]> git.zerfleddert.de Git - raggedstone/blob - dhwk/source/pci/interrupt.vhd
5d3b4734d46ee8ae8b2c5051579371c97ffae3eb
[raggedstone] / dhwk / source / pci / interrupt.vhd
1 -- J.STELZNER
2 -- INFORMATIK-3 LABOR
3 -- 23.08.2006
4 -- File: INTERRUPT.VHD
5
6 library ieee;
7 use ieee.std_logic_1164.all;
8
9 entity INTERRUPT is
10 port
11 (
12 PCI_CLOCK :in std_logic;
13 PCI_RSTn :in std_logic; -- PCI reset is asynchron (low active)
14 RESET :in std_logic;
15 TAST_SETn :in std_logic;
16 TAST_RESn :in std_logic;
17 INT_IN_0 :in std_logic;
18 INT_IN_1 :in std_logic;
19 INT_IN_2 :in std_logic;
20 INT_IN_3 :in std_logic;
21 INT_IN_4 :in std_logic;
22 INT_IN_5 :in std_logic;
23 INT_IN_6 :in std_logic;
24 INT_IN_7 :in std_logic;
25 TRDYn :in std_logic; -- event 1 after read of Interrupt status register (low active)
26 READ_XX5_4 :in std_logic; -- event 2 after read of Interrupt status register
27 INT_RES :in std_logic_vector(7 downto 0); -- clear selected interrupts
28 INT_MASKE :in std_logic_vector(7 downto 0); -- interrupt mask register
29 INT_REG :out std_logic_vector(7 downto 0); -- interrupt status register
30 INTAn :out std_logic; -- second interrupt line for PCI analyzer
31 PCI_INTAn :out std_logic -- PCI interrupt line
32 );
33
34 end entity INTERRUPT;
35
36 architecture INTERRUPT_DESIGN of INTERRUPT is
37
38 signal SIG_TAST_Q :std_logic;
39 signal SIG_TAST_Qn :std_logic;
40
41
42 signal SIG_INTA :std_logic;
43
44 signal FF_A :std_logic_vector(7 downto 0);
45 signal FF_B :std_logic_vector(7 downto 0);
46 signal SET :std_logic_vector(7 downto 0);
47
48 signal SIG_PROPAGATE_INT :std_logic;
49 signal SIG_PROPAGATE_INT_SECOND :std_logic;
50 signal REG :std_logic_vector(7 downto 0);
51
52 begin
53
54
55
56
57 ------------------------------------------------------
58 process (PCI_CLOCK)
59 begin
60 if (PCI_CLOCK'event and PCI_CLOCK ='1') then
61
62 -- THIS IS BROKEN (it cycles the interrupt)
63 SIG_TAST_Q <= not (TAST_SETn and SIG_TAST_Qn);
64 SIG_TAST_Qn <= not (TAST_RESn and SIG_TAST_Q);
65
66 end if;
67 end process;
68
69 ------------------------------------------------------
70
71 process (PCI_CLOCK)
72 begin
73 if (PCI_RSTn = '0') then
74 SET <= "00000000";
75 FF_A <= "00000000";
76 FF_B <= "00000000";
77
78 elsif (rising_edge(PCI_CLOCK)) then
79 if (RESET = '1') then
80 SET <= "00000000";
81 FF_A <= "00000000";
82 FF_B <= "00000000";
83 else
84 FF_A(0) <= INT_IN_0; -- Receive FIFO Empty Flag
85
86 FF_A(1) <= INT_IN_1; -- Send FIFO Half Full
87 FF_A(2) <= INT_IN_2;
88 FF_A(3) <= INT_IN_3;
89
90 FF_A(4) <= INT_IN_4;
91
92 FF_A(5) <= INT_IN_5;
93 FF_A(6) <= INT_IN_6;
94 FF_A(7) <= INT_IN_7;
95
96 FF_B <= FF_A;
97
98 SET <= FF_A AND not FF_B;
99 end if;
100 end if;
101 end process;
102
103 process (PCI_CLOCK,PCI_RSTn)
104 begin
105 if (PCI_RSTn = '0') then
106 REG <= "00000000";
107
108 elsif(rising_edge(PCI_CLOCK)) then
109 if(RESET = '1') then
110 REG <= "00000000";
111
112 -- elsif(SIG_TAST_Q = '1') then
113 -- REG <= "00000000" or SET;
114
115 elsif (TRDYn = '0' AND READ_XX5_4 = '1') then
116 REG <= (REG AND NOT INT_RES) OR SET;
117 else
118 REG <= REG OR SET;
119 end if;
120 end if;
121 end process;
122
123 SIG_PROPAGATE_INT <= (not TAST_SETn)
124 OR (REG(0) AND INT_MASKE(0))
125 OR (REG(1) AND INT_MASKE(1))
126 OR (REG(2) AND INT_MASKE(2))
127 OR (REG(3) AND INT_MASKE(3))
128 OR (REG(4) AND INT_MASKE(4))
129 OR (REG(5) AND INT_MASKE(5))
130 OR (REG(6) AND INT_MASKE(6))
131 OR (REG(7) AND INT_MASKE(7));
132
133 process (PCI_CLOCK)
134 begin
135 if(rising_edge(PCI_CLOCK)) then
136 SIG_PROPAGATE_INT_SECOND <= not SIG_PROPAGATE_INT;
137 end if;
138 end process;
139
140 INTAn <= not SIG_PROPAGATE_INT_SECOND;
141 PCI_INTAn <= '0' when SIG_PROPAGATE_INT_SECOND = '0' else 'Z';
142 INT_REG <= REG;
143
144 end architecture INTERRUPT_DESIGN;
Impressum, Datenschutz