+++ /dev/null
--- $Id: SER_PAR_CON.vhd,v 1.2 2007-03-11 08:04:56 sithglan Exp $
-
-library ieee;
-use ieee.std_logic_1164.all;
-use ieee.std_logic_unsigned.all;
-
-entity SER_PAR_CON is
- port
- (
- PCI_CLOCK :in std_logic;
- RESET :in std_logic;
- SPC_ENABLE :in std_logic; -- Driver Enable Sender/Receiver
- SYNC_R_FIFO_FFn :in std_logic; -- FIFO Full Flag (low active)
- SERIAL_IN :in std_logic; -- Serial Input
- R_FIFO_WRITEn :out std_logic; -- FIFO Write (low active)
- SPC_RDY_OUT :out std_logic; -- Ready to Receive Data
- PAR_OUT :out std_logic_vector(7 downto 0)
- );
-end entity SER_PAR_CON ;
-
-
-architecture SER_PAR_CON_DESIGN of SER_PAR_CON is
-
--- constant STATE_RECV :std_logic_vector(3 downto 0) := "0001";
-constant STATE_RECV_START_BIT :std_logic_vector(3 downto 0) := "0010";
-constant STATE_RECV_BIT_0 :std_logic_vector(3 downto 0) := "0011";
-constant STATE_RECV_BIT_1 :std_logic_vector(3 downto 0) := "0100";
-constant STATE_RECV_BIT_2 :std_logic_vector(3 downto 0) := "0101";
-constant STATE_RECV_BIT_3 :std_logic_vector(3 downto 0) := "0110";
-constant STATE_RECV_BIT_4 :std_logic_vector(3 downto 0) := "0111";
-constant STATE_RECV_BIT_5 :std_logic_vector(3 downto 0) := "1000";
-constant STATE_RECV_BIT_6 :std_logic_vector(3 downto 0) := "1001";
-constant STATE_RECV_BIT_7 :std_logic_vector(3 downto 0) := "1010";
-constant STATE_RECV_FIFOFULL :std_logic_vector(3 downto 0) := "1011";
-
-signal COUNT :std_logic_vector (3 downto 0);
-signal STATE :std_logic_vector (3 downto 0);
-signal STARTBIT :std_logic_vector (3 downto 0);
-
-
-attribute syn_state_machine:boolean;
-attribute syn_state_machine of STATE: signal is false;
-attribute syn_state_machine of COUNT: signal is false;
-
-begin
-
-process(PCI_CLOCK)
-begin
- if (PCI_CLOCK'event and PCI_CLOCK = '1') then
- if ("0000" < COUNT) then
- COUNT <= COUNT - 1;
- end if;
-
--- war nicht das Problem des Datenverlusts
--- if (R_FIFO_WRITEn = '0' and COUNT = "0000") then
--- R_FIFO_WRITEn <= '1';
---- end if;
-
- if (RESET = '1') then
- STATE <= STATE_RECV_START_BIT;
- COUNT <= "0000";
- R_FIFO_WRITEn <= '1';
-
- elsif (SPC_ENABLE = '1') then
-
- if (STATE = STATE_RECV_START_BIT) then
- R_FIFO_WRITEn <= '1';
- if (STARTBIT = "0011") then
- COUNT <= "0011";
- STATE <= STATE_RECV_BIT_0;
- end if;
-
- elsif (STATE = STATE_RECV_FIFOFULL) then
- if (SYNC_R_FIFO_FFn = '1') then
- R_FIFO_WRITEn <= '0';
- STATE <= STATE_RECV_START_BIT;
- end if;
-
- elsif (COUNT = "0000") then
- COUNT <= "0011";
- case STATE is
-
- when STATE_RECV_BIT_0 =>
- PAR_OUT(0) <= STARTBIT(0);
- STATE <= STATE_RECV_BIT_1;
-
- when STATE_RECV_BIT_1 =>
- PAR_OUT(1) <= STARTBIT(0);
- STATE <= STATE_RECV_BIT_2;
-
- when STATE_RECV_BIT_2 =>
- PAR_OUT(2) <= STARTBIT(0);
- STATE <= STATE_RECV_BIT_3;
-
- when STATE_RECV_BIT_3 =>
- PAR_OUT(3) <= STARTBIT(0);
- STATE <= STATE_RECV_BIT_4;
-
- when STATE_RECV_BIT_4 =>
- PAR_OUT(4) <= STARTBIT(0);
- STATE <= STATE_RECV_BIT_5;
-
- when STATE_RECV_BIT_5 =>
- PAR_OUT(5) <= STARTBIT(0);
- STATE <= STATE_RECV_BIT_6;
-
- when STATE_RECV_BIT_6 =>
- PAR_OUT(6) <= STARTBIT(0);
- STATE <= STATE_RECV_BIT_7;
-
- when STATE_RECV_BIT_7 =>
- PAR_OUT(7) <= STARTBIT(0);
-
- if (SYNC_R_FIFO_FFn = '1') then
- STATE <= STATE_RECV_START_BIT;
- R_FIFO_WRITEn <= '0';
- else
- STATE <= STATE_RECV_FIFOFULL;
- end if;
-
- when others =>
- STATE <= STATE_RECV_START_BIT;
-
- end case;
- end if; -- COUNT
- end if; -- RESET ... / SPC_ENABLE ...
- end if; -- PCI_CLOCK ...
-end process;
-
-process(PCI_CLOCK)
-begin
- if (PCI_CLOCK'event and PCI_CLOCK = '1') then
- SPC_RDY_OUT <= SPC_ENABLE AND SYNC_R_FIFO_FFn;
- end if;
-end process;
-
-
-process(PCI_CLOCK)
-begin
- if (PCI_CLOCK'event and PCI_CLOCK = '1') then
- if (RESET = '1') then
- STARTBIT <= "0000";
- else
- STARTBIT(0) <= SERIAL_IN;
- STARTBIT(1) <= STARTBIT(0);
- STARTBIT(2) <= STARTBIT(1);
- STARTBIT(3) <= STARTBIT(2);
- end if;
- end if;
-end process;
-
-
-
-end architecture SER_PAR_CON_DESIGN;
projects / raggedstone / blobdiff