case CMD_T55XX_WAKEUP:
T55xxWakeUp(c->arg[0]);
break;
- //case CMD_T55XX_READ_TRACE:
- // T55xxReadTrace();
- // break;
+ case CMD_T55XX_RESET_READ:
+ T55xxResetRead();
+ break;
case CMD_PCF7931_READ:
ReadPCF7931();
break;
void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo);
void CopyIndala64toT55x7(uint32_t hi, uint32_t lo); // Clone Indala 64-bit tag by UID to T55x7
void CopyIndala224toT55x7(uint32_t uid1, uint32_t uid2, uint32_t uid3, uint32_t uid4, uint32_t uid5, uint32_t uid6, uint32_t uid7); // Clone Indala 224-bit tag by UID to T55x7
+void T55xxResetRead(void);
void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t PwdMode);
void T55xxReadBlock(uint16_t arg0, uint8_t Block, uint32_t Pwd);
void T55xxWakeUp(uint32_t Pwd);
SpinDelayUs(WRITE_GAP);
}
+// Send T5577 reset command then read stream (see if we can identify the start of the stream)
+void T55xxResetRead(void) {
+ LED_A_ON();
+ // Set up FPGA, 125kHz
+ LFSetupFPGAForADC(95, true);
+
+ // Trigger T55x7 in mode.
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+ SpinDelayUs(START_GAP);
+
+ // reset tag - op code 00
+ T55xxWriteBit(0);
+ T55xxWriteBit(0);
+
+ // Turn field on to read the response
+ TurnReadLFOn(READ_GAP);
+
+ // Acquisition
+ doT55x7Acquisition(39999);
+
+ // Turn the field off
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
+ cmd_send(CMD_ACK,0,0,0,0,0);
+ LED_A_OFF();
+}
+
// Write one card block in page 0, no lock
-void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) {
+void T55xxWriteBlockExt(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) {
LED_A_ON();
bool PwdMode = arg & 0x1;
uint8_t Page = (arg & 0x2)>>1;
// turn field off
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
- cmd_send(CMD_ACK,0,0,0,0,0);
LED_A_OFF();
}
+// Write one card block in page 0, no lock
+void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) {
+ T55xxWriteBlockExt(Data, Block, Pwd, arg);
+ cmd_send(CMD_ACK,0,0,0,0,0);
+}
+
// Read one card block in page 0
void T55xxReadBlock(uint16_t arg0, uint8_t Block, uint32_t Pwd) {
LED_A_ON();
TurnReadLFOn(READ_GAP);
// Acquisition
- doT55x7Acquisition();
+ doT55x7Acquisition(12000);
// Turn the field off
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
void WriteT55xx(uint32_t *blockdata, uint8_t startblock, uint8_t numblocks) {
// write last block first and config block last (if included)
- for (uint8_t i = numblocks; i > startblock; i--)
- T55xxWriteBlock(blockdata[i-1],i-1,0,0);
+ for (uint8_t i = numblocks+startblock; i > startblock; i--) {
+ Dbprintf("write- Blk: %d, d:%08X",i-1,blockdata[i-1]);
+ T55xxWriteBlockExt(blockdata[i-1],i-1,0,0);
+ }
}
// Copy HID id to card and setup block 0 config
// Build the 6 data blocks for supplied 84bit ID
last_block = 6;
// load preamble (1D) & long format identifier (9E manchester encoded)
- data[1] = 0x1D96A900 | manchesterEncode2Bytes((hi2 >> 16) & 0xF);
+ data[1] = 0x1D96A900 | (manchesterEncode2Bytes((hi2 >> 16) & 0xF) & 0xFF);
// load raw id from hi2, hi, lo to data blocks (manchester encoded)
data[2] = manchesterEncode2Bytes(hi2 & 0xFFFF);
data[3] = manchesterEncode2Bytes(hi >> 16);
// Build the 3 data blocks for supplied 44bit ID
last_block = 3;
// load preamble
- data[1] = 0x1D000000 | manchesterEncode2Bytes(hi & 0xFFF);
+ data[1] = 0x1D000000 | (manchesterEncode2Bytes(hi) & 0xFFFFFF);
data[2] = manchesterEncode2Bytes(lo >> 16);
data[3] = manchesterEncode2Bytes(lo & 0xFFFF);
}
DbpString("DONE!");
}
-void CopyIOtoT55x7(uint32_t hi, uint32_t lo, uint8_t longFMT)
-{
+void CopyIOtoT55x7(uint32_t hi, uint32_t lo, uint8_t longFMT) {
uint32_t data[] = {T55x7_BITRATE_RF_64 | T55x7_MODULATION_FSK2a | (2 << T55x7_MAXBLOCK_SHIFT), hi, lo};
LED_D_ON();
DbpString("DONE!");
}
// Clone Indala 224-bit tag by UID to T55x7
-void CopyIndala224toT55x7(uint32_t uid1, uint32_t uid2, uint32_t uid3, uint32_t uid4, uint32_t uid5, uint32_t uid6, uint32_t uid7)
-{
+void CopyIndala224toT55x7(uint32_t uid1, uint32_t uid2, uint32_t uid3, uint32_t uid4, uint32_t uid5, uint32_t uid6, uint32_t uid7) {
//Program the 7 data blocks for supplied 224bit UID
uint32_t data[] = {0, uid1, uid2, uid3, uid4, uid5, uid6, uid7};
// and the block 0 for Indala224 format
#define EM410X_HEADER 0x1FF
#define EM410X_ID_LENGTH 40
-void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo)
-{
+void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo) {
int i, id_bit;
uint64_t id = EM410X_HEADER;
uint64_t rev_id = 0; // reversed ID
LED_D_ON();
// Write EM410x ID
- uint32_t data[] = {0, id>>32, id & 0xFFFF};
+ uint32_t data[] = {0, id>>32, id & 0xFFFFFFFF};
if (card) {
clock = (card & 0xFF00) >> 8;
clock = (clock == 0) ? 64 : clock;
* acquisition of T55x7 LF signal. Similart to other LF, but adjusted with @marshmellows thresholds
* the data is collected in BigBuf.
**/
-void doT55x7Acquisition(void){
+void doT55x7Acquisition(size_t sample_size) {
- #define T55xx_SAMPLES_SIZE 12000 // 32 x 32 x 10 (32 bit times numofblock (7), times clock skip..)
#define T55xx_READ_UPPER_THRESHOLD 128+40 // 50
#define T55xx_READ_TOL 5
uint8_t *dest = BigBuf_get_addr();
uint16_t bufsize = BigBuf_max_traceLen();
- if ( bufsize > T55xx_SAMPLES_SIZE )
- bufsize = T55xx_SAMPLES_SIZE;
+ if ( bufsize > sample_size )
+ bufsize = sample_size;
//memset(dest, 0, bufsize);
* acquisition of T55x7 LF signal. Similart to other LF, but adjusted with @marshmellows thresholds
* the data is collected in BigBuf.
**/
-void doT55x7Acquisition(void);
+void doT55x7Acquisition(size_t sample_size);
/**
* Initializes the FPGA for reader-mode (field on), and acquires the samples.
return tmp;\r
}\r
\r
+int CmdResetRead(const char *Cmd) {\r
+ UsbCommand c = {CMD_T55XX_RESET_READ, {0,0,0}};\r
+\r
+ clearCommandBuffer();\r
+ SendCommand(&c);\r
+ if ( !WaitForResponseTimeout(CMD_ACK,NULL,2500) ) {\r
+ PrintAndLog("command execution time out");\r
+ return 0;\r
+ }\r
+\r
+ uint8_t got[39999];\r
+ GetFromBigBuf(got,sizeof(got),0);\r
+ WaitForResponse(CMD_ACK,NULL);\r
+ setGraphBuf(got, sizeof(got));\r
+ return 1;\r
+}\r
+\r
static command_t CommandTable[] =\r
{\r
- {"help", CmdHelp, 1, "This help"},\r
- {"config", CmdT55xxSetConfig, 1, "Set/Get T55XX configuration (modulation, inverted, offset, rate)"},\r
- {"detect", CmdT55xxDetect, 0, "[1] Try detecting the tag modulation from reading the configuration block."},\r
- {"read", CmdT55xxReadBlock, 0, "b <block> p [password] [o] [1] -- Read T55xx block data (page 0) [optional password]"},\r
- {"write", CmdT55xxWriteBlock,0, "b <block> d <data> p [password] [1] -- Write T55xx block data (page 0) [optional password]"},\r
- {"trace", CmdT55xxReadTrace, 0, "[1] Show T55xx traceability data (page 1/ blk 0-1)"},\r
- {"info", CmdT55xxInfo, 0, "[1] Show T55xx configuration data (page 0/ blk 0)"},\r
- {"dump", CmdT55xxDump, 0, "[password] [o] Dump T55xx card block 0-7. [optional password]"},\r
- {"special", special, 0, "Show block changes with 64 different offsets"},\r
- {"wakeup", CmdT55xxWakeUp, 0, "Send AOR wakeup command"},\r
+ {"help", CmdHelp, 1, "This help"},\r
+ {"config", CmdT55xxSetConfig, 1, "Set/Get T55XX configuration (modulation, inverted, offset, rate)"},\r
+ {"detect", CmdT55xxDetect, 0, "[1] Try detecting the tag modulation from reading the configuration block."},\r
+ {"read", CmdT55xxReadBlock, 0, "b <block> p [password] [o] [1] -- Read T55xx block data (page 0) [optional password]"},\r
+ {"resetread",CmdResetRead, 0, "Send Reset Cmd then lf read the stream to attempt to identify the start of it (needs a demod and/or plot after)"},\r
+ {"write", CmdT55xxWriteBlock,0, "b <block> d <data> p [password] [1] -- Write T55xx block data (page 0) [optional password]"},\r
+ {"trace", CmdT55xxReadTrace, 0, "[1] Show T55xx traceability data (page 1/ blk 0-1)"},\r
+ {"info", CmdT55xxInfo, 0, "[1] Show T55xx configuration data (page 0/ blk 0)"},\r
+ {"dump", CmdT55xxDump, 0, "[password] [o] Dump T55xx card block 0-7. [optional password]"},\r
+ {"special", special, 0, "Show block changes with 64 different offsets"},\r
+ {"wakeup", CmdT55xxWakeUp, 0, "Send AOR wakeup command"},\r
{NULL, NULL, 0, NULL}\r
};\r
\r
int CmdT55xxReadTrace(const char *Cmd);\r
int CmdT55xxInfo(const char *Cmd);\r
int CmdT55xxDetect(const char *Cmd);\r
+int CmdResetRead(const char *Cmd);\r
\r
char * GetBitRateStr(uint32_t id);\r
char * GetSaferStr(uint32_t id);\r
#define CMD_INDALA_CLONE_TAG_L 0x0213
#define CMD_T55XX_READ_BLOCK 0x0214
#define CMD_T55XX_WRITE_BLOCK 0x0215
-//#define CMD_T55XX_READ_TRACE 0x0216
+#define CMD_T55XX_RESET_READ 0x0216
#define CMD_PCF7931_READ 0x0217
#define CMD_EM4X_READ_WORD 0x0218
#define CMD_EM4X_WRITE_WORD 0x0219
CMD_INDALA_CLONE_TAG_L = 0x0213,
CMD_T55XX_READ_BLOCK = 0x0214,
CMD_T55XX_WRITE_BLOCK = 0x0215,
- --//CMD_T55XX_READ_TRACE = 0x0216,
+ CMD_T55XX_RESET_READ = 0x0216,
CMD_PCF7931_READ = 0x0217,
CMD_EM4X_READ_WORD = 0x0218,
CMD_EM4X_WRITE_WORD = 0x0219,
#define CMD_INDALA_CLONE_TAG_L 0x0213
#define CMD_T55XX_READ_BLOCK 0x0214
#define CMD_T55XX_WRITE_BLOCK 0x0215
-//#define CMD_T55XX_READ_TRACE 0x0216
+#define CMD_T55XX_RESET_READ 0x0216
#define CMD_PCF7931_READ 0x0217
#define CMD_PCF7931_WRITE 0x0222
#define CMD_EM4X_READ_WORD 0x0218
projects / proxmark3-svn / commitdiff