ADD: test_t55x7_psk.lua, a script which writes to block 0 (configation) of a T55x7...

diff --git a/client/scripts/test_t55x7_psk.lua b/client/scripts/test_t55x7_psk.lua
new file mode 100644 (file)
index 0000000..1b96409
--- /dev/null
+++ b/client/scripts/test_t55x7_psk.lua
@@ -0,0 +1,173 @@
+local cmds = require('commands')
+local getopt = require('getopt')
+local bin = require('bin')
+local utils = require('utils')
+local dumplib = require('html_dumplib')
+
+example =[[
+       1. script run tracetest
+       2. script run tracetest -o 
+
+]]
+author = "Iceman"
+usage = "script run test_t55x7_psk -o <filename>"
+desc =[[
+This script will program a T55x7 TAG with the configuration: block 0x00 data 0x00088040
+The outlined procedure is as following:
+
+"lf t55xx write 0 00088040"
+"lf read"
+"data samples"
+"data pskdet"
+"data psknrz"
+"data pskindala"
+"data psknrzraw"
+
+Loop OUTER:
+       change the configuretion block 0 with:
+    -xxxx8xxx = PSK RF/2 with Manchester modulation
+    -xxxx1xxx = PSK RF/2 with PSK1 modulation (phase change when input changes)
+    -xxxx2xxx = PSK RF/2 with PSk2 modulation (phase change on bitclk if input high)
+    -xxxx3xxx = PSK RF/2 with PSk3 modulation (phase change on rising edge of input)
+       Loop INNER
+           for each outer configuration, also do 
+                       XXXXX0XX = PSK RF/2
+                       XXXXX4XX = PSK RF/4
+                       XXXXX8XX = PSK RF/8
+
+In all 12 individual test for the PSK demod
+
+Arguments:
+       -h             : this help
+       -o             : logfile name
+]]
+
+local TIMEOUT = 2000 -- Shouldn't take longer than 2 seconds
+local DEBUG = true -- the debug flag
+
+--BLOCK 0 = 00088040
+local config1 = '0008'
+local config2 = '40'
+       
+local procedurecmds = {
+       [1] = '%s%s%s%s',
+       [2] = 'lf read',
+       --[3] = '',
+       [3] = 'data samples',
+       [4] = 'data pskdetectclock',
+       [5] = 'data psknrzrawdemod',
+       [6] = 'data pskindalademod',
+}
+
+--- 
+-- A debug printout-function
+function dbg(args)
+       if not DEBUG then
+               return
+       end
+       
+    if type(args) == "table" then
+               local i = 1
+               while args[i] do
+                       dbg(args[i])
+                       i = i+1
+               end
+       else
+               print("###", args)
+       end     
+end    
+--- 
+-- This is only meant to be used when errors occur
+function oops(err)
+       print("ERROR: ",err)
+end
+--- 
+-- Usage help
+function help()
+       print(desc)
+       print("Example usage")
+       print(example)
+end
+--
+-- Exit message
+function ExitMsg(msg)
+       print( string.rep('--',20) )
+       print( string.rep('--',20) )
+       print(msg)
+       print()
+end
+
+function pskTest(modulation)
+       local y
+       for y = 0, 8, 4 do
+               for _ = 1, #procedurecmds do
+                       local cmd = procedurecmds[_]
+                       
+                       if #cmd == 0 then  
+                       
+                       elseif _ == 1 then
+
+                               dbg("Writing to T55x7 TAG")
+               
+                               local configdata = cmd:format( config1, modulation , y, config2)
+                               
+                               dbg( configdata)
+                               
+                               local writecommand = Command:new{cmd = cmds.CMD_T55XX_WRITE_BLOCK, arg1 = configdata ,arg2 = 0, arg3 = 0}
+                               local err = core.SendCommand(writecommand:getBytes())
+                               if err then return oops(err) end
+                               local response = core.WaitForResponseTimeout(cmds.CMD_ACK,TIMEOUT)
+
+                               if response then
+                                       local count,cmd,arg0 = bin.unpack('LL',response)
+                                       if(arg0==1) then
+                                               dbg("Writing success")
+                                       else
+                                               return nil, "Couldn't read block.." 
+                                       end
+                               end
+
+                       else
+                               dbg(cmd)
+                               core.console( cmd )
+                       end
+               end
+               core.clearCommandBuffer()       
+       end
+       print( string.rep('--',20) )
+
+end
+
+local function main(args)
+
+       print( string.rep('--',20) )
+       print( string.rep('--',20) )
+
+       local outputTemplate = os.date("testpsk_%Y-%m-%d_%H%M%S")
+
+       -- Arguments for the script
+       for o, arg in getopt.getopt(args, 'ho:') do
+               if o == "h" then return help() end
+               if o == "o" then outputTemplate = arg end               
+       end
+
+       core.clearCommandBuffer()
+
+       pskTest(1)
+       pskTest(2)
+       pskTest(3)
+       pskTest(8)
+       
+       print( string.rep('--',20) )
+end
+main(args)
+
+-- Where it iterates over 
+  -- xxxx8xxx = PSK RF/2 with Manchester modulation
+  -- xxxx1xxx = PSK RF/2 with PSK1 modulation (phase change when input changes)
+  -- xxxx2xxx = PSK RF/2 with PSk2 modulation (phase change on bitclk if input high)
+  -- xxxx3xxx = PSK RF/2 with PSk3 modulation (phase change on rising edge of input)
+
+    -- XXXXX0XX = PSK RF/2
+    -- XXXXX4XX = PSK RF/4
+    -- XXXXX8XX = PSK RF/8
\ No newline at end of file