git.zerfleddert.de Git - raggedstone/blob - xps/raggedstone.mhs

   1 # ##############################################################################
   2 # Created by Base System Builder Wizard for Xilinx EDK 8.2.02 Build EDK_Im_Sp2.4
   3 # Thu Mar 22 21:42:23 2007
   4 # Target Board:  Custom
   5 # Family:        spartan3
   6 # Device:        xc3s1500
   7 # Package:       fg456
   8 # Speed Grade:   -4
   9 # Processor: Microblaze
  10 # System clock frequency: 50.000000 MHz
  11 # Debug interface: On-Chip HW Debug Module
  12 # On Chip Memory :  64 KB
  13 # ##############################################################################
  14
  15
  16  PARAMETER VERSION = 2.1.0
  17
  18
  19  PORT fpga_0_RS232_req_to_send_pin = net_gnd, DIR = O
  20  PORT fpga_0_RS232_RX_pin = fpga_0_RS232_RX, DIR = I
  21  PORT fpga_0_RS232_TX_pin = fpga_0_RS232_TX, DIR = O
  22  PORT sys_clk_pin = dcm_clk_s, DIR = I, SIGIS = CLK, CLK_FREQ = 50000000
  23  PORT sys_rst_pin = sys_rst_s, DIR = I, RST_POLARITY = 0, SIGIS = RST
  24  PORT RS232foff = net_vcc, DIR = O
  25  PORT LED_out = GPIO_LED_out, VEC = [0:3], DIR = O
  26  PORT MEM_FLASH_DQ = FLASH_DQ, DIR = IO, VEC = [7:0]
  27  PORT MEM_FLASH_ADDR = FLASH_ADDR, DIR = O, VEC = [18:0]
  28  PORT MEM_FLASH_CE = FLASH_CEN, DIR = O, VEC = [0:0]
  29  PORT MEM_FLASH_OE = FLASH_OEN, DIR = O, VEC = [0:0]
  30  PORT MEM_FLASH_WE = FLASH_WEN, DIR = O
  31  PORT SEVENSEG_out = GPIO_7SEG_OUT, DIR = O, VEC = [0:12]
  32  PORT DBG_FLASH_ADDR = FLASH_ADDR_split, DIR = O, VEC = [0:31]
  33
  34
  35 BEGIN microblaze
  36  PARAMETER INSTANCE = microblaze_0
  37  PARAMETER HW_VER = 4.00.b
  38  PARAMETER C_USE_FPU = 0
  39  PARAMETER C_DEBUG_ENABLED = 1
  40  PARAMETER C_NUMBER_OF_PC_BRK = 2
  41  PARAMETER C_FSL_DATA_SIZE = 32
  42  PARAMETER C_NUMBER_OF_RD_ADDR_BRK = 0
  43  PARAMETER C_NUMBER_OF_WR_ADDR_BRK = 0
  44  BUS_INTERFACE DLMB = dlmb
  45  BUS_INTERFACE ILMB = ilmb
  46  BUS_INTERFACE DOPB = mb_opb
  47  BUS_INTERFACE IOPB = mb_opb
  48  PORT DBG_CAPTURE = DBG_CAPTURE_s
  49  PORT DBG_CLK = DBG_CLK_s
  50  PORT DBG_REG_EN = DBG_REG_EN_s
  51  PORT DBG_TDI = DBG_TDI_s
  52  PORT DBG_TDO = DBG_TDO_s
  53  PORT DBG_UPDATE = DBG_UPDATE_s
  54 END
  55
  56 BEGIN opb_v20
  57  PARAMETER INSTANCE = mb_opb
  58  PARAMETER HW_VER = 1.10.c
  59  PARAMETER C_EXT_RESET_HIGH = 0
  60  PORT SYS_Rst = sys_rst_s
  61  PORT OPB_Clk = sys_clk_s
  62 END
  63
  64 BEGIN opb_mdm
  65  PARAMETER INSTANCE = debug_module
  66  PARAMETER HW_VER = 2.00.a
  67  PARAMETER C_MB_DBG_PORTS = 1
  68  PARAMETER C_USE_UART = 0
  69  PARAMETER C_BASEADDR = 0x41400000
  70  PARAMETER C_HIGHADDR = 0x4140ffff
  71  BUS_INTERFACE SOPB = mb_opb
  72  PORT DBG_CAPTURE_0 = DBG_CAPTURE_s
  73  PORT DBG_CLK_0 = DBG_CLK_s
  74  PORT DBG_REG_EN_0 = DBG_REG_EN_s
  75  PORT DBG_TDI_0 = DBG_TDI_s
  76  PORT DBG_TDO_0 = DBG_TDO_s
  77  PORT DBG_UPDATE_0 = DBG_UPDATE_s
  78 END
  79
  80 BEGIN lmb_v10
  81  PARAMETER INSTANCE = ilmb
  82  PARAMETER HW_VER = 1.00.a
  83  PARAMETER C_EXT_RESET_HIGH = 0
  84  PORT SYS_Rst = sys_rst_s
  85  PORT LMB_Clk = sys_clk_s
  86 END
  87
  88 BEGIN lmb_v10
  89  PARAMETER INSTANCE = dlmb
  90  PARAMETER HW_VER = 1.00.a
  91  PARAMETER C_EXT_RESET_HIGH = 0
  92  PORT SYS_Rst = sys_rst_s
  93  PORT LMB_Clk = sys_clk_s
  94 END
  95
  96 BEGIN lmb_bram_if_cntlr
  97  PARAMETER INSTANCE = dlmb_cntlr
  98  PARAMETER HW_VER = 1.00.b
  99  PARAMETER C_BASEADDR = 0x00000000
 100  PARAMETER C_HIGHADDR = 0x00007FFF
 101  BUS_INTERFACE SLMB = dlmb
 102  BUS_INTERFACE BRAM_PORT = dlmb_port
 103 END
 104
 105 BEGIN lmb_bram_if_cntlr
 106  PARAMETER INSTANCE = ilmb_cntlr
 107  PARAMETER HW_VER = 1.00.b
 108  PARAMETER C_BASEADDR = 0x00000000
 109  PARAMETER C_HIGHADDR = 0x00007FFF
 110  BUS_INTERFACE SLMB = ilmb
 111  BUS_INTERFACE BRAM_PORT = ilmb_port
 112 END
 113
 114 BEGIN bram_block
 115  PARAMETER INSTANCE = lmb_bram
 116  PARAMETER HW_VER = 1.00.a
 117  BUS_INTERFACE PORTA = ilmb_port
 118  BUS_INTERFACE PORTB = dlmb_port
 119 END
 120
 121 BEGIN opb_uartlite
 122  PARAMETER INSTANCE = RS232
 123  PARAMETER HW_VER = 1.00.b
 124  PARAMETER C_BAUDRATE = 115200
 125  PARAMETER C_DATA_BITS = 8
 126  PARAMETER C_ODD_PARITY = 1
 127  PARAMETER C_USE_PARITY = 0
 128  PARAMETER C_CLK_FREQ = 50000000
 129  PARAMETER C_BASEADDR = 0x40600000
 130  PARAMETER C_HIGHADDR = 0x4060ffff
 131  BUS_INTERFACE SOPB = mb_opb
 132  PORT RX = fpga_0_RS232_RX
 133  PORT TX = fpga_0_RS232_TX
 134 END
 135
 136 BEGIN dcm_module
 137  PARAMETER INSTANCE = dcm_0
 138  PARAMETER HW_VER = 1.00.a
 139  PARAMETER C_CLK0_BUF = TRUE
 140  PARAMETER C_CLKIN_PERIOD = 20.000000
 141  PARAMETER C_CLK_FEEDBACK = 1X
 142  PARAMETER C_DLL_FREQUENCY_MODE = LOW
 143  PARAMETER C_EXT_RESET_HIGH = 1
 144  PORT CLKIN = dcm_clk_s
 145  PORT CLK0 = sys_clk_s
 146  PORT CLKFB = sys_clk_s
 147  PORT RST = net_gnd
 148  PORT LOCKED = dcm_0_lock
 149 END
 150
 151 BEGIN opb_gpio
 152  PARAMETER INSTANCE = LEDS
 153  PARAMETER HW_VER = 3.01.b
 154  PARAMETER C_GPIO_WIDTH = 4
 155  PARAMETER C_IS_BIDIR = 0
 156  PARAMETER C_BASEADDR = 0x40020000
 157  PARAMETER C_HIGHADDR = 0x4002ffff
 158  BUS_INTERFACE SOPB = mb_opb
 159  PORT GPIO_d_out = GPIO_LED_out
 160 END
 161
 162 BEGIN opb_emc
 163  PARAMETER INSTANCE = FLASH
 164  PARAMETER HW_VER = 2.00.a
 165  PARAMETER C_NUM_BANKS_MEM = 1
 166  PARAMETER C_MAX_MEM_WIDTH = 8
 167  PARAMETER C_MEM0_WIDTH = 8
 168  PARAMETER C_TCEDV_PS_MEM_0 = 70000
 169  PARAMETER C_TAVDV_PS_MEM_0 = 70000
 170  PARAMETER C_THZCE_PS_MEM_0 = 25000
 171  PARAMETER C_TWC_PS_MEM_0 = 110000
 172  PARAMETER C_TWP_PS_MEM_0 = 70000
 173  PARAMETER C_TLZWE_PS_MEM_0 = 15000
 174  PARAMETER C_OPB_CLK_PERIOD_PS = 20000
 175  PARAMETER C_THZOE_PS_MEM_0 = 25000
 176  PARAMETER C_INCLUDE_DATAWIDTH_MATCHING_0 = 1
 177  PARAMETER C_MEM0_BASEADDR = 0x20000000
 178  PARAMETER C_MEM0_HIGHADDR = 0x2007FFFF
 179  PARAMETER C_INCLUDE_NEGEDGE_IOREGS = 0
 180  BUS_INTERFACE SOPB = mb_opb
 181  PORT Mem_A = FLASH_ADDR_split
 182  PORT Mem_CEN = FLASH_CEN
 183  PORT Mem_OEN = FLASH_OEN
 184  PORT Mem_WEN = FLASH_WEN
 185  PORT Mem_DQ = FLASH_DQ
 186 END
 187
 188 BEGIN opb_gpio
 189  PARAMETER INSTANCE = SEVENSEG
 190  PARAMETER HW_VER = 3.01.b
 191  PARAMETER C_GPIO_WIDTH = 13
 192  PARAMETER C_BASEADDR = 0x40000000
 193  PARAMETER C_HIGHADDR = 0x4000ffff
 194  BUS_INTERFACE SOPB = mb_opb
 195  PORT GPIO_d_out = GPIO_7SEG_OUT
 196 END
 197
 198 BEGIN chipscope_icon
 199  PARAMETER INSTANCE = chipscope_icon_0
 200  PARAMETER HW_VER = 1.01.a
 201  PORT control0 = ila_control0
 202 END
 203
 204 BEGIN chipscope_ila
 205  PARAMETER INSTANCE = chipscope_ila_0
 206  PARAMETER HW_VER = 1.01.a
 207  PARAMETER C_NUM_DATA_SAMPLES = 1024
 208  PARAMETER C_TRIG0_TRIGGER_IN_WIDTH = 19
 209  PARAMETER C_TRIG1_UNITS = 0
 210  PARAMETER C_TRIG2_UNITS = 0
 211  PARAMETER C_TRIG0_UNITS = 1
 212  PORT CHIPSCOPE_ILA_CONTROL = ila_control0
 213  PORT CLK = sys_clk_s
 214  PORT TRIG0 = FLASH_ADDR
 215 END
 216
 217 BEGIN util_bus_split
 218  PARAMETER INSTANCE = flash_split
 219  PARAMETER HW_VER = 1.00.a
 220  PARAMETER C_SIZE_IN = 32
 221  PARAMETER C_SPLIT = 13
 222  PORT Sig = FLASH_ADDR_split
 223  PORT Out2 = FLASH_ADDR
 224 END
 225