//-----------------------------------------------------------------------------
// Routines to support ISO 14443 type A.
//-----------------------------------------------------------------------------
-
-#include "proxmark3.h"
-#include "apps.h"
-#include "util.h"
-#include "string.h"
-#include "cmd.h"
-#include "iso14443crc.h"
#include "iso14443a.h"
-#include "iso14443b.h"
-#include "crapto1.h"
-#include "mifareutil.h"
-#include "BigBuf.h"
-#include "parity.h"
static uint32_t iso14a_timeout;
int rsamples = 0;
//-----------------------------------------------------------------------------
void SimulateIso14443aTag(int tagType, int flags, byte_t* data) {
- // Here, we collect CUID, block1, keytype1, NT1, NR1, AR1, CUID, block2, keytyp2, NT2, NR2, AR2
- // it should also collect block, keytype.
- // This can be used in a reader-only attack.
- uint32_t ar_nr_responses[] = {0,0,0,0,0,0,0,0,0,0};
- uint8_t ar_nr_collected = 0;
uint8_t sak = 0;
uint32_t cuid = 0;
uint32_t nonce = 0;
// The first response contains the ATQA (note: bytes are transmitted in reverse order).
uint8_t response1[] = {0,0};
+
+ // Here, we collect CUID, block1, keytype1, NT1, NR1, AR1, CUID, block2, keytyp2, NT2, NR2, AR2
+ // it should also collect block, keytype.
+ uint8_t cardAUTHSC = 0;
+ uint8_t cardAUTHKEY = 0xff; // no authentication
+ // allow collecting up to 8 sets of nonces to allow recovery of up to 8 keys
+ #define ATTACK_KEY_COUNT 8 // keep same as define in cmdhfmf.c -> readerAttack()
+ nonces_t ar_nr_resp[ATTACK_KEY_COUNT*2]; //*2 for 2 separate attack types (nml, moebius)
+ memset(ar_nr_resp, 0x00, sizeof(ar_nr_resp));
+
+ uint8_t ar_nr_collected[ATTACK_KEY_COUNT*2]; //*2 for 2nd attack type (moebius)
+ memset(ar_nr_collected, 0x00, sizeof(ar_nr_collected));
+ uint8_t nonce1_count = 0;
+ uint8_t nonce2_count = 0;
+ uint8_t moebius_n_count = 0;
+ bool gettingMoebius = false;
+ uint8_t mM = 0; //moebius_modifier for collection storage
+
switch (tagType) {
case 1: { // MIFARE Classic 1k
if ( tagType == 7 || tagType == 2 ) {
//first 12 blocks of emu are [getversion answer - check tearing - pack - 0x00 - signature]
uint16_t start = 4 * (block+12);
- uint8_t emdata[MAX_MIFARE_FRAME_SIZE];
- emlGetMemBt( emdata, start, 16);
- AppendCrc14443a(emdata, 16);
- EmSendCmdEx(emdata, sizeof(emdata), false);
+ uint8_t emdata[MAX_MIFARE_FRAME_SIZE];
+ emlGetMemBt( emdata, start, 16);
+ AppendCrc14443a(emdata, 16);
+ EmSendCmdEx(emdata, sizeof(emdata), false);
// We already responded, do not send anything with the EmSendCmd14443aRaw() that is called below
p_response = NULL;
} else { // all other tags (16 byte block tags)
- EmSendCmdEx(data+(4*receivedCmd[1]),16,false);
+ uint8_t emdata[MAX_MIFARE_FRAME_SIZE];
+ emlGetMemBt( emdata, block, 16);
+ AppendCrc14443a(emdata, 16);
+ EmSendCmdEx(emdata, sizeof(emdata), false);
+ //EmSendCmdEx(data+(4*receivedCmd[1]),16,false);
// Dbprintf("Read request from reader: %x %x",receivedCmd[0],receivedCmd[1]);
// We already responded, do not send anything with the EmSendCmd14443aRaw() that is called below
p_response = NULL;
uint8_t emdata[10];
emlGetMemBt( emdata, 0, 8 );
AppendCrc14443a(emdata, sizeof(emdata)-2);
- EmSendCmdEx(emdata, sizeof(emdata), false);
+ EmSendCmdEx(emdata, sizeof(emdata), false);
p_response = NULL;
} else {
+ cardAUTHSC = receivedCmd[1] / 4; // received block num
+ cardAUTHKEY = receivedCmd[0] - 0x60;
p_response = &responses[5]; order = 7;
}
} else if(receivedCmd[0] == ISO14443A_CMD_RATS) { // Received a RATS request
uint32_t nr = bytes_to_num(receivedCmd,4);
uint32_t ar = bytes_to_num(receivedCmd+4,4);
+ // Collect AR/NR per keytype & sector
if ( (flags & FLAG_NR_AR_ATTACK) == FLAG_NR_AR_ATTACK ) {
- if(ar_nr_collected < 2){
- ar_nr_responses[ar_nr_collected*4] = cuid;
- ar_nr_responses[ar_nr_collected*4+1] = nonce;
- ar_nr_responses[ar_nr_collected*4+2] = nr;
- ar_nr_responses[ar_nr_collected*4+3] = ar;
- ar_nr_collected++;
- }
- if(ar_nr_collected > 1 ) {
- if (MF_DBGLEVEL >= 2 && !(flags & FLAG_INTERACTIVE)) {
- Dbprintf("Collected two pairs of AR/NR which can be used to extract keys from reader:");
- Dbprintf("../tools/mfkey/mfkey32v2.exe %08x %08x %08x %08x %08x %08x %08x",
- ar_nr_responses[0], // CUID
- ar_nr_responses[1], // NT_1
- ar_nr_responses[2], // AR_1
- ar_nr_responses[3], // NR_1
- ar_nr_responses[5], // NT_2
- ar_nr_responses[6], // AR_2
- ar_nr_responses[7] // NR_2
- );
+ for (uint8_t i = 0; i < ATTACK_KEY_COUNT; i++) {
+ if ( ar_nr_collected[i+mM]==0 || ((cardAUTHSC == ar_nr_resp[i+mM].sector) && (cardAUTHKEY == ar_nr_resp[i+mM].keytype) && (ar_nr_collected[i+mM] > 0)) ) {
+ // if first auth for sector, or matches sector and keytype of previous auth
+ if (ar_nr_collected[i+mM] < 2) {
+ // if we haven't already collected 2 nonces for this sector
+ if (ar_nr_resp[ar_nr_collected[i+mM]].ar != ar) {
+ // Avoid duplicates... probably not necessary, ar should vary.
+ if (ar_nr_collected[i+mM]==0) {
+ // first nonce collect
+ ar_nr_resp[i+mM].cuid = cuid;
+ ar_nr_resp[i+mM].sector = cardAUTHSC;
+ ar_nr_resp[i+mM].keytype = cardAUTHKEY;
+ ar_nr_resp[i+mM].nonce = nonce;
+ ar_nr_resp[i+mM].nr = nr;
+ ar_nr_resp[i+mM].ar = ar;
+ nonce1_count++;
+ // add this nonce to first moebius nonce
+ ar_nr_resp[i+ATTACK_KEY_COUNT].cuid = cuid;
+ ar_nr_resp[i+ATTACK_KEY_COUNT].sector = cardAUTHSC;
+ ar_nr_resp[i+ATTACK_KEY_COUNT].keytype = cardAUTHKEY;
+ ar_nr_resp[i+ATTACK_KEY_COUNT].nonce = nonce;
+ ar_nr_resp[i+ATTACK_KEY_COUNT].nr = nr;
+ ar_nr_resp[i+ATTACK_KEY_COUNT].ar = ar;
+ ar_nr_collected[i+ATTACK_KEY_COUNT]++;
+ } else { // second nonce collect (std and moebius)
+ ar_nr_resp[i+mM].nonce2 = nonce;
+ ar_nr_resp[i+mM].nr2 = nr;
+ ar_nr_resp[i+mM].ar2 = ar;
+ if (!gettingMoebius) {
+ nonce2_count++;
+ // check if this was the last second nonce we need for std attack
+ if ( nonce2_count == nonce1_count ) {
+ // done collecting std test switch to moebius
+ // first finish incrementing last sample
+ ar_nr_collected[i+mM]++;
+ // switch to moebius collection
+ gettingMoebius = true;
+ mM = ATTACK_KEY_COUNT;
+ break;
+ }
+ } else {
+ moebius_n_count++;
+ // if we've collected all the nonces we need - finish.
+ if (nonce1_count == moebius_n_count) {
+ cmd_send(CMD_ACK,CMD_SIMULATE_MIFARE_CARD,0,0,&ar_nr_resp,sizeof(ar_nr_resp));
+ nonce1_count = 0;
+ nonce2_count = 0;
+ moebius_n_count = 0;
+ gettingMoebius = false;
+ }
+ }
+ }
+ ar_nr_collected[i+mM]++;
+ }
+ }
+ // we found right spot for this nonce stop looking
+ break;
+ }
}
- uint8_t len = ar_nr_collected*4*4;
- cmd_send(CMD_ACK, CMD_SIMULATE_MIFARE_CARD, len, 0, &ar_nr_responses, len);
- ar_nr_collected = 0;
- memset(ar_nr_responses, 0x00, len);
}
- }
} else if (receivedCmd[0] == MIFARE_ULC_AUTH_1 ) { // ULC authentication, or Desfire Authentication
} else if (receivedCmd[0] == MIFARE_ULEV1_AUTH) { // NTAG / EV-1 authentication
BigBuf_free_keep_EM();
LED_A_OFF();
+ if(flags & FLAG_NR_AR_ATTACK && MF_DBGLEVEL >= 1) {
+ for ( uint8_t i = 0; i < ATTACK_KEY_COUNT; i++) {
+ if (ar_nr_collected[i] == 2) {
+ Dbprintf("Collected two pairs of AR/NR which can be used to extract %s from reader for sector %d:", (i<ATTACK_KEY_COUNT/2) ? "keyA" : "keyB", ar_nr_resp[i].sector);
+ Dbprintf("../tools/mfkey/mfkey32 %08x %08x %08x %08x %08x %08x",
+ ar_nr_resp[i].cuid, //UID
+ ar_nr_resp[i].nonce, //NT
+ ar_nr_resp[i].nr, //NR1
+ ar_nr_resp[i].ar, //AR1
+ ar_nr_resp[i].nr2, //NR2
+ ar_nr_resp[i].ar2 //AR2
+ );
+ }
+ }
+ for ( uint8_t i = ATTACK_KEY_COUNT; i < ATTACK_KEY_COUNT*2; i++) {
+ if (ar_nr_collected[i] == 2) {
+ Dbprintf("Collected two pairs of AR/NR which can be used to extract %s from reader for sector %d:", (i<ATTACK_KEY_COUNT/2) ? "keyA" : "keyB", ar_nr_resp[i].sector);
+ Dbprintf("../tools/mfkey/mfkey32v2 %08x %08x %08x %08x %08x %08x %08x",
+ ar_nr_resp[i].cuid, //UID
+ ar_nr_resp[i].nonce, //NT
+ ar_nr_resp[i].nr, //NR1
+ ar_nr_resp[i].ar, //AR1
+ ar_nr_resp[i].nonce2,//NT2
+ ar_nr_resp[i].nr2, //NR2
+ ar_nr_resp[i].ar2 //AR2
+ );
+ }
+ }
+ }
+
if (MF_DBGLEVEL >= 4){
Dbprintf("-[ Wake ups after halt [%d]", happened);
Dbprintf("-[ Messages after halt [%d]", happened2);
//-----------------------------------------------------------------------------
// Prepare reader command (in bits, support short frames) to send to FPGA
//-----------------------------------------------------------------------------
-void CodeIso14443aBitsAsReaderPar(const uint8_t *cmd, uint16_t bits, const uint8_t *parity)
-{
+void CodeIso14443aBitsAsReaderPar(const uint8_t *cmd, uint16_t bits, const uint8_t *parity) {
int i, j;
int last = 0;
uint8_t b;
#include "iso15693tools.h"
#include "cmd.h"
-#define arraylen(x) (sizeof(x)/sizeof((x)[0]))
-
///////////////////////////////////////////////////////////////////////
// ISO 15693 Part 2 - Air Interface
// This section basicly contains transmission and receiving of bits
#define AddCrc(data,datalen) Iso15693AddCrc(data,datalen)
#define sprintUID(target,uid) Iso15693sprintUID(target,uid)
-int DEBUG=0;
+int DEBUG = 0;
// ---------------------------
ToSendReset();
// Give it a bit of slack at the beginning
- for(i = 0; i < 24; i++) {
+ for(i = 0; i < 24; i++)
ToSendStuffBit(1);
- }
// SOF for 1of4
ToSendStuffBit(0);
ToSendStuffBit(1);
// And slack at the end, too.
- for(i = 0; i < 24; i++) {
+ for(i = 0; i < 24; i++)
ToSendStuffBit(1);
- }
}
// encode data using "1 out of 256" sheme
ToSendReset();
// Give it a bit of slack at the beginning
- for(i = 0; i < 24; i++) {
+ for(i = 0; i < 24; i++)
ToSendStuffBit(1);
- }
// SOF for 1of256
ToSendStuffBit(0);
ToSendStuffBit(0);
for(i = 0; i < n; i++) {
- for (j = 0; j<=255; j++) {
- if (cmd[i]==j) {
+ for (j = 0; j <= 255; j++) {
+ if (cmd[i] == j) {
ToSendStuffBit(1);
ToSendStuffBit(0);
} else {
ToSendStuffBit(1);
// And slack at the end, too.
- for(i = 0; i < 24; i++) {
+ for(i = 0; i < 24; i++)
ToSendStuffBit(1);
- }
}
{
int c;
volatile uint32_t r;
-// FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_MOD);
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_TX);
if(*wait < 10) { *wait = 10; }
{
uint8_t *dest = BigBuf_get_addr();
- int c = 0;
- int getNext = FALSE;
+ int c = 0, getNext = FALSE;
int8_t prev = 0;
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
// tone that the tag AM-modulates, so every other sample is I,
// every other is Q. We just want power, so abs(I) + abs(Q) is
// close to what we want.
+ // iceman 2016, amplitude sqrt(abs(i) + abs(q))
if(getNext) {
- int8_t r = ABS(b) + ABS(prev);
-
- dest[c++] = (uint8_t)r;
+ dest[c++] = (uint8_t)ABS(b) + ABS(prev);
- if(c >= 2000) {
+ if(c >= 2000)
break;
- }
} else {
prev = b;
}
//////////////////////////////////////////
int i, j;
- int max = 0, maxPos=0;
-
- int skip = 4;
-
+ int max = 0, maxPos=0, skip = 4;
+ int k = 0; // this will be our return value
+
// if(GraphTraceLen < 1000) return; // THIS CHECKS FOR A BUFFER TO SMALL
// First, correlate for SOF
for(i = 0; i < 100; i++) {
int corr = 0;
- for(j = 0; j < arraylen(FrameSOF); j += skip) {
- corr += FrameSOF[j]*dest[i+(j/skip)];
+ for(j = 0; j < ARRAYLEN(FrameSOF); j += skip) {
+ corr += FrameSOF[j] * dest[i+(j/skip)];
}
if(corr > max) {
max = corr;
maxPos = i;
}
}
- // DbpString("SOF at %d, correlation %d", maxPos,max/(arraylen(FrameSOF)/skip));
-
- int k = 0; // this will be our return value
+ // DbpString("SOF at %d, correlation %d", maxPos,max/(ARRAYLEN(FrameSOF)/skip));
// greg - If correlation is less than 1 then there's little point in continuing
- if ((max/(arraylen(FrameSOF)/skip)) >= 1)
+ if ((max/(ARRAYLEN(FrameSOF)/skip)) >= 1)
{
-
- i = maxPos + arraylen(FrameSOF)/skip;
+ i = maxPos + ARRAYLEN(FrameSOF) / skip;
uint8_t outBuf[20];
memset(outBuf, 0, sizeof(outBuf));
uint8_t mask = 0x01;
for(;;) {
int corr0 = 0, corr1 = 0, corrEOF = 0;
- for(j = 0; j < arraylen(Logic0); j += skip) {
- corr0 += Logic0[j]*dest[i+(j/skip)];
+ for(j = 0; j < ARRAYLEN(Logic0); j += skip) {
+ corr0 += Logic0[j] * dest[i+(j/skip)];
}
- for(j = 0; j < arraylen(Logic1); j += skip) {
- corr1 += Logic1[j]*dest[i+(j/skip)];
+ for(j = 0; j < ARRAYLEN(Logic1); j += skip) {
+ corr1 += Logic1[j] * dest[i+(j/skip)];
}
- for(j = 0; j < arraylen(FrameEOF); j += skip) {
- corrEOF += FrameEOF[j]*dest[i+(j/skip)];
+ for(j = 0; j < ARRAYLEN(FrameEOF); j += skip) {
+ corrEOF += FrameEOF[j] * dest[i+(j/skip)];
}
// Even things out by the length of the target waveform.
corr0 *= 4;
// DbpString("EOF at %d", i);
break;
} else if(corr1 > corr0) {
- i += arraylen(Logic1)/skip;
+ i += ARRAYLEN(Logic1)/skip;
outBuf[k] |= mask;
} else {
- i += arraylen(Logic0)/skip;
+ i += ARRAYLEN(Logic0)/skip;
}
mask <<= 1;
if(mask == 0) {
k++;
mask = 0x01;
}
- if((i+(int)arraylen(FrameEOF)) >= 2000) {
+ if( ( i + (int)ARRAYLEN(FrameEOF)) >= 2000) {
DbpString("ran off end!");
break;
}
if(mask != 0x01) { // this happens, when we miss the EOF
// TODO: for some reason this happens quite often
if (DEBUG) Dbprintf("error, uneven octet! (extra bits!) mask=%02x", mask);
- if (mask<0x08) k--; // discard the last uneven octet;
+ if (mask < 0x08) k--; // discard the last uneven octet;
// 0x08 is an assumption - but works quite often
}
// uint8_t str1 [8];
for(i = 0; i < k; i++) {
receivedResponse[i] = outBuf[i];
}
- } // "end if correlation > 0" (max/(arraylen(FrameSOF)/skip))
+ } // "end if correlation > 0" (max/(ARRAYLEN(FrameSOF)/skip))
return k; // return the number of bytes demodulated
-
-// DbpString("CRC=%04x", Iso15693Crc(outBuf, k-2));
}
{
uint8_t *dest = BigBuf_get_addr();
- int c = 0;
- int getNext = FALSE;
+ int c = 0, getNext = FALSE;
int8_t prev = 0;
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
// every other is Q. We just want power, so abs(I) + abs(Q) is
// close to what we want.
if(getNext) {
- int8_t r = ABS(b) + ABS(prev);
+ dest[c++] = (uint8_t)ABS(b) + ABS(prev);
- dest[c++] = (uint8_t)r;
-
- if(c >= 20000) {
+ if(c >= 20000)
break;
- }
} else {
prev = b;
}
-
getNext = !getNext;
}
}
/////////// DEMODULATE ///////////////////
//////////////////////////////////////////
- int i, j;
- int max = 0, maxPos=0;
-
- int skip = 4;
-
-// if(GraphTraceLen < 1000) return; // THIS CHECKS FOR A BUFFER TO SMALL
+ int i, j, max = 0, maxPos=0, skip = 4;
// First, correlate for SOF
for(i = 0; i < 19000; i++) {
int corr = 0;
- for(j = 0; j < arraylen(FrameSOF); j += skip) {
+ for(j = 0; j < ARRAYLEN(FrameSOF); j += skip) {
corr += FrameSOF[j]*dest[i+(j/skip)];
}
if(corr > max) {
maxPos = i;
}
}
-// DbpString("SOF at %d, correlation %d", maxPos,max/(arraylen(FrameSOF)/skip));
+// DbpString("SOF at %d, correlation %d", maxPos,max/(ARRAYLEN(FrameSOF)/skip));
int k = 0; // this will be our return value
// greg - If correlation is less than 1 then there's little point in continuing
- if ((max/(arraylen(FrameSOF)/skip)) >= 1) // THIS SHOULD BE 1
+ if ((max/(ARRAYLEN(FrameSOF)/skip)) >= 1) // THIS SHOULD BE 1
{
- i = maxPos + arraylen(FrameSOF)/skip;
+ i = maxPos + ARRAYLEN(FrameSOF)/skip;
uint8_t outBuf[20];
memset(outBuf, 0, sizeof(outBuf));
uint8_t mask = 0x01;
for(;;) {
int corr0 = 0, corr1 = 0, corrEOF = 0;
- for(j = 0; j < arraylen(Logic0); j += skip) {
+ for(j = 0; j < ARRAYLEN(Logic0); j += skip) {
corr0 += Logic0[j]*dest[i+(j/skip)];
}
- for(j = 0; j < arraylen(Logic1); j += skip) {
+ for(j = 0; j < ARRAYLEN(Logic1); j += skip) {
corr1 += Logic1[j]*dest[i+(j/skip)];
}
- for(j = 0; j < arraylen(FrameEOF); j += skip) {
+ for(j = 0; j < ARRAYLEN(FrameEOF); j += skip) {
corrEOF += FrameEOF[j]*dest[i+(j/skip)];
}
// Even things out by the length of the target waveform.
// DbpString("EOF at %d", i);
break;
} else if(corr1 > corr0) {
- i += arraylen(Logic1)/skip;
+ i += ARRAYLEN(Logic1)/skip;
outBuf[k] |= mask;
} else {
- i += arraylen(Logic0)/skip;
+ i += ARRAYLEN(Logic0)/skip;
}
mask <<= 1;
if(mask == 0) {
k++;
mask = 0x01;
}
- if((i+(int)arraylen(FrameEOF)) >= 2000) {
+ if((i+(int)ARRAYLEN(FrameEOF)) >= 2000) {
DbpString("ran off end!");
break;
}
}
if(mask != 0x01) {
DbpString("sniff: error, uneven octet! (discard extra bits!)");
- /// DbpString(" mask=%02x", mask);
+ // DbpString(" mask=%02x", mask);
}
// uint8_t str1 [8];
// itoa(k,str1);
for(i = 0; i < k; i++) {
receivedResponse[i] = outBuf[i];
}
- } // "end if correlation > 0" (max/(arraylen(FrameSOF)/skip))
+ } // "end if correlation > 0" (max/(ARRAYLEN(FrameSOF)/skip))
return k; // return the number of bytes demodulated
-
-/// DbpString("CRC=%04x", Iso15693Crc(outBuf, k-2));
}
{
FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
- int c = 0;
- int getNext = 0;
+ int c = 0, getNext = FALSE;
int8_t prev = 0;
volatile uint32_t r;
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
c = 0;
- getNext = FALSE;
for(;;) {
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY))
AT91C_BASE_SSC->SSC_THR = 0x43;
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
- int8_t b;
- b = (int8_t)AT91C_BASE_SSC->SSC_RHR;
+
+ int8_t b = (int8_t)AT91C_BASE_SSC->SSC_RHR;
// The samples are correlations against I and Q versions of the
// tone that the tag AM-modulates, so every other sample is I,
} else {
prev = b;
}
-
getNext = !getNext;
}
}
{
uint8_t *dest = BigBuf_get_addr();
- int c = 0;
- int getNext = 0;
+ int c = 0, getNext = FALSE;
int8_t prev = 0;
FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
SpinDelay(200);
SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
-
SpinDelay(100);
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
- c = 0;
- getNext = FALSE;
for(;;) {
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
AT91C_BASE_SSC->SSC_THR = 0x43;
// every other is Q. We just want power, so abs(I) + abs(Q) is
// close to what we want.
if(getNext) {
- int8_t r = ABS(b) + ABS(prev);
+ dest[c++] = (uint8_t) ABS(b) + ABS(prev);
- dest[c++] = (uint8_t)r;
-
- if(c >= 7000) {
+ if(c >= 7000)
break;
- }
} else {
prev = b;
}
// thing that you must send to a tag to get a response.
static void BuildIdentifyRequest(void)
{
- uint8_t cmd[5];
-
+ uint8_t cmd[5] = {0,1,0,0,0};
uint16_t crc;
// one sub-carrier, inventory, 1 slot, fast rate
// AFI is at bit 5 (1<<4) when doing an INVENTORY
// uid is in transmission order (which is reverse of display order)
static void BuildReadBlockRequest(uint8_t *uid, uint8_t blockNumber )
{
- uint8_t cmd[13];
-
+ uint8_t cmd[13] = {0,0,0,0,0,0,0,0,0,0,0,0,0};
uint16_t crc;
// If we set the Option_Flag in this request, the VICC will respond with the secuirty status of the block
// followed by teh block data
// Now the VICC>VCD responses when we are simulating a tag
static void BuildInventoryResponse( uint8_t *uid)
{
- uint8_t cmd[12];
-
+ uint8_t cmd[12] = {0,0,0,0,0,0,0,0,0,0,0,0};
uint16_t crc;
// one sub-carrier, inventory, 1 slot, fast rate
// AFI is at bit 5 (1<<4) when doing an INVENTORY
// return: lenght of received data
int SendDataTag(uint8_t *send, int sendlen, int init, int speed, uint8_t **recv) {
- int samples = 0;
- int tsamples = 0;
- int wait = 0;
- int elapsed = 0;
+ int samples = 0, tsamples = 0;
+ int wait = 0, elapsed = 0;
+ int answerLen = 0;
- LED_A_ON();
- LED_B_ON();
- LED_C_OFF();
- LED_D_OFF();
+ LED_A_ON(); LED_B_ON();
+
+ LED_C_OFF(); LED_D_OFF();
if (init) Iso15693InitReader();
- int answerLen=0;
- uint8_t *answer = BigBuf_get_addr() + 3660;
+ // answer is 100bytes long?
+ uint8_t *answer = BigBuf_malloc(100);
if (recv != NULL) memset(answer, 0, 100);
if (!speed) {
LED_A_ON();
LED_B_OFF();
- TransmitTo15693Tag(ToSend,ToSendMax,&tsamples, &wait);
+ TransmitTo15693Tag(ToSend, ToSendMax, &tsamples, &wait);
// Now wait for a response
if (recv!=NULL) {
LED_A_OFF();
LED_B_ON();
answerLen = GetIso15693AnswerFromTag(answer, 100, &samples, &elapsed) ;
- *recv=answer;
+ *recv = answer;
}
LEDsoff();
-
return answerLen;
}
// Decodes a message from a tag and displays its metadata and content
#define DBD15STATLEN 48
void DbdecodeIso15693Answer(int len, uint8_t *d) {
- char status[DBD15STATLEN+1]={0};
+ char status[DBD15STATLEN+1] = {0};
uint16_t crc;
- if (len>3) {
- if (d[0]&(1<<3))
- strncat(status,"ProtExt ",DBD15STATLEN);
- if (d[0]&1) {
+ if (len > 3) {
+ if (d[0] & ( 1 << 3 ))
+ strncat(status, "ProtExt ", DBD15STATLEN);
+ if (d[0] & 1) {
// error
- strncat(status,"Error ",DBD15STATLEN);
+ strncat(status, "Error ", DBD15STATLEN);
switch (d[1]) {
case 0x01:
- strncat(status,"01:notSupp",DBD15STATLEN);
+ strncat(status, "01:notSupp", DBD15STATLEN);
break;
case 0x02:
- strncat(status,"02:notRecog",DBD15STATLEN);
+ strncat(status, "02:notRecog", DBD15STATLEN);
break;
case 0x03:
- strncat(status,"03:optNotSupp",DBD15STATLEN);
+ strncat(status, "03:optNotSupp", DBD15STATLEN);
break;
case 0x0f:
- strncat(status,"0f:noInfo",DBD15STATLEN);
+ strncat(status, "0f:noInfo", DBD15STATLEN);
break;
case 0x10:
- strncat(status,"10:dontExist",DBD15STATLEN);
+ strncat(status, "10:dontExist", DBD15STATLEN);
break;
case 0x11:
- strncat(status,"11:lockAgain",DBD15STATLEN);
+ strncat(status, "11:lockAgain", DBD15STATLEN);
break;
case 0x12:
- strncat(status,"12:locked",DBD15STATLEN);
+ strncat(status, "12:locked", DBD15STATLEN);
break;
case 0x13:
- strncat(status,"13:progErr",DBD15STATLEN);
+ strncat(status, "13:progErr", DBD15STATLEN);
break;
case 0x14:
- strncat(status,"14:lockErr",DBD15STATLEN);
+ strncat(status, "14:lockErr", DBD15STATLEN);
break;
default:
- strncat(status,"unknownErr",DBD15STATLEN);
+ strncat(status, "unknownErr", DBD15STATLEN);
}
- strncat(status," ",DBD15STATLEN);
+ strncat(status ," " ,DBD15STATLEN);
} else {
- strncat(status,"NoErr ",DBD15STATLEN);
+ strncat(status ,"NoErr ", DBD15STATLEN);
}
- crc=Crc(d,len-2);
+ crc = Crc(d,len-2);
if ( (( crc & 0xff ) == d[len-2]) && (( crc >> 8 ) == d[len-1]) )
- strncat(status,"CrcOK",DBD15STATLEN);
+ strncat(status, "CrcOK", DBD15STATLEN);
else
- strncat(status,"CrcFail!",DBD15STATLEN);
+ strncat(status, "CrcFail!", DBD15STATLEN);
- Dbprintf("%s",status);
+ Dbprintf("%s", status);
}
}
-
-
///////////////////////////////////////////////////////////////////////
// Functions called via USB/Client
///////////////////////////////////////////////////////////////////////
void SetDebugIso15693(uint32_t debug) {
- DEBUG=debug;
- Dbprintf("Iso15693 Debug is now %s",DEBUG?"on":"off");
+ DEBUG = debug;
+ Dbprintf("Iso15693 Debug is now %s", DEBUG ? "on" : "off");
return;
}
-
-
//-----------------------------------------------------------------------------
// Simulate an ISO15693 reader, perform anti-collision and then attempt to read a sector
// all demodulation performed in arm rather than host. - greg
FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
- uint8_t *answer1 = BigBuf_get_addr() + 3660;
- uint8_t *answer2 = BigBuf_get_addr() + 3760;
- uint8_t *answer3 = BigBuf_get_addr() + 3860;
+ uint8_t *answer1 = BigBuf_malloc(100);
+ uint8_t *answer2 = BigBuf_malloc(100);
+ uint8_t *answer3 = BigBuf_malloc(100);
// Blank arrays
- memset(answer1, 0x00, 300);
+ memset(answer1, 0x00, 100);
+ memset(answer2, 0x00, 100);
+ memset(answer3, 0x00, 100);
SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
// Setup SSC
// Now wait for a response
answerLen1 = GetIso15693AnswerFromTag(answer1, 100, &samples, &elapsed) ;
- if (answerLen1 >=12) // we should do a better check than this
+ if (answerLen1 >= 12) // we should do a better check than this
{
TagUID[0] = answer1[2];
TagUID[1] = answer1[3];
}
Dbprintf("%d octets read from IDENTIFY request:", answerLen1);
- DbdecodeIso15693Answer(answerLen1,answer1);
- Dbhexdump(answerLen1,answer1,true);
+ DbdecodeIso15693Answer(answerLen1, answer1);
+ Dbhexdump(answerLen1, answer1, true);
// UID is reverse
if (answerLen1>=12)
Dbprintf("%d octets read from SELECT request:", answerLen2);
- DbdecodeIso15693Answer(answerLen2,answer2);
- Dbhexdump(answerLen2,answer2,true);
+ DbdecodeIso15693Answer(answerLen2, answer2);
+ Dbhexdump(answerLen2, answer2, true);
Dbprintf("%d octets read from XXX request:", answerLen3);
DbdecodeIso15693Answer(answerLen3,answer3);
- Dbhexdump(answerLen3,answer3,true);
+ Dbhexdump(answerLen3, answer3, true);
// read all pages
- if (answerLen1>=12 && DEBUG) {
- i=0;
- while (i<32) { // sanity check, assume max 32 pages
+ if (answerLen1 >= 12 && DEBUG) {
+ i = 0;
+ while ( i < 32 ) { // sanity check, assume max 32 pages
BuildReadBlockRequest(TagUID,i);
- TransmitTo15693Tag(ToSend,ToSendMax,&tsamples, &wait);
- answerLen2 = GetIso15693AnswerFromTag(answer2, 100, &samples, &elapsed);
+ TransmitTo15693Tag(ToSend,ToSendMax,&tsamples, &wait);
+ answerLen2 = GetIso15693AnswerFromTag(answer2, 100, &samples, &elapsed);
if (answerLen2>0) {
- Dbprintf("READ SINGLE BLOCK %d returned %d octets:",i,answerLen2);
- DbdecodeIso15693Answer(answerLen2,answer2);
- Dbhexdump(answerLen2,answer2,true);
+ Dbprintf("READ SINGLE BLOCK %d returned %d octets:", i, answerLen2);
+ DbdecodeIso15693Answer(answerLen2, answer2);
+ Dbhexdump(answerLen2, answer2, true);
if ( *((uint32_t*) answer2) == 0x07160101 ) break; // exit on NoPageErr
}
- i++;
+ ++i;
}
}
FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
- uint8_t *buf = BigBuf_get_addr() + 3660;
+ uint8_t *buf = BigBuf_malloc(100);
memset(buf, 0x00, 100);
SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
void BruteforceIso15693Afi(uint32_t speed)
{
uint8_t data[20];
- uint8_t *recv=data;
- int datalen=0, recvlen=0;
-
+ uint8_t *recv = data;
+ int datalen = 0, recvlen = 0;
+
+ memset(data, 0, sizeof(data));
+
Iso15693InitReader();
// first without AFI
// Tags should respond wihtout AFI and with AFI=0 even when AFI is active
- data[0]=ISO15_REQ_SUBCARRIER_SINGLE | ISO15_REQ_DATARATE_HIGH |
- ISO15_REQ_INVENTORY | ISO15_REQINV_SLOT1;
- data[1]=ISO15_CMD_INVENTORY;
- data[2]=0; // mask length
- datalen=AddCrc(data,3);
- recvlen=SendDataTag(data,datalen,0,speed,&recv);
+ data[0] = ISO15_REQ_SUBCARRIER_SINGLE | ISO15_REQ_DATARATE_HIGH |
+ ISO15_REQ_INVENTORY | ISO15_REQINV_SLOT1;
+ data[1] = ISO15_CMD_INVENTORY;
+ data[2] = 0; // mask length
+ datalen = AddCrc(data, 3);
+ recvlen = SendDataTag(data, datalen, 0, speed, &recv);
WDT_HIT();
- if (recvlen>=12) {
- Dbprintf("NoAFI UID=%s",sprintUID(NULL,&recv[2]));
+ if (recvlen >= 12) {
+ Dbprintf("NoAFI UID=%s", sprintUID(NULL, &recv[2]));
}
// now with AFI
- data[0]=ISO15_REQ_SUBCARRIER_SINGLE | ISO15_REQ_DATARATE_HIGH |
- ISO15_REQ_INVENTORY | ISO15_REQINV_AFI | ISO15_REQINV_SLOT1;
- data[1]=ISO15_CMD_INVENTORY;
- data[2]=0; // AFI
- data[3]=0; // mask length
+ data[0] = ISO15_REQ_SUBCARRIER_SINGLE | ISO15_REQ_DATARATE_HIGH |
+ ISO15_REQ_INVENTORY | ISO15_REQINV_AFI | ISO15_REQINV_SLOT1;
+ data[1] = ISO15_CMD_INVENTORY;
+ data[2] = 0; // AFI
+ data[3] = 0; // mask length
- for (int i=0;i<256;i++) {
- data[2]=i & 0xFF;
- datalen=AddCrc(data,4);
- recvlen=SendDataTag(data,datalen,0,speed,&recv);
+ for (int i = 0; i < 256; i++) {
+ data[2] = i & 0xFF; // iceman 2016, is & 0xFF needed?
+ datalen = AddCrc(data, 4);
+ recvlen = SendDataTag(data, datalen, 0, speed, &recv);
WDT_HIT();
- if (recvlen>=12) {
- Dbprintf("AFI=%i UID=%s",i,sprintUID(NULL,&recv[2]));
+ if (recvlen >= 12) {
+ Dbprintf("AFI=%i UID=%s", i, sprintUID(NULL, &recv[2]));
}
}
Dbprintf("AFI Bruteforcing done.");
-
}
// Allows to directly send commands to the tag via the client
void DirectTag15693Command(uint32_t datalen,uint32_t speed, uint32_t recv, uint8_t data[]) {
- int recvlen=0;
+ int recvlen = 0;
uint8_t *recvbuf = BigBuf_get_addr();
-// UsbCommand n;
if (DEBUG) {
Dbprintf("SEND");
Dbhexdump(datalen,data,true);
}
- recvlen=SendDataTag(data,datalen,1,speed,(recv?&recvbuf:NULL));
+ recvlen = SendDataTag(data, datalen, 1, speed, (recv ? &recvbuf : NULL));
if (recv) {
LED_B_ON();
- cmd_send(CMD_ACK,recvlen>48?48:recvlen,0,0,recvbuf,48);
+ cmd_send(CMD_ACK,recvlen>48?48:recvlen,0,0,recvbuf,48);
LED_B_OFF();
if (DEBUG) {
Dbhexdump(recvlen,recvbuf,true);
}
}
-
-}
-
-
-
-
-// --------------------------------------------------------------------
-// -- Misc & deprecated functions
-// --------------------------------------------------------------------
-
-/*
-
-// do not use; has a fix UID
-static void __attribute__((unused)) BuildSysInfoRequest(uint8_t *uid)
-{
- uint8_t cmd[12];
-
- uint16_t crc;
- // If we set the Option_Flag in this request, the VICC will respond with the secuirty status of the block
- // followed by teh block data
- // one sub-carrier, inventory, 1 slot, fast rate
- cmd[0] = (1 << 5) | (1 << 1); // no SELECT bit
- // System Information command code
- cmd[1] = 0x2B;
- // UID may be optionally specified here
- // 64-bit UID
- cmd[2] = 0x32;
- cmd[3]= 0x4b;
- cmd[4] = 0x03;
- cmd[5] = 0x01;
- cmd[6] = 0x00;
- cmd[7] = 0x10;
- cmd[8] = 0x05;
- cmd[9]= 0xe0; // always e0 (not exactly unique)
- //Now the CRC
- crc = Crc(cmd, 10); // the crc needs to be calculated over 2 bytes
- cmd[10] = crc & 0xff;
- cmd[11] = crc >> 8;
-
- CodeIso15693AsReader(cmd, sizeof(cmd));
-}
-
-
-// do not use; has a fix UID
-static void __attribute__((unused)) BuildReadMultiBlockRequest(uint8_t *uid)
-{
- uint8_t cmd[14];
-
- uint16_t crc;
- // If we set the Option_Flag in this request, the VICC will respond with the secuirty status of the block
- // followed by teh block data
- // one sub-carrier, inventory, 1 slot, fast rate
- cmd[0] = (1 << 5) | (1 << 1); // no SELECT bit
- // READ Multi BLOCK command code
- cmd[1] = 0x23;
- // UID may be optionally specified here
- // 64-bit UID
- cmd[2] = 0x32;
- cmd[3]= 0x4b;
- cmd[4] = 0x03;
- cmd[5] = 0x01;
- cmd[6] = 0x00;
- cmd[7] = 0x10;
- cmd[8] = 0x05;
- cmd[9]= 0xe0; // always e0 (not exactly unique)
- // First Block number to read
- cmd[10] = 0x00;
- // Number of Blocks to read
- cmd[11] = 0x2f; // read quite a few
- //Now the CRC
- crc = Crc(cmd, 12); // the crc needs to be calculated over 2 bytes
- cmd[12] = crc & 0xff;
- cmd[13] = crc >> 8;
-
- CodeIso15693AsReader(cmd, sizeof(cmd));
-}
-
-// do not use; has a fix UID
-static void __attribute__((unused)) BuildArbitraryRequest(uint8_t *uid,uint8_t CmdCode)
-{
- uint8_t cmd[14];
-
- uint16_t crc;
- // If we set the Option_Flag in this request, the VICC will respond with the secuirty status of the block
- // followed by teh block data
- // one sub-carrier, inventory, 1 slot, fast rate
- cmd[0] = (1 << 5) | (1 << 1); // no SELECT bit
- // READ BLOCK command code
- cmd[1] = CmdCode;
- // UID may be optionally specified here
- // 64-bit UID
- cmd[2] = 0x32;
- cmd[3]= 0x4b;
- cmd[4] = 0x03;
- cmd[5] = 0x01;
- cmd[6] = 0x00;
- cmd[7] = 0x10;
- cmd[8] = 0x05;
- cmd[9]= 0xe0; // always e0 (not exactly unique)
- // Parameter
- cmd[10] = 0x00;
- cmd[11] = 0x0a;
-
-// cmd[12] = 0x00;
-// cmd[13] = 0x00; //Now the CRC
- crc = Crc(cmd, 12); // the crc needs to be calculated over 2 bytes
- cmd[12] = crc & 0xff;
- cmd[13] = crc >> 8;
-
- CodeIso15693AsReader(cmd, sizeof(cmd));
-}
-
-// do not use; has a fix UID
-static void __attribute__((unused)) BuildArbitraryCustomRequest(uint8_t uid[], uint8_t CmdCode)
-{
- uint8_t cmd[14];
-
- uint16_t crc;
- // If we set the Option_Flag in this request, the VICC will respond with the secuirty status of the block
- // followed by teh block data
- // one sub-carrier, inventory, 1 slot, fast rate
- cmd[0] = (1 << 5) | (1 << 1); // no SELECT bit
- // READ BLOCK command code
- cmd[1] = CmdCode;
- // UID may be optionally specified here
- // 64-bit UID
- cmd[2] = 0x32;
- cmd[3]= 0x4b;
- cmd[4] = 0x03;
- cmd[5] = 0x01;
- cmd[6] = 0x00;
- cmd[7] = 0x10;
- cmd[8] = 0x05;
- cmd[9]= 0xe0; // always e0 (not exactly unique)
- // Parameter
- cmd[10] = 0x05; // for custom codes this must be manufcturer code
- cmd[11] = 0x00;
-
-// cmd[12] = 0x00;
-// cmd[13] = 0x00; //Now the CRC
- crc = Crc(cmd, 12); // the crc needs to be calculated over 2 bytes
- cmd[12] = crc & 0xff;
- cmd[13] = crc >> 8;
-
- CodeIso15693AsReader(cmd, sizeof(cmd));
-}
-
-
-
-
-*/
-
-
+}
\ No newline at end of file
projects / proxmark3-svn / commitdiff