDTC_WDCR) Watchdog Control Register
682 #define WDTC_WDMR (AT91_CAST(AT91_REG *) 0x00000004) // (WDTC_WDMR) Watchdog Mode Register
683 #define WDTC_WDSR (AT91_CAST(AT91_REG *) 0x00000008) // (WDTC_WDSR) Watchdog Status Register
684
685 #endif
686 // -------- WDTC_WDCR : (WDTC Offset: 0x0) Periodic Interval Image Register --------
687 #define AT91C_WDTC_WDRSTT (0x1 << 0) // (WDTC) Watchdog Restart
688 #define AT91C_WDTC_KEY (0xFF << 24) // (WDTC) Watchdog KEY Password
689 // -------- WDTC_WDMR : (WDTC Offset: 0x4) Watchdog Mode Register --------
690 #define AT91C_WDTC_WDV (0xFFF << 0) // (WDTC) Watchdog Timer Restart
691 #define AT91C_WDTC_WDFIEN (0x1 << 12) // (WDTC) Watchdog Fault Interrupt Enable
692 #define AT91C_WDTC_WDRSTEN (0x1 << 13) // (WDTC) Watchdog Reset Enable
693 #define AT91C_WDTC_WDRPROC (0x1 << 14) // (WDTC) Watchdog Timer Restart
694 #define AT91C_WDTC_WDDIS (0x1 << 15) // (WDTC) Watchdog Disable
695 #define AT91C_WDTC_WDD (0xFFF << 16) // (WDTC) Watchdog Delta Value
696 #define AT91C_WDTC_WDDBGHLT (0x1 << 28) // (WDTC) Watchdog Debug Halt
697 #define AT91C_WDTC_WDIDLEHLT (0x1 << 29) // (WDTC) Watchdog Idle Halt
698 // -------- WDTC_WDSR : (WDTC Offset: 0x8) Watchdog Status Register --------
699 #define AT91C_WDTC_WDUNF (0x1 << 0) // (WDTC) Watchdog Underflow
700 #define AT91C_WDTC_WDERR (0x1 << 1) // (WDTC) Watchdog Error
701
702 // *****************************************************************************
703 // SOFTWARE API DEFINITION FOR Voltage Regulator Mode Controller Interface
704 // *****************************************************************************
705 #ifndef __ASSEMBLY__
706 typedef struct _AT91S_VREG {
707 AT91_REG VREG_MR; // Voltage Regulator Mode Register
708 } AT91S_VREG, *AT91PS_VREG;
709 #else
710 #define VREG_MR (AT91_CAST(AT91_REG *) 0x00000000) // (VREG_MR) Voltage Regulator Mode Register
711
712 #endif
713 // -------- VREG_MR : (VREG Offset: 0x0) Voltage Regulator Mode Register --------
714 #define AT91C_VREG_PSTDBY (0x1 << 0) // (VREG) Voltage Regulator Power Standby Mode
715
716 // *****************************************************************************
717 // SOFTWARE API DEFINITION FOR Embedded Flash Controller Interface
718 // *****************************************************************************
719 #ifndef __ASSEMBLY__
720 typedef struct _AT91S_EFC {
721 AT91_REG EFC_FMR; // MC Flash Mode Register
722 AT91_REG EFC_FCR; // MC Flash Command Register
723 AT91_REG EFC_FSR; // MC Flash Status Register
724 AT91_REG EFC_VR; // MC Flash Version Register
725 } AT91S_EFC, *AT91PS_EFC;
726 #else
727 #define MC_FMR (AT91_CAST(AT91_REG *) 0x00000000) // (MC_FMR) MC Flash Mode Register
728 #define MC_FCR (AT91_CAST(AT91_REG *) 0x00000004) // (MC_FCR) MC Flash Command Register
729 #define MC_FSR (AT91_CAST(AT91_REG *) 0x00000008) // (MC_FSR) MC Flash Status Register
730 #define MC_VR (AT91_CAST(AT91_REG *) 0x0000000C) // (MC_VR) MC Flash Version Register
731
732 #endif
733 // -------- MC_FMR : (EFC Offset: 0x0) MC Flash Mode Register --------
734 #define AT91C_MC_FRDY (0x1 << 0) // (EFC) Flash Ready
735 #define AT91C_MC_LOCKE (0x1 << 2) // (EFC) Lock Error
736 #define AT91C_MC_PROGE (0x1 << 3) // (EFC) Programming Error
737 #define AT91C_MC_NEBP (0x1 << 7) // (EFC) No Erase Before Programming
738 #define AT91C_MC_FWS (0x3 << 8) // (EFC) Flash Wait State
739 #define AT91C_MC_FWS_0FWS (0x0 << 8) // (EFC) 1 cycle for Read, 2 for Write operations
740 #define AT91C_MC_FWS_1FWS (0x1 << 8) // (EFC) 2 cycles for Read, 3 for Write operations
741 #define AT91C_MC_FWS_2FWS (0x2 << 8) // (EFC) 3 cycles for Read, 4 for Write operations
742 #define AT91C_MC_FWS_3FWS (0x3 << 8) // (EFC) 4 cycles for Read, 4 for Write operations
743 #define AT91C_MC_FMCN (0xFF << 16) // (EFC) Flash Microsecond Cycle Number
744 // -------- MC_FCR : (EFC Offset: 0x4) MC Flash Command Register --------
745 #define AT91C_MC_FCMD (0xF << 0) // (EFC) Flash Command
746 #define AT91C_MC_FCMD_START_PROG (0x1) // (EFC) Starts the programming of th epage specified by PAGEN.
747 #define AT91C_MC_FCMD_LOCK (0x2) // (EFC) Starts a lock sequence of the sector defined by the bits 4 to 7 of the field PAGEN.
748 #define AT91C_MC_FCMD_PROG_AND_LOCK (0x3) // (EFC) The lock sequence automatically happens after the programming sequence is completed.
749 #define AT91C_MC_FCMD_UNLOCK (0x4) // (EFC) Starts an unlock sequence of the sector defined by the bits 4 to 7 of the field PAGEN.
750 #define AT91C_MC_FCMD_ERASE_ALL (0x8) // (EFC) Starts the erase of the entire flash.If at least a page is locked, the command is cancelled.
751 #define AT91C_MC_FCMD_SET_GP_NVM (0xB) // (EFC) Set General Purpose NVM bits.
752 #define AT91C_MC_FCMD_CLR_GP_NVM (0xD) // (EFC) Clear General Purpose NVM bits.
753 #define AT91C_MC_FCMD_SET_SECURITY (0xF) // (EFC) Set Security Bit.
754 #define AT91C_MC_PAGEN (0x3FF << 8) // (EFC) Page Number
755 #define AT91C_MC_KEY (0xFF << 24) // (EFC) Writing Protect Key
756 // -------- MC_FSR : (EFC Offset: 0x8) MC Flash Command Register --------
757 #define AT91C_MC_SECURITY (0x1 << 4) // (EFC) Security Bit Status
758 #define AT91C_MC_GPNVM0 (0x1 << 8) // (EFC) Sector 0 Lock Status
759 #define AT91C_MC_GPNVM1 (0x1 << 9) // (EFC) Sector 1 Lock Status
760 #define AT91C_MC_GPNVM2 (0x1 << 10) // (EFC) Sector 2 Lock Status
761 #define AT91C_MC_GPNVM3 (0x1 << 11) // (EFC) Sector 3 Lock Status
762 #define AT91C_MC_GPNVM4 (0x1 << 12) // (EFC) Sector 4 Lock Status
763 #define AT91C_MC_GPNVM5 (0x1 << 13) // (EFC) Sector 5 Lock Status
764 #define AT91C_MC_GPNVM6 (0x1 << 14) // (EFC) Sector 6 Lock Status
765 #define AT91C_MC_GPNVM7 (0x1 << 15) // (EFC) Sector 7 Lock Status
766 #define AT91C_MC_LOCKS0 (0x1 << 16) // (EFC) Sector 0 Lock Status
767 #define AT91C_MC_LOCKS1 (0x1 << 17) // (EFC) Sector 1 Lock Status
768 #define AT91C_MC_LOCKS2 (0x1 << 18) // (EFC) Sector 2 Lock Status
769 #define AT91C_MC_LOCKS3 (0x1 << 19) // (EFC) Sector 3 Lock Status
770 #define AT91C_MC_LOCKS4 (0x1 << 20) // (EFC) Sector 4 Lock Status
771 #define AT91C_MC_LOCKS5 (0x1 << 21) // (EFC) Sector 5 Lock Status
772 #define AT91C_MC_LOCKS6 (0x1 << 22) // (EFC) Sector 6 Lock Status
773 #define AT91C_MC_LOCKS7 (0x1 << 23) // (EFC) Sector 7 Lock Status
774 #define AT91C_MC_LOCKS8 (0x1 << 24) // (EFC) Sector 8 Lock Status
775 #define AT91C_MC_LOCKS9 (0x1 << 25) // (EFC) Sector 9 Lock Status
776 #define AT91C_MC_LOCKS10 (0x1 << 26) // (EFC) Sector 10 Lock Status
777 #define AT91C_MC_LOCKS11 (0x1 << 27) // (EFC) Sector 11 Lock Status
778 #define AT91C_MC_LOCKS12 (0x1 << 28) // (EFC) Sector 12 Lock Status
779 #define AT91C_MC_LOCKS13 (0x1 << 29) // (EFC) Sector 13 Lock Status
780 #define AT91C_MC_LOCKS14 (0x1 << 30) // (EFC) Sector 14 Lock Status
781 #define AT91C_MC_LOCKS15 (0x1 << 31) // (EFC) Sector 15 Lock Status
782 // -------- EFC_VR : (EFC Offset: 0xc) EFC version register --------
783 #define AT91C_EFC_VERSION (0xFFF << 0) // (EFC) EFC version number
784 #define AT91C_EFC_MFN (0x7 << 16) // (EFC) EFC MFN
785
786 // *****************************************************************************
787 // SOFTWARE API DEFINITION FOR Memory Controller Interface
788 // *****************************************************************************
789 #ifndef __ASSEMBLY__
790 typedef struct _AT91S_MC {
791 AT91_REG MC_RCR; // MC Remap Control Register
792 AT91_REG MC_ASR; // MC Abort Status Register
793 AT91_REG MC_AASR; // MC Abort Address Status Register
794 AT91_REG Reserved0[1]; //
795 AT91_REG MC_PUIA[16]; // MC Protection Unit Area
796 AT91_REG MC_PUP; // MC Protection Unit Peripherals
797 AT91_REG MC_PUER; // MC Protection Unit Enable Register
798 AT91_REG Reserved1[2]; //
799 AT91_REG MC0_FMR; // MC Flash Mode Register
800 AT91_REG MC0_FCR; // MC Flash Command Register
801 AT91_REG MC0_FSR; // MC Flash Status Register
802 AT91_REG MC0_VR; // MC Flash Version Register
803 AT91_REG MC1_FMR; // MC Flash Mode Register
804 AT91_REG MC1_FCR; // MC Flash Command Register
805 AT91_REG MC1_FSR; // MC Flash Status Register
806 AT91_REG MC1_VR; // MC Flash Version Register
807 } AT91S_MC, *AT91PS_MC;
808 #else
809 #define MC_RCR (AT91_CAST(AT91_REG *) 0x00000000) // (MC_RCR) MC Remap Control Register
810 #define MC_ASR (AT91_CAST(AT91_REG *) 0x00000004) // (MC_ASR) MC Abort Status Register
811 #define MC_AASR (AT91_CAST(AT91_REG *) 0x00000008) // (MC_AASR) MC Abort Address Status Register
812 #define MC_PUIA (AT91_CAST(AT91_REG *) 0x00000010) // (MC_PUIA) MC Protection Unit Area
813 #define MC_PUP (AT91_CAST(AT91_REG *) 0x00000050) // (MC_PUP) MC Protection Unit Peripherals
814 #define MC_PUER (AT91_CAST(AT91_REG *) 0x00000054) // (MC_PUER) MC Protection Unit Enable Register
815
816 #endif
817 // -------- MC_RCR : (MC Offset: 0x0) MC Remap Control Register --------
818 #define AT91C_MC_RCB (0x1 << 0) // (MC) Remap Command Bit
819 // -------- MC_ASR : (MC Offset: 0x4) MC Abort Status Register --------
820 #define AT91C_MC_UNDADD (0x1 << 0) // (MC) Undefined Addess Abort Status
821 #define AT91C_MC_MISADD (0x1 << 1) // (MC) Misaligned Addess Abort Status
822 #define AT91C_MC_MPU (0x1 << 2) // (MC) Memory protection Unit Abort Status
823 #define AT91C_MC_ABTSZ (0x3 << 8) // (MC) Abort Size Status
824 #define AT91C_MC_ABTSZ_BYTE (0x0 << 8) // (MC) Byte
825 #define AT91C_MC_ABTSZ_HWORD (0x1 << 8) // (MC) Half-word
826 #define AT91C_MC_ABTSZ_WORD (0x2 << 8) // (MC) Word
827 #define AT91C_MC_ABTTYP (0x3 << 10) // (MC) Abort Type Status
828 #define AT91C_MC_ABTTYP_DATAR (0x0 << 10) // (MC) Data Read
829 #define AT91C_MC_ABTTYP_DATAW (0x1 << 10) // (MC) Data Write
830 #define AT91C_MC_ABTTYP_FETCH (0x2 << 10) // (MC) Code Fetch
831 #define AT91C_MC_MST0 (0x1 << 16) // (MC) Master 0 Abort Source
832 #define AT91C_MC_MST1 (0x1 << 17) // (MC) Master 1 Abort Source
833 #define AT91C_MC_SVMST0 (0x1 << 24) // (MC) Saved Master 0 Abort Source
834 #define AT91C_MC_SVMST1 (0x1 << 25) // (MC) Saved Master 1 Abort Source
835 // -------- MC_PUIA : (MC Offset: 0x10) MC Protection Unit Area --------
836 #define AT91C_MC_PROT (0x3 << 0) // (MC) Protection
837 #define AT91C_MC_PROT_PNAUNA (0x0) // (MC) Privilege: No Access, User: No Access
838 #define AT91C_MC_PROT_PRWUNA (0x1) // (MC) Privilege: Read/Write, User: No Access
839 #define AT91C_MC_PROT_PRWURO (0x2) // (MC) Privilege: Read/Write, User: Read Only
840 #define AT91C_MC_PROT_PRWURW (0x3) // (MC) Privilege: Read/Write, User: Read/Write
841 #define AT91C_MC_SIZE (0xF << 4) // (MC) Internal Area Size
842 #define AT91C_MC_SIZE_1KB (0x0 << 4) // (MC) Area size 1KByte
843 #define AT91C_MC_SIZE_2KB (0x1 << 4) // (MC) Area size 2KByte
844 #define AT91C_MC_SIZE_4KB (0x2 << 4) // (MC) Area size 4KByte
845 #define AT91C_MC_SIZE_8KB (0x3 << 4) // (MC) Area size 8KByte
846 #define AT91C_MC_SIZE_16KB (0x4 << 4) // (MC) Area size 16KByte
847 #define AT91C_MC_SIZE_32KB (0x5 << 4) // (MC) Area size 32KByte
848 #define AT91C_MC_SIZE_64KB (0x6 << 4) // (MC) Area size 64KByte
849 #define AT91C_MC_SIZE_128KB (0x7 << 4) // (MC) Area size 128KByte
850 #define AT91C_MC_SIZE_256KB (0x8 << 4) // (MC) Area size 256KByte
851 #define AT91C_MC_SIZE_512KB (0x9 << 4) // (MC) Area size 512KByte
852 #define AT91C_MC_SIZE_1MB (0xA << 4) // (MC) Area size 1MByte
853 #define AT91C_MC_SIZE_2MB (0xB << 4) // (MC) Area size 2MByte
854 #define AT91C_MC_SIZE_4MB (0xC << 4) // (MC) Area size 4MByte
855 #define AT91C_MC_SIZE_8MB (0xD << 4) // (MC) Area size 8MByte
856 #define AT91C_MC_SIZE_16MB (0xE << 4) // (MC) Area size 16MByte
857 #define AT91C_MC_SIZE_64MB (0xF << 4) // (MC) Area size 64MByte
858 #define AT91C_MC_BA (0x3FFFF << 10) // (MC) Internal Area Base Address
859 // -------- MC_PUP : (MC Offset: 0x50) MC Protection Unit Peripheral --------
860 // -------- MC_PUER : (MC Offset: 0x54) MC Protection Unit Area --------
861 #define AT91C_MC_PUEB (0x1 << 0) // (MC) Protection Unit enable Bit
862
863 // *****************************************************************************
864 // SOFTWARE API DEFINITION FOR Serial Parallel Interface
865 // *****************************************************************************
866 #ifndef __ASSEMBLY__
867 typedef struct _AT91S_SPI {
868 AT91_REG SPI_CR; // Control Register
869 AT91_REG SPI_MR; // Mode Register
870 AT91_REG SPI_RDR; // Receive Data Register
871 AT91_REG SPI_TDR; // Transmit Data Register
872 AT91_REG SPI_SR; // Status Register
873 AT91_REG SPI_IER; // Interrupt Enable Register
874 AT91_REG SPI_IDR; // Interrupt Disable Register
875 AT91_REG SPI_IMR; // Interrupt Mask Register
876 AT91_REG Reserved0[4]; //
877 AT91_REG SPI_CSR[4]; // Chip Select Register
878 AT91_REG Reserved1[48]; //
879 AT91_REG SPI_RPR; // Receive Pointer Register
880 AT91_REG SPI_RCR; // Receive Counter Register
881 AT91_REG SPI_TPR; // Transmit Pointer Register
882 AT91_REG SPI_TCR; // Transmit Counter Register
883 AT91_REG SPI_RNPR; // Receive Next Pointer Register
884 AT91_REG SPI_RNCR; // Receive Next Counter Register
885 AT91_REG SPI_TNPR; // Transmit Next Pointer Register
886 AT91_REG SPI_TNCR; // Transmit Next Counter Register
887 AT91_REG SPI_PTCR; // PDC Transfer Control Register
888 AT91_REG SPI_PTSR; // PDC Transfer Status Register
889 } AT91S_SPI, *AT91PS_SPI;
890 #else
891 #define SPI_CR (AT91_CAST(AT91_REG *) 0x00000000) // (SPI_CR) Control Register
892 #define SPI_MR (AT91_CAST(AT91_REG *) 0x00000004) // (SPI_MR) Mode Register
893 #define SPI_RDR (AT91_CAST(AT91_REG *) 0x00000008) // (SPI_RDR) Receive Data Register
894 #define SPI_TDR (AT91_CAST(AT91_REG *) 0x0000000C) // (SPI_TDR) Transmit Data Register
895 #define SPI_SR (AT91_CAST(AT91_REG *) 0x00000010) // (SPI_SR) Status Register
896 #define SPI_IER (AT91_CAST(AT91_REG *) 0x00000014) // (SPI_IER) Interrupt Enable Register
897 #define SPI_IDR (AT91_CAST(AT91_REG *) 0x00000018) // (SPI_IDR) Interrupt Disable Register
898 #define SPI_IMR (AT91_CAST(AT91_REG *) 0x0000001C) // (SPI_IMR) Interrupt Mask Register
899 #define SPI_CSR (AT91_CAST(AT91_REG *) 0x00000030) // (SPI_CSR) Chip Select Register
900
901 #endif
902 // -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register --------
903 #define AT91C_SPI_SPIEN (0x1 << 0) // (SPI) SPI Enable
904 #define AT91C_SPI_SPIDIS (0x1 << 1) // (SPI) SPI Disable
905 #define AT91C_SPI_SWRST (0x1 << 7) // (SPI) SPI Software reset
906 #define AT91C_SPI_LASTXFER (0x1 << 24) // (SPI) SPI Last Transfer
907 // -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register --------
908 #define AT91C_SPI_MSTR (0x1 << 0) // (SPI) Master/Slave Mode
909 #define AT91C_SPI_PS (0x1 << 1) // (SPI) Peripheral Select
910 #define AT91C_SPI_PS_FIXED (0x0 << 1) // (SPI) Fixed Peripheral Select
911 #define AT91C_SPI_PS_VARIABLE (0x1 << 1) // (SPI) Variable Peripheral Select
912 #define AT91C_SPI_PCSDEC (0x1 << 2) // (SPI) Chip Select Decode
913 #define AT91C_SPI_FDIV (0x1 << 3) // (SPI) Clock Selection
914 #define AT91C_SPI_MODFDIS (0x1 << 4) // (SPI) Mode Fault Detection
915 #define AT91C_SPI_LLB (0x1 << 7) // (SPI) Clock Selection
916 #define AT91C_SPI_PCS (0xF << 16) // (SPI) Peripheral Chip Select
917 #define AT91C_SPI_DLYBCS (0xFF << 24) // (SPI) Delay Between Chip Selects
918 // -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register --------
919 #define AT91C_SPI_RD (0xFFFF << 0) // (SPI) Receive Data
920 #define AT91C_SPI_RPCS (0xF << 16) // (SPI) Peripheral Chip Select Status
921 // -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register --------
922 #define AT91C_SPI_TD (0xFFFF << 0) // (SPI) Transmit Data
923 #define AT91C_SPI_TPCS (0xF << 16) // (SPI) Peripheral Chip Select Status
924 // -------- SPI_SR : (SPI Offset: 0x10) Status Register --------
925 #define AT91C_SPI_RDRF (0x1 << 0) // (SPI) Receive Data Register Full
926 #define AT91C_SPI_TDRE (0x1 << 1) // (SPI) Transmit Data Register Empty
927 #define AT91C_SPI_MODF (0x1 << 2) // (SPI) Mode Fault Error
928 #define AT91C_SPI_OVRES (0x1 << 3) // (SPI) Overrun Error Status
929 #define AT91C_SPI_ENDRX (0x1 << 4) // (SPI) End of Receiver Transfer
930 #define AT91C_SPI_ENDTX (0x1 << 5) // (SPI) End of Receiver Transfer
931 #define AT91C_SPI_RXBUFF (0x1 << 6) // (SPI) RXBUFF Interrupt
932 #define AT91C_SPI_TXBUFE (0x1 << 7) // (SPI) TXBUFE Interrupt
933 #define AT91C_SPI_NSSR (0x1 << 8) // (SPI) NSSR Interrupt
934 #define AT91C_SPI_TXEMPTY (0x1 << 9) // (SPI) TXEMPTY Interrupt
935 #define AT91C_SPI_SPIENS (0x1 << 16) // (SPI) Enable Status
936 // -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register --------
937 // -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register --------
938 // -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register --------
939 // -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register --------
940 #define AT91C_SPI_CPOL (0x1 << 0) // (SPI) Clock Polarity
941 #define AT91C_SPI_NCPHA (0x1 << 1) // (SPI) Clock Phase
942 #define AT91C_SPI_CSAAT (0x1 << 3) // (SPI) Chip Select Active After Transfer
943 #define AT91C_SPI_BITS (0xF << 4) // (SPI) Bits Per Transfer
944 #define AT91C_SPI_BITS_8 (0x0 << 4) // (SPI) 8 Bits Per transfer
945 #define AT91C_SPI_BITS_9 (0x1 << 4) // (SPI) 9 Bits Per transfer
946 #define AT91C_SPI_BITS_10 (0x2 << 4) // (SPI) 10 Bits Per transfer
947 #define AT91C_SPI_BITS_11 (0x3 << 4) // (SPI) 11 Bits Per transfer
948 #define AT91C_SPI_BITS_12 (0x4 << 4) // (SPI) 12 Bits Per transfer
949 #define AT91C_SPI_BITS_13 (0x5 << 4) // (SPI) 13 Bits Per transfer
950 #define AT91C_SPI_BITS_14 (0x6 << 4) // (SPI) 14 Bits Per transfer
951 #define AT91C_SPI_BITS_15 (0x7 << 4) // (SPI) 15 Bits Per transfer
952 #define AT91C_SPI_BITS_16 (0x8 << 4) // (SPI) 16 Bits Per transfer
953 #define AT91C_SPI_SCBR (0xFF << 8) // (SPI) Serial Clock Baud Rate
954 #define AT91C_SPI_DLYBS (0xFF << 16) // (SPI) Delay Before SPCK
955 #define AT91C_SPI_DLYBCT (0xFF << 24) // (SPI) Delay Between Consecutive Transfers
956
957 // *****************************************************************************
958 // SOFTWARE API DEFINITION FOR Analog to Digital Convertor
959 // *****************************************************************************
960 #ifndef __ASSEMBLY__
961 typedef struct _AT91S_ADC {
962 AT91_REG ADC_CR; // ADC Control Register
963 AT91_REG ADC_MR; // ADC Mode Register
964 AT91_REG Reserved0[2]; //
965 AT91_REG ADC_CHER; // ADC Channel Enable Register
966 AT91_REG ADC_CHDR; // ADC Channel Disable Register
967 AT91_REG ADC_CHSR; // ADC Channel Status Register
968 AT91_REG ADC_SR; // ADC Status Register
969 AT91_REG ADC_LCDR; // ADC Last Converted Data Register
970 AT91_REG ADC_IER; // ADC Interrupt Enable Register
971 AT91_REG ADC_IDR; // ADC Interrupt Disable Register
972 AT91_REG ADC_IMR; // ADC Interrupt Mask Register
973 AT91_REG ADC_CDR[8]; // ADC Channel Data Register
974 AT91_REG Reserved1[44]; //
975 AT91_REG ADC_RPR; // Receive Pointer Register
976 AT91_REG ADC_RCR; // Receive Counter Register
977 AT91_REG ADC_TPR; // Transmit Pointer Register
978 AT91_REG ADC_TCR; // Transmit Counter Register
979 AT91_REG ADC_RNPR; // Receive Next Pointer Register
980 AT91_REG ADC_RNCR; // Receive Next Counter Register
981 AT91_REG ADC_TNPR; // Transmit Next Pointer Register
982 AT91_REG ADC_TNCR; // Transmit Next Counter Register
983 AT91_REG ADC_PTCR; // PDC Transfer Control Register
984 AT91_REG ADC_PTSR; // PDC Transfer Status Register
985 } AT91S_ADC, *AT91PS_ADC;
986 #else
987 #define ADC_CR (AT91_CAST(AT91_REG *) 0x00000000) // (ADC_CR) ADC Control Register
988 #define ADC_MR (AT91_CAST(AT91_REG *) 0x00000004) // (ADC_MR) ADC Mode Register
989 #define ADC_CHER (AT91_CAST(AT91_REG *) 0x00000010) // (ADC_CHER) ADC Channel Enable Register
990 #define ADC_CHDR (AT91_CAST(AT91_REG *) 0x00000014) // (ADC_CHDR) ADC Channel Disable Register
991 #define ADC_CHSR (AT91_CAST(AT91_REG *) 0x00000018) // (ADC_CHSR) ADC Channel Status Register
992 #define ADC_SR (AT91_CAST(AT91_REG *) 0x0000001C) // (ADC_SR) ADC Status Register
993 #define ADC_LCDR (AT91_CAST(AT91_REG *) 0x00000020) // (ADC_LCDR) ADC Last Converted Data Register
994 #define ADC_IER (AT91_CAST(AT91_REG *) 0x00000024) // (ADC_IER) ADC Interrupt Enable Register
995 #define ADC_IDR (AT91_CAST(AT91_REG *) 0x00000028) // (ADC_IDR) ADC Interrupt Disable Register
996 #define ADC_IMR (AT91_CAST(AT91_REG *) 0x0000002C) // (ADC_IMR) ADC Interrupt Mask Register
997 #define ADC_CDR0 (AT91_CAST(AT91_REG *) 0x00000030) // (ADC_CDR0) ADC Channel Data Register 0
998 #define ADC_CDR1 (AT91_CAST(AT91_REG *) 0x00000034) // (ADC_CDR1) ADC Channel Data Register 1
999 #define ADC_CDR2 (AT91_CAST(AT91_REG *) 0x00000038) // (ADC_CDR2) ADC Channel Data Register 2
1000 #define ADC_CDR3 (AT91_CAST(AT91_REG *) 0x0000003C) // (ADC_CDR3) ADC Channel Data Register 3
1001 #define ADC_CDR4 (AT91_CAST(AT91_REG *) 0x00000040) // (ADC_CDR4) ADC Channel Data Register 4
1002 #define ADC_CDR5 (AT91_CAST(AT91_REG *) 0x00000044) // (ADC_CDR5) ADC Channel Data Register 5
1003 #define ADC_CDR6 (AT91_CAST(AT91_REG *) 0x00000048) // (ADC_CDR6) ADC Channel Data Register 6
1004 #define ADC_CDR7 (AT91_CAST(AT91_REG *) 0x0000004C) // (ADC_CDR7) ADC Channel Data Register 7
1005
1006 #endif
1007 // -------- ADC_CR : (ADC Offset: 0x0) ADC Control Register --------
1008 #define AT91C_ADC_SWRST (0x1 << 0) // (ADC) Software Reset
1009 #define AT91C_ADC_START (0x1 << 1) // (ADC) Start Conversion
1010 // -------- ADC_MR : (ADC Offset: 0x4) ADC Mode Register --------
1011 #define AT91C_ADC_TRGEN (0x1 << 0) // (ADC) Trigger Enable
1012 #define AT91C_ADC_TRGEN_DIS (0x0) // (ADC) Hradware triggers are disabled. Starting a conversion is only possible by software
1013 #define AT91C_ADC_TRGEN_EN (0x1) // (ADC) Hardware trigger selected by TRGSEL field is enabled.
1014 #define AT91C_ADC_TRGSEL (0x7 << 1) // (ADC) Trigger Selection
1015 #define AT91C_ADC_TRGSEL_TIOA0 (0x0 << 1) // (ADC) Selected TRGSEL = TIAO0
1016 #define AT91C_ADC_TRGSEL_TIOA1 (0x1 << 1) // (ADC) Selected TRGSEL = TIAO1
1017 #define AT91C_ADC_TRGSEL_TIOA2 (0x2 << 1) // (ADC) Selected TRGSEL = TIAO2
1018 #define AT91C_ADC_TRGSEL_TIOA3 (0x3 << 1) // (ADC) Selected TRGSEL = TIAO3
1019 #define AT91C_ADC_TRGSEL_TIOA4 (0x4 << 1) // (ADC) Selected TRGSEL = TIAO4
1020 #define AT91C_ADC_TRGSEL_TIOA5 (0x5 << 1) // (ADC) Selected TRGSEL = TIAO5
1021 #define AT91C_ADC_TRGSEL_EXT (0x6 << 1) // (ADC) Selected TRGSEL = External Trigger
1022 #define AT91C_ADC_LOWRES (0x1 << 4) // (ADC) Resolution.
1023 #define AT91C_ADC_LOWRES_10_BIT (0x0 << 4) // (ADC) 10-bit resolution
1024 #define AT91C_ADC_LOWRES_8_BIT (0x1 << 4) // (ADC) 8-bit resolution
1025 #define AT91C_ADC_SLEEP (0x1 << 5) // (ADC) Sleep Mode
1026 #define AT91C_ADC_SLEEP_NORMAL_MODE (0x0 << 5) // (ADC) Normal Mode
1027 #define AT91C_ADC_SLEEP_MODE (0x1 << 5) // (ADC) Sleep Mode
1028 #define AT91C_ADC_PRESCAL (0x3F << 8) // (ADC) Prescaler rate selection
1029 #define AT91C_ADC_STARTUP (0x1F << 16) // (ADC) Startup Time
1030 #define AT91C_ADC_SHTIM (0xF << 24) // (ADC) Sample & Hold Time
1031 // -------- ADC_CHER : (ADC Offset: 0x10) ADC Channel Enable Register --------
1032 #define AT91C_ADC_CH0 (0x1 << 0) // (ADC) Channel 0
1033 #define AT91C_ADC_CH1 (0x1 << 1) // (ADC) Channel 1
1034 #define AT91C_ADC_CH2 (0x1 << 2) // (ADC) Channel 2
1035 #define AT91C_ADC_CH3 (0x1 << 3) // (ADC) Channel 3
1036 #define AT91C_ADC_CH4 (0x1 << 4) // (ADC) Channel 4
1037 #define AT91C_ADC_CH5 (0x1 << 5) // (ADC) Channel 5
1038 #define AT91C_ADC_CH6 (0x1 << 6) // (ADC) Channel 6
1039 #define AT91C_ADC_CH7 (0x1 << 7) // (ADC) Channel 7
1040 // -------- ADC_CHDR : (ADC Offset: 0x14) ADC Channel Disable Register --------
1041 // -------- ADC_CHSR : (ADC Offset: 0x18) ADC Channel Status Register --------
1042 // -------- ADC_SR : (ADC Offset: 0x1c) ADC Status Register --------
1043 #define AT91C_ADC_EOC0 (0x1 << 0) // (ADC) End of Conversion
1044 #define AT91C_ADC_EOC1 (0x1 << 1) // (ADC) End of Conversion
1045 #define AT91C_ADC_EOC2 (0x1 << 2) // (ADC) End of Conversion
1046 #define AT91C_ADC_EOC3 (0x1 << 3) // (ADC) End of Conversion
1047 #define AT91C_ADC_EOC4 (0x1 << 4) // (ADC) End of Conversion
1048 #define AT91C_ADC_EOC5 (0x1 << 5) // (ADC) End of Conversion
1049 #define AT91C_ADC_EOC6 (0x1 << 6) // (ADC) End of Conversion
1050 #define AT91C_ADC_EOC7 (0x1 << 7) // (ADC) End of Conversion
1051 #define AT91C_ADC_OVRE0 (0x1 << 8) // (ADC) Overrun Error
1052 #define AT91C_ADC_OVRE1 (0x1 << 9) // (ADC) Overrun Error
1053 #define AT91C_ADC_OVRE2 (0x1 << 10) // (ADC) Overrun Error
1054 #define AT91C_ADC_OVRE3 (0x1 << 11) // (ADC) Overrun Error
1055 #define AT91C_ADC_OVRE4 (0x1 << 12) // (ADC) Overrun Error
1056 #define AT91C_ADC_OVRE5 (0x1 << 13) // (ADC) Overrun Error
1057 #define AT91C_ADC_OVRE6 (0x1 << 14) // (ADC) Overrun Error
1058 #define AT91C_ADC_OVRE7 (0x1 << 15) // (ADC) Overrun Error
1059 #define AT91C_ADC_DRDY (0x1 << 16) // (ADC) Data Ready
1060 #define AT91C_ADC_GOVRE (0x1 << 17) // (ADC) General Overrun
1061 #define AT91C_ADC_ENDRX (0x1 << 18) // (ADC) End of Receiver Transfer
1062 #define AT91C_ADC_RXBUFF (0x1 << 19) // (ADC) RXBUFF Interrupt
1063 // -------- ADC_LCDR : (ADC Offset: 0x20) ADC Last Converted Data Register --------
1064 #define AT91C_ADC_LDATA (0x3FF << 0) // (ADC) Last Data Converted
1065 // -------- ADC_IER : (ADC Offset: 0x24) ADC Interrupt Enable Register --------
1066 // -------- ADC_IDR : (ADC Offset: 0x28) ADC Interrupt Disable Register --------
1067 // -------- ADC_IMR : (ADC Offset: 0x2c) ADC Interrupt Mask Register --------
1068 // -------- ADC_CDR0 : (ADC Offset: 0x30) ADC Channel Data Register 0 --------
1069 #define AT91C_ADC_DATA (0x3FF << 0) // (ADC) Converted Data
1070 // -------- ADC_CDR1 : (ADC Offset: 0x34) ADC Channel Data Register 1 --------
1071 // -------- ADC_CDR2 : (ADC Offset: 0x38) ADC Channel Data Register 2 --------
1072 // -------- ADC_CDR3 : (ADC Offset: 0x3c) ADC Channel Data Register 3 --------
1073 // -------- ADC_CDR4 : (ADC Offset: 0x40) ADC Channel Data Register 4 --------
1074 // -------- ADC_CDR5 : (ADC Offset: 0x44) ADC Channel Data Register 5 --------
1075 // -------- ADC_CDR6 : (ADC Offset: 0x48) ADC Channel Data Register 6 --------
1076 // -------- ADC_CDR7 : (ADC Offset: 0x4c) ADC Channel Data Register 7 --------
1077
1078 // *****************************************************************************
1079 // SOFTWARE API DEFINITION FOR Synchronous Serial Controller Interface
1080 // *****************************************************************************
1081 #ifndef __ASSEMBLY__
1082 typedef struct _AT91S_SSC {
1083 AT91_REG SSC_CR; // Control Register
1084 AT91_REG SSC_CMR; // Clock Mode Register
1085 AT91_REG Reserved0[2]; //
1086 AT91_REG SSC_RCMR; // Receive Clock ModeRegister
1087 AT91_REG SSC_RFMR; // Receive Frame Mode Register
1088 AT91_REG SSC_TCMR; // Transmit Clock Mode Register
1089 AT91_REG SSC_TFMR; // Transmit Frame Mode Register
1090 AT91_REG SSC_RHR; // Receive Holding Register
1091 AT91_REG SSC_THR; // Transmit Holding Register
1092 AT91_REG Reserved1[2]; //
1093 AT91_REG SSC_RSHR; // Receive Sync Holding Register
1094 AT91_REG SSC_TSHR; // Transmit Sync Holding Register
1095 AT91_REG Reserved2[2]; //
1096 AT91_REG SSC_SR; // Status Register
1097 AT91_REG SSC_IER; // Interrupt Enable Register
1098 AT91_REG SSC_IDR; // Interrupt Disable Register
1099 AT91_REG SSC_IMR; // Interrupt Mask Register
1100 AT91_REG Reserved3[44]; //
1101 AT91_REG SSC_RPR; // Receive Pointer Register
1102 AT91_REG SSC_RCR; // Receive Counter Register
1103 AT91_REG SSC_TPR; // Transmit Pointer Register
1104 AT91_REG SSC_TCR; // Transmit Counter Register
1105 AT91_REG SSC_RNPR; // Receive Next Pointer Register
1106 AT91_REG SSC_RNCR; // Receive Next Counter Register
1107 AT91_REG SSC_TNPR; // Transmit Next Pointer Register
1108 AT91_REG SSC_TNCR; // Transmit Next Counter Register
1109 AT91_REG SSC_PTCR; // PDC Transfer Control Register
1110 AT91_REG SSC_PTSR; // PDC Transfer Status Register
1111 } AT91S_SSC, *AT91PS_SSC;
1112 #else
1113 #define SSC_CR (AT91_CAST(AT91_REG *) 0x00000000) // (SSC_CR) Control Register
1114 #define SSC_CMR (AT91_CAST(AT91_REG *) 0x00000004) // (SSC_CMR) Clock Mode Register
1115 #define SSC_RCMR (AT91_CAST(AT91_REG *) 0x00000010) // (SSC_RCMR) Receive Clock ModeRegister
1116 #define SSC_RFMR (AT91_CAST(AT91_REG *) 0x00000014) // (SSC_RFMR) Receive Frame Mode Register
1117 #define SSC_TCMR (AT91_CAST(AT91_REG *) 0x00000018) // (SSC_TCMR) Transmit Clock Mode Register
1118 #define SSC_TFMR (AT91_CAST(AT91_REG *) 0x0000001C) // (SSC_TFMR) Transmit Frame Mode Register
1119 #define SSC_RHR (AT91_CAST(AT91_REG *) 0x00000020) // (SSC_RHR) Receive Holding Register
1120 #define SSC_THR (AT91_CAST(AT91_REG *) 0x00000024) // (SSC_THR) Transmit Holding Register
1121 #define SSC_RSHR (AT91_CAST(AT91_REG *) 0x00000030) // (SSC_RSHR) Receive Sync Holding Register
1122 #define SSC_TSHR (AT91_CAST(AT91_REG *) 0x00000034) // (SSC_TSHR) Transmit Sync Holding Register
1123 #define SSC_SR (AT91_CAST(AT91_REG *) 0x00000040) // (SSC_SR) Status Register
1124 #define SSC_IER (AT91_CAST(AT91_REG *) 0x00000044) // (SSC_IER) Interrupt Enable Register
1125 #define SSC_IDR (AT91_CAST(AT91_REG *) 0x00000048) // (SSC_IDR) Interrupt Disable Register
1126 #define SSC_IMR (AT91_CAST(AT91_REG *) 0x0000004C) // (SSC_IMR) Interrupt Mask Register
1127
1128 #endif
1129 // -------- SSC_CR : (SSC Offset: 0x0) SSC Control Register --------
1130 #define AT91C_SSC_RXEN (0x1 << 0) // (SSC) Receive Enable
1131 #define AT91C_SSC_RXDIS (0x1 << 1) // (SSC) Receive Disable
1132 #define AT91C_SSC_TXEN (0x1 << 8) // (SSC) Transmit Enable
1133 #define AT91C_SSC_TXDIS (0x1 << 9) // (SSC) Transmit Disable
1134 #define AT91C_SSC_SWRST (0x1 << 15) // (SSC) Software Reset
1135 // -------- SSC_RCMR : (SSC Offset: 0x10) SSC Receive Clock Mode Register --------
1136 #define AT91C_SSC_CKS (0x3 << 0) // (SSC) Receive/Transmit Clock Selection
1137 #define AT91C_SSC_CKS_DIV (0x0) // (SSC) Divided Clock
1138 #define AT91C_SSC_CKS_TK (0x1) // (SSC) TK Clock signal
1139 #define AT91C_SSC_CKS_RK (0x2) // (SSC) RK pin
1140 #define AT91C_SSC_CKO (0x7 << 2) // (SSC) Receive/Transmit Clock Output Mode Selection
1141 #define AT91C_SSC_CKO_NONE (0x0 << 2) // (SSC) Receive/Transmit Clock Output Mode: None RK pin: Input-only
1142 #define AT91C_SSC_CKO_CONTINOUS (0x1 << 2) // (SSC) Continuous Receive/Transmit Clock RK pin: Output
1143 #define AT91C_SSC_CKO_DATA_TX (0x2 << 2) // (SSC) Receive/Transmit Clock only during data transfers RK pin: Output
1144 #define AT91C_SSC_CKI (0x1 << 5) // (SSC) Receive/Transmit Clock Inversion
1145 #define AT91C_SSC_START (0xF << 8) // (SSC) Receive/Transmit Start Selection
1146 #define AT91C_SSC_START_CONTINOUS (0x0 << 8) // (SSC) Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data.
1147 #define AT91C_SSC_START_TX (0x1 << 8) // (SSC) Transmit/Receive start
1148 #define AT91C_SSC_START_LOW_RF (0x2 << 8) // (SSC) Detection of a low level on RF input
1149 #define AT91C_SSC_START_HIGH_RF (0x3 << 8) // (SSC) Detection of a high level on RF input
1150 #define AT91C_SSC_START_FALL_RF (0x4 << 8) // (SSC) Detection of a falling edge on RF input
1151 #define AT91C_SSC_START_RISE_RF (0x5 << 8) // (SSC) Detection of a rising edge on RF input
1152 #define AT91C_SSC_START_LEVEL_RF (0x6 << 8) // (SSC) Detection of any level change on RF input
1153 #define AT91C_SSC_START_EDGE_RF (0x7 << 8) // (SSC) Detection of any edge on RF input
1154 #define AT91C_SSC_START_0 (0x8 << 8) // (SSC) Compare 0
1155 #define AT91C_SSC_STTDLY (0xFF << 16) // (SSC) Receive/Transmit Start Delay
1156 #define AT91C_SSC_PERIOD (0xFF << 24) // (SSC) Receive/Transmit Period Divider Selection
1157 // -------- SSC_RFMR : (SSC Offset: 0x14) SSC Receive Frame Mode Register --------
1158 #define AT91C_SSC_DATLEN (0x1F << 0) // (SSC) Data Length
1159 #define AT91C_SSC_LOOP (0x1 << 5) // (SSC) Loop Mode
1160 #define AT91C_SSC_MSBF (0x1 << 7) // (SSC) Most Significant Bit First
1161 #define AT91C_SSC_DATNB (0xF << 8) // (SSC) Data Number per Frame
1162 #define AT91C_SSC_FSLEN (0xF << 16) // (SSC) Receive/Transmit Frame Sync length
1163 #define AT91C_SSC_FSOS (0x7 << 20) // (SSC) Receive/Transmit Frame Sync Output Selection
1164 #define AT91C_SSC_FSOS_NONE (0x0 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: None RK pin Input-only
1165 #define AT91C_SSC_FSOS_NEGATIVE (0x1 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Negative Pulse
1166 #define AT91C_SSC_FSOS_POSITIVE (0x2 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Positive Pulse
1167 #define AT91C_SSC_FSOS_LOW (0x3 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver Low during data transfer
1168 #define AT91C_SSC_FSOS_HIGH (0x4 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver High during data transfer
1169 #define AT91C_SSC_FSOS_TOGGLE (0x5 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Toggling at each start of data transfer
1170 #define AT91C_SSC_FSEDGE (0x1 << 24) // (SSC) Frame Sync Edge Detection
1171 // -------- SSC_TCMR : (SSC Offset: 0x18) SSC Transmit Clock Mode Register --------
1172 // -------- SSC_TFMR : (SSC Offset: 0x1c) SSC Transmit Frame Mode Register --------
1173 #define AT91C_SSC_DATDEF (0x1 << 5) // (SSC) Data Default Value
1174 #define AT91C_SSC_FSDEN (0x1 << 23) // (SSC) Frame Sync Data Enable
1175 // -------- SSC_SR : (SSC Offset: 0x40) SSC Status Register --------
1176 #define AT91C_SSC_TXRDY (0x1 << 0) // (SSC) Transmit Ready
1177 #define AT91C_SSC_TXEMPTY (0x1 << 1) // (SSC) Transmit Empty
1178 #define AT91C_SSC_ENDTX (0x1 << 2) // (SSC) End Of Transmission
1179 #define AT91C_SSC_TXBUFE (0x1 << 3) // (SSC) Transmit Buffer Empty
1180 #define AT91C_SSC_RXRDY (0x1 << 4) // (SSC) Receive Ready
1181 #define AT91C_SSC_OVRUN (0x1 << 5) // (SSC) Receive Overrun
1182 #define AT91C_SSC_ENDRX (0x1 << 6) // (SSC) End of Reception
1183 #define AT91C_SSC_RXBUFF (0x1 << 7) // (SSC) Receive Buffer Full
1184 #define AT91C_SSC_TXSYN (0x1 << 10) // (SSC) Transmit Sync
1185 #define AT91C_SSC_RXSYN (0x1 << 11) // (SSC) Receive Sync
1186 #define AT91C_SSC_TXENA (0x1 << 16) // (SSC) Transmit Enable
1187 #define AT91C_SSC_RXENA (0x1 << 17) // (SSC) Receive Enable
1188 // -------- SSC_IER : (SSC Offset: 0x44) SSC Interrupt Enable Register --------
1189 // -------- SSC_IDR : (SSC Offset: 0x48) SSC Interrupt Disable Register --------
1190 // -------- SSC_IMR : (SSC Offset: 0x4c) SSC Interrupt Mask Register --------
1191
1192 // *****************************************************************************
1193 // SOFTWARE API DEFINITION FOR Usart
1194 // *****************************************************************************
1195 #ifndef __ASSEMBLY__
1196 typedef struct _AT91S_USART {
1197 AT91_REG US_CR; // Control Register
1198 AT91_REG US_MR; // Mode Register
1199 AT91_REG US_IER; // Interrupt Enable Register
1200 AT91_REG US_IDR; // Interrupt Disable Register
1201 AT91_REG US_IMR; // Interrupt Mask Register
1202 AT91_REG US_CSR; // Channel Status Register
1203 AT91_REG US_RHR; // Receiver Holding Register
1204 AT91_REG US_THR; // Transmitter Holding Register
1205 AT91_REG US_BRGR; // Baud Rate Generator Register
1206 AT91_REG US_RTOR; // Receiver Time-out Register
1207 AT91_REG US_TTGR; // Transmitter Time-guard Register
1208 AT91_REG Reserved0[5]; //
1209 AT91_REG US_FIDI; // FI_DI_Ratio Register
1210 AT91_REG US_NER; // Nb Errors Register
1211 AT91_REG Reserved1[1]; //
1212 AT91_REG US_IF; // IRDA_FILTER Register
1213 AT91_REG Reserved2[44]; //
1214 AT91_REG US_RPR; // Receive Pointer Register
1215 AT91_REG US_RCR; // Receive Counter Register
1216 AT91_REG US_TPR; // Transmit Pointer Register
1217 AT91_REG US_TCR; // Transmit Counter Register
1218 AT91_REG US_RNPR; // Receive Next Pointer Register
1219 AT91_REG US_RNCR; // Receive Next Counter Register
1220 AT91_REG US_TNPR; // Transmit Next Pointer Register
1221 AT91_REG US_TNCR; // Transmit Next Counter Register
1222 AT91_REG US_PTCR; // PDC Transfer Control Register
1223 AT91_REG US_PTSR; // PDC Transfer Status Register
1224 } AT91S_USART, *AT91PS_USART;
1225 #else
1226 #define US_CR (AT91_CAST(AT91_REG *) 0x00000000) // (US_CR) Control Register
1227 #define US_MR (AT91_CAST(AT91_REG *) 0x00000004) // (US_MR) Mode Register
1228 #define US_IER (AT91_CAST(AT91_REG *) 0x00000008) // (US_IER) Interrupt Enable Register
1229 #define US_IDR (AT91_CAST(AT91_REG *) 0x0000000C) // (US_IDR) Interrupt Disable Register
1230 #define US_IMR (AT91_CAST(AT91_REG *) 0x00000010) // (US_IMR) Interrupt Mask Register
1231 #define US_CSR (AT91_CAST(AT91_REG *) 0x00000014) // (US_CSR) Channel Status Register
1232 #define US_RHR (AT91_CAST(AT91_REG *) 0x00000018) // (US_RHR) Receiver Holding Register
1233 #define US_THR (AT91_CAST(AT91_REG *) 0x0000001C) // (US_THR) Transmitter Holding Register
1234 #define US_BRGR (AT91_CAST(AT91_REG *) 0x00000020) // (US_BRGR) Baud Rate Generator Register
1235 #define US_RTOR (AT91_CAST(AT91_REG *) 0x00000024) // (US_RTOR) Receiver Time-out Register
1236 #define US_TTGR (AT91_CAST(AT91_REG *) 0x00000028) // (US_TTGR) Transmitter Time-guard Register
1237 #define US_FIDI (AT91_CAST(AT91_REG *) 0x00000040) // (US_FIDI) FI_DI_Ratio Register
1238 #define US_NER (AT91_CAST(AT91_REG *) 0x00000044) // (US_NER) Nb Errors Register
1239 #define US_IF (AT91_CAST(AT91_REG *) 0x0000004C) // (US_IF) IRDA_FILTER Register
1240
1241 #endif
1242 // -------- US_CR : (USART Offset: 0x0) Debug Unit Control Register --------
1243 #define AT91C_US_STTBRK (0x1 << 9) // (USART) Start Break
1244 #define AT91C_US_STPBRK (0x1 << 10) // (USART) Stop Break
1245 #define AT91C_US_STTTO (0x1 << 11) // (USART) Start Time-out
1246 #define AT91C_US_SENDA (0x1 << 12) // (USART) Send Address
1247 #define AT91C_US_RSTIT (0x1 << 13) // (USART) Reset Iterations
1248 #define AT91C_US_RSTNACK (0x1 << 14) // (USART) Reset Non Acknowledge
1249 #define AT91C_US_RETTO (0x1 << 15) // (USART) Rearm Time-out
1250 #define AT91C_US_DTREN (0x1 << 16) // (USART) Data Terminal ready Enable
1251 #define AT91C_US_DTRDIS (0x1 << 17) // (USART) Data Terminal ready Disable
1252 #define AT91C_US_RTSEN (0x1 << 18) // (USART) Request to Send enable
1253 #define AT91C_US_RTSDIS (0x1 << 19) // (USART) Request to Send Disable
1254 // -------- US_MR : (USART Offset: 0x4) Debug Unit Mode Register --------
1255 #define AT91C_US_USMODE (0xF << 0) // (USART) Usart mode
1256 #define AT91C_US_USMODE_NORMAL (0x0) // (USART) Normal
1257 #define AT91C_US_USMODE_RS485 (0x1) // (USART) RS485
1258 #define AT91C_US_USMODE_HWHSH (0x2) // (USART) Hardware Handshaking
1259 #define AT91C_US_USMODE_MODEM (0x3) // (USART) Modem
1260 #define AT91C_US_USMODE_ISO7816_0 (0x4) // (USART) ISO7816 protocol: T = 0
1261 #define AT91C_US_USMODE_ISO7816_1 (0x6) // (USART) ISO7816 protocol: T = 1
1262 #define AT91C_US_USMODE_IRDA (0x8) // (USART) IrDA
1263 #define AT91C_US_USMODE_SWHSH (0xC) // (USART) Software Handshaking
1264 #define AT91C_US_CLKS (0x3 << 4) // (USART) Clock Selection (Baud Rate generator Input Clock
1265 #define AT91C_US_CLKS_CLOCK (0x0 << 4) // (USART) Clock
1266 #define AT91C_US_CLKS_FDIV1 (0x1 << 4) // (USART) fdiv1
1267 #define AT91C_US_CLKS_SLOW (0x2 << 4) // (USART) slow_clock (ARM)
1268 #define AT91C_US_CLKS_EXT (0x3 << 4) // (USART) External (SCK)
1269 #define AT91C_US_CHRL (0x3 << 6) // (USART) Clock Selection (Baud Rate generator Input Clock
1270 #define AT91C_US_CHRL_5_BITS (0x0 << 6) // (USART) Character Length: 5 bits
1271 #define AT91C_US_CHRL_6_BITS (0x1 << 6) // (USART) Character Length: 6 bits
1272 #define AT91C_US_CHRL_7_BITS (0x2 << 6) // (USART) Character Length: 7 bits
1273 #define AT91C_US_CHRL_8_BITS (0x3 << 6) // (USART) Character Length: 8 bits
1274 #define AT91C_US_SYNC (0x1 << 8) // (USART) Synchronous Mode Select
1275 #define AT91C_US_NBSTOP (0x3 << 12) // (USART) Number of Stop bits
1276 #define AT91C_US_NBSTOP_1_BIT (0x0 << 12) // (USART) 1 stop bit
1277 #define AT91C_US_NBSTOP_15_BIT (0x1 << 12) // (USART) Asynchronous (SYNC=0) 2 stop bits Synchronous (SYNC=1) 2 stop bits
1278 #define AT91C_US_NBSTOP_2_BIT (0x2 << 12) // (USART) 2 stop bits
1279 #define AT91C_US_MSBF (0x1 << 16) // (USART) Bit Order
1280 #define AT91C_US_MODE9 (0x1 << 17) // (USART) 9-bit Character length
1281 #define AT91C_US_CKLO (0x1 << 18) // (USART) Clock Output Select
1282 #define AT91C_US_OVER (0x1 << 19) // (USART) Over Sampling Mode
1283 #define AT91C_US_INACK (0x1 << 20) // (USART) Inhibit Non Acknowledge
1284 #define AT91C_US_DSNACK (0x1 << 21) // (USART) Disable Successive NACK
1285 #define AT91C_US_MAX_ITER (0x1 << 24) // (USART) Number of Repetitions
1286 #define AT91C_US_FILTER (0x1 << 28) // (USART) Receive Line Filter
1287 // -------- US_IER : (USART Offset: 0x8) Debug Unit Interrupt Enable Register --------
1288 #define AT91C_US_RXBRK (0x1 << 2) // (USART) Break Received/End of Break
1289 #define AT91C_US_TIMEOUT (0x1 << 8) // (USART) Receiver Time-out
1290 #define AT91C_US_ITERATION (0x1 << 10) // (USART) Max number of Repetitions Reached
1291 #define AT91C_US_NACK (0x1 << 13) // (USART) Non Acknowledge
1292 #define AT91C_US_RIIC (0x1 << 16) // (USART) Ring INdicator Input Change Flag
1293 #define AT91C_US_DSRIC (0x1 << 17) // (USART) Data Set Ready Input Change Flag
1294 #define AT91C_US_DCDIC (0x1 << 18) // (USART) Data Carrier Flag
1295 #define AT91C_US_CTSIC (0x1 << 19) // (USART) Clear To Send Input Change Flag
1296 // -------- US_IDR : (USART Offset: 0xc) Debug Unit Interrupt Disable Register --------
1297 // -------- US_IMR : (USART Offset: 0x10) Debug Unit Interrupt Mask Register --------
1298 // -------- US_CSR : (USART Offset: 0x14) Debug Unit Channel Status Register --------
1299 #define AT91C_US_RI (0x1 << 20) // (USART) Image of RI Input
1300 #define AT91C_US_DSR (0x1 << 21) // (USART) Image of DSR Input
1301 #define AT91C_US_DCD (0x1 << 22) // (USART) Image of DCD Input
1302 #define AT91C_US_CTS (0x1 << 23) // (USART) Image of CTS Input
1303
1304 // *****************************************************************************
1305 // SOFTWARE API DEFINITION FOR Two-wire Interface
1306 // *****************************************************************************
1307 #ifndef __ASSEMBLY__
1308 typedef struct _AT91S_TWI {
1309 AT91_REG TWI_CR; // Control Register
1310 AT91_REG TWI_MMR; // Master Mode Register
1311 AT91_REG Reserved0[1]; //
1312 AT91_REG TWI_IADR; // Internal Address Register
1313 AT91_REG TWI_CWGR; // Clock Waveform Generator Register
1314 AT91_REG Reserved1[3]; //
1315 AT91_REG TWI_SR; // Status Register
1316 AT91_REG TWI_IER; // Interrupt Enable Register
1317 AT91_REG TWI_IDR; // Interrupt Disable Register
1318 AT91_REG TWI_IMR; // Interrupt Mask Register
1319 AT91_REG TWI_RHR; // Receive Holding Register
1320 AT91_REG TWI_THR; // Transmit Holding Register
1321 AT91_REG Reserved2[50]; //
1322 AT91_REG TWI_RPR; // Receive Pointer Register
1323 AT91_REG TWI_RCR; // Receive Counter Register
1324 AT91_REG TWI_TPR; // Transmit Pointer Register
1325 AT91_REG TWI_TCR; // Transmit Counter Register
1326 AT91_REG TWI_RNPR; // Receive Next Pointer Register
1327 AT91_REG TWI_RNCR; // Receive Next Counter Register
1328 AT91_REG TWI_TNPR; // Transmit Next Pointer Register
1329 AT91_REG TWI_TNCR; // Transmit Next Counter Register
1330 AT91_REG TWI_PTCR; // PDC Transfer Control Register
1331 AT91_REG TWI_PTSR; // PDC Transfer Status Register
1332 } AT91S_TWI, *AT91PS_TWI;
1333 #else
1334 #define TWI_CR (AT91_CAST(AT91_REG *) 0x00000000) // (TWI_CR) Control Register
1335 #define TWI_MMR (AT91_CAST(AT91_REG *) 0x00000004) // (TWI_MMR) Master Mode Register
1336 #define TWI_IADR (AT91_CAST(AT91_REG *) 0x0000000C) // (TWI_IADR) Internal Address Register
1337 #define TWI_CWGR (AT91_CAST(AT91_REG *) 0x00000010) // (TWI_CWGR) Clock Waveform Generator Register
1338 #define TWI_SR (AT91_CAST(AT91_REG *) 0x00000020) // (TWI_SR) Status Register
1339 #define TWI_IER (AT91_CAST(AT91_REG *) 0x00000024) // (TWI_IER) Interrupt Enable Register
1340 #define TWI_IDR (AT91_CAST(AT91_REG *) 0x00000028) // (TWI_IDR) Interrupt Disable Register
1341 #define TWI_IMR (AT91_CAST(AT91_REG *) 0x0000002C) // (TWI_IMR) Interrupt Mask Register
1342 #define TWI_RHR (AT91_CAST(AT91_REG *) 0x00000030) // (TWI_RHR) Receive Holding Register
1343 #define TWI_THR (AT91_CAST(AT91_REG *) 0x00000034) // (TWI_THR) Transmit Holding Register
1344
1345 #endif
1346 // -------- TWI_CR : (TWI Offset: 0x0) TWI Control Register --------
1347 #define AT91C_TWI_START (0x1 << 0) // (TWI) Send a START Condition
1348 #define AT91C_TWI_STOP (0x1 << 1) // (TWI) Send a STOP Condition
1349 #define AT91C_TWI_MSEN (0x1 << 2) // (TWI) TWI Master Transfer Enabled
1350 #define AT91C_TWI_MSDIS (0x1 << 3) // (TWI) TWI Master Transfer Disabled
1351 #define AT91C_TWI_SWRST (0x1 << 7) // (TWI) Software Reset
1352 // -------- TWI_MMR : (TWI Offset: 0x4) TWI Master Mode Register --------
1353 #define AT91C_TWI_IADRSZ (0x3 << 8) // (TWI) Internal Device Address Size
1354 #define AT91C_TWI_IADRSZ_NO (0x0 << 8) // (TWI) No internal device address
1355 #define AT91C_TWI_IADRSZ_1_BYTE (0x1 << 8) // (TWI) One-byte internal device address
1356 #define AT91C_TWI_IADRSZ_2_BYTE (0x2 << 8) // (TWI) Two-byte internal device address
1357 #define AT91C_TWI_IADRSZ_3_BYTE (0x3 << 8) // (TWI) Three-byte internal device address
1358 #define AT91C_TWI_MREAD (0x1 << 12) // (TWI) Master Read Direction
1359 #define AT91C_TWI_DADR (0x7F << 16) // (TWI) Device Address
1360 // -------- TWI_CWGR : (TWI Offset: 0x10) TWI Clock Waveform Generator Register --------
1361 #define AT91C_TWI_CLDIV (0xFF << 0) // (TWI) Clock Low Divider
1362 #define AT91C_TWI_CHDIV (0xFF << 8) // (TWI) Clock High Divider
1363 #define AT91C_TWI_CKDIV (0x7 << 16) // (TWI) Clock Divider
1364 // -------- TWI_SR : (TWI Offset: 0x20) TWI Status Register --------
1365 #define AT91C_TWI_TXCOMP (0x1 << 0) // (TWI) Transmission Completed
1366 #define AT91C_TWI_RXRDY (0x1 << 1) // (TWI) Receive holding register ReaDY
1367 #define AT91C_TWI_TXRDY (0x1 << 2) // (TWI) Transmit holding register ReaDY
1368 #define AT91C_TWI_OVRE (0x1 << 6) // (TWI) Overrun Error
1369 #define AT91C_TWI_UNRE (0x1 << 7) // (TWI) Underrun Error
1370 #define AT91C_TWI_NACK (0x1 << 8) // (TWI) Not Acknowledged
1371 #define AT91C_TWI_ENDRX (0x1 << 12) // (TWI)
1372 #define AT91C_TWI_ENDTX (0x1 << 13) // (TWI)
1373 #define AT91C_TWI_RXBUFF (0x1 << 14) // (TWI)
1374 #define AT91C_TWI_TXBUFE (0x1 << 15) // (TWI)
1375 // -------- TWI_IER : (TWI Offset: 0x24) TWI Interrupt Enable Register --------
1376 // -------- TWI_IDR : (TWI Offset: 0x28) TWI Interrupt Disable Register --------
1377 // -------- TWI_IMR : (TWI Offset: 0x2c) TWI Interrupt Mask Register --------
1378
1379 // *****************************************************************************
1380 // SOFTWARE API DEFINITION FOR Timer Counter Channel Interface
1381 // *****************************************************************************
1382 #ifndef __ASSEMBLY__
1383 typedef struct _AT91S_TC {
1384 AT91_REG TC_CCR; // Channel Control Register
1385 AT91_REG TC_CMR; // Channel Mode Register (Capture Mode / Waveform Mode)
1386 AT91_REG Reserved0[2]; //
1387 AT91_REG TC_CV; // Counter Value
1388 AT91_REG TC_RA; // Register A
1389 AT91_REG TC_RB; // Register B
1390 AT91_REG TC_RC; // Register C
1391 AT91_REG TC_SR; // Status Register
1392 AT91_REG TC_IER; // Interrupt Enable Register
1393 AT91_REG TC_IDR; // Interrupt Disable Register
1394 AT91_REG TC_IMR; // Interrupt Mask Register
1395 } AT91S_TC, *AT91PS_TC;
1396 #else
1397 #define TC_CCR (AT91_CAST(AT91_REG *) 0x00000000) // (TC_CCR) Channel Control Register
1398 #define TC_CMR (AT91_CAST(AT91_REG *) 0x00000004) // (TC_CMR) Channel Mode Register (Capture Mode / Waveform Mode)
1399 #define TC_CV (AT91_CAST(AT91_REG *) 0x00000010) // (TC_CV) Counter Value
1400 #define TC_RA (AT91_CAST(AT91_REG *) 0x00000014) // (TC_RA) Register A
1401 #define TC_RB (AT91_CAST(AT91_REG *) 0x00000018) // (TC_RB) Register B
1402 #define TC_RC (AT91_CAST(AT91_REG *) 0x0000001C) // (TC_RC) Register C
1403 #define TC_SR (AT91_CAST(AT91_REG *) 0x00000020) // (TC_SR) Status Register
1404 #define TC_IER (AT91_CAST(AT91_REG *) 0x00000024) // (TC_IER) Interrupt Enable Register
1405 #define TC_IDR (AT91_CAST(AT91_REG *) 0x00000028) // (TC_IDR) Interrupt Disable Register
1406 #define TC_IMR (AT91_CAST(AT91_REG *) 0x0000002C) // (TC_IMR) Interrupt Mask Register
1407
1408 #endif
1409 // -------- TC_CCR : (TC Offset: 0x0) TC Channel Control Register --------
1410 #define AT91C_TC_CLKEN (0x1 << 0) // (TC) Counter Clock Enable Command
1411 #define AT91C_TC_CLKDIS (0x1 << 1) // (TC) Counter Clock Disable Command
1412 #define AT91C_TC_SWTRG (0x1 << 2) // (TC) Software Trigger Command
1413 // -------- TC_CMR : (TC Offset: 0x4) TC Channel Mode Register: Capture Mode / Waveform Mode --------
1414 #define AT91C_TC_CLKS (0x7 << 0) // (TC) Clock Selection
1415 #define AT91C_TC_CLKS_TIMER_DIV1_CLOCK (0x0) // (TC) Clock selected: TIMER_DIV1_CLOCK
1416 #define AT91C_TC_CLKS_TIMER_DIV2_CLOCK (0x1) // (TC) Clock selected: TIMER_DIV2_CLOCK
1417 #define AT91C_TC_CLKS_TIMER_DIV3_CLOCK (0x2) // (TC) Clock selected: TIMER_DIV3_CLOCK
1418 #define AT91C_TC_CLKS_TIMER_DIV4_CLOCK (0x3) // (TC) Clock selected: TIMER_DIV4_CLOCK
1419 #define AT91C_TC_CLKS_TIMER_DIV5_CLOCK (0x4) // (TC) Clock selected: TIMER_DIV5_CLOCK
1420 #define AT91C_TC_CLKS_XC0 (0x5) // (TC) Clock selected: XC0
1421 #define AT91C_TC_CLKS_XC1 (0x6) // (TC) Clock selected: XC1
1422 #define AT91C_TC_CLKS_XC2 (0x7) // (TC) Clock selected: XC2
1423 #define AT91C_TC_CLKI (0x1 << 3) // (TC) Clock Invert
1424 #define AT91C_TC_BURST (0x3 << 4) // (TC) Burst Signal Selection
1425 #define AT91C_TC_BURST_NONE (0x0 << 4) // (TC) The clock is not gated by an external signal
1426 #define AT91C_TC_BURST_XC0 (0x1 << 4) // (TC) XC0 is ANDed with the selected clock
1427 #define AT91C_TC_BURST_XC1 (0x2 << 4) // (TC) XC1 is ANDed with the selected clock
1428 #define AT91C_TC_BURST_XC2 (0x3 << 4) // (TC) XC2 is ANDed with the selected clock
1429 #define AT91C_TC_CPCSTOP (0x1 << 6) // (TC) Counter Clock Stopped with RC Compare
1430 #define AT91C_TC_LDBSTOP (0x1 << 6) // (TC) Counter Clock Stopped with RB Loading
1431 #define AT91C_TC_CPCDIS (0x1 << 7) // (TC) Counter Clock Disable with RC Compare
1432 #define AT91C_TC_LDBDIS (0x1 << 7) // (TC) Counter Clock Disabled with RB Loading
1433 #define AT91C_TC_ETRGEDG (0x3 << 8) // (TC) External Trigger Edge Selection
1434 #define AT91C_TC_ETRGEDG_NONE (0x0 << 8) // (TC) Edge: None
1435 #define AT91C_TC_ETRGEDG_RISING (0x1 << 8) // (TC) Edge: rising edge
1436 #define AT91C_TC_ETRGEDG_FALLING (0x2 << 8) // (TC) Edge: falling edge
1437 #define AT91C_TC_ETRGEDG_BOTH (0x3 << 8) // (TC) Edge: each edge
1438 #define AT91C_TC_EEVTEDG (0x3 << 8) // (TC) External Event Edge Selection
1439 #define AT91C_TC_EEVTEDG_NONE (0x0 << 8) // (TC) Edge: None
1440 #define AT91C_TC_EEVTEDG_RISING (0x1 << 8) // (TC) Edge: rising edge
1441 #define AT91C_TC_EEVTEDG_FALLING (0x2 << 8) // (TC) Edge: falling edge
1442 #define AT91C_TC_EEVTEDG_BOTH (0x3 << 8) // (TC) Edge: each edge
1443 #define AT91C_TC_EEVT (0x3 << 10) // (TC) External Event Selection
1444 #define AT91C_TC_EEVT_TIOB (0x0 << 10) // (TC) Signal selected as external event: TIOB TIOB direction: input
1445 #define AT91C_TC_EEVT_XC0 (0x1 << 10) // (TC) Signal selected as external event: XC0 TIOB direction: output
1446 #define AT91C_TC_EEVT_XC1 (0x2 << 10) // (TC) Signal selected as external event: XC1 TIOB direction: output
1447 #define AT91C_TC_EEVT_XC2 (0x3 << 10) // (TC) Signal selected as external event: XC2 TIOB direction: output
1448 #define AT91C_TC_ABETRG (0x1 << 10) // (TC) TIOA or TIOB External Trigger Selection
1449 #define AT91C_TC_ENETRG (0x1 << 12) // (TC) External Event Trigger enable
1450 #define AT91C_TC_WAVESEL (0x3 << 13) // (TC) Waveform Selection
1451 #define AT91C_TC_WAVESEL_UP (0x0 << 13) // (TC) UP mode without atomatic trigger on RC Compare
1452 #define AT91C_TC_WAVESEL_UPDOWN (0x1 << 13) // (TC) UPDOWN mode without automatic trigger on RC Compare
1453 #define AT91C_TC_WAVESEL_UP_AUTO (0x2 << 13) // (TC) UP mode with automatic trigger on RC Compare
1454 #define AT91C_TC_WAVESEL_UPDOWN_AUTO (0x3 << 13) // (TC) UPDOWN mode with automatic trigger on RC Compare
1455 #define AT91C_TC_CPCTRG (0x1 << 14) // (TC) RC Compare Trigger Enable
1456 #define AT91C_TC_WAVE (0x1 << 15) // (TC)
1457 #define AT91C_TC_ACPA (0x3 << 16) // (TC) RA Compare Effect on TIOA
1458 #define T91C_TC_ACPA_NONE (0x0 << 16) // (TC) Effect: none
1459 #define AT91C_TC_ACPA_SET (0x1 << 16) // (TC) Effect: set
1460 #define AT91C_TC_ACPA_CLEAR (0x2 << 16) // (TC) Effect: clear
1461 #define AT91C_TC_ACPA_TOGGLE (0x3 << 16) // (TC) Effect: toggle
1462 #define AT91C_TC_LDRA (0x3 << 16) // (TC) RA Loading Selection
1463 #define T91C_TC_LDRA_NONE (0x0 << 16) // (TC) Edge: None
1464 #define AT91C_TC_LDRA_RISING (0x1 << 16) // (TC) Edge: rising edge of TIOA
1465 #define AT91C_TC_LDRA_FALLING (0x2 << 16) // (TC) Edge: falling edge of TIOA
1466 #define AT91C_TC_LDRA_BOTH (0x3 << 16) // (TC) Edge: each edge of TIOA
1467 #define AT91C_TC_ACPC (0x3 << 18) // (TC) RC Compare Effect on TIOA
1468 #define AT91C_TC_ACPC_NONE (0x0 << 18) // (TC) Effect: none
1469 #define AT91C_TC_ACPC_SET (0x1 << 18) // (TC) Effect: set
1470 #define AT91C_TC_ACPC_CLEAR (0x2 << 18) // (TC) Effect: clear
1471 #define AT91C_TC_ACPC_TOGGLE (0x3 << 18) // (TC) Effect: toggle
1472 #define AT91C_TC_LDRB (0x3 << 18) // (TC) RB Loading Selection
1473 #define AT91C_TC_LDRB_NONE (0x0 << 18) // (TC) Edge: None
1474 #define AT91C_TC_LDRB_RISING (0x1 << 18) // (TC) Edge: rising edge of TIOA
1475 #define AT91C_TC_LDRB_FALLING (0x2 << 18) // (TC) Edge: falling edge of TIOA
1476 #define AT91C_TC_LDRB_BOTH (0x3 << 18) // (TC) Edge: each edge of TIOA
1477 #define AT91C_TC_AEEVT (0x3 << 20) // (TC) External Event Effect on TIOA
1478 #define AT91C_TC_AEEVT_NONE (0x0 << 20) // (TC) Effect: none
1479 #define AT91C_TC_AEEVT_SET (0x1 << 20) // (TC) Effect: set
1480 #define AT91C_TC_AEEVT_CLEAR (0x2 << 20) // (TC) Effect: clear
1481 #define AT91C_TC_AEEVT_TOGGLE (0x3 << 20) // (TC) Effect: toggle
1482 #define AT91C_TC_ASWTRG (0x3 << 22) // (TC) Software Trigger Effect on TIOA
1483 #define AT91C_TC_ASWTRG_NONE (0x0 << 22) // (TC) Effect: none
1484 #define AT91C_TC_ASWTRG_SET (0x1 << 22) // (TC) Effect: set
1485 #define AT91C_TC_ASWTRG_CLEAR (0x2 << 22) // (TC) Effect: clear
1486 #define AT91C_TC_ASWTRG_TOGGLE (0x3 << 22) // (TC) Effect: toggle
1487 #define AT91C_TC_BCPB (0x3 << 24) // (TC) RB Compare Effect on TIOB
1488 #define AT91C_TC_BCPB_NONE (0x0 << 24) // (TC) Effect: none
1489 #define AT91C_TC_BCPB_SET (0x1 << 24) // (TC) Effect: set
1490 #define AT91C_TC_BCPB_CLEAR (0x2 << 24) // (TC) Effect: clear
1491 #define AT91C_TC_BCPB_TOGGLE (0x3 << 24) // (TC) Effect: toggle
1492 #define AT91C_TC_BCPC (0x3 << 26) // (TC) RC Compare Effect on TIOB
1493 #define AT91C_TC_BCPC_NONE (0x0 << 26) // (TC) Effect: none
1494 #define AT91C_TC_BCPC_SET (0x1 << 26) // (TC) Effect: set
1495 #define AT91C_TC_BCPC_CLEAR (0x2 << 26) // (TC) Effect: clear
1496 #define AT91C_TC_BCPC_TOGGLE (0x3 << 26) // (TC) Effect: toggle
1497 #define AT91C_TC_BEEVT (0x3 << 28) // (TC) External Event Effect on TIOB
1498 #define AT91C_TC_BEEVT_NONE (0x0 << 28) // (TC) Effect: none
1499 #define AT91C_TC_BEEVT_SET (0x1 << 28) // (TC) Effect: set
1500 #define AT91C_TC_BEEVT_CLEAR (0x2 << 28) // (TC) Effect: clear
1501 #define AT91C_TC_BEEVT_TOGGLE (0x3 << 28) // (TC) Effect: toggle
1502 #define AT91C_TC_BSWTRG (0x3 << 30) // (TC) Software Trigger Effect on TIOB
1503 #define AT91C_TC_BSWTRG_NONE (0x0 << 30) // (TC) Effect: none
1504 #define AT91C_TC_BSWTRG_SET (0x1 << 30) // (TC) Effect: set
1505 #define AT91C_TC_BSWTRG_CLEAR (0x2 << 30) // (TC) Effect: clear
1506 #define AT91C_TC_BSWTRG_TOGGLE (0x3 << 30) // (TC) Effect: toggle
1507 // -------- TC_SR : (TC Offset: 0x20) TC Channel Status Register --------
1508 #define AT91C_TC_COVFS (0x1 << 0) // (TC) Counter Overflow
1509 #define AT91C_TC_LOVRS (0x1 << 1) // (TC) Load Overrun
1510 #define AT91C_TC_CPAS (0x1 << 2) // (TC) RA Compare
1511 #define AT91C_TC_CPBS (0x1 << 3) // (TC) RB Compare
1512 #define AT91C_TC_CPCS (0x1 << 4) // (TC) RC Compare
1513 #define AT91C_TC_LDRAS (0x1 << 5) // (TC) RA Loading
1514 #define AT91C_TC_LDRBS (0x1 << 6) // (TC) RB Loading
1515 #define AT91C_TC_ETRGS (0x1 << 7) // (TC) External Trigger
1516 #define AT91C_TC_CLKSTA (0x1 << 16) // (TC) Clock Enabling
1517 #define AT91C_TC_MTIOA (0x1 << 17) // (TC) TIOA Mirror
1518 #define AT91C_TC_MTIOB (0x1 << 18) // (TC) TIOA Mirror
1519 // -------- TC_IER : (TC Offset: 0x24) TC Channel Interrupt Enable Register --------
1520 // -------- TC_IDR : (TC Offset: 0x28) TC Channel Interrupt Disable Register --------
1521 // -------- TC_IMR : (TC Offset: 0x2c) TC Channel Interrupt Mask Register --------
1522
1523 // *****************************************************************************
1524 // SOFTWARE API DEFINITION FOR Timer Counter Interface
1525 // *****************************************************************************
1526 #ifndef __ASSEMBLY__
1527 typedef struct _AT91S_TCB {
1528 AT91S_TC TCB_TC0; // TC Channel 0
1529 AT91_REG Reserved0[4]; //
1530 AT91S_TC TCB_TC1; // TC Channel 1
1531 AT91_REG Reserved1[4]; //
1532 AT91S_TC TCB_TC2; // TC Channel 2
1533 AT91_REG Reserved2[4]; //
1534 AT91_REG TCB_BCR; // TC Block Control Register
1535 AT91_REG TCB_BMR; // TC Block Mode Register
1536 } AT91S_TCB, *AT91PS_TCB;
1537 #else
1538 #define TCB_BCR (AT91_CAST(AT91_REG *) 0x000000C0) // (TCB_BCR) TC Block Control Register
1539 #define TCB_BMR (AT91_CAST(AT91_REG *) 0x000000C4) // (TCB_BMR) TC Block Mode Register
1540
1541 #endif
1542 // -------- TCB_BCR : (TCB Offset: 0xc0) TC Block Control Register --------
1543 #define AT91C_TCB_SYNC (0x1 << 0) // (TCB) Synchro Command
1544 // -------- TCB_BMR : (TCB Offset: 0xc4) TC Block Mode Register --------
1545 #define AT91C_TCB_TC0XC0S (0x3 << 0) // (TCB) External Clock Signal 0 Selection
1546 #define AT91C_TCB_TC0XC0S_TCLK0 (0x0) // (TCB) TCLK0 connected to XC0
1547 #define AT91C_TCB_TC0XC0S_NONE (0x1) // (TCB) None signal connected to XC0
1548 #define AT91C_TCB_TC0XC0S_TIOA1 (0x2) // (TCB) TIOA1 connected to XC0
1549 #define AT91C_TCB_TC0XC0S_TIOA2 (0x3) // (TCB) TIOA2 connected to XC0
1550 #define AT91C_TCB_TC1XC1S (0x3 << 2) // (TCB) External Clock Signal 1 Selection
1551 #define AT91C_TCB_TC1XC1S_TCLK1 (0x0 << 2) // (TCB) TCLK1 connected to XC1
1552 #define AT91C_TCB_TC1XC1S_NONE (0x1 << 2) // (TCB) None signal connected to XC1
1553 #define AT91C_TCB_TC1XC1S_TIOA0 (0x2 << 2) // (TCB) TIOA0 connected to XC1
1554 #define AT91C_TCB_TC1XC1S_TIOA2 (0x3 << 2) // (TCB) TIOA2 connected to XC1
1555 #define AT91C_TCB_TC2XC2S (0x3 << 4) // (TCB) External Clock Signal 2 Selection
1556 #define AT91C_TCB_TC2XC2S_TCLK2 (0x0 << 4) // (TCB) TCLK2 connected to XC2
1557 #define AT91C_TCB_TC2XC2S_NONE (0x1 << 4) // (TCB) None signal connected to XC2
1558 #define AT91C_TCB_TC2XC2S_TIOA0 (0x2 << 4) // (TCB) TIOA0 connected to XC2
1559 #define AT91C_TCB_TC2XC2S_TIOA1 (0x3 << 4) // (TCB) TIOA2 connected to XC2
1560
1561 // *****************************************************************************
1562 // SOFTWARE API DEFINITION FOR PWMC Channel Interface
1563 // *****************************************************************************
1564 #ifndef __ASSEMBLY__
1565 typedef struct _AT91S_PWMC_CH {
1566 AT91_REG PWMC_CMR; // Channel Mode Register
1567 AT91_REG PWMC_CDTYR; // Channel Duty Cycle Register
1568 AT91_REG PWMC_CPRDR; // Channel Period Register
1569 AT91_REG PWMC_CCNTR; // Channel Counter Register
1570 AT91_REG PWMC_CUPDR; // Channel Update Register
1571 AT91_REG PWMC_Reserved[3]; // Reserved
1572 } AT91S_PWMC_CH, *AT91PS_PWMC_CH;
1573 #else
1574 #define PWMC_CMR (AT91_CAST(AT91_REG *) 0x00000000) // (PWMC_CMR) Channel Mode Register
1575 #define PWMC_CDTYR (AT91_CAST(AT91_REG *) 0x00000004) // (PWMC_CDTYR) Channel Duty Cycle Register
1576 #define PWMC_CPRDR (AT91_CAST(AT91_REG *) 0x00000008) // (PWMC_CPRDR) Channel Period Register
1577 #define PWMC_CCNTR (AT91_CAST(AT91_REG *) 0x0000000C) // (PWMC_CCNTR) Channel Counter Register
1578 #define PWMC_CUPDR (AT91_CAST(AT91_REG *) 0x00000010) // (PWMC_CUPDR) Channel Update Register
1579 #define Reserved (AT91_CAST(AT91_REG *) 0x00000014) // (Reserved) Reserved
1580
1581 #endif
1582 // -------- PWMC_CMR : (PWMC_CH Offset: 0x0) PWMC Channel Mode Register --------
1583 #define AT91C_PWMC_CPRE (0xF << 0) // (PWMC_CH) Channel Pre-scaler : PWMC_CLKx
1584 #define AT91C_PWMC_CPRE_MCK (0x0) // (PWMC_CH)
1585 #define AT91C_PWMC_CPRE_MCKA (0xB) // (PWMC_CH)
1586 #define AT91C_PWMC_CPRE_MCKB (0xC) // (PWMC_CH)
1587 #define AT91C_PWMC_CALG (0x1 << 8) // (PWMC_CH) Channel Alignment
1588 #define AT91C_PWMC_CPOL (0x1 << 9) // (PWMC_CH) Channel Polarity
1589 #define AT91C_PWMC_CPD (0x1 << 10) // (PWMC_CH) Channel Update Period
1590 // -------- PWMC_CDTYR : (PWMC_CH Offset: 0x4) PWMC Channel Duty Cycle Register --------
1591 #define AT91C_PWMC_CDTY (0x0 << 0) // (PWMC_CH) Channel Duty Cycle
1592 // -------- PWMC_CPRDR : (PWMC_CH Offset: 0x8) PWMC Channel Period Register --------
1593 #define AT91C_PWMC_CPRD (0x0 << 0) // (PWMC_CH) Channel Period
1594 // -------- PWMC_CCNTR : (PWMC_CH Offset: 0xc) PWMC Channel Counter Register --------
1595 #define AT91C_PWMC_CCNT (0x0 << 0) // (PWMC_CH) Channel Counter
1596 // -------- PWMC_CUPDR : (PWMC_CH Offset: 0x10) PWMC Channel Update Register --------
1597 #define AT91C_PWMC_CUPD (0x0 << 0) // (PWMC_CH) Channel Update
1598
1599 // *****************************************************************************
1600 // SOFTWARE API DEFINITION FOR Pulse Width Modulation Controller Interface
1601 // *****************************************************************************
1602 #ifndef __ASSEMBLY__
1603 typedef struct _AT91S_PWMC {
1604 AT91_REG PWMC_MR; // PWMC Mode Register
1605 AT91_REG PWMC_ENA; // PWMC Enable Register
1606 AT91_REG PWMC_DIS; // PWMC Disable Register
1607 AT91_REG PWMC_SR; // PWMC Status Register
1608 AT91_REG PWMC_IER; // PWMC Interrupt Enable Register
1609 AT91_REG PWMC_IDR; // PWMC Interrupt Disable Register
1610 AT91_REG PWMC_IMR; // PWMC Interrupt Mask Register
1611 AT91_REG PWMC_ISR; // PWMC Interrupt Status Register
1612 AT91_REG Reserved0[55]; //
1613 AT91_REG PWMC_VR; // PWMC Version Register
1614 AT91_REG Reserved1[64]; //
1615 AT91S_PWMC_CH PWMC_CH[4]; // PWMC Channel
1616 } AT91S_PWMC, *AT91PS_PWMC;
1617 #else
1618 #define PWMC_MR (AT91_CAST(AT91_REG *) 0x00000000) // (PWMC_MR) PWMC Mode Register
1619 #define PWMC_ENA (AT91_CAST(AT91_REG *) 0x00000004) // (PWMC_ENA) PWMC Enable Register
1620 #define PWMC_DIS (AT91_CAST(AT91_REG *) 0x00000008) // (PWMC_DIS) PWMC Disable Register
1621 #define PWMC_SR (AT91_CAST(AT91_REG *) 0x0000000C) // (PWMC_SR) PWMC Status Register
1622 #define PWMC_IER (AT91_CAST(AT91_REG *) 0x00000010) // (PWMC_IER) PWMC Interrupt Enable Register
1623 #define PWMC_IDR (AT91_CAST(AT91_REG *) 0x00000014) // (PWMC_IDR) PWMC Interrupt Disable Register
1624 #define PWMC_IMR (AT91_CAST(AT91_REG *) 0x00000018) // (PWMC_IMR) PWMC Interrupt Mask Register
1625 #define PWMC_ISR (AT91_CAST(AT91_REG *) 0x0000001C) // (PWMC_ISR) PWMC Interrupt Status Register
1626 #define PWMC_VR (AT91_CAST(AT91_REG *) 0x000000FC) // (PWMC_VR) PWMC Version Register
1627
1628 #endif
1629 // -------- PWMC_MR : (PWMC Offset: 0x0) PWMC Mode Register --------
1630 #define AT91C_PWMC_DIVA (0xFF << 0) // (PWMC) CLKA divide factor.
1631 #define AT91C_PWMC_PREA (0xF << 8) // (PWMC) Divider Input Clock Prescaler A
1632 #define AT91C_PWMC_PREA_MCK (0x0 << 8) // (PWMC)
1633 #define AT91C_PWMC_DIVB (0xFF << 16) // (PWMC) CLKB divide factor.
1634 #define AT91C_PWMC_PREB (0xF << 24) // (PWMC) Divider Input Clock Prescaler B
1635 #define AT91C_PWMC_PREB_MCK (0x0 << 24) // (PWMC)
1636 // -------- PWMC_ENA : (PWMC Offset: 0x4) PWMC Enable Register --------
1637 #define AT91C_PWMC_CHID0 (0x1 << 0) // (PWMC) Channel ID 0
1638 #define AT91C_PWMC_CHID1 (0x1 << 1) // (PWMC) Channel ID 1
1639 #define AT91C_PWMC_CHID2 (0x1 << 2) // (PWMC) Channel ID 2
1640 #define AT91C_PWMC_CHID3 (0x1 << 3) // (PWMC) Channel ID 3
1641 // -------- PWMC_DIS : (PWMC Offset: 0x8) PWMC Disable Register --------
1642 // -------- PWMC_SR : (PWMC Offset: 0xc) PWMC Status Register --------
1643 // -------- PWMC_IER : (PWMC Offset: 0x10) PWMC Interrupt Enable Register --------
1644 // -------- PWMC_IDR : (PWMC Offset: 0x14) PWMC Interrupt Disable Register --------
1645 // -------- PWMC_IMR : (PWMC Offset: 0x18) PWMC Interrupt Mask Register --------
1646 // -------- PWMC_ISR : (PWMC Offset: 0x1c) PWMC Interrupt Status Register --------
1647
1648 // *****************************************************************************
1649 // SOFTWARE API DEFINITION FOR USB Device Interface
1650 // *****************************************************************************
1651 #ifndef __ASSEMBLY__
1652 typedef struct _AT91S_UDP {
1653 AT91_REG UDP_NUM; // Frame Number Register
1654 AT91_REG UDP_GLBSTATE; // Global State Register
1655 AT91_REG UDP_FADDR; // Function Address Register
1656 AT91_REG Reserved0[1]; //
1657 AT91_REG UDP_IER; // Interrupt Enable Register
1658 AT91_REG UDP_IDR; // Interrupt Disable Register
1659 AT91_REG UDP_IMR; // Interrupt Mask Register
1660 AT91_REG UDP_ISR; // Interrupt Status Register
1661 AT91_REG UDP_ICR; // Interrupt Clear Register
1662 AT91_REG Reserved1[1]; //
1663 AT91_REG UDP_RSTEP; // Reset Endpoint Register
1664 AT91_REG Reserved2[1]; //
1665 AT91_REG UDP_CSR[4]; // Endpoint Control and Status Register
1666 AT91_REG Reserved3[4]; //
1667 AT91_REG UDP_FDR[4]; // Endpoint FIFO Data Register
1668 AT91_REG Reserved4[5]; //
1669 AT91_REG UDP_TXVC; // Transceiver Control Register
1670 } AT91S_UDP, *AT91PS_UDP;
1671 #else
1672 #define UDP_FRM_NUM (AT91_CAST(AT91_REG *) 0x00000000) // (UDP_FRM_NUM) Frame Number Register
1673 #define UDP_GLBSTATE (AT91_CAST(AT91_REG *) 0x00000004) // (UDP_GLBSTATE) Global State Register
1674 #define UDP_FADDR (AT91_CAST(AT91_REG *) 0x00000008) // (UDP_FADDR) Function Address Register
1675 #define UDP_IER (AT91_CAST(AT91_REG *) 0x00000010) // (UDP_IER) Interrupt Enable Register
1676 #define UDP_IDR (AT91_CAST(AT91_REG *) 0x00000014) // (UDP_IDR) Interrupt Disable Register
1677 #define UDP_IMR (AT91_CAST(AT91_REG *) 0x00000018) // (UDP_IMR) Interrupt Mask Register
1678 #define UDP_ISR (AT91_CAST(AT91_REG *) 0x0000001C) // (UDP_ISR) Interrupt Status Register
1679 #define UDP_ICR (AT91_CAST(AT91_REG *) 0x00000020) // (UDP_ICR) Interrupt Clear Register
1680 #define UDP_RSTEP (AT91_CAST(AT91_REG *) 0x00000028) // (UDP_RSTEP) Reset Endpoint Register
1681 #define UDP_CSR (AT91_CAST(AT91_REG *) 0x00000030) // (UDP_CSR) Endpoint Control and Status Register
1682 #define UDP_FDR (AT91_CAST(AT91_REG *) 0x00000050) // (UDP_FDR) Endpoint FIFO Data Register
1683 #define UDP_TXVC (AT91_CAST(AT91_REG *) 0x00000074) // (UDP_TXVC) Transceiver Control Register
1684
1685 #endif
1686 // -------- UDP_FRM_NUM : (UDP Offset: 0x0) USB Frame Number Register --------
1687 #define AT91C_UDP_FRM_NUM (0x7FF << 0) // (UDP) Frame Number as Defined in the Packet Field Formats
1688 #define AT91C_UDP_FRM_ERR (0x1 << 16) // (UDP) Frame Error
1689 #define AT91C_UDP_FRM_OK (0x1 << 17) // (UDP) Frame OK
1690 // -------- UDP_GLB_STATE : (UDP Offset: 0x4) USB Global State Register --------
1691 #define AT91C_UDP_FADDEN (0x1 << 0) // (UDP) Function Address Enable
1692 #define AT91C_UDP_CONFG (0x1 << 1) // (UDP) Configured
1693 #define AT91C_UDP_ESR (0x1 << 2) // (UDP) Enable Send Resume
1694 #define AT91C_UDP_RSMINPR (0x1 << 3) // (UDP) A Resume Has Been Sent to the Host
1695 #define AT91C_UDP_RMWUPE (0x1 << 4) // (UDP) Remote Wake Up Enable
1696 // -------- UDP_FADDR : (UDP Offset: 0x8) USB Function Address Register --------
1697 #define AT91C_UDP_FADD (0xFF << 0) // (UDP) Function Address Value
1698 #define AT91C_UDP_FEN (0x1 << 8) // (UDP) Function Enable
1699 // -------- UDP_IER : (UDP Offset: 0x10) USB Interrupt Enable Register --------
1700 #define AT91C_UDP_EPINT0 (0x1 << 0) // (UDP) Endpoint 0 Interrupt
1701 #define AT91C_UDP_EPINT1 (0x1 << 1) // (UDP) Endpoint 0 Interrupt
1702 #define AT91C_UDP_EPINT2 (0x1 << 2) // (UDP) Endpoint 2 Interrupt
1703 #define AT91C_UDP_EPINT3 (0x1 << 3) // (UDP) Endpoint 3 Interrupt
1704 #define AT91C_UDP_RXSUSP (0x1 << 8) // (UDP) USB Suspend Interrupt
1705 #define AT91C_UDP_RXRSM (0x1 << 9) // (UDP) USB Resume Interrupt
1706 #define AT91C_UDP_EXTRSM (0x1 << 10) // (UDP) USB External Resume Interrupt
1707 #define AT91C_UDP_SOFINT (0x1 << 11) // (UDP) USB Start Of frame Interrupt
1708 #define AT91C_UDP_WAKEUP (0x1 << 13) // (UDP) USB Resume Interrupt
1709 // -------- UDP_IDR : (UDP Offset: 0x14) USB Interrupt Disable Register --------
1710 // -------- UDP_IMR : (UDP Offset: 0x18) USB Interrupt Mask Register --------
1711 // -------- UDP_ISR : (UDP Offset: 0x1c) USB Interrupt Status Register --------
1712 #define AT91C_UDP_ENDBUSRES (0x1 << 12) // (UDP) USB End Of Bus Reset Interrupt
1713 // -------- UDP_ICR : (UDP Offset: 0x20) USB Interrupt Clear Register --------
1714 // -------- UDP_RST_EP : (UDP Offset: 0x28) USB Reset Endpoint Register --------
1715 #define AT91C_UDP_EP0 (0x1 << 0) // (UDP) Reset Endpoint 0
1716 #define AT91C_UDP_EP1 (0x1 << 1) // (UDP) Reset Endpoint 1
1717 #define AT91C_UDP_EP2 (0x1 << 2) // (UDP) Reset Endpoint 2
1718 #define AT91C_UDP_EP3 (0x1 << 3) // (UDP) Reset Endpoint 3
1719 // -------- UDP_CSR : (UDP Offset: 0x30) USB Endpoint Control and Status Register --------
1720 #define AT91C_UDP_TXCOMP (0x1 << 0) // (UDP) Generates an IN packet with data previously written in the DPR
1721 #define AT91C_UDP_RX_DATA_BK0 (0x1 << 1) // (UDP) Receive Data Bank 0
1722 #define AT91C_UDP_RXSETUP (0x1 << 2) // (UDP) Sends STALL to the Host (Control endpoints)
1723 #define AT91C_UDP_ISOERROR (0x1 << 3) // (UDP) Isochronous error (Isochronous endpoints)
1724 #define AT91C_UDP_STALLSENT (0x1 << 3) // (UDP) Stall sent (Control, bulk, interrupt endpoints)
1725 #define AT91C_UDP_TXPKTRDY (0x1 << 4) // (UDP) Transmit Packet Ready
1726 #define AT91C_UDP_FORCESTALL (0x1 << 5) // (UDP) Force Stall (used by Control, Bulk and Isochronous endpoints).
1727 #define AT91C_UDP_RX_DATA_BK1 (0x1 << 6) // (UDP) Receive Data Bank 1 (only used by endpoints with ping-pong attributes).
1728 #define AT91C_UDP_DIR (0x1 << 7) // (UDP) Transfer Direction
1729 #define AT91C_UDP_EPTYPE (0x7 << 8) // (UDP) Endpoint type
1730 #define AT91C_UDP_EPTYPE_CTRL (0x0 << 8) // (UDP) Control
1731 #define AT91C_UDP_EPTYPE_ISO_OUT (0x1 << 8) // (UDP) Isochronous OUT
1732 #define AT91C_UDP_EPTYPE_BULK_OUT (0x2 << 8) // (UDP) Bulk OUT
1733 #define AT91C_UDP_EPTYPE_INT_OUT (0x3 << 8) // (UDP) Interrupt OUT
1734 #define AT91C_UDP_EPTYPE_ISO_IN (0x5 << 8) // (UDP) Isochronous IN
1735 #define AT91C_UDP_EPTYPE_BULK_IN (0x6 << 8) // (UDP) Bulk IN
1736 #define AT91C_UDP_EPTYPE_INT_IN (0x7 << 8) // (UDP) Interrupt IN
1737 #define AT91C_UDP_DTGLE (0x1 << 11) // (UDP) Data Toggle
1738 #define AT91C_UDP_EPEDS (0x1 << 15) // (UDP) Endpoint Enable Disable
1739 #define AT91C_UDP_RXBYTECNT (0x7FF << 16) // (UDP) Number Of Bytes Available in the FIFO
1740 // -------- UDP_TXVC : (UDP Offset: 0x74) Transceiver Control Register --------
1741 #define AT91C_UDP_TXVDIS (0x1 << 8) // (UDP)
1742
1743 // *****************************************************************************
1744 // REGISTER ADDRESS DEFINITION FOR AT91SAM7S512
1745 // *****************************************************************************
1746 // ========== Register definition for SYS peripheral ==========
1747 // ========== Register definition for AIC peripheral ==========
1748 #define AT91C_AIC_IVR (AT91_CAST(AT91_REG *) 0xFFFFF100) // (AIC) IRQ Vector Register
1749 #define AT91C_AIC_SMR (AT91_CAST(AT91_REG *) 0xFFFFF000) // (AIC) Source Mode Register
1750 #define AT91C_AIC_FVR (AT91_CAST(AT91_REG *) 0xFFFFF104) // (AIC) FIQ Vector Register
1751 #define AT91C_AIC_DCR (AT91_CAST(AT91_REG *) 0xFFFFF138) // (AIC) Debug Control Register (Protect)
1752 #define AT91C_AIC_EOICR (AT91_CAST(AT91_REG *) 0xFFFFF130) // (AIC) End of Interrupt Command Register
1753 #define AT91C_AIC_SVR (AT91_CAST(AT91_REG *) 0xFFFFF080) // (AIC) Source Vector Register
1754 #define AT91C_AIC_FFSR (AT91_CAST(AT91_REG *) 0xFFFFF148) // (AIC) Fast Forcing Status Register
1755 #define AT91C_AIC_ICCR (AT91_CAST(AT91_REG *) 0xFFFFF128) // (AIC) Interrupt Clear Command Register
1756 #define AT91C_AIC_ISR (AT91_CAST(AT91_REG *) 0xFFFFF108) // (AIC) Interrupt Status Register
1757 #define AT91C_AIC_IMR (AT91_CAST(AT91_REG *) 0xFFFFF110) // (AIC) Interrupt Mask Register
1758 #define AT91C_AIC_IPR (AT91_CAST(AT91_REG *) 0xFFFFF10C) // (AIC) Interrupt Pending Register
1759 #define AT91C_AIC_FFER (AT91_CAST(AT91_REG *) 0xFFFFF140) // (AIC) Fast Forcing Enable Register
1760 #define AT91C_AIC_IECR (AT91_CAST(AT91_REG *) 0xFFFFF120) // (AIC) Interrupt Enable Command Register
1761 #define AT91C_AIC_ISCR (AT91_CAST(AT91_REG *) 0xFFFFF12C) // (AIC) Interrupt Set Command Register
1762 #define AT91C_AIC_FFDR (AT91_CAST(AT91_REG *) 0xFFFFF144) // (AIC) Fast Forcing Disable Register
1763 #define AT91C_AIC_CISR (AT91_CAST(AT91_REG *) 0xFFFFF114) // (AIC) Core Interrupt Status Register
1764 #define AT91C_AIC_IDCR (AT91_CAST(AT91_REG *) 0xFFFFF124) // (AIC) Interrupt Disable Command Register
1765 #define AT91C_AIC_SPU (AT91_CAST(AT91_REG *) 0xFFFFF134) // (AIC) Spurious Vector Register
1766 // ========== Register definition for PDC_DBGU peripheral ==========
1767 #define AT91C_DBGU_TCR (AT91_CAST(AT91_REG *) 0xFFFFF30C) // (PDC_DBGU) Transmit Counter Register
1768 #define AT91C_DBGU_RNPR (AT91_CAST(AT91_REG *) 0xFFFFF310) // (PDC_DBGU) Receive Next Pointer Register
1769 #define AT91C_DBGU_TNPR (AT91_CAST(AT91_REG *) 0xFFFFF318) // (PDC_DBGU) Transmit Next Pointer Register
1770 #define AT91C_DBGU_TPR (AT91_CAST(AT91_REG *) 0xFFFFF308) // (PDC_DBGU) Transmit Pointer Register
1771 #define AT91C_DBGU_RPR (AT91_CAST(AT91_REG *) 0xFFFFF300) // (PDC_DBGU) Receive Pointer Register
1772 #define AT91C_DBGU_RCR (AT91_CAST(AT91_REG *) 0xFFFFF304) // (PDC_DBGU) Receive Counter Register
1773 #define AT91C_DBGU_RNCR (AT91_CAST(AT91_REG *) 0xFFFFF314) // (PDC_DBGU) Receive Next Counter Register
1774 #define AT91C_DBGU_PTCR (AT91_CAST(AT91_REG *) 0xFFFFF320) // (PDC_DBGU) PDC Transfer Control Register
1775 #define AT91C_DBGU_PTSR (AT91_CAST(AT91_REG *) 0xFFFFF324) // (PDC_DBGU) PDC Transfer Status Register
1776 #define AT91C_DBGU_TNCR (AT91_CAST(AT91_REG *) 0xFFFFF31C) // (PDC_DBGU) Transmit Next Counter Register
1777 // ========== Register definition for DBGU peripheral ==========
1778 #define AT91C_DBGU_EXID (AT91_CAST(AT91_REG *) 0xFFFFF244) // (DBGU) Chip ID Extension Register
1779 #define AT91C_DBGU_BRGR (AT91_CAST(AT91_REG *) 0xFFFFF220) // (DBGU) Baud Rate Generator Register
1780 #define AT91C_DBGU_IDR (AT91_CAST(AT91_REG *) 0xFFFFF20C) // (DBGU) Interrupt Disable Register
1781 #define AT91C_DBGU_CSR (AT91_CAST(AT91_REG *) 0xFFFFF214) // (DBGU) Channel Status Register
1782 #define AT91C_DBGU_CIDR (AT91_CAST(AT91_REG *) 0xFFFFF240) // (DBGU) Chip ID Register
1783 #define AT91C_DBGU_MR (AT91_CAST(AT91_REG *) 0xFFFFF204) // (DBGU) Mode Register
1784 #define AT91C_DBGU_IMR (AT91_CAST(AT91_REG *) 0xFFFFF210) // (DBGU) Interrupt Mask Register
1785 #define AT91C_DBGU_CR (AT91_CAST(AT91_REG *) 0xFFFFF200) // (DBGU) Control Register
1786 #define AT91C_DBGU_FNTR (AT91_CAST(AT91_REG *) 0xFFFFF248) // (DBGU) Force NTRST Register
1787 #define AT91C_DBGU_THR (AT91_CAST(AT91_REG *) 0xFFFFF21C) // (DBGU) Transmitter Holding Register
1788 #define AT91C_DBGU_RHR (AT91_CAST(AT91_REG *) 0xFFFFF218) // (DBGU) Receiver Holding Register
1789 #define AT91C_DBGU_IER (AT91_CAST(AT91_REG *) 0xFFFFF208) // (DBGU) Interrupt Enable Register
1790 // ========== Register definition for PIOA peripheral ==========
1791 #define AT91C_PIOA_ODR (AT91_CAST(AT91_REG *) 0xFFFFF414) // (PIOA) Output Disable Registerr
1792 #define AT91C_PIOA_SODR (AT91_CAST(AT91_REG *) 0xFFFFF430) // (PIOA) Set Output Data Register
1793 #define AT91C_PIOA_ISR (AT91_CAST(AT91_REG *) 0xFFFFF44C) // (PIOA) Interrupt Status Register
1794 #define AT91C_PIOA_ABSR (AT91_CAST(AT91_REG *) 0xFFFFF478) // (PIOA) AB Select Status Register
1795 #define AT91C_PIOA_IER (AT91_CAST(AT91_REG *) 0xFFFFF440) // (PIOA) Interrupt Enable Register
1796 #define AT91C_PIOA_PPUDR (AT91_CAST(AT91_REG *) 0xFFFFF460) // (PIOA) Pull-up Disable Register
1797 #define AT91C_PIOA_IMR (AT91_CAST(AT91_REG *) 0xFFFFF448) // (PIOA) Interrupt Mask Register
1798 #define AT91C_PIOA_PER (AT91_CAST(AT91_REG *) 0xFFFFF400) // (PIOA) PIO Enable Register
1799 #define AT91C_PIOA_IFDR (AT91_CAST(AT91_REG *) 0xFFFFF424) // (PIOA) Input Filter Disable Register
1800 #define AT91C_PIOA_OWDR (AT91_CAST(AT91_REG *) 0xFFFFF4A4) // (PIOA) Output Write Disable Register
1801 #define AT91C_PIOA_MDSR (AT91_CAST(AT91_REG *) 0xFFFFF458) // (PIOA) Multi-driver Status Register
1802 #define AT91C_PIOA_IDR (AT91_CAST(AT91_REG *) 0xFFFFF444) // (PIOA) Interrupt Disable Register
1803 #define AT91C_PIOA_ODSR (AT91_CAST(AT91_REG *) 0xFFFFF438) // (PIOA) Output Data Status Register
1804 #define AT91C_PIOA_PPUSR (AT91_CAST(AT91_REG *) 0xFFFFF468) // (PIOA) Pull-up Status Register
1805 #define AT91C_PIOA_OWSR (AT91_CAST(AT91_REG *) 0xFFFFF4A8) // (PIOA) Output Write Status Register
1806 #define AT91C_PIOA_BSR (AT91_CAST(AT91_REG *) 0xFFFFF474) // (PIOA) Select B Register
1807 #define AT91C_PIOA_OWER (AT91_CAST(AT91_REG *) 0xFFFFF4A0) // (PIOA) Output Write Enable Register
1808 #define AT91C_PIOA_IFER (AT91_CAST(AT91_REG *) 0xFFFFF420) // (PIOA) Input Filter Enable Register
1809 #define AT91C_PIOA_PDSR (AT91_CAST(AT91_REG *) 0xFFFFF43C) // (PIOA) Pin Data Status Register
1810 #define AT91C_PIOA_PPUER (AT91_CAST(AT91_REG *) 0xFFFFF464) // (PIOA) Pull-up Enable Register
1811 #define AT91C_PIOA_OSR (AT91_CAST(AT91_REG *) 0xFFFFF418) // (PIOA) Output Status Register
1812 #define AT91C_PIOA_ASR (AT91_CAST(AT91_REG *) 0xFFFFF470) // (PIOA) Select A Register
1813 #define AT91C_PIOA_MDDR (AT91_CAST(AT91_REG *) 0xFFFFF454) // (PIOA) Multi-driver Disable Register
1814 #define AT91C_PIOA_CODR (AT91_CAST(AT91_REG *) 0xFFFFF434) // (PIOA) Clear Output Data Register
1815 #define AT91C_PIOA_MDER (AT91_CAST(AT91_REG *) 0xFFFFF450) // (PIOA) Multi-driver Enable Register
1816 #define AT91C_PIOA_PDR (AT91_CAST(AT91_REG *) 0xFFFFF404) // (PIOA) PIO Disable Register
1817 #define AT91C_PIOA_IFSR (AT91_CAST(AT91_REG *) 0xFFFFF428) // (PIOA) Input Filter Status Register
1818 #define AT91C_PIOA_OER (AT91_CAST(AT91_REG *) 0xFFFFF410) // (PIOA) Output Enable Register
1819 #define AT91C_PIOA_PSR (AT91_CAST(AT91_REG *) 0xFFFFF408) // (PIOA) PIO Status Register
1820 // ========== Register definition for CKGR peripheral ==========
1821 #define AT91C_CKGR_MOR (AT91_CAST(AT91_REG *) 0xFFFFFC20) // (CKGR) Main Oscillator Register
1822 #define AT91C_CKGR_PLLR (AT91_CAST(AT91_REG *) 0xFFFFFC2C) // (CKGR) PLL Register
1823 #define AT91C_CKGR_MCFR (AT91_CAST(AT91_REG *) 0xFFFFFC24) // (CKGR) Main Clock Frequency Register
1824 // ========== Register definition for PMC peripheral ==========
1825 #define AT91C_PMC_IDR (AT91_CAST(AT91_REG *) 0xFFFFFC64) // (PMC) Interrupt Disable Register
1826 #define AT91C_PMC_MOR (AT91_CAST(AT91_REG *) 0xFFFFFC20) // (PMC) Main Oscillator Register
1827 #define AT91C_PMC_PLLR (AT91_CAST(AT91_REG *) 0xFFFFFC2C) // (PMC) PLL Register
1828 #define AT91C_PMC_PCER (AT91_CAST(AT91_REG *) 0xFFFFFC10) // (PMC) Peripheral Clock Enable Register
1829 #define AT91C_PMC_PCKR (AT91_CAST(AT91_REG *) 0xFFFFFC40) // (PMC) Programmable Clock Register
1830 #define AT91C_PMC_MCKR (AT91_CAST(AT91_REG *) 0xFFFFFC30) // (PMC) Master Clock Register
1831 #define AT91C_PMC_SCDR (AT91_CAST(AT91_REG *) 0xFFFFFC04) // (PMC) System Clock Disable Register
1832 #define AT91C_PMC_PCDR (AT91_CAST(AT91_REG *) 0xFFFFFC14) // (PMC) Peripheral Clock Disable Register
1833 #define AT91C_PMC_SCSR (AT91_CAST(AT91_REG *) 0xFFFFFC08) // (PMC) System Clock Status Register
1834 #define AT91C_PMC_PCSR (AT91_CAST(AT91_REG *) 0xFFFFFC18) // (PMC) Peripheral Clock Status Register
1835 #define AT91C_PMC_MCFR (AT91_CAST(AT91_REG *) 0xFFFFFC24) // (PMC) Main Clock Frequency Register
1836 #define AT91C_PMC_SCER (AT91_CAST(AT91_REG *) 0xFFFFFC00) // (PMC) System Clock Enable Register
1837 #define AT91C_PMC_IMR (AT91_CAST(AT91_REG *) 0xFFFFFC6C) // (PMC) Interrupt Mask Register
1838 #define AT91C_PMC_IER (AT91_CAST(AT91_REG *) 0xFFFFFC60) // (PMC) Interrupt Enable Register
1839 #define AT91C_PMC_SR (AT91_CAST(AT91_REG *) 0xFFFFFC68) // (PMC) Status Register
1840 // ========== Register definition for RSTC peripheral ==========
1841 #define AT91C_RSTC_RCR (AT91_CAST(AT91_REG *) 0xFFFFFD00) // (RSTC) Reset Control Register
1842 #define AT91C_RSTC_RMR (AT91_CAST(AT91_REG *) 0xFFFFFD08) // (RSTC) Reset Mode Register
1843 #define AT91C_RSTC_RSR (AT91_CAST(AT91_REG *) 0xFFFFFD04) // (RSTC) Reset Status Register
1844 // ========== Register definition for RTTC peripheral ==========
1845 #define AT91C_RTTC_RTSR (AT91_CAST(AT91_REG *) 0xFFFFFD2C) // (RTTC) Real-time Status Register
1846 #define AT91C_RTTC_RTMR (AT91_CAST(AT91_REG *) 0xFFFFFD20) // (RTTC) Real-time Mode Register
1847 #define AT91C_RTTC_RTVR (AT91_CAST(AT91_REG *) 0xFFFFFD28) // (RTTC) Real-time Value Register
1848 #define AT91C_RTTC_RTAR (AT91_CAST(AT91_REG *) 0xFFFFFD24) // (RTTC) Real-time Alarm Register
1849 // ========== Register definition for PITC peripheral ==========
1850 #define AT91C_PITC_PIVR (AT91_CAST(AT91_REG *) 0xFFFFFD38) // (PITC) Period Interval Value Register
1851 #define AT91C_PITC_PISR (AT91_CAST(AT91_REG *) 0xFFFFFD34) // (PITC) Period Interval Status Register
1852 #define AT91C_PITC_PIIR (AT91_CAST(AT91_REG *) 0xFFFFFD3C) // (PITC) Period Interval Image Register
1853 #define AT91C_PITC_PIMR (AT91_CAST(AT91_REG *) 0xFFFFFD30) // (PITC) Period Interval Mode Register
1854 // ========== Register definition for WDTC peripheral ==========
1855 #define AT91C_WDTC_WDCR (AT91_CAST(AT91_REG *) 0xFFFFFD40) // (WDTC) Watchdog Control Register
1856 #define AT91C_WDTC_WDSR (AT91_CAST(AT91_REG *) 0xFFFFFD48) // (WDTC) Watchdog Status Register
1857 #define AT91C_WDTC_WDMR (AT91_CAST(AT91_REG *) 0xFFFFFD44) // (WDTC) Watchdog Mode Register
1858 // ========== Register definition for VREG peripheral ==========
1859 #define AT91C_VREG_MR (AT91_CAST(AT91_REG *) 0xFFFFFD60) // (VREG) Voltage Regulator Mode Register
1860 // ========== Register definition for EFC0 peripheral ==========
1861 #define AT91C_EFC0_FCR (AT91_CAST(AT91_REG *) 0xFFFFFF64) // (EFC0) MC Flash Command Register
1862 #define AT91C_EFC0_FSR (AT91_CAST(AT91_REG *) 0xFFFFFF68) // (EFC0) MC Flash Status Register
1863 #define AT91C_EFC0_VR (AT91_CAST(AT91_REG *) 0xFFFFFF6C) // (EFC0) MC Flash Version Register
1864 #define AT91C_EFC0_FMR (AT91_CAST(AT91_REG *) 0xFFFFFF60) // (EFC0) MC Flash Mode Register
1865 // ========== Register definition for EFC1 peripheral ==========
1866 #define AT91C_EFC1_VR (AT91_CAST(AT91_REG *) 0xFFFFFF7C) // (EFC1) MC Flash Version Register
1867 #define AT91C_EFC1_FCR (AT91_CAST(AT91_REG *) 0xFFFFFF74) // (EFC1) MC Flash Command Register
1868 #define AT91C_EFC1_FSR (AT91_CAST(AT91_REG *) 0xFFFFFF78) // (EFC1) MC Flash Status Register
1869 #define AT91C_EFC1_FMR (AT91_CAST(AT91_REG *) 0xFFFFFF70) // (EFC1) MC Flash Mode Register
1870 // ========== Register definition for MC peripheral ==========
1871 #define AT91C_MC_ASR (AT91_CAST(AT91_REG *) 0xFFFFFF04) // (MC) MC Abort Status Register
1872 #define AT91C_MC_RCR (AT91_CAST(AT91_REG *) 0xFFFFFF00) // (MC) MC Remap Control Register
1873 #define AT91C_MC_PUP (AT91_CAST(AT91_REG *) 0xFFFFFF50) // (MC) MC Protection Unit Peripherals
1874 #define AT91C_MC_PUIA (AT91_CAST(AT91_REG *) 0xFFFFFF10) // (MC) MC Protection Unit Area
1875 #define AT91C_MC_AASR (AT91_CAST(AT91_REG *) 0xFFFFFF08) // (MC) MC Abort Address Status Register
1876 #define AT91C_MC_PUER (AT91_CAST(AT91_REG *) 0xFFFFFF54) // (MC) MC Protection Unit Enable Register
1877 // ========== Register definition for PDC_SPI peripheral ==========
1878 #define AT91C_SPI_PTCR (AT91_CAST(AT91_REG *) 0xFFFE0120) // (PDC_SPI) PDC Transfer Control Register
1879 #define AT91C_SPI_TPR (AT91_CAST(AT91_REG *) 0xFFFE0108) // (PDC_SPI) Transmit Pointer Register
1880 #define AT91C_SPI_TCR (AT91_CAST(AT91_REG *) 0xFFFE010C) // (PDC_SPI) Transmit Counter Register
1881 #define AT91C_SPI_RCR (AT91_CAST(AT91_REG *) 0xFFFE0104) // (PDC_SPI) Receive Counter Register
1882 #define AT91C_SPI_PTSR (AT91_CAST(AT91_REG *) 0xFFFE0124) // (PDC_SPI) PDC Transfer Status Register
1883 #define AT91C_SPI_RNPR (AT91_CAST(AT91_REG *) 0xFFFE0110) // (PDC_SPI) Receive Next Pointer Register
1884 #define AT91C_SPI_RPR (AT91_CAST(AT91_REG *) 0xFFFE0100) // (PDC_SPI) Receive Pointer Register
1885 #define AT91C_SPI_TNCR (AT91_CAST(AT91_REG *) 0xFFFE011C) // (PDC_SPI) Transmit Next Counter Register
1886 #define AT91C_SPI_RNCR (AT91_CAST(AT91_REG *) 0xFFFE0114) // (PDC_SPI) Receive Next Counter Register
1887 #define AT91C_SPI_TNPR (AT91_CAST(AT91_REG *) 0xFFFE0118) // (PDC_SPI) Transmit Next Pointer Register
1888 // ========== Register definition for SPI peripheral ==========
1889 #define AT91C_SPI_IER (AT91_CAST(AT91_REG *) 0xFFFE0014) // (SPI) Interrupt Enable Register
1890 #define AT91C_SPI_SR (AT91_CAST(AT91_REG *) 0xFFFE0010) // (SPI) Status Register
1891 #define AT91C_SPI_IDR (AT91_CAST(AT91_REG *) 0xFFFE0018) // (SPI) Interrupt Disable Register
1892 #define AT91C_SPI_CR (AT91_CAST(AT91_REG *) 0xFFFE0000) // (SPI) Control Register
1893 #define AT91C_SPI_MR (AT91_CAST(AT91_REG *) 0xFFFE0004) // (SPI) Mode Register
1894 #define AT91C_SPI_IMR (AT91_CAST(AT91_REG *) 0xFFFE001C) // (SPI) Interrupt Mask Register
1895 #define AT91C_SPI_TDR (AT91_CAST(AT91_REG *) 0xFFFE000C) // (SPI) Transmit Data Register
1896 #define AT91C_SPI_RDR (AT91_CAST(AT91_REG *) 0xFFFE0008) // (SPI) Receive Data Register
1897 #define AT91C_SPI_CSR (AT91_CAST(AT91_REG *) 0xFFFE0030) // (SPI) Chip Select Register
1898 // ========== Register definition for PDC_ADC peripheral ==========
1899 #define AT91C_ADC_PTSR (AT91_CAST(AT91_REG *) 0xFFFD8124) // (PDC_ADC) PDC Transfer Status Register
1900 #define AT91C_ADC_PTCR (AT91_CAST(AT91_REG *) 0xFFFD8120) // (PDC_ADC) PDC Transfer Control Register
1901 #define AT91C_ADC_TNPR (AT91_CAST(AT91_REG *) 0xFFFD8118) // (PDC_ADC) Transmit Next Pointer Register
1902 #define AT91C_ADC_TNCR (AT91_CAST(AT91_REG *) 0xFFFD811C) // (PDC_ADC) Transmit Next Counter Register
1903 #define AT91C_ADC_RNPR (AT91_CAST(AT91_REG *) 0xFFFD8110) // (PDC_ADC) Receive Next Pointer Register
1904 #define AT91C_ADC_RNCR (AT91_CAST(AT91_REG *) 0xFFFD8114) // (PDC_ADC) Receive Next Counter Register
1905 #define AT91C_ADC_RPR (AT91_CAST(AT91_REG *) 0xFFFD8100) // (PDC_ADC) Receive Pointer Register
1906 #define AT91C_ADC_TCR (AT91_CAST(AT91_REG *) 0xFFFD810C) // (PDC_ADC) Transmit Counter Register
1907 #define AT91C_ADC_TPR (AT91_CAST(AT91_REG *) 0xFFFD8108) // (PDC_ADC) Transmit Pointer Register
1908 #define AT91C_ADC_RCR (AT91_CAST(AT91_REG *) 0xFFFD8104) // (PDC_ADC) Receive Counter Register
1909 // ========== Register definition for ADC peripheral ==========
1910 #define AT91C_ADC_CDR2 (AT91_CAST(AT91_REG *) 0xFFFD8038) // (ADC) ADC Channel Data Register 2
1911 #define AT91C_ADC_CDR3 (AT91_CAST(AT91_REG *) 0xFFFD803C) // (ADC) ADC Channel Data Register 3
1912 #define AT91C_ADC_CDR0 (AT91_CAST(AT91_REG *) 0xFFFD8030) // (ADC) ADC Channel Data Register 0
1913 #define AT91C_ADC_CDR5 (AT91_CAST(AT91_REG *) 0xFFFD8044) // (ADC) ADC Channel Data Register 5
1914 #define AT91C_ADC_CHDR (AT91_CAST(AT91_REG *) 0xFFFD8014) // (ADC) ADC Channel Disable Register
1915 #define AT91C_ADC_SR (AT91_CAST(AT91_REG *) 0xFFFD801C) // (ADC) ADC Status Register
1916 #define AT91C_ADC_CDR4 (AT91_CAST(AT91_REG *) 0xFFFD8040) // (ADC) ADC Channel Data Register 4
1917 #define AT91C_ADC_CDR1 (AT91_CAST(AT91_REG *) 0xFFFD8034) // (ADC) ADC Channel Data Register 1
1918 #define AT91C_ADC_LCDR (AT91_CAST(AT91_REG *) 0xFFFD8020) // (ADC) ADC Last Converted Data Register
1919 #define AT91C_ADC_IDR (AT91_CAST(AT91_REG *) 0xFFFD8028) // (ADC) ADC Interrupt Disable Register
1920 #define AT91C_ADC_CR (AT91_CAST(AT91_REG *) 0xFFFD8000) // (ADC) ADC Control Register
1921 #define AT91C_ADC_CDR7 (AT91_CAST(AT91_REG *) 0xFFFD804C) // (ADC) ADC Channel Data Register 7
1922 #define AT91C_ADC_CDR6 (AT91_CAST(AT91_REG *) 0xFFFD8048) // (ADC) ADC Channel Data Register 6
1923 #define AT91C_ADC_IER (AT91_CAST(AT91_REG *) 0xFFFD8024) // (ADC) ADC Interrupt Enable Register
1924 #define AT91C_ADC_CHER (AT91_CAST(AT91_REG *) 0xFFFD8010) // (ADC) ADC Channel Enable Register
1925 #define AT91C_ADC_CHSR (AT91_CAST(AT91_REG *) 0xFFFD8018) // (ADC) ADC Channel Status Register
1926 #define AT91C_ADC_MR (AT91_CAST(AT91_REG *) 0xFFFD8004) // (ADC) ADC Mode Register
1927 #define AT91C_ADC_IMR (AT91_CAST(AT91_REG *) 0xFFFD802C) // (ADC) ADC Interrupt Mask Register
1928 // ========== Register definition for PDC_SSC peripheral ==========
1929 #define AT91C_SSC_TNCR (AT91_CAST(AT91_REG *) 0xFFFD411C) // (PDC_SSC) Transmit Next Counter Register
1930 #define AT91C_SSC_RPR (AT91_CAST(AT91_REG *) 0xFFFD4100) // (PDC_SSC) Receive Pointer Register
1931 #define AT91C_SSC_RNCR (AT91_CAST(AT91_REG *) 0xFFFD4114) // (PDC_SSC) Receive Next Counter Register
1932 #define AT91C_SSC_TPR (AT91_CAST(AT91_REG *) 0xFFFD4108) // (PDC_SSC) Transmit Pointer Register
1933 #define AT91C_SSC_PTCR (AT91_CAST(AT91_REG *) 0xFFFD4120) // (PDC_SSC) PDC Transfer Control Register
1934 #define AT91C_SSC_TCR (AT91_CAST(AT91_REG *) 0xFFFD410C) // (PDC_SSC) Transmit Counter Register
1935 #define AT91C_SSC_RCR (AT91_CAST(AT91_REG *) 0xFFFD4104) // (PDC_SSC) Receive Counter Register
1936 #define AT91C_SSC_RNPR (AT91_CAST(AT91_REG *) 0xFFFD4110) // (PDC_SSC) Receive Next Pointer Register
1937 #define AT91C_SSC_TNPR (AT91_CAST(AT91_REG *) 0xFFFD4118) // (PDC_SSC) Transmit Next Pointer Register
1938 #define AT91C_SSC_PTSR (AT91_CAST(AT91_REG *) 0xFFFD4124) // (PDC_SSC) PDC Transfer Status Register
1939 // ========== Register definition for SSC peripheral ==========
1940 #define AT91C_SSC_RHR (AT91_CAST(AT91_REG *) 0xFFFD4020) // (SSC) Receive Holding Register
1941 #define AT91C_SSC_RSHR (AT91_CAST(AT91_REG *) 0xFFFD4030) // (SSC) Receive Sync Holding Register
1942 #define AT91C_SSC_TFMR (AT91_CAST(AT91_REG *) 0xFFFD401C) // (SSC) Transmit Frame Mode Register
1943 #define AT91C_SSC_IDR (AT91_CAST(AT91_REG *) 0xFFFD4048) // (SSC) Interrupt Disable Register
1944 #define AT91C_SSC_THR (AT91_CAST(AT91_REG *) 0xFFFD4024) // (SSC) Transmit Holding Register
1945 #define AT91C_SSC_RCMR (AT91_CAST(AT91_REG *) 0xFFFD4010) // (SSC) Receive Clock ModeRegister
1946 #define AT91C_SSC_IER (AT91_CAST(AT91_REG *) 0xFFFD4044) // (SSC) Interrupt Enable Register
1947 #define AT91C_SSC_TSHR (AT91_CAST(AT91_REG *) 0xFFFD4034) // (SSC) Transmit Sync Holding Register
1948 #define AT91C_SSC_SR (AT91_CAST(AT91_REG *) 0xFFFD4040) // (SSC) Status Register
1949 #define AT91C_SSC_CMR (AT91_CAST(AT91_REG *) 0xFFFD4004) // (SSC) Clock Mode Register
1950 #define AT91C_SSC_TCMR (AT91_CAST(AT91_REG *) 0xFFFD4018) // (SSC) Transmit Clock Mode Register
1951 #define AT91C_SSC_CR (AT91_CAST(AT91_REG *) 0xFFFD4000) // (SSC) Control Register
1952 #define AT91C_SSC_IMR (AT91_CAST(AT91_REG *) 0xFFFD404C) // (SSC) Interrupt Mask Register
1953 #define AT91C_SSC_RFMR (AT91_CAST(AT91_REG *) 0xFFFD4014) // (SSC) Receive Frame Mode Register
1954 // ========== Register definition for PDC_US1 peripheral ==========
1955 #define AT91C_US1_RNCR (AT91_CAST(AT91_REG *) 0xFFFC4114) // (PDC_US1) Receive Next Counter Register
1956 #define AT91C_US1_PTCR (AT91_CAST(AT91_REG *) 0xFFFC4120) // (PDC_US1) PDC Transfer Control Register
1957 #define AT91C_US1_TCR (AT91_CAST(AT91_REG *) 0xFFFC410C) // (PDC_US1) Transmit Counter Register
1958 #define AT91C_US1_PTSR (AT91_CAST(AT91_REG *) 0xFFFC4124) // (PDC_US1) PDC Transfer Status Register
1959 #define AT91C_US1_TNPR (AT91_CAST(AT91_REG *) 0xFFFC4118) // (PDC_US1) Transmit Next Pointer Register
1960 #define AT91C_US1_RCR (AT91_CAST(AT91_REG *) 0xFFFC4104) // (PDC_US1) Receive Counter Register
1961 #define AT91C_US1_RNPR (AT91_CAST(AT91_REG *) 0xFFFC4110) // (PDC_US1) Receive Next Pointer Register
1962 #define AT91C_US1_RPR (AT91_CAST(AT91_REG *) 0xFFFC4100) // (PDC_US1) Receive Pointer Register
1963 #define AT91C_US1_TNCR (AT91_CAST(AT91_REG *) 0xFFFC411C) // (PDC_US1) Transmit Next Counter Register
1964 #define AT91C_US1_TPR (AT91_CAST(AT91_REG *) 0xFFFC4108) // (PDC_US1) Transmit Pointer Register
1965 // ========== Register definition for US1 peripheral ==========
1966 #define AT91C_US1_IF (AT91_CAST(AT91_REG *) 0xFFFC404C) // (US1) IRDA_FILTER Register
1967 #define AT91C_US1_NER (AT91_CAST(AT91_REG *) 0xFFFC4044) // (US1) Nb Errors Register
1968 #define AT91C_US1_RTOR (AT91_CAST(AT91_REG *) 0xFFFC4024) // (US1) Receiver Time-out Register
1969 #define AT91C_US1_CSR (AT91_CAST(AT91_REG *) 0xFFFC4014) // (US1) Channel Status Register
1970 #define AT91C_US1_IDR (AT91_CAST(AT91_REG *) 0xFFFC400C) // (US1) Interrupt Disable Register
1971 #define AT91C_US1_IER (AT91_CAST(AT91_REG *) 0xFFFC4008) // (US1) Interrupt Enable Register
1972 #define AT91C_US1_THR (AT91_CAST(AT91_REG *) 0xFFFC401C) // (US1) Transmitter Holding Register
1973 #define AT91C_US1_TTGR (AT91_CAST(AT91_REG *) 0xFFFC4028) // (US1) Transmitter Time-guard Register
1974 #define AT91C_US1_RHR (AT91_CAST(AT91_REG *) 0xFFFC4018) // (US1) Receiver Holding Register
1975 #define AT91C_US1_BRGR (AT91_CAST(AT91_REG *) 0xFFFC4020) // (US1) Baud Rate Generator Register
1976 #define AT91C_US1_IMR (AT91_CAST(AT91_REG *) 0xFFFC4010) // (US1) Interrupt Mask Register
1977 #define AT91C_US1_FIDI (AT91_CAST(AT91_REG *) 0xFFFC4040) // (US1) FI_DI_Ratio Register
1978 #define AT91C_US1_CR (AT91_CAST(AT91_REG *) 0xFFFC4000) // (US1) Control Register
1979 #define AT91C_US1_MR (AT91_CAST(AT91_REG *) 0xFFFC4004) // (US1) Mode Register
1980 // ========== Register definition for PDC_US0 peripheral ==========
1981 #define AT91C_US0_TNPR (AT91_CAST(AT91_REG *) 0xFFFC0118) // (PDC_US0) Transmit Next Pointer Register
1982 #define AT91C_US0_RNPR (AT91_CAST(AT91_REG *) 0xFFFC0110) // (PDC_US0) Receive Next Pointer Register
1983 #define AT91C_US0_TCR (AT91_CAST(AT91_REG *) 0xFFFC010C) // (PDC_US0) Transmit Counter Register
1984 #define AT91C_US0_PTCR (AT91_CAST(AT91_REG *) 0xFFFC0120) // (PDC_US0) PDC Transfer Control Register
1985 #define AT91C_US0_PTSR (AT91_CAST(AT91_REG *) 0xFFFC0124) // (PDC_US0) PDC Transfer Status Register
1986 #define AT91C_US0_TNCR (AT91_CAST(AT91_REG *) 0xFFFC011C) // (PDC_US0) Transmit Next Counter Register
1987 #define AT91C_US0_TPR (AT91_CAST(AT91_REG *) 0xFFFC0108) // (PDC_US0) Transmit Pointer Register
1988 #define AT91C_US0_RCR (AT91_CAST(AT91_REG *) 0xFFFC0104) // (PDC_US0) Receive Counter Register
1989 #define AT91C_US0_RPR (AT91_CAST(AT91_REG *) 0xFFFC0100) // (PDC_US0) Receive Pointer Register
1990 #define AT91C_US0_RNCR (AT91_CAST(AT91_REG *) 0xFFFC0114) // (PDC_US0) Receive Next Counter Register
1991 // ========== Register definition for US0 peripheral ==========
1992 #define AT91C_US0_BRGR (AT91_CAST(AT91_REG *) 0xFFFC0020) // (US0) Baud Rate Generator Register
1993 #define AT91C_US0_NER (AT91_CAST(AT91_REG *) 0xFFFC0044) // (US0) Nb Errors Register
1994 #define AT91C_US0_CR (AT91_CAST(AT91_REG *) 0xFFFC0000) // (US0) Control Register
1995 #define AT91C_US0_IMR (AT91_CAST(AT91_REG *) 0xFFFC0010) // (US0) Interrupt Mask Register
1996 #define AT91C_US0_FIDI (AT91_CAST(AT91_REG *) 0xFFFC0040) // (US0) FI_DI_Ratio Register
1997 #define AT91C_US0_TTGR (AT91_CAST(AT91_REG *) 0xFFFC0028) // (US0) Transmitter Time-guard Register
1998 #define AT91C_US0_MR (AT91_CAST(AT91_REG *) 0xFFFC0004) // (US0) Mode Register
1999 #define AT91C_US0_RTOR (AT91_CAST(AT91_REG *) 0xFFFC0024) // (US0) Receiver Time-out Register
2000 #define AT91C_US0_CSR (AT91_CAST(AT91_REG *) 0xFFFC0014) // (US0) Channel Status Register
2001 #define AT91C_US0_RHR (AT91_CAST(AT91_REG *) 0xFFFC0018) // (US0) Receiver Holding Register
2002 #define AT91C_US0_IDR (AT91_CAST(AT91_REG *) 0xFFFC000C) // (US0) Interrupt Disable Register
2003 #define AT91C_US0_THR (AT91_CAST(AT91_REG *) 0xFFFC001C) // (US0) Transmitter Holding Register
2004 #define AT91C_US0_IF (AT91_CAST(AT91_REG *) 0xFFFC004C) // (US0) IRDA_FILTER Register
2005 #define AT91C_US0_IER (AT91_CAST(AT91_REG *) 0xFFFC0008) // (US0) Interrupt Enable Register
2006 // ========== Register definition for TWI peripheral ==========
2007 #define AT91C_TWI_IER (AT91_CAST(AT91_REG *) 0xFFFB8024) // (TWI) Interrupt Enable Register
2008 #define AT91C_TWI_CR (AT91_CAST(AT91_REG *) 0xFFFB8000) // (TWI) Control Register
2009 #define AT91C_TWI_SR (AT91_CAST(AT91_REG *) 0xFFFB8020) // (TWI) Status Register
2010 #define AT91C_TWI_IMR (AT91_CAST(AT91_REG *) 0xFFFB802C) // (TWI) Interrupt Mask Register
2011 #define AT91C_TWI_THR (AT91_CAST(AT91_REG *) 0xFFFB8034) // (TWI) Transmit Holding Register
2012 #define AT91C_TWI_IDR (AT91_CAST(AT91_REG *) 0xFFFB8028) // (TWI) Interrupt Disable Register
2013 #define AT91C_TWI_IADR (AT91_CAST(AT91_REG *) 0xFFFB800C) // (TWI) Internal Address Register
2014 #define AT91C_TWI_MMR (AT91_CAST(AT91_REG *) 0xFFFB8004) // (TWI) Master Mode Register
2015 #define AT91C_TWI_CWGR (AT91_CAST(AT91_REG *) 0xFFFB8010) // (TWI) Clock Waveform Generator Register
2016 #define AT91C_TWI_RHR (AT91_CAST(AT91_REG *) 0xFFFB8030) // (TWI) Receive Holding Register
2017 // ========== Register definition for TC0 peripheral ==========
2018 #define AT91C_TC0_SR (AT91_CAST(AT91_REG *) 0xFFFA0020) // (TC0) Status Register
2019 #define AT91C_TC0_RC (AT91_CAST(AT91_REG *) 0xFFFA001C) // (TC0) Register C
2020 #define AT91C_TC0_RB (AT91_CAST(AT91_REG *) 0xFFFA0018) // (TC0) Register B
2021 #define AT91C_TC0_CCR (AT91_CAST(AT91_REG *) 0xFFFA0000) // (TC0) Channel Control Register
2022 #define AT91C_TC0_CMR (AT91_CAST(AT91_REG *) 0xFFFA0004) // (TC0) Channel Mode Register (Capture Mode / Waveform Mode)
2023 #define AT91C_TC0_IER (AT91_CAST(AT91_REG *) 0xFFFA0024) // (TC0) Interrupt Enable Register
2024 #define AT91C_TC0_RA (AT91_CAST(AT91_REG *) 0xFFFA0014) // (TC0) Register A
2025 #define AT91C_TC0_IDR (AT91_CAST(AT91_REG *) 0xFFFA0028) // (TC0) Interrupt Disable Register
2026 #define AT91C_TC0_CV (AT91_CAST(AT91_REG *) 0xFFFA0010) // (TC0) Counter Value
2027 #define AT91C_TC0_IMR (AT91_CAST(AT91_REG *) 0xFFFA002C) // (TC0) Interrupt Mask Register
2028 // ========== Register definition for TC1 peripheral ==========
2029 #define AT91C_TC1_RB (AT91_CAST(AT91_REG *) 0xFFFA0058) // (TC1) Register B
2030 #define AT91C_TC1_CCR (AT91_CAST(AT91_REG *) 0xFFFA0040) // (TC1) Channel Control Register
2031 #define AT91C_TC1_IER (AT91_CAST(AT91_REG *) 0xFFFA0064) // (TC1) Interrupt Enable Register
2032 #define AT91C_TC1_IDR (AT91_CAST(AT91_REG *) 0xFFFA0068) // (TC1) Interrupt Disable Register
2033 #define AT91C_TC1_SR (AT91_CAST(AT91_REG *) 0xFFFA0060) // (TC1) Status Register
2034 #define AT91C_TC1_CMR (AT91_CAST(AT91_REG *) 0xFFFA0044) // (TC1) Channel Mode Register (Capture Mode / Waveform Mode)
2035 #define AT91C_TC1_RA (AT91_CAST(AT91_REG *) 0xFFFA0054) // (TC1) Register A
2036 #define AT91C_TC1_RC (AT91_CAST(AT91_REG *) 0xFFFA005C) // (TC1) Register C
2037 #define AT91C_TC1_IMR (AT91_CAST(AT91_REG *) 0xFFFA006C) // (TC1) Interrupt Mask Register
2038 #define AT91C_TC1_CV (AT91_CAST(AT91_REG *) 0xFFFA0050) // (TC1) Counter Value
2039 // ========== Register definition for TC2 peripheral ==========
2040 #define AT91C_TC2_CMR (AT91_CAST(AT91_REG *) 0xFFFA0084) // (TC2) Channel Mode Register (Capture Mode / Waveform Mode)
2041 #define AT91C_TC2_CCR (AT91_CAST(AT91_REG *) 0xFFFA0080) // (TC2) Channel Control Register
2042 #define AT91C_TC2_CV (AT91_CAST(AT91_REG *) 0xFFFA0090) // (TC2) Counter Value
2043 #define AT91C_TC2_RA (AT91_CAST(AT91_REG *) 0xFFFA0094) // (TC2) Register A
2044 #define AT91C_TC2_RB (AT91_CAST(AT91_REG *) 0xFFFA0098) // (TC2) Register B
2045 #define AT91C_TC2_IDR (AT91_CAST(AT91_REG *) 0xFFFA00A8) // (TC2) Interrupt Disable Register
2046 #define AT91C_TC2_IMR (AT91_CAST(AT91_REG *) 0xFFFA00AC) // (TC2) Interrupt Mask Register
2047 #define AT91C_TC2_RC (AT91_CAST(AT91_REG *) 0xFFFA009C) // (TC2) Register C
2048 #define AT91C_TC2_IER (AT91_CAST(AT91_REG *) 0xFFFA00A4) // (TC2) Interrupt Enable Register
2049 #define AT91C_TC2_SR (AT91_CAST(AT91_REG *) 0xFFFA00A0) // (TC2) Status Register
2050 // ========== Register definition for TCB peripheral ==========
2051 #define AT91C_TCB_BMR (AT91_CAST(AT91_REG *) 0xFFFA00C4) // (TCB) TC Block Mode Register
2052 #define AT91C_TCB_BCR (AT91_CAST(AT91_REG *) 0xFFFA00C0) // (TCB) TC Block Control Register
2053 // ========== Register definition for PWMC_CH3 peripheral ==========
2054 #define AT91C_PWMC_CH3_CUPDR (AT91_CAST(AT91_REG *) 0xFFFCC270) // (PWMC_CH3) Channel Update Register
2055 #define AT91C_PWMC_CH3_Reserved (AT91_CAST(AT91_REG *) 0xFFFCC274) // (PWMC_CH3) Reserved
2056 #define AT91C_PWMC_CH3_CPRDR (AT91_CAST(AT91_REG *) 0xFFFCC268) // (PWMC_CH3) Channel Period Register
2057 #define AT91C_PWMC_CH3_CDTYR (AT91_CAST(AT91_REG *) 0xFFFCC264) // (PWMC_CH3) Channel Duty Cycle Register
2058 #define AT91C_PWMC_CH3_CCNTR (AT91_CAST(AT91_REG *) 0xFFFCC26C) // (PWMC_CH3) Channel Counter Register
2059 #define AT91C_PWMC_CH3_CMR (AT91_CAST(AT91_REG *) 0xFFFCC260) // (PWMC_CH3) Channel Mode Register
2060 // ========== Register definition for PWMC_CH2 peripheral ==========
2061 #define AT91C_PWMC_CH2_Reserved (AT91_CAST(AT91_REG *) 0xFFFCC254) // (PWMC_CH2) Reserved
2062 #define AT91C_PWMC_CH2_CMR (AT91_CAST(AT91_REG *) 0xFFFCC240) // (PWMC_CH2) Channel Mode Register
2063 #define AT91C_PWMC_CH2_CCNTR (AT91_CAST(AT91_REG *) 0xFFFCC24C) // (PWMC_CH2) Channel Counter Register
2064 #define AT91C_PWMC_CH2_CPRDR (AT91_CAST(AT91_REG *) 0xFFFCC248) // (PWMC_CH2) Channel Period Register
2065 #define AT91C_PWMC_CH2_CUPDR (AT91_CAST(AT91_REG *) 0xFFFCC250) // (PWMC_CH2) Channel Update Register
2066 #define AT91C_PWMC_CH2_CDTYR (AT91_CAST(AT91_REG *) 0xFFFCC244) // (PWMC_CH2) Channel Duty Cycle Register
2067 // ========== Register definition for PWMC_CH1 peripheral ==========
2068 #define AT91C_PWMC_CH1_Reserved (AT91_CAST(AT91_REG *) 0xFFFCC234) // (PWMC_CH1) Reserved
2069 #define AT91C_PWMC_CH1_CUPDR (AT91_CAST(AT91_REG *) 0xFFFCC230) // (PWMC_CH1) Channel Update Register
2070 #define AT91C_PWMC_CH1_CPRDR (AT91_CAST(AT91_REG *) 0xFFFCC228) // (PWMC_CH1) Channel Period Register
2071 #define AT91C_PWMC_CH1_CCNTR (AT91_CAST(AT91_REG *) 0xFFFCC22C) // (PWMC_CH1) Channel Counter Register
2072 #define AT91C_PWMC_CH1_CDTYR (AT91_CAST(AT91_REG *) 0xFFFCC224) // (PWMC_CH1) Channel Duty Cycle Register
2073 #define AT91C_PWMC_CH1_CMR (AT91_CAST(AT91_REG *) 0xFFFCC220) // (PWMC_CH1) Channel Mode Register
2074 // ========== Register definition for PWMC_CH0 peripheral ==========
2075 #define AT91C_PWMC_CH0_Reserved (AT91_CAST(AT91_REG *) 0xFFFCC214) // (PWMC_CH0) Reserved
2076 #define AT91C_PWMC_CH0_CPRDR (AT91_CAST(AT91_REG *) 0xFFFCC208) // (PWMC_CH0) Channel Period Register
2077 #define AT91C_PWMC_CH0_CDTYR (AT91_CAST(AT91_REG *) 0xFFFCC204) // (PWMC_CH0) Channel Duty Cycle Register
2078 #define AT91C_PWMC_CH0_CMR (AT91_CAST(AT91_REG *) 0xFFFCC200) // (PWMC_CH0) Channel Mode Register
2079 #define AT91C_PWMC_CH0_CUPDR (AT91_CAST(AT91_REG *) 0xFFFCC210) // (PWMC_CH0) Channel Update Register
2080 #define AT91C_PWMC_CH0_CCNTR (AT91_CAST(AT91_REG *) 0xFFFCC20C) // (PWMC_CH0) Channel Counter Register
2081 // ========== Register definition for PWMC peripheral ==========
2082 #define AT91C_PWMC_IDR (AT91_CAST(AT91_REG *) 0xFFFCC014) // (PWMC) PWMC Interrupt Disable Register
2083 #define AT91C_PWMC_DIS (AT91_CAST(AT91_REG *) 0xFFFCC008) // (PWMC) PWMC Disable Register
2084 #define AT91C_PWMC_IER (AT91_CAST(AT91_REG *) 0xFFFCC010) // (PWMC) PWMC Interrupt Enable Register
2085 #define AT91C_PWMC_VR (AT91_CAST(AT91_REG *) 0xFFFCC0FC) // (PWMC) PWMC Version Register
2086 #define AT91C_PWMC_ISR (AT91_CAST(AT91_REG *) 0xFFFCC01C) // (PWMC) PWMC Interrupt Status Register
2087 #define AT91C_PWMC_SR (AT91_CAST(AT91_REG *) 0xFFFCC00C) // (PWMC) PWMC Status Register
2088 #define AT91C_PWMC_IMR (AT91_CAST(AT91_REG *) 0xFFFCC018) // (PWMC) PWMC Interrupt Mask Register
2089 #define AT91C_PWMC_MR (AT91_CAST(AT91_REG *) 0xFFFCC000) // (PWMC) PWMC Mode Register
2090 #define AT91C_PWMC_ENA (AT91_CAST(AT91_REG *) 0xFFFCC004) // (PWMC) PWMC Enable Register
2091 // ========== Register definition for UDP peripheral ==========
2092 #define AT91C_UDP_IMR (AT91_CAST(AT91_REG *) 0xFFFB0018) // (UDP) Interrupt Mask Register
2093 #define AT91C_UDP_FADDR (AT91_CAST(AT91_REG *) 0xFFFB0008) // (UDP) Function Address Register
2094 #define AT91C_UDP_NUM (AT91_CAST(AT91_REG *) 0xFFFB0000) // (UDP) Frame Number Register
2095 #define AT91C_UDP_FDR (AT91_CAST(AT91_REG *) 0xFFFB0050) // (UDP) Endpoint FIFO Data Register
2096 #define AT91C_UDP_ISR (AT91_CAST(AT91_REG *) 0xFFFB001C) // (UDP) Interrupt Status Register
2097 #define AT91C_UDP_CSR (AT91_CAST(AT91_REG *) 0xFFFB0030) // (UDP) Endpoint Control and Status Register
2098 #define AT91C_UDP_IDR (AT91_CAST(AT91_REG *) 0xFFFB0014) // (UDP) Interrupt Disable Register
2099 #define AT91C_UDP_ICR (AT91_CAST(AT91_REG *) 0xFFFB0020) // (UDP) Interrupt Clear Register
2100 #define AT91C_UDP_RSTEP (AT91_CAST(AT91_REG *) 0xFFFB0028) // (UDP) Reset Endpoint Register
2101 #define AT91C_UDP_TXVC (AT91_CAST(AT91_REG *) 0xFFFB0074) // (UDP) Transceiver Control Register
2102 #define AT91C_UDP_GLBSTATE (AT91_CAST(AT91_REG *) 0xFFFB0004) // (UDP) Global State Register
2103 #define AT91C_UDP_IER (AT91_CAST(AT91_REG *) 0xFFFB0010) // (UDP) Interrupt Enable Register
2104
2105 // *****************************************************************************
2106 // PIO DEFINITIONS FOR AT91SAM7S512
2107 // *****************************************************************************
2108 #define AT91C_PIO_PA0 (1 << 0) // Pin Controlled by PA0
2109 #define AT91C_PA0_PWM0 (AT91C_PIO_PA0) // PWM Channel 0
2110 #define AT91C_PA0_TIOA0 (AT91C_PIO_PA0) // Timer Counter 0 Multipurpose Timer I/O Pin A
2111 #define AT91C_PIO_PA1 (1 << 1) // Pin Controlled by PA1
2112 #define AT91C_PA1_PWM1 (AT91C_PIO_PA1) // PWM Channel 1
2113 #define AT91C_PA1_TIOB0 (AT91C_PIO_PA1) // Timer Counter 0 Multipurpose Timer I/O Pin B
2114 #define AT91C_PIO_PA2 (1 << 2) // Pin Controlled by PA2
2115 #define AT91C_PA2_PWM2 (AT91C_PIO_PA2) // PWM Channel 2
2116 #define AT91C_PA2_SCK0 (AT91C_PIO_PA2) // USART 0 Serial Clock
2117 #define AT91C_PIO_PA3 (1 << 3) // Pin Controlled by PA3
2118 #define AT91C_PA3_TWD (AT91C_PIO_PA3) // TWI Two-wire Serial Data
2119 #define AT91C_PA3_NPCS3 (AT91C_PIO_PA3) // SPI Peripheral Chip Select 3
2120 #define AT91C_PIO_PA4 (1 << 4) // Pin Controlled by PA4
2121 #define AT91C_PA4_TWCK (AT91C_PIO_PA4) // TWI Two-wire Serial Clock
2122 #define AT91C_PA4_TCLK0 (AT91C_PIO_PA4) // Timer Counter 0 external clock input
2123 #define AT91C_PIO_PA5 (1 << 5) // Pin Controlled by PA5
2124 #define AT91C_PA5_RXD0 (AT91C_PIO_PA5) // USART 0 Receive Data
2125 #define AT91C_PA5_NPCS3 (AT91C_PIO_PA5) // SPI Peripheral Chip Select 3
2126 #define AT91C_PIO_PA6 (1 << 6) // Pin Controlled by PA6
2127 #define AT91C_PA6_TXD0 (AT91C_PIO_PA6) // USART 0 Transmit Data
2128 #define AT91C_PA6_PCK0 (AT91C_PIO_PA6) // PMC Programmable Clock Output 0
2129 #define AT91C_PIO_PA7 (1 << 7) // Pin Controlled by PA7
2130 #define AT91C_PA7_RTS0 (AT91C_PIO_PA7) // USART 0 Ready To Send
2131 #define AT91C_PA7_PWM3 (AT91C_PIO_PA7) // PWM Channel 3
2132 #define AT91C_PIO_PA8 (1 << 8) // Pin Controlled by PA8
2133 #define AT91C_PA8_CTS0 (AT91C_PIO_PA8) // USART 0 Clear To Send
2134 #define AT91C_PA8_ADTRG (AT91C_PIO_PA8) // ADC External Trigger
2135 #define AT91C_PIO_PA9 (1 << 9) // Pin Controlled by PA9
2136 #define AT91C_PA9_DRXD (AT91C_PIO_PA9) // DBGU Debug Receive Data
2137 #define AT91C_PA9_NPCS1 (AT91C_PIO_PA9) // SPI Peripheral Chip Select 1
2138 #define AT91C_PIO_PA10 (1 << 10) // Pin Controlled by PA10
2139 #define AT91C_PA10_DTXD (AT91C_PIO_PA10) // DBGU Debug Transmit Data
2140 #define AT91C_PA10_NPCS2 (AT91C_PIO_PA10) // SPI Peripheral Chip Select 2
2141 #define AT91C_PIO_PA11 (1 << 11) // Pin Controlled by PA11
2142 #define AT91C_PA11_NPCS0 (AT91C_PIO_PA11) // SPI Peripheral Chip Select 0
2143 #define AT91C_PA11_PWM0 (AT91C_PIO_PA11) // PWM Channel 0
2144 #define AT91C_PIO_PA12 (1 << 12) // Pin Controlled by PA12
2145 #define AT91C_PA12_MISO (AT91C_PIO_PA12) // SPI Master In Slave
2146 #define AT91C_PA12_PWM1 (AT91C_PIO_PA12) // PWM Channel 1
2147 #define AT91C_PIO_PA13 (1 << 13) // Pin Controlled by PA13
2148 #define AT91C_PA13_MOSI (AT91C_PIO_PA13) // SPI Master Out Slave
2149 #define AT91C_PA13_PWM2 (AT91C_PIO_PA13) // PWM Channel 2
2150 #define AT91C_PIO_PA14 (1 << 14) // Pin Controlled by PA14
2151 #define AT91C_PA14_SPCK (AT91C_PIO_PA14) // SPI Serial Clock
2152 #define AT91C_PA14_PWM3 (AT91C_PIO_PA14) // PWM Channel 3
2153 #define AT91C_PIO_PA15 (1 << 15) // Pin Controlled by PA15
2154 #define AT91C_PA15_TF (AT91C_PIO_PA15) // SSC Transmit Frame Sync
2155 #define AT91C_PA15_TIOA1 (AT91C_PIO_PA15) // Timer Counter 1 Multipurpose Timer I/O Pin A
2156 #define AT91C_PIO_PA16 (1 << 16) // Pin Controlled by PA16
2157 #define AT91C_PA16_TK (AT91C_PIO_PA16) // SSC Transmit Clock
2158 #define AT91C_PA16_TIOB1 (AT91C_PIO_PA16) // Timer Counter 1 Multipurpose Timer I/O Pin B
2159 #define AT91C_PIO_PA17 (1 << 17) // Pin Controlled by PA17
2160 #define AT91C_PA17_TD (AT91C_PIO_PA17) // SSC Transmit data
2161 #define AT91C_PA17_PCK1 (AT91C_PIO_PA17) // PMC Programmable Clock Output 1
2162 #define AT91C_PIO_PA18 (1 << 18) // Pin Controlled by PA18
2163 #define AT91C_PA18_RD (AT91C_PIO_PA18) // SSC Receive Data
2164 #define AT91C_PA18_PCK2 (AT91C_PIO_PA18) // PMC Programmable Clock Output 2
2165 #define AT91C_PIO_PA19 (1 << 19) // Pin Controlled by PA19
2166 #define AT91C_PA19_RK (AT91C_PIO_PA19) // SSC Receive Clock
2167 #define AT91C_PA19_FIQ (AT91C_PIO_PA19) // AIC Fast Interrupt Input
2168 #define AT91C_PIO_PA20 (1 << 20) // Pin Controlled by PA20
2169 #define AT91C_PA20_RF (AT91C_PIO_PA20) // SSC Receive Frame Sync
2170 #define AT91C_PA20_IRQ0 (AT91C_PIO_PA20) // External Interrupt 0
2171 #define AT91C_PIO_PA21 (1 << 21) // Pin Controlled by PA21
2172 #define AT91C_PA21_RXD1 (AT91C_PIO_PA21) // USART 1 Receive Data
2173 #define AT91C_PA21_PCK1 (AT91C_PIO_PA21) // PMC Programmable Clock Output 1
2174 #define AT91C_PIO_PA22 (1 << 22) // Pin Controlled by PA22
2175 #define AT91C_PA22_TXD1 (AT91C_PIO_PA22) // USART 1 Transmit Data
2176 #define AT91C_PA22_NPCS3 (AT91C_PIO_PA22) // SPI Peripheral Chip Select 3
2177 #define AT91C_PIO_PA23 (1 << 23) // Pin Controlled by PA23
2178 #define AT91C_PA23_SCK1 (AT91C_PIO_PA23) // USART 1 Serial Clock
2179 #define AT91C_PA23_PWM0 (AT91C_PIO_PA23) // PWM Channel 0
2180 #define AT91C_PIO_PA24 (1 << 24) // Pin Controlled by PA24
2181 #define AT91C_PA24_RTS1 (AT91C_PIO_PA24) // USART 1 Ready To Send
2182 #define AT91C_PA24_PWM1 (AT91C_PIO_PA24) // PWM Channel 1
2183 #define AT91C_PIO_PA25 (1 << 25) // Pin Controlled by PA25
2184 #define AT91C_PA25_CTS1 (AT91C_PIO_PA25) // USART 1 Clear To Send
2185 #define AT91C_PA25_PWM2 (AT91C_PIO_PA25) // PWM Channel 2
2186 #define AT91C_PIO_PA26 (1 << 26) // Pin Controlled by PA26
2187 #define AT91C_PA26_DCD1 (AT91C_PIO_PA26) // USART 1 Data Carrier Detect
2188 #define AT91C_PA26_TIOA2 (AT91C_PIO_PA26) // Timer Counter 2 Multipurpose Timer I/O Pin A
2189 #define AT91C_PIO_PA27 (1 << 27) // Pin Controlled by PA27
2190 #define AT91C_PA27_DTR1 (AT91C_PIO_PA27) // USART 1 Data Terminal ready
2191 #define AT91C_PA27_TIOB2 (AT91C_PIO_PA27) // Timer Counter 2 Multipurpose Timer I/O Pin B
2192 #define AT91C_PIO_PA28 (1 << 28) // Pin Controlled by PA28
2193 #define AT91C_PA28_DSR1 (AT91C_PIO_PA28) // USART 1 Data Set ready
2194 #define AT91C_PA28_TCLK1 (AT91C_PIO_PA28) // Timer Counter 1 external clock input
2195 #define AT91C_PIO_PA29 (1 << 29) // Pin Controlled by PA29
2196 #define AT91C_PA29_RI1 (AT91C_PIO_PA29) // USART 1 Ring Indicator
2197 #define AT91C_PA29_TCLK2 (AT91C_PIO_PA29) // Timer Counter 2 external clock input
2198 #define AT91C_PIO_PA30 (1 << 30) // Pin Controlled by PA30
2199 #define AT91C_PA30_IRQ1 (AT91C_PIO_PA30) // External Interrupt 1
2200 #define AT91C_PA30_NPCS2 (AT91C_PIO_PA30) // SPI Peripheral Chip Select 2
2201 #define AT91C_PIO_PA31 (1 << 31) // Pin Controlled by PA31
2202 #define AT91C_PA31_NPCS1 (AT91C_PIO_PA31) // SPI Peripheral Chip Select 1
2203 #define AT91C_PA31_PCK2 (AT91C_PIO_PA31) // PMC Programmable Clock Output 2
2204
2205 // *****************************************************************************
2206 // PERIPHERAL ID DEFINITIONS FOR AT91SAM7S512
2207 // *****************************************************************************
2208 #define AT91C_ID_FIQ ( 0) // Advanced Interrupt Controller (FIQ)
2209 #define AT91C_ID_SYS ( 1) // System Peripheral
2210 #define AT91C_ID_PIOA ( 2) // Parallel IO Controller
2211 #define AT91C_ID_3_Reserved ( 3) // Reserved
2212 #define AT91C_ID_ADC ( 4) // Analog-to-Digital Converter
2213 #define AT91C_ID_SPI ( 5) // Serial Peripheral Interface
2214 #define AT91C_ID_US0 ( 6) // USART 0
2215 #define AT91C_ID_US1 ( 7) // USART 1
2216 #define AT91C_ID_SSC ( 8) // Serial Synchronous Controller
2217 #define AT91C_ID_TWI ( 9) // Two-Wire Interface
2218 #define AT91C_ID_PWMC (10) // PWM Controller
2219 #define AT91C_ID_UDP (11) // USB Device Port
2220 #define AT91C_ID_TC0 (12) // Timer Counter 0
2221 #define AT91C_ID_TC1 (13) // Timer Counter 1
2222 #define AT91C_ID_TC2 (14) // Timer Counter 2
2223 #define AT91C_ID_15_Reserved (15) // Reserved
2224 #define AT91C_ID_16_Reserved (16) // Reserved
2225 #define AT91C_ID_17_Reserved (17) // Reserved
2226 #define AT91C_ID_18_Reserved (18) // Reserved
2227 #define AT91C_ID_19_Reserved (19) // Reserved
2228 #define AT91C_ID_20_Reserved (20) // Reserved
2229 #define AT91C_ID_21_Reserved (21) // Reserved
2230 #define AT91C_ID_22_Reserved (22) // Reserved
2231 #define AT91C_ID_23_Reserved (23) // Reserved
2232 #define AT91C_ID_24_Reserved (24) // Reserved
2233 #define AT91C_ID_25_Reserved (25) // Reserved
2234 #define AT91C_ID_26_Reserved (26) // Reserved
2235 #define AT91C_ID_27_Reserved (27) // Reserved
2236 #define AT91C_ID_28_Reserved (28) // Reserved
2237 #define AT91C_ID_29_Reserved (29) // Reserved
2238 #define AT91C_ID_IRQ0 (30) // Advanced Interrupt Controller (IRQ0)
2239 #define AT91C_ID_IRQ1 (31) // Advanced Interrupt Controller (IRQ1)
2240 #define AT91C_ALL_INT (0xC0007FF7) // ALL VALID INTERRUPTS
2241
2242 // *****************************************************************************
2243 // BASE ADDRESS DEFINITIONS FOR AT91SAM7S512
2244 // *****************************************************************************
2245 #define AT91C_BASE_SYS (AT91_CAST(AT91PS_SYS) 0xFFFFF000) // (SYS) Base Address
2246 #define AT91C_BASE_AIC (AT91_CAST(AT91PS_AIC) 0xFFFFF000) // (AIC) Base Address
2247 #define AT91C_BASE_PDC_DBGU (AT91_CAST(AT91PS_PDC) 0xFFFFF300) // (PDC_DBGU) Base Address
2248 #define AT91C_BASE_DBGU (AT91_CAST(AT91PS_DBGU) 0xFFFFF200) // (DBGU) Base Address
2249 #define AT91C_BASE_PIOA (AT91_CAST(AT91PS_PIO) 0xFFFFF400) // (PIOA) Base Address
2250 #define AT91C_BASE_CKGR (AT91_CAST(AT91PS_CKGR) 0xFFFFFC20) // (CKGR) Base Address
2251 #define AT91C_BASE_PMC (AT91_CAST(AT91PS_PMC) 0xFFFFFC00) // (PMC) Base Address
2252 #define AT91C_BASE_RSTC (AT91_CAST(AT91PS_RSTC) 0xFFFFFD00) // (RSTC) Base Address
2253 #define AT91C_BASE_RTTC (AT91_CAST(AT91PS_RTTC) 0xFFFFFD20) // (RTTC) Base Address
2254 #define AT91C_BASE_PITC (AT91_CAST(AT91PS_PITC) 0xFFFFFD30) // (PITC) Base Address
2255 #define AT91C_BASE_WDTC (AT91_CAST(AT91PS_WDTC) 0xFFFFFD40) // (WDTC) Base Address
2256 #define AT91C_BASE_VREG (AT91_CAST(AT91PS_VREG) 0xFFFFFD60) // (VREG) Base Address
2257 #define AT91C_BASE_EFC0 (AT91_CAST(AT91PS_EFC) 0xFFFFFF60) // (EFC0) Base Address
2258 #define AT91C_BASE_EFC1 (AT91_CAST(AT91PS_EFC) 0xFFFFFF70) // (EFC1) Base Address
2259 #define AT91C_BASE_MC (AT91_CAST(AT91PS_MC) 0xFFFFFF00) // (MC) Base Address
2260 #define AT91C_BASE_PDC_SPI (AT91_CAST(AT91PS_PDC) 0xFFFE0100) // (PDC_SPI) Base Address
2261 #define AT91C_BASE_SPI (AT91_CAST(AT91PS_SPI) 0xFFFE0000) // (SPI) Base Address
2262 #define AT91C_BASE_PDC_ADC (AT91_CAST(AT91PS_PDC) 0xFFFD8100) // (PDC_ADC) Base Address
2263 #define AT91C_BASE_ADC (AT91_CAST(AT91PS_ADC) 0xFFFD8000) // (ADC) Base Address
2264 #define AT91C_BASE_PDC_SSC (AT91_CAST(AT91PS_PDC) 0xFFFD4100) // (PDC_SSC) Base Address
2265 #define AT91C_BASE_SSC (AT91_CAST(AT91PS_SSC) 0xFFFD4000) // (SSC) Base Address
2266 #define AT91C_BASE_PDC_US1 (AT91_CAST(AT91PS_PDC) 0xFFFC4100) // (PDC_US1) Base Address
2267 #define AT91C_BASE_US1 (AT91_CAST(AT91PS_USART) 0xFFFC4000) // (US1) Base Address
2268 #define AT91C_BASE_PDC_US0 (AT91_CAST(AT91PS_PDC) 0xFFFC0100) // (PDC_US0) Base Address
2269 #define AT91C_BASE_US0 (AT91_CAST(AT91PS_USART) 0xFFFC0000) // (US0) Base Address
2270 #define AT91C_BASE_TWI (AT91_CAST(AT91PS_TWI) 0xFFFB8000) // (TWI) Base Address
2271 #define AT91C_BASE_TC0 (AT91_CAST(AT91PS_TC) 0xFFFA0000) // (TC0) Base Address
2272 #define AT91C_BASE_TC1 (AT91_CAST(AT91PS_TC) 0xFFFA0040) // (TC1) Base Address
2273 #define AT91C_BASE_TC2 (AT91_CAST(AT91PS_TC) 0xFFFA0080) // (TC2) Base Address
2274 #define AT91C_BASE_TCB (AT91_CAST(AT91PS_TCB) 0xFFFA0000) // (TCB) Base Address
2275 #define AT91C_BASE_PWMC_CH3 (AT91_CAST(AT91PS_PWMC_CH) 0xFFFCC260) // (PWMC_CH3) Base Address
2276 #define AT91C_BASE_PWMC_CH2 (AT91_CAST(AT91PS_PWMC_CH) 0xFFFCC240) // (PWMC_CH2) Base Address
2277 #define AT91C_BASE_PWMC_CH1 (AT91_CAST(AT91PS_PWMC_CH) 0xFFFCC220) // (PWMC_CH1) Base Address
2278 #define AT91C_BASE_PWMC_CH0 (AT91_CAST(AT91PS_PWMC_CH) 0xFFFCC200) // (PWMC_CH0) Base Address
2279 #define AT91C_BASE_PWMC (AT91_CAST(AT91PS_PWMC) 0xFFFCC000) // (PWMC) Base Address
2280 #define AT91C_BASE_UDP (AT91_CAST(AT91PS_UDP) 0xFFFB0000) // (UDP) Base Address
2281
2282 // *****************************************************************************
2283 // MEMORY MAPPING DEFINITIONS FOR AT91SAM7S512
2284 // *****************************************************************************
2285 // ISRAM
2286 #define AT91C_ISRAM (0x00200000) // Internal SRAM base address
2287 #define AT91C_ISRAM_SIZE (0x00010000) // Internal SRAM size in byte (64 Kbytes)
2288 // IFLASH
2289 #define AT91C_IFLASH (0x00100000) // Internal FLASH base address
2290 #define AT91C_IFLASH_SIZE (0x00080000) // Internal FLASH size in byte (512 Kbytes)
2291 #define AT91C_IFLASH_PAGE_SIZE (256) // Internal FLASH Page Size: 256 bytes
2292 #define AT91C_IFLASH_LOCK_REGION_SIZE (16384) // Internal FLASH Lock Region Size: 16 Kbytes
2293 #define AT91C_IFLASH_NB_OF_PAGES (2048) // Internal FLASH Number of Pages: 2048 bytes
2294 #define AT91C_IFLASH_NB_OF_LOCK_BITS (32) // Internal FLASH Number of Lock Bits: 32 bytes
2295
2296 #endif
Impressum, Datenschutz