git.zerfleddert.de Git - usb-driver/blob - README

   1 This library emulates Jungo Windrvr USB and parallel port functions in
   2 userspace which are required by XILINX impact to access the Platform cable USB
   3 and Parallel Cable III.
   4 With this library it is possible to access the cables without loading a
   5 proprietary kernel module which breaks with every new kernel release. It uses
   6 the functionality provided by the libusb userspace library for USB access and
   7 the kernel interface at /dev/parport0 for parallel port access instead and
   8 should work on every kernel version which is supported by libusb and supports
   9 ppdev. It was written against impact from ISE Webpack 9.1SP1 and tested with
  10 the following software:
  11
  12  * ISE Webpack 9.1SP3
  13  * ISE Webpack 9.1SP2
  14  * ISE Webpack 9.1SP1
  15  * ISE Webpack 8.2SP3
  16  * ISE Webpack 8.1SP3
  17  * ChipScope 9.1.02i
  18  * EDK 8.2.02i
  19
  20 Build the library by calling `make'.
  21
  22 To use this library you have to preload the library before starting impact:
  23
  24 $ LD_PRELOAD=/path/to/libusb-driver.so impact
  25 or
  26 $ export LD_PRELOAD=/path/to/libusb-driver.so  (for sh shells)
  27 $ setenv LD_PRELOAD /path/to/libusb-driver.so  (for csh shells)
  28 $ impact
  29
  30 The source for this library can be found at:
  31 http://cvs.zerfleddert.de/cgi-bin/viewcvs.cgi/usb-driver/
  32
  33
  34 Notes for the USB cable
  35 =======================
  36
  37 To use the device as an ordinary user, put the following line in a new
  38 file in /etc/udev/rules.d/ and restart udev:
  39 ACTION=="add", BUS=="usb", SYSFS{idVendor}=="03fd", MODE="666"
  40
  41
  42 If your cable does not have the ID 03fd:0008 in the output of lsusb,
  43 the initial firmware has not been loaded (loading it changes the
  44 product-ID from another value to 8). To load the firmware follow
  45 these steps:
  46
  47 1. If you have no /etc/udev/rules.d/xusbdfwu.rules file, copy it from
  48    /path/to/ISE/bin/lin/xusbdfwu.rules to /etc/udev/rules.d/xusbdfwu.rules
  49
  50 2. Install the package containing /sbin/fxload from your linux distribution.
  51    It is usually called "fxload"
  52
  53 3. copy the file /path/to/ISE/bin/lin/xusbdfwu.hex to /usr/share/xusbdfwu.hex
  54
  55 4. restart udev and re-plug the cable
  56
  57
  58 Notes for the parallel cable
  59 ============================
  60
  61 To access the parallel port from userspace, the kernel needs to be built with
  62 the features "Parallel port support" (CONFIG_PARPORT), "PC-style hardware"
  63 (CONFIG_PARPORT_PC) and "Support for user-space parallel port device drivers"
  64 (CONFIG_PPDEV) builtin or as modules. If these features are built as modules,
  65 they need to be loaded before using this library.
  66 These modules are called:
  67 parport
  68 parport_pc
  69 ppdev
  70
  71
  72 To use the device as an ordinary user, put the user in the group 'lp'
  73
  74
  75 If you have an almost compatible cable which works with other software but not
  76 with Impact, try adding -DFORCE_PC3_IDENT to the CFLAGS line in the Makefile.
  77 This enables a hack by Stefan Ziegenbalg to force detection of a parallel cable.
  78
  79
  80 Parallel Cable IV is currently only supported in 'compatibility mode', as no
  81 attempt to configure the ECP registers is done by this library.
  82
  83
  84 If you get "Programming failed" or "DONE did not go high" when programming
  85 through the parallel cable with Impact 9.1, make sure to have the option "Use
  86 HIGHZ instead of BYPASS" enabled in Edit -> Preferences -> iMPACT Configuration
  87 Preferences.
  88 If you are using batch mode, add the following line to your cmd file:
  89 setPreference -pref UseHighz:TRUE
  90 (This problem also occurs on windows and when using the real windrvr in linux and
  91 is solved with the same workaround. Impact 8.2 is working fine with the same
  92 boards and designs)