break;
case CMD_DOWNLOADED_SIM_SAMPLES_125K: {
+ // iceman; since changing fpga_bitstreams clears bigbuff, Its better to call it before.
+ // to be able to use this one for uploading data to device
+ // arg1 = 0 upload for LF usage
+ // 1 upload for HF usage
+ if (c->arg[1] == 0)
+ FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+ else
+ FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
+
uint8_t *b = BigBuf_get_addr();
memcpy(b+c->arg[0], c->d.asBytes, USB_CMD_DATA_SIZE);
cmd_send(CMD_ACK,0,0,0,0,0);
break;
case CMD_SET_LF_DIVISOR:
- FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+ FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
FpgaSendCommand(FPGA_CMD_SET_DIVISOR, c->arg[0]);
break;
int i;
uint8_t *tab = BigBuf_get_addr();
- //note this may destroy the bigbuf so be sure this is called before now...
- FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+ //note FpgaDownloadAndGo destroys the bigbuf so be sure this is called before now...
+ //FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT);
AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT | GPIO_SSC_CLK;
fclose(f);
return -1;
}
- UsbCommand c={CMD_DOWNLOADED_SIM_SAMPLES_125K, {offset, 0, 0}};
+ UsbCommand c={CMD_DOWNLOADED_SIM_SAMPLES_125K, {offset, 1, 0}};
int j; for(j = 0; j < 8; j++) {
c.d.asBytes[j] = data[j];
}
}
int i;
- UsbCommand c={CMD_DOWNLOADED_SIM_SAMPLES_125K, {0, 0, 0}};
+ UsbCommand c={CMD_DOWNLOADED_SIM_SAMPLES_125K, {0, 1, 0}};
for(i = 0; i < 48; i++) {
c.d.asBytes[i] = cmd.arg[2];
}
sscanf(Cmd, "%i", &gap);
- // convert to bitstream if necessary
-
+ // convert to bitstream if necessary
ChkBitstream(Cmd);
//can send only 512 bits at a time (1 byte sent per bit...)
printf("Sending [%d bytes]", GraphTraceLen);
for (i = 0; i < GraphTraceLen; i += USB_CMD_DATA_SIZE) {
- UsbCommand c={CMD_DOWNLOADED_SIM_SAMPLES_125K, {i, 0, 0}};
+ UsbCommand c = {CMD_DOWNLOADED_SIM_SAMPLES_125K, {i, 0, 0}};
for (j = 0; j < USB_CMD_DATA_SIZE; j++) {
c.d.asBytes[j] = GraphBuffer[i+j];