increase memory, change pci id

[raggedstone] / dhwk / source / pci / parity.vhd

-- VHDL model created from schematic parity.sch -- Jan 09 09:34:12 2007

LIBRARY ieee;
USE ieee.std_logic_1164.ALL;
USE ieee.numeric_std.ALL;

entity PARITY is
        Port ( OE_PCI_PAR : In std_logic;
               OE_PCI_PERR : In std_logic;
               PA_ER_RE : In std_logic;
               PAR_IN : In std_logic_vector (35 downto 0);
               PAR_REG : In std_logic;
               PCI_CLOCK : In std_logic;
               PCI_RSTn : In std_logic;
               PERR_CHECK : In std_logic;
               SERR_CHECK : In std_logic;
               SERR_ENA : In std_logic;
               PCI_PAR : InOut std_logic;
               PCI_PERRn : Out std_logic;
               PCI_SERRn : Out std_logic;
               PERR : Out std_logic;
               SERR : Out std_logic );
end PARITY;

architecture SCHEMATIC of PARITY is

        SIGNAL gnd : std_logic := '0';
        SIGNAL vcc : std_logic := '1';

        signal PAR_OUT : std_logic_vector (10 downto 0);

        component PARITY_OUT
                Port ( OE_PCI_PAR : In std_logic;
                       OE_PCI_PERR : In std_logic;
                       PA_ER_RE : In std_logic;
                       PAR_IN : In std_logic_vector (2 downto 0);
                       PAR_REG : In std_logic;
                       PCI_CLOCK : In std_logic;
                       PCI_PAR_IN : In std_logic;
                       PCI_RSTn : In std_logic;
                       PERR_CHECK : In std_logic;
                       SERR_CHECK : In std_logic;
                       SERR_ENA : In std_logic;
                       PCI_PAR : Out std_logic;
                       PCI_PERRn : Out std_logic;
                       PCI_SERRn : Out std_logic;
                       PERR : Out std_logic;
                       SERR : Out std_logic );
        end component;

        component PARITY_4
                Port ( PAR_IN : In std_logic_vector (3 downto 0);
                       PAR_OUT : Out std_logic );
        end component;

begin

        I12 : PARITY_OUT
        Port Map ( OE_PCI_PAR=>OE_PCI_PAR, OE_PCI_PERR=>OE_PCI_PERR,
                   PA_ER_RE=>PA_ER_RE,
                   PAR_IN(2 downto 0)=>PAR_OUT(10 downto 8),
                   PAR_REG=>PAR_REG, PCI_CLOCK=>PCI_CLOCK,
                   PCI_PAR_IN=>PCI_PAR, PCI_RSTn=>PCI_RSTn,
                   PERR_CHECK=>PERR_CHECK, SERR_CHECK=>SERR_CHECK,
                   SERR_ENA=>SERR_ENA, PCI_PAR=>PCI_PAR,
                   PCI_PERRn=>PCI_PERRn, PCI_SERRn=>PCI_SERRn, PERR=>PERR,
                   SERR=>SERR );
        I9 : PARITY_4
        Port Map ( PAR_IN(3 downto 0)=>PAR_IN(35 downto 32),
                   PAR_OUT=>PAR_OUT(8) );
        I11 : PARITY_4
        Port Map ( PAR_IN(3 downto 0)=>PAR_OUT(7 downto 4),
                   PAR_OUT=>PAR_OUT(10) );
        I8 : PARITY_4
        Port Map ( PAR_IN(3 downto 0)=>PAR_IN(31 downto 28),
                   PAR_OUT=>PAR_OUT(7) );
        I7 : PARITY_4
        Port Map ( PAR_IN(3 downto 0)=>PAR_IN(27 downto 24),
                   PAR_OUT=>PAR_OUT(6) );
        I6 : PARITY_4
        Port Map ( PAR_IN(3 downto 0)=>PAR_IN(23 downto 20),
                   PAR_OUT=>PAR_OUT(5) );
        I5 : PARITY_4
        Port Map ( PAR_IN(3 downto 0)=>PAR_IN(19 downto 16),
                   PAR_OUT=>PAR_OUT(4) );
        I4 : PARITY_4
        Port Map ( PAR_IN(3 downto 0)=>PAR_IN(15 downto 12),
                   PAR_OUT=>PAR_OUT(3) );
        I3 : PARITY_4
        Port Map ( PAR_IN(3 downto 0)=>PAR_IN(11 downto 8),
                   PAR_OUT=>PAR_OUT(2) );
        I2 : PARITY_4
        Port Map ( PAR_IN(3 downto 0)=>PAR_IN(7 downto 4),
                   PAR_OUT=>PAR_OUT(1) );
        I1 : PARITY_4
        Port Map ( PAR_IN(3 downto 0)=>PAR_IN(3 downto 0),
                   PAR_OUT=>PAR_OUT(0) );
        I10 : PARITY_4
        Port Map ( PAR_IN(3 downto 0)=>PAR_OUT(3 downto 0),
                   PAR_OUT=>PAR_OUT(9) );

end SCHEMATIC;