marshmellow42 [Sun, 23 Jun 2019 11:43:56 +0000 (07:43 -0400)]
add lf em 4x05protect plus lf config s option (#833)
* add "samples to skip" for lf config (mainly for lf snoop)
* add lf em 4x05protect command to write protection on em4x05 chips
* fix spacing
* and remove old comment git added back in..
* update changelog
* fix flags - only need 1 bit
mwalker33 [Sun, 16 Jun 2019 05:35:10 +0000 (15:35 +1000)]
T55xx downlink Modes
Changes :
- Added t55xx downlink protocols (long leading reference, leading 0 and 1 of 4)
- Added function to all read to call differnet downlink functions (to match write)
- Update functions to support using differnet downlink modes.
- Added support for calling downlink modes for lf t55 read, write and detect
- Added new function lf t55 bruteforcedl to support downlink modes as well as try each mode
for each password in password file.
for functions with downlink mode extenstion.
e <mode> - OPTIONAL downlink encoding '0' fixed-bit-length (default),
'1' Long Zero Reference,
'2' Leading Zero,
'3' 1 of 4
pwpiwi [Thu, 6 Jun 2019 05:33:12 +0000 (07:33 +0200)]
upgrading 'hf mfu' (#830)
* chg: write new dump file format by @mceloff
* chg: rename 'hf mfu dump' option 'n' to 'f' to align with other commands and RRG repo
* chg: replace ISO14443A_CMD_READBLOCK by MIFARE_CMD_READBLOCK, same for WRITEBLOCK
* fix: mifare_ultra_readblock() returned 14 bytes instead of 16
* chg: param_gethex_ex() now checks maximum output buffer length
* chg: ul_comp_write() was incomplete and for magic testing only
* fix: 16bit ULC counter had been displayed as 32bit
* chg: add check for 7 Byte UID, drop check for ATQA in type identification GetHF14AMfU_Type()
* fix: send HALT instead of dropping field in order to maintain a defined state
* chg: DropField() when command ends
* chg: check for invalid page ranges in 'hf mfu dump'
* fix: print correct lock bits when page range is used
* fix: do not write (incomplete) dumpfile when page range is used
* add: use UID for filename when no filename is given (RRG repo)
* chg: don't clear trace on each ULC authentication, clear trace at beginning of each command
* fix: don't send (DESFire?) deselect command after authentication
* fix parity encryption (thanks to Eloff, http://www.proxmark.org/forum/viewtopic.php?id=6347)
* add support to simulate Mifare Mini, Mifare 2K and Mifare 4K
* change to standard LED handling (A: PM is working, B: reader is sending, C: tag is responding, D: HF field is on)
* NAK on unknown commands
* allow unencrypted HALT
* don't display messages during simulation (or we will miss next reader command)
* use DMA to receive reader command
* switch earlier from send to listen mode
* move ADC initializer to iso14443_setup
* remove remainders of incomplete Mifare 10Byte UID simulation
* show 'short' bytes (7Bits or 8Bits without parity) in 'hf list mf' and 'hf list 14a'
* whitespace
pwpiwi [Sun, 24 Mar 2019 17:11:41 +0000 (18:11 +0100)]
FPGA changes (#803)
* merge hf_rx_xcorr and hf_tx modes into one module with common ssp_clk and ssp_frame
* get rid of most of the warnings when compiling the HF verilog sources
* refactoring the constants in Verilog sources
pwpiwi [Wed, 20 Feb 2019 18:18:12 +0000 (19:18 +0100)]
Add raw HF signal plotting (#786)
* Add raw HF signal plotting
* new fpga module hi_get_trace.v - store A/D converter output to circular buffer on FPGA
* new command 'hf plot' - pull data from FPGA and display it in Graph Window
pwpiwi [Sat, 16 Feb 2019 16:51:04 +0000 (17:51 +0100)]
add tracing functions (#784)
* add trace buffer for PCSC smartcard readers
* new option 'p' in 'hf list' to select PCSC trace buffer
* 'sc list' now supports PCSC smartcard readers
* add 'hf list 14-4' for ISO 14443-4 protocol
pwpiwi [Sat, 9 Feb 2019 14:15:17 +0000 (15:15 +0100)]
emv/sc fixes and modifications: (#780)
* print selected Smartcard Reader in PrintChannel()
* implement 'sc sel <readername>'. Readername can include wildcards * and ?
* fixing EMV APDU exchange (again)
* use EMVExchangeEx() instead of EMVExchange() in fidocore.c
pwpiwi [Fri, 1 Feb 2019 20:12:20 +0000 (21:12 +0100)]
Adding support for standard USB Smartcard Readers (#769)
* add PCSC reader support to 'sc raw' and all 'emv' commands
* move all APDU -> TPDU mapping to ExchangeAPDUSC()
* print "PSE" instead of "PPSE" when using contact interface
* fix some #defines in protocols.h
* DropField only when using contactless
* some refactoring
pwpiwi [Mon, 28 Jan 2019 20:54:34 +0000 (21:54 +0100)]
Add support for standard USB Smartcard Readers (#765)
* add PCSC interface (pcsc.c and pcsc.h)
* new command 'sc select' to choose an USB Smartcard Reader
* updated CI/.travis.yml accordingly
* remove TCK CRC check in i2c.c It is done in PrintATR() anyway
* Fix TCK CRC check in PrintATR()
* Add PCSC reader support to 'sc info'
pwpiwi [Sat, 12 Jan 2019 12:28:26 +0000 (13:28 +0100)]
Fix 15 snoop (#752)
* fixing hf 15: implement hf 15 snoop
* rename hf 15 record to hf 15 snoop
* speedup sampling / decoding:
* new FPGA mode FPGA_HF_READER_RX_XCORR_AMPLITUDE implements amplitude(ci, cq) on FPGA
* inlining the decoders in iso15693.c
* inlining memcpy/memset in LogTrace()
* giving up the moving correlator for SOF in Handle15693SamplesFromTag
* decode more of EOF in Handle15693SamplesFromTag()
* some refactoring
This involves a refactor to the arm HID code to allow for arbitrary
preambles (such as HID Proximity and Paradox).
The client also borrows from the HID code, but is not shared, so could
use a significant refactor in the future.
On ChromeOS Linux apps can't access serial port but they can connect to TCP,
so I wrote a simple app to forward TCP to serial. I suppose this can
have other uses as well.
florianrock [Fri, 30 Nov 2018 16:42:22 +0000 (17:42 +0100)]
HitagS Improvements (#721)
* support of HITAG S standard communication mode
* fixed wrong AC (Anti Collision) decoding
* support of block read mode
* fixed wrong uid send when using simulation
* support of communication mode parameter (client is backward compatible)
* support of start-page parameter (important for some weird tags) (client is backward compatible)
* also expect pages if tag memory size in con0 is 11 (we got some tags)
* corrected hitagS reader cmd help
Oleg Moiseenko [Mon, 19 Nov 2018 08:02:38 +0000 (10:02 +0200)]
move from polarssl to mbedtls (#708)
* update polarssl to mbedtls
* fix a warning in armsrc/iso15693
* added random generator and ecdsa test
* added signature check to test
* move crypto lib to client directory
projects / proxmark3-svn / log