#include "crc16.h"
#include "string.h"
#include "lfdemod.h"
+#include "lfsampling.h"
/**
-* Does the sample acquisition. If threshold is specified, the actual sampling
-* is not commenced until the threshold has been reached.
-* @param trigger_threshold - the threshold
-* @param silent - is true, now outputs are made. If false, dbprints the status
-*/
-void DoAcquisition125k_internal(int trigger_threshold,bool silent)
-{
- uint8_t *dest = BigBuf_get_addr();
- int n = BigBuf_max_traceLen();
- int i;
-
- memset(dest, 0, n);
- i = 0;
- for(;;) {
- if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
- AT91C_BASE_SSC->SSC_THR = 0x43;
- LED_D_ON();
- }
- if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
- dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
- LED_D_OFF();
- if (trigger_threshold != -1 && dest[i] < trigger_threshold)
- continue;
- else
- trigger_threshold = -1;
- if (++i >= n) break;
- }
- }
- if(!silent)
- {
- Dbprintf("buffer samples: %02x %02x %02x %02x %02x %02x %02x %02x ...",
- dest[0], dest[1], dest[2], dest[3], dest[4], dest[5], dest[6], dest[7]);
-
- }
-}
-/**
-* Perform sample aquisition.
-*/
-void DoAcquisition125k(int trigger_threshold)
-{
- DoAcquisition125k_internal(trigger_threshold, false);
-}
-
-/**
-* Setup the FPGA to listen for samples. This method downloads the FPGA bitstream
-* if not already loaded, sets divisor and starts up the antenna.
-* @param divisor : 1, 88> 255 or negative ==> 134.8 KHz
-* 0 or 95 ==> 125 KHz
-*
-**/
-void LFSetupFPGAForADC(int divisor, bool lf_field)
-{
- FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
- if ( (divisor == 1) || (divisor < 0) || (divisor > 255) )
- FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
- else if (divisor == 0)
- FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
- else
- FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor);
-
- FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | (lf_field ? FPGA_LF_ADC_READER_FIELD : 0));
-
- // Connect the A/D to the peak-detected low-frequency path.
- SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
- // Give it a bit of time for the resonant antenna to settle.
- SpinDelay(50);
- // Now set up the SSC to get the ADC samples that are now streaming at us.
- FpgaSetupSsc();
-}
-/**
-* Initializes the FPGA, and acquires the samples.
-**/
-void AcquireRawAdcSamples125k(int divisor)
-{
- LFSetupFPGAForADC(divisor, true);
- // Now call the acquisition routine
- DoAcquisition125k_internal(-1,false);
-}
-/**
-* Initializes the FPGA for snoop-mode, and acquires the samples.
-**/
-
-void SnoopLFRawAdcSamples(int divisor, int trigger_threshold)
-{
- LFSetupFPGAForADC(divisor, false);
- DoAcquisition125k(trigger_threshold);
-}
-
+ * Function to do a modulation and then get samples.
+ * @param delay_off
+ * @param period_0
+ * @param period_1
+ * @param command
+ */
void ModThenAcquireRawAdcSamples125k(int delay_off, int period_0, int period_1, uint8_t *command)
{
- /* Make sure the tag is reset */
- FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
- FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
- SpinDelay(2500);
-
-
int divisor_used = 95; // 125 KHz
// see if 'h' was specified
if (command[strlen((char *) command) - 1] == 'h')
divisor_used = 88; // 134.8 KHz
+ sample_config sc = { 0,0,1, divisor_used, 0};
+ setSamplingConfig(&sc);
- FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used);
- FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
- // Give it a bit of time for the resonant antenna to settle.
- SpinDelay(50);
+ /* Make sure the tag is reset */
+ FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+ SpinDelay(2500);
- // And a little more time for the tag to fully power up
- SpinDelay(2000);
+ LFSetupFPGAForADC(sc.divisor, 1);
- // Now set up the SSC to get the ADC samples that are now streaming at us.
- FpgaSetupSsc();
+ // And a little more time for the tag to fully power up
+ SpinDelay(2000);
// now modulate the reader field
while(*command != '\0' && *command != ' ') {
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
LED_D_OFF();
SpinDelayUs(delay_off);
- FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used);
+ FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor);
FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
LED_D_ON();
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
LED_D_OFF();
SpinDelayUs(delay_off);
- FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used);
+ FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor);
FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
// now do the read
- DoAcquisition125k(-1);
+ DoAcquisition_config(false);
}
+
+
/* blank r/w tag data stream
...0000000000000000 01111111
1010101010101010101010101010101010101010101010101010101010101010
#define FREQLO 123200
#define FREQHI 134200
- signed char *dest = (signed char *)BigBuf;
- int n = sizeof(BigBuf);
+ signed char *dest = (signed char *)BigBuf_get_addr();
+ uint16_t n = BigBuf_max_traceLen();
// 128 bit shift register [shift3:shift2:shift1:shift0]
uint32_t shift3 = 0, shift2 = 0, shift1 = 0, shift0 = 0;
#define TIBUFLEN 1250
// clear buffer
- memset(BigBuf,0,sizeof(BigBuf));
+ uint32_t *BigBuf = (uint32_t *)BigBuf_get_addr();
+ memset(BigBuf,0,BigBuf_max_traceLen()/sizeof(uint32_t));
// Set up the synchronous serial port
AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DIN;
AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DOUT;
AT91C_BASE_PIOA->PIO_ASR = GPIO_SSC_DIN | GPIO_SSC_DOUT;
- char *dest = (char *)BigBuf;
+ char *dest = (char *)BigBuf_get_addr();
n = TIBUFLEN*32;
// unpack buffer
for (i=TIBUFLEN-1; i>=0; i--) {
void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
{
int i;
- uint8_t *tab = (uint8_t *)BigBuf;
+ uint8_t *tab = BigBuf_get_addr();
FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT);
// compose fc/8 fc/10 waveform
static void fc(int c, int *n) {
- uint8_t *dest = (uint8_t *)BigBuf;
+ uint8_t *dest = BigBuf_get_addr();
int idx;
// for when we want an fc8 pattern every 4 logical bits
// loop to get raw HID waveform then FSK demodulate the TAG ID from it
void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
{
- uint8_t *dest = (uint8_t *)BigBuf;
-
- size_t size=0; //, found=0;
+ uint8_t *dest = BigBuf_get_addr();
+ const size_t sizeOfBigBuff = BigBuf_max_traceLen();
+ size_t size = 0;
uint32_t hi2=0, hi=0, lo=0;
-
+ int idx=0;
// Configure to go in 125Khz listen mode
LFSetupFPGAForADC(95, true);
WDT_HIT();
if (ledcontrol) LED_A_ON();
- DoAcquisition125k_internal(-1,true);
- // FSK demodulator
+ DoAcquisition_default(-1,true);
+ // FSK demodulator
- size = HIDdemodFSK(dest, sizeof(BigBuf), &hi2, &hi, &lo);
-
- WDT_HIT();
-
- if (size>0 && lo>0){
+ size = sizeOfBigBuff; //variable size will change after demod so re initialize it before use
+ idx = HIDdemodFSK(dest, &size, &hi2, &hi, &lo);
+
+ if (idx>0 && lo>0){
// final loop, go over previously decoded manchester data and decode into usable tag ID
// 111000 bit pattern represent start of frame, 01 pattern represents a 1 and 10 represents a 0
if (hi2 != 0){ //extra large HID tags
}
if (findone){
if (ledcontrol) LED_A_OFF();
+ *high = hi;
+ *low = lo;
return;
}
// reset
void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol)
{
- uint8_t *dest = (uint8_t *)BigBuf;
+ uint8_t *dest = BigBuf_get_addr();
- size_t size=0;
+ size_t size=0, idx=0;
int clk=0, invert=0, errCnt=0;
uint64_t lo=0;
// Configure to go in 125Khz listen mode
WDT_HIT();
if (ledcontrol) LED_A_ON();
- DoAcquisition125k_internal(-1,true);
- size = BigBuf_max_traceLen();
+ DoAcquisition_default(-1,true);
- size = sizeof(BigBuf);
++ size = BigBuf_max_traceLen();
//Dbprintf("DEBUG: Buffer got");
//askdemod and manchester decode
errCnt = askmandemod(dest, &size, &clk, &invert);
WDT_HIT();
if (errCnt>=0){
- lo = Em410xDecode(dest,size);
+ lo = Em410xDecode(dest, &size, &idx);
//Dbprintf("DEBUG: EM GOT");
if (lo>0){
Dbprintf("EM TAG ID: %02x%08x - (%05d_%03d_%08d)",
}
if (findone){
if (ledcontrol) LED_A_OFF();
+ *high=lo>>32;
+ *low=lo & 0xFFFFFFFF;
return;
}
} else{
void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
{
- uint8_t *dest = (uint8_t *)BigBuf;
+ uint8_t *dest = BigBuf_get_addr();
int idx=0;
uint32_t code=0, code2=0;
uint8_t version=0;
while(!BUTTON_PRESS()) {
WDT_HIT();
if (ledcontrol) LED_A_ON();
- DoAcquisition125k_internal(-1,true);
- //fskdemod and get start index
+ DoAcquisition_default(-1,true);
+ //fskdemod and get start index
WDT_HIT();
- idx = IOdemodFSK(dest,sizeof(BigBuf));
+ idx = IOdemodFSK(dest, BigBuf_max_traceLen());
if (idx>0){
//valid tag found
if (findone){
if (ledcontrol) LED_A_OFF();
//LED_A_OFF();
+ *high=code;
+ *low=code2;
return;
}
code=code2=0;
// Read one card block in page 0
void T55xxReadBlock(uint32_t Block, uint32_t Pwd, uint8_t PwdMode)
{
- uint8_t *dest = (uint8_t *)BigBuf;
+ uint8_t *dest = BigBuf_get_addr();
//int m=0, i=0; //enio adjustment 12/10/14
uint32_t m=0, i=0;
FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
- m = sizeof(BigBuf);
+ m = BigBuf_max_traceLen();
// Clear destination buffer before sending the command
memset(dest, 128, m);
// Connect the A/D to the peak-detected low-frequency path.
// Read card traceability data (page 1)
void T55xxReadTrace(void){
- uint8_t *dest = (uint8_t *)BigBuf;
+ uint8_t *dest = BigBuf_get_addr();
int m=0, i=0;
FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
- m = sizeof(BigBuf);
+ m = BigBuf_max_traceLen();
// Clear destination buffer before sending the command
memset(dest, 128, m);
// Connect the A/D to the peak-detected low-frequency path.
int DemodPCF7931(uint8_t **outBlocks) {
uint8_t BitStream[256];
uint8_t Blocks[8][16];
- uint8_t *GraphBuffer = (uint8_t *)BigBuf;
- int GraphTraceLen = sizeof(BigBuf);
+ uint8_t *GraphBuffer = BigBuf_get_addr();
+ int GraphTraceLen = BigBuf_max_traceLen();
int i, j, lastval, bitidx, half_switch;
int clock = 64;
int tolerance = clock / 8;
int lmin=128, lmax=128;
uint8_t dir;
- AcquireRawAdcSamples125k(0);
+ LFSetupFPGAForADC(95, true);
+ DoAcquisition_default(0, 0);
+
lmin = 64;
lmax = 192;
void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
uint8_t fwd_bit_count;
- uint8_t *dest = (uint8_t *)BigBuf;
+ uint8_t *dest = BigBuf_get_addr();
int m=0, i=0;
//If password mode do login
fwd_bit_count = Prepare_Cmd( FWD_CMD_READ );
fwd_bit_count += Prepare_Addr( Address );
- m = sizeof(BigBuf);
+ m = BigBuf_max_traceLen();
// Clear destination buffer before sending the command
memset(dest, 128, m);
// Connect the A/D to the peak-detected low-frequency path.
#include "cmdmain.h"
#include "cmddata.h"
#include "lfdemod.h"
+#include "usb_cmd.h"
+
uint8_t DemodBuffer[MAX_DEMOD_BUF_LEN];
+ uint8_t g_debugMode;
int DemodBufferLen;
static int CmdHelp(const char *Cmd);
//set the demod buffer with given array of binary (one bit per byte)
//by marshmellow
- void setDemodBuf(uint8_t *buff,int size)
+ void setDemodBuf(uint8_t *buff, size_t size, size_t startIdx)
{
- int i=0;
- for (; i < size; ++i){
- DemodBuffer[i]=buff[i];
+ size_t i = 0;
+ for (; i < size; i++){
+ DemodBuffer[i]=buff[startIdx++];
}
DemodBufferLen=size;
return;
}
+ int CmdSetDebugMode(const char *Cmd)
+ {
+ int demod=0;
+ sscanf(Cmd, "%i", &demod);
+ g_debugMode=(uint8_t)demod;
+ return 1;
+ }
+
//by marshmellow
void printDemodBuff()
{
{
if (id !=0){
uint64_t iii=1;
- uint64_t id2lo=0; //id2hi=0,
+ uint64_t id2lo=0;
uint32_t ii=0;
uint32_t i=0;
for (ii=5; ii>0;ii--){
}
//output em id
PrintAndLog("EM TAG ID : %010llx", id);
- PrintAndLog("Unique TAG ID: %010llx", id2lo); //id2hi,
+ PrintAndLog("Unique TAG ID: %010llx", id2lo);
PrintAndLog("DEZ 8 : %08lld",id & 0xFFFFFF);
PrintAndLog("DEZ 10 : %010lld",id & 0xFFFFFF);
PrintAndLog("DEZ 5.5 : %05lld.%05lld",(id>>16LL) & 0xFFFF,(id & 0xFFFF));
int CmdEm410xDecode(const char *Cmd)
{
uint64_t id=0;
- // uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
- // uint32_t i=0;
- // i=getFromGraphBuf(BitStream);
- id = Em410xDecode(DemodBuffer,DemodBufferLen);
- printEM410x(id);
- if (id>0) return 1;
+ size_t size = DemodBufferLen, idx=0;
+ id = Em410xDecode(DemodBuffer, &size, &idx);
+ if (id>0){
+ setDemodBuf(DemodBuffer, size, idx);
+ if (g_debugMode){
+ PrintAndLog("DEBUG: Printing demod buffer:");
+ printDemodBuff();
+ }
+ printEM410x(id);
+ return 1;
+ }
return 0;
}
//prints binary found and saves in graphbuffer for further commands
int Cmdaskmandemod(const char *Cmd)
{
- int invert=0;
+ int invert=0;
int clk=0;
uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
sscanf(Cmd, "%i %i", &clk, &invert);
}
size_t BitLen = getFromGraphBuf(BitStream);
- // PrintAndLog("DEBUG: Bitlen from grphbuff: %d",BitLen);
+ if (g_debugMode==1) PrintAndLog("DEBUG: Bitlen from grphbuff: %d",BitLen);
int errCnt=0;
errCnt = askmandemod(BitStream, &BitLen,&clk,&invert);
if (errCnt<0||BitLen<16){ //if fatal error (or -1)
- // PrintAndLog("no data found %d, errors:%d, bitlen:%d, clock:%d",errCnt,invert,BitLen,clk);
+ if (g_debugMode==1) PrintAndLog("no data found %d, errors:%d, bitlen:%d, clock:%d",errCnt,invert,BitLen,clk);
return 0;
}
PrintAndLog("\nUsing Clock: %d - Invert: %d - Bits Found: %d",clk,invert,BitLen);
}
PrintAndLog("ASK/Manchester decoded bitstream:");
// Now output the bitstream to the scrollback by line of 16 bits
- setDemodBuf(BitStream,BitLen);
+ setDemodBuf(BitStream,BitLen,0);
printDemodBuff();
uint64_t lo =0;
- lo = Em410xDecode(BitStream,BitLen);
+ size_t idx=0;
+ lo = Em410xDecode(BitStream, &BitLen, &idx);
if (lo>0){
//set GraphBuffer for clone or sim command
+ setDemodBuf(BitStream, BitLen, idx);
+ if (g_debugMode){
+ PrintAndLog("DEBUG: idx: %d, Len: %d, Printing Demod Buffer:", idx, BitLen);
+ printDemodBuff();
+ }
PrintAndLog("EM410x pattern found: ");
printEM410x(lo);
return 1;
}
- //if (BitLen>16) return 1;
return 0;
}
printBitStream(BitStream, size);
if (errCnt==0){
uint64_t id = 0;
- id = Em410xDecode(BitStream, size);
- if (id>0) setDemodBuf(BitStream, size);
- printEM410x(id);
+ size_t idx=0;
+ id = Em410xDecode(BitStream, &size, &idx);
+ if (id>0){
+ //need to adjust to set bitstream back to manchester encoded data
+ //setDemodBuf(BitStream, size, idx);
+
+ printEM410x(id);
+ }
}
return 1;
}
//by marshmellow
//biphase decode
//take 01 or 10 = 0 and 11 or 00 = 1
- //takes 1 argument "offset" default = 0 if 1 it will shift the decode by one bit
+ //takes 2 arguments "offset" default = 0 if 1 it will shift the decode by one bit
+ // and "invert" default = 0 if 1 it will invert output
// since it is not like manchester and doesn't have an incorrect bit pattern we
// cannot determine if our decode is correct or if it should be shifted by one bit
// the argument offset allows us to manually shift if the output is incorrect
int errCnt=0;
size_t size=0;
int offset=0;
+ int invert=0;
int high=0, low=0;
- sscanf(Cmd, "%i", &offset);
+ sscanf(Cmd, "%i %i", &offset, &invert);
uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
//get graphbuffer & high and low
for (;i<DemodBufferLen;++i){
return 0;
}
size=i;
- errCnt=BiphaseRawDecode(BitStream, &size, offset);
+ errCnt=BiphaseRawDecode(BitStream, &size, offset, invert);
if (errCnt>=20){
PrintAndLog("Too many errors attempting to decode: %d",errCnt);
return 0;
return 1;
}
-
//by marshmellow
//takes 2 arguments - clock and invert both as integers
//attempts to demodulate ask only
errCnt = askrawdemod(BitStream, &BitLen,&clk,&invert);
if (errCnt==-1||BitLen<16){ //throw away static - allow 1 and -1 (in case of threshold command first)
PrintAndLog("no data found");
+ if (g_debugMode==1) PrintAndLog("errCnt: %d, BitLen: %d, clk: %d, invert: %d", errCnt, BitLen, clk, invert);
return 0;
}
PrintAndLog("Using Clock: %d - invert: %d - Bits Found: %d",clk,invert,BitLen);
- //PrintAndLog("Data start pos:%d, lastBit:%d, stop pos:%d, numBits:%d",iii,lastBit,i,bitnum);
- //move BitStream back to DemodBuffer
- setDemodBuf(BitStream,BitLen);
+
+ //move BitStream back to DemodBuffer
+ setDemodBuf(BitStream,BitLen,0);
- //output
+ //output
if (errCnt>0){
PrintAndLog("# Errors during Demoding (shown as 77 in bit stream): %d",errCnt);
}
bit ^= 1;
AppendGraph(0, clock, bit);
- // for (j = 0; j < (int)(clock/2); j++)
- // GraphBuffer[(i * clock) + j] = bit ^ 1;
- // for (j = (int)(clock/2); j < clock; j++)
- // GraphBuffer[(i * clock) + j] = bit;
}
RepaintGraphWindow();
RepaintGraphWindow();
return 0;
}
+/**
+ * Undecimate - I'd call it 'interpolate', but we'll save that
+ * name until someone does an actual interpolation command, not just
+ * blindly repeating samples
+ * @param Cmd
+ * @return
+ */
+int CmdUndec(const char *Cmd)
+{
+ if(param_getchar(Cmd, 0) == 'h')
+ {
+ PrintAndLog("Usage: data undec [factor]");
+ PrintAndLog("This function performs un-decimation, by repeating each sample N times");
+ PrintAndLog("Options: ");
+ PrintAndLog(" h This help");
+ PrintAndLog(" factor The number of times to repeat each sample.[default:2]");
+ PrintAndLog("Example: 'data undec 3'");
+ return 0;
+ }
+
+ uint8_t factor = param_get8ex(Cmd, 0,2, 10);
+ //We have memory, don't we?
+ int swap[MAX_GRAPH_TRACE_LEN] = { 0 };
+ uint32_t g_index = 0 ,s_index = 0;
+ while(g_index < GraphTraceLen && s_index < MAX_GRAPH_TRACE_LEN)
+ {
+ int count = 0;
+ for(count = 0; count < factor && s_index+count < MAX_GRAPH_TRACE_LEN; count ++)
+ swap[s_index+count] = GraphBuffer[g_index];
+ s_index+=count;
+ }
+
+ memcpy(GraphBuffer,swap, s_index * sizeof(int));
+ GraphTraceLen = s_index;
+ RepaintGraphWindow();
+ return 0;
+}
+ //by marshmellow
+ //shift graph zero up or down based on input + or -
+ int CmdGraphShiftZero(const char *Cmd)
+ {
+
+ int shift=0;
+ //set options from parameters entered with the command
+ sscanf(Cmd, "%i", &shift);
+ int shiftedVal=0;
+ for(int i = 0; i<GraphTraceLen; i++){
+ shiftedVal=GraphBuffer[i]+shift;
+ if (shiftedVal>127)
+ shiftedVal=127;
+ else if (shiftedVal<-127)
+ shiftedVal=-127;
+ GraphBuffer[i]= shiftedVal;
+ }
+ CmdNorm("");
+ return 0;
+ }
+
/* Print our clock rate */
// uses data from graphbuffer
int CmdDetectClockRate(const char *Cmd)
{
//raw fsk demod no manchester decoding no start bit finding just get binary from wave
//set defaults
- int rfLen = 50;
+ int rfLen = 0;
int invert=0;
- int fchigh=10;
- int fclow=8;
+ int fchigh=0;
+ int fclow=0;
//set options from parameters entered with the command
sscanf(Cmd, "%i %i %i %i", &rfLen, &invert, &fchigh, &fclow);
if (strlen(Cmd)>0 && strlen(Cmd)<=2) {
- //rfLen=param_get8(Cmd, 0); //if rfLen option only is used
if (rfLen==1){
invert=1; //if invert option only is used
- rfLen = 50;
- } else if(rfLen==0) rfLen=50;
+ rfLen = 0;
+ }
}
- PrintAndLog("Args invert: %d - Clock:%d - fchigh:%d - fclow: %d",invert,rfLen,fchigh, fclow);
+
uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
size_t BitLen = getFromGraphBuf(BitStream);
+ //get field clock lengths
+ uint16_t fcs=0;
+ if (fchigh==0 || fclow == 0){
+ fcs=countFC(BitStream, BitLen);
+ if (fcs==0){
+ fchigh=10;
+ fclow=8;
+ }else{
+ fchigh = (fcs >> 8) & 0xFF;
+ fclow = fcs & 0xFF;
+ }
+ }
+ //get bit clock length
+ if (rfLen==0){
+ rfLen = detectFSKClk(BitStream, BitLen, fchigh, fclow);
+ if (rfLen == 0) rfLen = 50;
+ }
+ PrintAndLog("Args invert: %d - Clock:%d - fchigh:%d - fclow: %d",invert,rfLen,fchigh, fclow);
int size = fskdemod(BitStream,BitLen,(uint8_t)rfLen,(uint8_t)invert,(uint8_t)fchigh,(uint8_t)fclow);
if (size>0){
PrintAndLog("FSK decoded bitstream:");
- setDemodBuf(BitStream,size);
+ setDemodBuf(BitStream,size,0);
// Now output the bitstream to the scrollback by line of 16 bits
if(size > (8*32)+2) size = (8*32)+2; //only output a max of 8 blocks of 32 bits most tags will have full bit stream inside that sample size
uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
size_t BitLen = getFromGraphBuf(BitStream);
//get binary from fsk wave
- size_t size = HIDdemodFSK(BitStream,BitLen,&hi2,&hi,&lo);
- if (size<0){
- PrintAndLog("Error demoding fsk");
+ int idx = HIDdemodFSK(BitStream,&BitLen,&hi2,&hi,&lo);
+ if (idx<0){
+ if (g_debugMode){
+ if (idx==-1){
+ PrintAndLog("DEBUG: Just Noise Detected");
+ } else if (idx == -2) {
+ PrintAndLog("DEBUG: Error demoding fsk");
+ } else if (idx == -3) {
+ PrintAndLog("DEBUG: Preamble not found");
+ } else if (idx == -4) {
+ PrintAndLog("DEBUG: Error in Manchester data, SIZE: %d", BitLen);
+ } else {
+ PrintAndLog("DEBUG: Error demoding fsk %d", idx);
+ }
+ }
+ return 0;
+ }
+ if (hi2==0 && hi==0 && lo==0) {
+ if (g_debugMode) PrintAndLog("DEBUG: Error - no values found");
return 0;
}
- if (hi2==0 && hi==0 && lo==0) return 0;
if (hi2 != 0){ //extra large HID tags
PrintAndLog("HID Prox TAG ID: %x%08x%08x (%d)",
(unsigned int) hi2, (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
- setDemodBuf(BitStream,BitLen);
- return 1;
}
else { //standard HID tags <38 bits
- //Dbprintf("TAG ID: %x%08x (%d)",(unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF); //old print cmd
uint8_t fmtLen = 0;
uint32_t fc = 0;
uint32_t cardnum = 0;
PrintAndLog("HID Prox TAG ID: %x%08x (%d) - Format Len: %dbit - FC: %d - Card: %d",
(unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF,
(unsigned int) fmtLen, (unsigned int) fc, (unsigned int) cardnum);
- setDemodBuf(BitStream,BitLen);
- return 1;
}
- return 0;
+ setDemodBuf(BitStream,BitLen,idx);
+ if (g_debugMode){
+ PrintAndLog("DEBUG: idx: %d, Len: %d, Printing Demod Buffer:", idx, BitLen);
+ printDemodBuff();
+ }
+ return 1;
}
+ //by marshmellow
+ //Paradox Prox demod - FSK RF/50 with preamble of 00001111 (then manchester encoded)
+ //print full Paradox Prox ID and some bit format details if found
+ int CmdFSKdemodParadox(const char *Cmd)
+ {
+ //raw fsk demod no manchester decoding no start bit finding just get binary from wave
+ uint32_t hi2=0, hi=0, lo=0;
+
+ uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
+ size_t BitLen = getFromGraphBuf(BitStream);
+ //get binary from fsk wave
+ int idx = ParadoxdemodFSK(BitStream,&BitLen,&hi2,&hi,&lo);
+ if (idx<0){
+ if (g_debugMode){
+ if (idx==-1){
+ PrintAndLog("DEBUG: Just Noise Detected");
+ } else if (idx == -2) {
+ PrintAndLog("DEBUG: Error demoding fsk");
+ } else if (idx == -3) {
+ PrintAndLog("DEBUG: Preamble not found");
+ } else if (idx == -4) {
+ PrintAndLog("DEBUG: Error in Manchester data");
+ } else {
+ PrintAndLog("DEBUG: Error demoding fsk %d", idx);
+ }
+ }
+ return 0;
+ }
+ if (hi2==0 && hi==0 && lo==0){
+ if (g_debugMode) PrintAndLog("DEBUG: Error - no value found");
+ return 0;
+ }
+ uint32_t fc = ((hi & 0x3)<<6) | (lo>>26);
+ uint32_t cardnum = (lo>>10)&0xFFFF;
+
+ PrintAndLog("Paradox TAG ID: %x%08x - FC: %d - Card: %d - Checksum: %02x",
+ hi>>10, (hi & 0x3)<<26 | (lo>>10), fc, cardnum, (lo>>2) & 0xFF );
+ setDemodBuf(BitStream,BitLen,idx);
+ if (g_debugMode){
+ PrintAndLog("DEBUG: idx: %d, len: %d, Printing Demod Buffer:", idx, BitLen);
+ printDemodBuff();
+ }
+ return 1;
+ }
+
+
//by marshmellow
//IO-Prox demod - FSK RF/64 with preamble of 000000001
//print ioprox ID and some format details
//raw fsk demod no manchester decoding no start bit finding just get binary from wave
//set defaults
int idx=0;
- //something in graphbuffer
- if (GraphTraceLen < 65) return 0;
+ //something in graphbuffer?
+ if (GraphTraceLen < 65) {
+ if (g_debugMode)PrintAndLog("DEBUG: not enough samples in GraphBuffer");
+ return 0;
+ }
uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
size_t BitLen = getFromGraphBuf(BitStream);
+
//get binary from fsk wave
- // PrintAndLog("DEBUG: got buff");
idx = IOdemodFSK(BitStream,BitLen);
if (idx<0){
- //PrintAndLog("Error demoding fsk");
+ if (g_debugMode){
+ if (idx==-1){
+ PrintAndLog("DEBUG: Just Noise Detected");
+ } else if (idx == -2) {
+ PrintAndLog("DEBUG: not enough samples");
+ } else if (idx == -3) {
+ PrintAndLog("DEBUG: error during fskdemod");
+ } else if (idx == -4) {
+ PrintAndLog("DEBUG: Preamble not found");
+ } else if (idx == -5) {
+ PrintAndLog("DEBUG: Separator bits not found");
+ } else {
+ PrintAndLog("DEBUG: Error demoding fsk %d", idx);
+ }
+ }
return 0;
}
- // PrintAndLog("DEBUG: Got IOdemodFSK");
if (idx==0){
- //PrintAndLog("IO Prox Data not found - FSK Data:");
- //if (BitLen > 92) printBitStream(BitStream,92);
+ if (g_debugMode==1){
+ PrintAndLog("DEBUG: IO Prox Data not found - FSK Bits: %d",BitLen);
+ if (BitLen > 92) printBitStream(BitStream,92);
+ }
return 0;
}
//Index map
//
//XSF(version)facility:codeone+codetwo (raw)
//Handle the data
- if (idx+64>BitLen) return 0;
+ if (idx+64>BitLen) {
+ if (g_debugMode==1) PrintAndLog("not enough bits found - bitlen: %d",BitLen);
+ return 0;
+ }
PrintAndLog("%d%d%d%d%d%d%d%d %d",BitStream[idx], BitStream[idx+1], BitStream[idx+2], BitStream[idx+3], BitStream[idx+4], BitStream[idx+5], BitStream[idx+6], BitStream[idx+7], BitStream[idx+8]);
PrintAndLog("%d%d%d%d%d%d%d%d %d",BitStream[idx+9], BitStream[idx+10], BitStream[idx+11],BitStream[idx+12],BitStream[idx+13],BitStream[idx+14],BitStream[idx+15],BitStream[idx+16],BitStream[idx+17]);
PrintAndLog("%d%d%d%d%d%d%d%d %d facility",BitStream[idx+18], BitStream[idx+19], BitStream[idx+20],BitStream[idx+21],BitStream[idx+22],BitStream[idx+23],BitStream[idx+24],BitStream[idx+25],BitStream[idx+26]);
uint8_t facilitycode = bytebits_to_byte(BitStream+idx+18,8) ;
uint16_t number = (bytebits_to_byte(BitStream+idx+36,8)<<8)|(bytebits_to_byte(BitStream+idx+45,8)); //36,9
PrintAndLog("IO Prox XSF(%02d)%02x:%05d (%08x%08x)",version,facilitycode,number,code,code2);
- int i;
- for (i=0;i<64;++i)
- DemodBuffer[i]=BitStream[idx++];
+ setDemodBuf(BitStream,64,idx);
+ if (g_debugMode){
+ PrintAndLog("DEBUG: idx: %d, Len: %d, Printing demod buffer:",idx,64);
+ printDemodBuff();
+ }
+ return 1;
+ }
+
+
+ //by marshmellow
+ //AWID Prox demod - FSK RF/50 with preamble of 00000001 (always a 96 bit data stream)
+ //print full AWID Prox ID and some bit format details if found
+ int CmdFSKdemodAWID(const char *Cmd)
+ {
+
+ //int verbose=1;
+ //sscanf(Cmd, "%i", &verbose);
+
+ //raw fsk demod no manchester decoding no start bit finding just get binary from wave
+ uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
+ size_t size = getFromGraphBuf(BitStream);
+
+ //get binary from fsk wave
+ int idx = AWIDdemodFSK(BitStream, &size);
+ if (idx<=0){
+ if (g_debugMode==1){
+ if (idx == -1)
+ PrintAndLog("DEBUG: Error - not enough samples");
+ else if (idx == -2)
+ PrintAndLog("DEBUG: Error - only noise found");
+ else if (idx == -3)
+ PrintAndLog("DEBUG: Error - problem during FSK demod");
+ // else if (idx == -3)
+ // PrintAndLog("Error: thought we had a tag but the parity failed");
+ else if (idx == -4)
+ PrintAndLog("DEBUG: Error - AWID preamble not found");
+ else if (idx == -5)
+ PrintAndLog("DEBUG: Error - Size not correct: %d", size);
+ else
+ PrintAndLog("DEBUG: Error %d",idx);
+ }
+ return 0;
+ }
- DemodBufferLen=64;
+ // Index map
+ // 0 10 20 30 40 50 60
+ // | | | | | | |
+ // 01234567 890 1 234 5 678 9 012 3 456 7 890 1 234 5 678 9 012 3 456 7 890 1 234 5 678 9 012 3 - to 96
+ // -----------------------------------------------------------------------------
+ // 00000001 000 1 110 1 101 1 011 1 101 1 010 0 000 1 000 1 010 0 001 0 110 1 100 0 000 1 000 1
+ // premable bbb o bbb o bbw o fff o fff o ffc o ccc o ccc o ccc o ccc o ccc o wxx o xxx o xxx o - to 96
+ // |---26 bit---| |-----117----||-------------142-------------|
+ // b = format bit len, o = odd parity of last 3 bits
+ // f = facility code, c = card number
+ // w = wiegand parity
+ // (26 bit format shown)
+
+ //get raw ID before removing parities
+ uint32_t rawLo = bytebits_to_byte(BitStream+idx+64,32);
+ uint32_t rawHi = bytebits_to_byte(BitStream+idx+32,32);
+ uint32_t rawHi2 = bytebits_to_byte(BitStream+idx,32);
+ setDemodBuf(BitStream,96,idx);
+
+ size = removeParity(BitStream, idx+8, 4, 1, 88);
+ if (size != 66){
+ if (g_debugMode==1) PrintAndLog("DEBUG: Error - at parity check-tag size does not match AWID format");
+ return 0;
+ }
+ // ok valid card found!
+
+ // Index map
+ // 0 10 20 30 40 50 60
+ // | | | | | | |
+ // 01234567 8 90123456 7890123456789012 3 456789012345678901234567890123456
+ // -----------------------------------------------------------------------------
+ // 00011010 1 01110101 0000000010001110 1 000000000000000000000000000000000
+ // bbbbbbbb w ffffffff cccccccccccccccc w xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+ // |26 bit| |-117--| |-----142------|
+ // b = format bit len, o = odd parity of last 3 bits
+ // f = facility code, c = card number
+ // w = wiegand parity
+ // (26 bit format shown)
+
+ uint32_t fc = 0;
+ uint32_t cardnum = 0;
+ uint32_t code1 = 0;
+ uint32_t code2 = 0;
+ uint8_t fmtLen = bytebits_to_byte(BitStream,8);
+ if (fmtLen==26){
+ fc = bytebits_to_byte(BitStream+9, 8);
+ cardnum = bytebits_to_byte(BitStream+17, 16);
+ code1 = bytebits_to_byte(BitStream+8,fmtLen);
+ PrintAndLog("AWID Found - BitLength: %d, FC: %d, Card: %d - Wiegand: %x, Raw: %x%08x%08x", fmtLen, fc, cardnum, code1, rawHi2, rawHi, rawLo);
+ } else {
+ cardnum = bytebits_to_byte(BitStream+8+(fmtLen-17), 16);
+ if (fmtLen>32){
+ code1 = bytebits_to_byte(BitStream+8,fmtLen-32);
+ code2 = bytebits_to_byte(BitStream+8+(fmtLen-32),32);
+ PrintAndLog("AWID Found - BitLength: %d -unknown BitLength- (%d) - Wiegand: %x%08x, Raw: %x%08x%08x", fmtLen, cardnum, code1, code2, rawHi2, rawHi, rawLo);
+ } else{
+ code1 = bytebits_to_byte(BitStream+8,fmtLen);
+ PrintAndLog("AWID Found - BitLength: %d -unknown BitLength- (%d) - Wiegand: %x, Raw: %x%08x%08x", fmtLen, cardnum, code1, rawHi2, rawHi, rawLo);
+ }
+ }
+ if (g_debugMode){
+ PrintAndLog("DEBUG: idx: %d, Len: %d Printing Demod Buffer:", idx, 96);
+ printDemodBuff();
+ }
+ //todo - convert hi2, hi, lo to demodbuffer for future sim/clone commands
return 1;
}
+
+ //by marshmellow
+ //Pyramid Prox demod - FSK RF/50 with preamble of 0000000000000001 (always a 128 bit data stream)
+ //print full Farpointe Data/Pyramid Prox ID and some bit format details if found
+ int CmdFSKdemodPyramid(const char *Cmd)
+ {
+ //raw fsk demod no manchester decoding no start bit finding just get binary from wave
+ uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
+ size_t size = getFromGraphBuf(BitStream);
+
+ //get binary from fsk wave
+ int idx = PyramiddemodFSK(BitStream, &size);
+ if (idx < 0){
+ if (g_debugMode==1){
+ if (idx == -5)
+ PrintAndLog("DEBUG: Error - not enough samples");
+ else if (idx == -1)
+ PrintAndLog("DEBUG: Error - only noise found");
+ else if (idx == -2)
+ PrintAndLog("DEBUG: Error - problem during FSK demod");
+ else if (idx == -3)
+ PrintAndLog("DEBUG: Error - Size not correct: %d", size);
+ else if (idx == -4)
+ PrintAndLog("DEBUG: Error - Pyramid preamble not found");
+ else
+ PrintAndLog("DEBUG: Error - idx: %d",idx);
+ }
+ return 0;
+ }
+ // Index map
+ // 0 10 20 30 40 50 60
+ // | | | | | | |
+ // 0123456 7 8901234 5 6789012 3 4567890 1 2345678 9 0123456 7 8901234 5 6789012 3
+ // -----------------------------------------------------------------------------
+ // 0000000 0 0000000 1 0000000 1 0000000 1 0000000 1 0000000 1 0000000 1 0000000 1
+ // premable xxxxxxx o xxxxxxx o xxxxxxx o xxxxxxx o xxxxxxx o xxxxxxx o xxxxxxx o
+
+ // 64 70 80 90 100 110 120
+ // | | | | | | |
+ // 4567890 1 2345678 9 0123456 7 8901234 5 6789012 3 4567890 1 2345678 9 0123456 7
+ // -----------------------------------------------------------------------------
+ // 0000000 1 0000000 1 0000000 1 0110111 0 0011000 1 0000001 0 0001100 1 1001010 0
+ // xxxxxxx o xxxxxxx o xxxxxxx o xswffff o ffffccc o ccccccc o ccccccw o ppppppp o
+ // |---115---||---------71---------|
+ // s = format start bit, o = odd parity of last 7 bits
+ // f = facility code, c = card number
+ // w = wiegand parity, x = extra space for other formats
+ // p = unknown checksum
+ // (26 bit format shown)
+
+ //get raw ID before removing parities
+ uint32_t rawLo = bytebits_to_byte(BitStream+idx+96,32);
+ uint32_t rawHi = bytebits_to_byte(BitStream+idx+64,32);
+ uint32_t rawHi2 = bytebits_to_byte(BitStream+idx+32,32);
+ uint32_t rawHi3 = bytebits_to_byte(BitStream+idx,32);
+ setDemodBuf(BitStream,128,idx);
+
+ size = removeParity(BitStream, idx+8, 8, 1, 120);
+ if (size != 105){
+ if (g_debugMode==1) PrintAndLog("DEBUG: Error at parity check-tag size does not match Pyramid format, SIZE: %d, IDX: %d, hi3: %x",size, idx, rawHi3);
+ return 0;
+ }
+
+ // ok valid card found!
+
+ // Index map
+ // 0 10 20 30 40 50 60 70
+ // | | | | | | | |
+ // 01234567890123456789012345678901234567890123456789012345678901234567890
+ // -----------------------------------------------------------------------
+ // 00000000000000000000000000000000000000000000000000000000000000000000000
+ // xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+ // 71 80 90 100
+ // | | | |
+ // 1 2 34567890 1234567890123456 7 8901234
+ // ---------------------------------------
+ // 1 1 01110011 0000000001000110 0 1001010
+ // s w ffffffff cccccccccccccccc w ppppppp
+ // |--115-| |------71------|
+ // s = format start bit, o = odd parity of last 7 bits
+ // f = facility code, c = card number
+ // w = wiegand parity, x = extra space for other formats
+ // p = unknown checksum
+ // (26 bit format shown)
+
+ //find start bit to get fmtLen
+ int j;
+ for (j=0; j<size; j++){
+ if(BitStream[j]) break;
+ }
+ uint8_t fmtLen = size-j-8;
+ uint32_t fc = 0;
+ uint32_t cardnum = 0;
+ uint32_t code1 = 0;
+ //uint32_t code2 = 0;
+ if (fmtLen==26){
+ fc = bytebits_to_byte(BitStream+73, 8);
+ cardnum = bytebits_to_byte(BitStream+81, 16);
+ code1 = bytebits_to_byte(BitStream+72,fmtLen);
+ PrintAndLog("Pyramid ID Found - BitLength: %d, FC: %d, Card: %d - Wiegand: %x, Raw: %x%08x%08x%08x", fmtLen, fc, cardnum, code1, rawHi3, rawHi2, rawHi, rawLo);
+ } else if (fmtLen==45){
+ fmtLen=42; //end = 10 bits not 7 like 26 bit fmt
+ fc = bytebits_to_byte(BitStream+53, 10);
+ cardnum = bytebits_to_byte(BitStream+63, 32);
+ PrintAndLog("Pyramid ID Found - BitLength: %d, FC: %d, Card: %d - Raw: %x%08x%08x%08x", fmtLen, fc, cardnum, rawHi3, rawHi2, rawHi, rawLo);
+ } else {
+ cardnum = bytebits_to_byte(BitStream+81, 16);
+ if (fmtLen>32){
+ //code1 = bytebits_to_byte(BitStream+(size-fmtLen),fmtLen-32);
+ //code2 = bytebits_to_byte(BitStream+(size-32),32);
+ PrintAndLog("Pyramid ID Found - BitLength: %d -unknown BitLength- (%d), Raw: %x%08x%08x%08x", fmtLen, cardnum, rawHi3, rawHi2, rawHi, rawLo);
+ } else{
+ //code1 = bytebits_to_byte(BitStream+(size-fmtLen),fmtLen);
+ PrintAndLog("Pyramid ID Found - BitLength: %d -unknown BitLength- (%d), Raw: %x%08x%08x%08x", fmtLen, cardnum, rawHi3, rawHi2, rawHi, rawLo);
+ }
+ }
+ if (g_debugMode){
+ PrintAndLog("DEBUG: idx: %d, Len: %d, Printing Demod Buffer:", idx, 128);
+ printDemodBuff();
+ }
+ return 1;
+ }
+
int CmdFSKdemod(const char *Cmd) //old CmdFSKdemod needs updating
{
static const int LowTone[] = {
PrintAndLog("actual data bits start at sample %d", maxPos);
PrintAndLog("length %d/%d", highLen, lowLen);
- uint8_t bits[46];
- bits[sizeof(bits)-1] = '\0';
+ uint8_t bits[46] = {0x00};
// find bit pairs and manchester decode them
for (i = 0; i < arraylen(bits) - 1; ++i) {
return 0;
}
+ //by marshmellow
+ //attempt to detect the field clock and bit clock for FSK
+ int CmdFSKfcDetect(const char *Cmd)
+ {
+ uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
+ size_t size = getFromGraphBuf(BitStream);
+
+ uint16_t ans = countFC(BitStream, size);
+ if (ans==0) {
+ if (g_debugMode) PrintAndLog("DEBUG: No data found");
+ return 0;
+ }
+ uint8_t fc1, fc2;
+ fc1 = (ans >> 8) & 0xFF;
+ fc2 = ans & 0xFF;
+
+ uint8_t rf1 = detectFSKClk(BitStream, size, fc1, fc2);
+ if (rf1==0) {
+ if (g_debugMode) PrintAndLog("DEBUG: Clock detect error");
+ return 0;
+ }
+ PrintAndLog("Detected Field Clocks: FC/%d, FC/%d - Bit Clock: RF/%d", fc1, fc2, rf1);
+ return 1;
+ }
+
+ //by marshmellow
+ //attempt to detect the bit clock for PSK or NRZ modulations
int CmdDetectNRZpskClockRate(const char *Cmd)
{
GetNRZpskClock("",0,0);
return 0;
}
- int PSKnrzDemod(const char *Cmd){
+ //by marshmellow
+ //attempt to psk1 or nrz demod graph buffer
+ //NOTE CURRENTLY RELIES ON PEAKS :(
+ int PSKnrzDemod(const char *Cmd, uint8_t verbose)
+ {
int invert=0;
int clk=0;
sscanf(Cmd, "%i %i", &clk, &invert);
int errCnt=0;
errCnt = pskNRZrawDemod(BitStream, &BitLen,&clk,&invert);
if (errCnt<0|| BitLen<16){ //throw away static - allow 1 and -1 (in case of threshold command first)
- //PrintAndLog("no data found, clk: %d, invert: %d, numbits: %d, errCnt: %d",clk,invert,BitLen,errCnt);
+ if (g_debugMode==1) PrintAndLog("no data found, clk: %d, invert: %d, numbits: %d, errCnt: %d",clk,invert,BitLen,errCnt);
return -1;
}
- PrintAndLog("Tried PSK/NRZ Demod using Clock: %d - invert: %d - Bits Found: %d",clk,invert,BitLen);
+ if (verbose) PrintAndLog("Tried PSK/NRZ Demod using Clock: %d - invert: %d - Bits Found: %d",clk,invert,BitLen);
//prime demod buffer for output
- setDemodBuf(BitStream,BitLen);
+ setDemodBuf(BitStream,BitLen,0);
return errCnt;
}
// Indala 26 bit decode
// optional arguments - same as CmdpskNRZrawDemod (clock & invert)
int CmdIndalaDecode(const char *Cmd)
{
- uint8_t verbose = 1;
int ans;
if (strlen(Cmd)>0){
- if (Cmd[0]=='0'){
- verbose=0;
- ans = PSKnrzDemod("32");
- }else{
- ans = PSKnrzDemod(Cmd);
- }
+ ans = PSKnrzDemod(Cmd, 0);
} else{ //default to RF/32
- ans = PSKnrzDemod("32");
+ ans = PSKnrzDemod("32", 0);
}
if (ans < 0){
- if (verbose)
+ if (g_debugMode==1)
PrintAndLog("Error1: %d",ans);
return 0;
}
uint8_t invert=0;
ans = indala26decode(DemodBuffer,(size_t *) &DemodBufferLen, &invert);
if (ans < 1) {
- if (verbose)
+ if (g_debugMode==1)
PrintAndLog("Error2: %d",ans);
return -1;
}
- char showbits[251];
+ char showbits[251]={0x00};
if (invert)
- if (verbose)
+ if (g_debugMode==1)
PrintAndLog("Had to invert bits");
+
//convert UID to HEX
uint32_t uid1, uid2, uid3, uid4, uid5, uid6, uid7;
int idx;
showbits[idx]='\0';
PrintAndLog("Indala UID=%s (%x%08x%08x%08x%08x%08x%08x)", showbits, uid1, uid2, uid3, uid4, uid5, uid6, uid7);
}
+ if (g_debugMode){
+ PrintAndLog("DEBUG: printing demodbuffer:");
+ printDemodBuff();
+ }
return 1;
}
+ //by marshmellow
+ //attempt to clean psk wave noise after a peak
+ //NOTE RELIES ON PEAKS :(
int CmdPskClean(const char *Cmd)
{
uint8_t bitStream[MAX_GRAPH_TRACE_LEN]={0};
return 0;
}
- //by marshmellow
- //takes 2 arguments - clock and invert both as integers
- //attempts to demodulate ask only
- //prints binary found and saves in graphbuffer for further commands
+ // by marshmellow
+ // takes 2 arguments - clock and invert both as integers
+ // attempts to demodulate psk only
+ // prints binary found and saves in demodbuffer for further commands
int CmdpskNRZrawDemod(const char *Cmd)
{
- uint8_t verbose = 1;
int errCnt;
- if (strlen(Cmd)>0){
- if (Cmd[0]=='0')
- verbose=0;
- }
-
- errCnt = PSKnrzDemod(Cmd);
+
+ errCnt = PSKnrzDemod(Cmd, 1);
//output
- if (errCnt<0) return 0;
+ if (errCnt<0){
+ if (g_debugMode) PrintAndLog("Error demoding: %d",errCnt);
+ return 0;
+ }
if (errCnt>0){
- if (verbose)
+ if (g_debugMode){
PrintAndLog("# Errors during Demoding (shown as 77 in bit stream): %d",errCnt);
- }
- PrintAndLog("PSK or NRZ demoded bitstream:");
- // Now output the bitstream to the scrollback by line of 16 bits
- printDemodBuff();
+ PrintAndLog("PSK or NRZ demoded bitstream:");
+ // Now output the bitstream to the scrollback by line of 16 bits
+ printDemodBuff();
+ }
+ }else{
+ PrintAndLog("PSK or NRZ demoded bitstream:");
+ // Now output the bitstream to the scrollback by line of 16 bits
+ printDemodBuff();
+ return 1;
+ }
+ return 0;
+ }
- return 1;
+ // by marshmellow
+ // takes same args as cmdpsknrzrawdemod
+ int CmdPSK2rawDemod(const char *Cmd)
+ {
+ int errCnt=0;
+ errCnt=PSKnrzDemod(Cmd, 1);
+ if (errCnt<0){
+ if (g_debugMode) PrintAndLog("Error demoding: %d",errCnt);
+ return 0;
+ }
+ psk1TOpsk2(DemodBuffer, DemodBufferLen);
+ if (errCnt>0){
+ if (g_debugMode){
+ PrintAndLog("# Errors during Demoding (shown as 77 in bit stream): %d",errCnt);
+ PrintAndLog("PSK2 demoded bitstream:");
+ // Now output the bitstream to the scrollback by line of 16 bits
+ printDemodBuff();
+ }
+ }else{
+ PrintAndLog("PSK2 demoded bitstream:");
+ // Now output the bitstream to the scrollback by line of 16 bits
+ printDemodBuff();
+ }
+ return 1;
}
int CmdGrid(const char *Cmd)
int offset = 0;
char string_buf[25];
char* string_ptr = string_buf;
- uint8_t got[40000];
+ uint8_t got[BIGBUF_SIZE];
sscanf(Cmd, "%i %i", &requested, &offset);
requested = 8;
}
if (offset + requested > sizeof(got)) {
- PrintAndLog("Tried to read past end of buffer, <bytes> + <offset> > 40000");
+ PrintAndLog("Tried to read past end of buffer, <bytes> + <offset> > %d", BIGBUF_SIZE);
return 0;
}
RepaintGraphWindow();
return 0;
}
+typedef struct {
+ uint8_t * buffer;
+ uint32_t numbits;
+ uint32_t position;
+}BitstreamOut;
+
+bool _headBit( BitstreamOut *stream)
+{
+ int bytepos = stream->position >> 3; // divide by 8
+ int bitpos = (stream->position++) & 7; // mask out 00000111
+ return (*(stream->buffer + bytepos) >> (7-bitpos)) & 1;
+}
+
+uint8_t getByte(uint8_t bits_per_sample, BitstreamOut* b)
+{
+ int i;
+ uint8_t val = 0;
+ for(i =0 ; i < bits_per_sample; i++)
+ {
+ val |= (_headBit(b) << (7-i));
+ }
+ return val;
+}
int CmdSamples(const char *Cmd)
{
- uint8_t got[BIGBUF_SIZE] = {0x00};
+ //If we get all but the last byte in bigbuf,
+ // we don't have to worry about remaining trash
+ // in the last byte in case the bits-per-sample
+ // does not line up on byte boundaries
- uint8_t got[40000-1];
++ uint8_t got[BIGBUF_SIZE-1] = { 0 };
int n = strtol(Cmd, NULL, 0);
if (n == 0)
- n = 20000;
+ n = sizeof(got);
if (n > sizeof(got))
n = sizeof(got);
- PrintAndLog("Reading %d samples from device memory\n", n);
+ PrintAndLog("Reading %d bytes from device memory\n", n);
GetFromBigBuf(got,n,0);
- WaitForResponse(CMD_ACK,NULL);
- for (int j = 0; j < n; j++) {
- GraphBuffer[j] = ((int)got[j]) - 128;
+ PrintAndLog("Data fetched");
+ UsbCommand response;
+ WaitForResponse(CMD_ACK, &response);
+ uint8_t bits_per_sample = 8;
+
+ //Old devices without this feature would send 0 at arg[0]
+ if(response.arg[0] > 0)
+ {
+ sample_config *sc = (sample_config *) response.d.asBytes;
+ PrintAndLog("Samples @ %d bits/smpl, decimation 1:%d ", sc->bits_per_sample
+ , sc->decimation);
+ bits_per_sample = sc->bits_per_sample;
}
- GraphTraceLen = n;
+ if(bits_per_sample < 8)
+ {
+ PrintAndLog("Unpacking...");
+ BitstreamOut bout = { got, bits_per_sample * n, 0};
+ int j =0;
+ for (j = 0; j * bits_per_sample < n * 8 && j < sizeof(GraphBuffer); j++) {
+ uint8_t sample = getByte(bits_per_sample, &bout);
+ GraphBuffer[j] = ((int) sample )- 128;
+ }
+ GraphTraceLen = j;
+ PrintAndLog("Unpacked %d samples" , j );
+ }else
+ {
+ for (int j = 0; j < n; j++) {
+ GraphBuffer[j] = ((int)got[j]) - 128;
+ }
+ GraphTraceLen = n;
+ }
+
RepaintGraphWindow();
return 0;
}
int CmdLoad(const char *Cmd)
{
- char filename[FILE_PATH_SIZE] = {0x00};
- int len = 0;
+ char filename[FILE_PATH_SIZE] = {0x00};
+ int len = 0;
- len = strlen(Cmd);
- if (len > FILE_PATH_SIZE) len = FILE_PATH_SIZE;
- memcpy(filename, Cmd, len);
+ len = strlen(Cmd);
+ if (len > FILE_PATH_SIZE) len = FILE_PATH_SIZE;
+ memcpy(filename, Cmd, len);
- FILE *f = fopen(filename, "r");
+ FILE *f = fopen(filename, "r");
if (!f) {
PrintAndLog("couldn't open '%s'", filename);
return 0;
RepaintGraphWindow();
return 0;
}
+
+ // trim graph to input argument length
int CmdRtrim(const char *Cmd)
{
int ds = atoi(Cmd);
int CmdSave(const char *Cmd)
{
- char filename[FILE_PATH_SIZE] = {0x00};
- int len = 0;
+ char filename[FILE_PATH_SIZE] = {0x00};
+ int len = 0;
- len = strlen(Cmd);
- if (len > FILE_PATH_SIZE) len = FILE_PATH_SIZE;
- memcpy(filename, Cmd, len);
+ len = strlen(Cmd);
+ if (len > FILE_PATH_SIZE) len = FILE_PATH_SIZE;
+ memcpy(filename, Cmd, len);
FILE *f = fopen(filename, "w");
{"help", CmdHelp, 1, "This help"},
{"amp", CmdAmp, 1, "Amplify peaks"},
{"askdemod", Cmdaskdemod, 1, "<0 or 1> -- Attempt to demodulate simple ASK tags"},
- {"askmandemod", Cmdaskmandemod, 1, "[clock] [invert<0|1>] -- Attempt to demodulate ASK/Manchester tags and output binary (args optional[clock will try Auto-detect])"},
- {"askrawdemod", Cmdaskrawdemod, 1, "[clock] [invert<0|1>] -- Attempt to demodulate ASK tags and output binary (args optional[clock will try Auto-detect])"},
+ {"askmandemod", Cmdaskmandemod, 1, "[clock] [invert<0|1>] -- Attempt to demodulate ASK/Manchester tags and output binary (args optional)"},
+ {"askrawdemod", Cmdaskrawdemod, 1, "[clock] [invert<0|1>] -- Attempt to demodulate ASK tags and output bin (args optional)"},
{"autocorr", CmdAutoCorr, 1, "<window length> -- Autocorrelation over window"},
- {"biphaserawdecode",CmdBiphaseDecodeRaw,1,"[offset] Biphase decode binary stream already in graph buffer (offset = bit to start decode from)"},
+ {"biphaserawdecode",CmdBiphaseDecodeRaw,1,"[offset] [invert<0|1>] Biphase decode bin stream in demod buffer (offset = 0|1 bits to shift the decode start)"},
{"bitsamples", CmdBitsamples, 0, "Get raw samples as bitstring"},
{"bitstream", CmdBitstream, 1, "[clock rate] -- Convert waveform into a bitstream"},
{"buffclear", CmdBuffClear, 1, "Clear sample buffer and graph window"},
{"dec", CmdDec, 1, "Decimate samples"},
{"detectclock", CmdDetectClockRate, 1, "Detect ASK clock rate"},
{"fskdemod", CmdFSKdemod, 1, "Demodulate graph window as a HID FSK"},
- {"fskhiddemod", CmdFSKdemodHID, 1, "Demodulate graph window as a HID FSK using raw"},
- {"fskiodemod", CmdFSKdemodIO, 1, "Demodulate graph window as an IO Prox FSK using raw"},
- {"fskrawdemod", CmdFSKrawdemod, 1, "[clock rate] [invert] [rchigh] [rclow] Demodulate graph window from FSK to binary (clock = 50)(invert = 1|0)(rchigh = 10)(rclow=8)"},
+ {"fskawiddemod", CmdFSKdemodAWID, 1, "Demodulate graph window as an AWID FSK tag using raw"},
+ {"fskfcdetect", CmdFSKfcDetect, 1, "Try to detect the Field Clock of an FSK wave"},
+ {"fskhiddemod", CmdFSKdemodHID, 1, "Demodulate graph window as a HID FSK tag using raw"},
+ {"fskiodemod", CmdFSKdemodIO, 1, "Demodulate graph window as an IO Prox tag FSK using raw"},
+ {"fskpyramiddemod",CmdFSKdemodPyramid,1, "Demodulate graph window as a Pyramid FSK tag using raw"},
+ {"fskparadoxdemod",CmdFSKdemodParadox,1, "Demodulate graph window as a Paradox FSK tag using raw"},
+ {"fskrawdemod", CmdFSKrawdemod, 1, "[clock rate] [invert] [rchigh] [rclow] Demodulate graph window from FSK to bin (clock = 50)(invert = 1|0)(rchigh = 10)(rclow=8)"},
{"grid", CmdGrid, 1, "<x> <y> -- overlay grid on graph window, use zero value to turn off either"},
{"hexsamples", CmdHexsamples, 0, "<bytes> [<offset>] -- Dump big buffer as hex bytes"},
{"hide", CmdHide, 1, "Hide graph window"},
{"plot", CmdPlot, 1, "Show graph window (hit 'h' in window for keystroke help)"},
{"pskclean", CmdPskClean, 1, "Attempt to clean psk wave"},
{"pskdetectclock",CmdDetectNRZpskClockRate, 1, "Detect ASK, PSK, or NRZ clock rate"},
- {"pskindalademod",CmdIndalaDecode, 1, "[clock] [invert<0|1>] -- Attempt to demodulate psk indala tags and output ID binary & hex (args optional[clock will try Auto-detect])"},
- {"psknrzrawdemod",CmdpskNRZrawDemod, 1, "[clock] [invert<0|1>] -- Attempt to demodulate psk or nrz tags and output binary (args optional[clock will try Auto-detect])"},
+ {"pskindalademod",CmdIndalaDecode, 1, "[clock] [invert<0|1>] -- Attempt to demodulate psk1 indala tags and output ID binary & hex (args optional)"},
+ {"psk1nrzrawdemod",CmdpskNRZrawDemod, 1, "[clock] [invert<0|1>] -- Attempt to demodulate psk1 or nrz tags and output binary (args optional)"},
+ {"psk2rawdemod", CmdPSK2rawDemod, 1, "[clock] [invert<0|1>] -- Attempt to demodulate psk2 tags and output binary (args optional)"},
{"samples", CmdSamples, 0, "[512 - 40000] -- Get raw samples for graph window"},
{"save", CmdSave, 1, "<filename> -- Save trace (from graph window)"},
{"scale", CmdScale, 1, "<int> -- Set cursor display scale"},
+ {"setdebugmode", CmdSetDebugMode, 1, "<0|1> -- Turn on or off Debugging Mode for demods"},
+ {"shiftgraphzero",CmdGraphShiftZero, 1, "<shift> -- Shift 0 for Graphed wave + or - shift value"},
{"threshold", CmdThreshold, 1, "<threshold> -- Maximize/minimize every value in the graph window depending on threshold"},
{"dirthreshold", CmdDirectionalThreshold, 1, "<thres up> <thres down> -- Max rising higher up-thres/ Min falling lower down-thres, keep rest as prev."},
{"tune", CmdTuneSamples, 0, "Get hw tune samples for graph window"},
- {"zerocrossings", CmdZerocrossings, 1, "Count time between zero-crossings"},
+ {"undec", CmdUndec, 1, "Un-decimate samples by 2"},
+ {"zerocrossings", CmdZerocrossings, 1, "Count time between zero-crossings"},
{NULL, NULL, 0, NULL}
};
projects / proxmark3-svn / commitdiff