9e807fa51342a4b1f7c22f1f97b5d98fde126acc
[raggedstone] / dhwk / source / config_10h.vhd
1 -- J.STELZNER
2 -- INFORMATIK-3 LABOR
3 -- 23.08.2006
4 -- File: CONFIG_10H.VHD
5
6 library IEEE;
7 use IEEE.std_logic_1164.all;
8
9 entity CONFIG_10H is
10 port
11 (
12 PCI_CLOCK :in std_logic;
13 PCI_RSTn :in std_logic;
14 AD_REG :in std_logic_vector(31 downto 0);
15 CBE_REGn :in std_logic_vector( 3 downto 0);
16 CONF_WR_10H :in std_logic;
17 CONF_DATA_10H :out std_logic_vector(31 downto 0)
18 );
19 end entity CONFIG_10H;
20
21 architecture CONFIG_10H_DESIGN of CONFIG_10H is
22
23 signal CONF_BAS_ADDR_REG :std_logic_vector(31 downto 0);
24
25 begin
26
27 --*******************************************************************
28 --***** PCI Configuration Space Header "BASE ADDRESS REGISTER" ******
29 --*******************************************************************
30
31 CONF_BAS_ADDR_REG(1 downto 0) <= "01" ;-- Base Address Register for "I/O"
32 CONF_BAS_ADDR_REG(3 downto 2) <= "00" ;-- IO Bereich = 16 BYTE
33
34 process (PCI_CLOCK,PCI_RSTn)
35 begin
36
37 -- if PCI_RSTn = '0' then CONF_BAS_ADDR_REG(31 downto 2) <= (others =>'0');
38 if PCI_RSTn = '0' then CONF_BAS_ADDR_REG(31 downto 4) <= (others =>'0');
39
40 elsif (PCI_CLOCK'event and PCI_CLOCK = '1') then
41
42 if CONF_WR_10H = '1'and CBE_REGn(3) = '0' then
43
44 CONF_BAS_ADDR_REG(31 downto 24) <= AD_REG(31 downto 24);
45
46 else CONF_BAS_ADDR_REG(31 downto 24) <= CONF_BAS_ADDR_REG(31 downto 24);
47 end if;
48
49 if CONF_WR_10H = '1'and CBE_REGn(2) = '0' then
50
51 CONF_BAS_ADDR_REG(23 downto 16) <= AD_REG(23 downto 16);
52
53 else CONF_BAS_ADDR_REG(23 downto 16) <= CONF_BAS_ADDR_REG(23 downto 16);
54 end if;
55
56 if CONF_WR_10H = '1'and CBE_REGn(1) = '0' then
57
58 CONF_BAS_ADDR_REG(15 downto 8) <= AD_REG(15 downto 8);
59
60 else CONF_BAS_ADDR_REG(15 downto 8) <= CONF_BAS_ADDR_REG(15 downto 8);
61 end if;
62
63 -- if CONF_WR_10H = '1'and CBE_REGn(0) = '0' then
64 --
65 -- CONF_BAS_ADDR_REG( 7 downto 2) <= AD_REG( 7 downto 2);
66 --
67 -- else CONF_BAS_ADDR_REG( 7 downto 2) <= CONF_BAS_ADDR_REG( 7 downto 2);
68 -- end if;
69
70 if CONF_WR_10H = '1'and CBE_REGn(0) = '0' then
71
72 CONF_BAS_ADDR_REG( 7 downto 4) <= AD_REG( 7 downto 4);
73
74 else CONF_BAS_ADDR_REG( 7 downto 4) <= CONF_BAS_ADDR_REG( 7 downto 4);
75 end if;
76
77
78 end if;
79
80 end process;
81
82 CONF_DATA_10H <= CONF_BAS_ADDR_REG;
83
84 end architecture CONFIG_10H_DESIGN;
85
86
87
Impressum, Datenschutz