add: 'hf mf personalize' (personalize UID on Mifare Classic EV1 7byte UID cards)
[proxmark3-svn] / common / protocols.h
1 #ifndef PROTOCOLS_H
2 #define PROTOCOLS_H
3
4 //The following data is taken from http://www.proxmark.org/forum/viewtopic.php?pid=13501#p13501
5 /*
6 ISO14443A (usually NFC tags)
7 26 (7bits) = REQA
8 30 = Read (usage: 30+1byte block number+2bytes ISO14443A-CRC - answer: 16bytes)
9 A2 = Write (usage: A2+1byte block number+4bytes data+2bytes ISO14443A-CRC - answer: 0A [ACK] or 00 [NAK])
10 52 (7bits) = WUPA (usage: 52(7bits) - answer: 2bytes ATQA)
11 93 20 = Anticollision (usage: 9320 - answer: 4bytes UID+1byte UID-bytes-xor)
12 93 70 = Select (usage: 9370+5bytes 9320 answer - answer: 1byte SAK)
13 95 20 = Anticollision of cascade level2
14 95 70 = Select of cascade level2
15 50 00 = Halt (usage: 5000+2bytes ISO14443A-CRC - no answer from card)
16 Mifare
17 60 = Authenticate with KeyA
18 61 = Authenticate with KeyB
19 40 (7bits) = Used to put Chinese Changeable UID cards in special mode (must be followed by 43 (8bits) - answer: 0A)
20 C0 = Decrement
21 C1 = Increment
22 C2 = Restore
23 B0 = Transfer
24 Ultralight C
25 A0 = Compatibility Write (to accomodate MIFARE commands)
26 1A = Step1 Authenticate
27 AF = Step2 Authenticate
28
29
30 ISO14443B
31 05 = REQB
32 1D = ATTRIB
33 50 = HALT
34 SRIX4K (tag does not respond to 05)
35 06 00 = INITIATE
36 0E xx = SELECT ID (xx = Chip-ID)
37 0B = Get UID
38 08 yy = Read Block (yy = block number)
39 09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written)
40 0C = Reset to Inventory
41 0F = Completion
42 0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate)
43
44
45 ISO15693
46 MANDATORY COMMANDS (all ISO15693 tags must support those)
47 01 = Inventory (usage: 260100+2bytes ISO15693-CRC - answer: 12bytes)
48 02 = Stay Quiet
49 OPTIONAL COMMANDS (not all tags support them)
50 20 = Read Block (usage: 0220+1byte block number+2bytes ISO15693-CRC - answer: 4bytes)
51 21 = Write Block (usage: 0221+1byte block number+4bytes data+2bytes ISO15693-CRC - answer: 4bytes)
52 22 = Lock Block
53 23 = Read Multiple Blocks (usage: 0223+1byte 1st block to read+1byte last block to read+2bytes ISO15693-CRC)
54 25 = Select
55 26 = Reset to Ready
56 27 = Write AFI
57 28 = Lock AFI
58 29 = Write DSFID
59 2A = Lock DSFID
60 2B = Get_System_Info (usage: 022B+2bytes ISO15693-CRC - answer: 14 or more bytes)
61 2C = Read Multiple Block Security Status (usage: 022C+1byte 1st block security to read+1byte last block security to read+2bytes ISO15693-CRC)
62
63 EM Microelectronic CUSTOM COMMANDS
64 A5 = Active EAS (followed by 1byte IC Manufacturer code+1byte EAS type)
65 A7 = Write EAS ID (followed by 1byte IC Manufacturer code+2bytes EAS value)
66 B8 = Get Protection Status for a specific block (followed by 1byte IC Manufacturer code+1byte block number+1byte of how many blocks after the previous is needed the info)
67 E4 = Login (followed by 1byte IC Manufacturer code+4bytes password)
68 NXP/Philips CUSTOM COMMANDS
69 A0 = Inventory Read
70 A1 = Fast Inventory Read
71 A2 = Set EAS
72 A3 = Reset EAS
73 A4 = Lock EAS
74 A5 = EAS Alarm
75 A6 = Password Protect EAS
76 A7 = Write EAS ID
77 A8 = Read EPC
78 B0 = Inventory Page Read
79 B1 = Fast Inventory Page Read
80 B2 = Get Random Number
81 B3 = Set Password
82 B4 = Write Password
83 B5 = Lock Password
84 B6 = Bit Password Protection
85 B7 = Lock Page Protection Condition
86 B8 = Get Multiple Block Protection Status
87 B9 = Destroy SLI
88 BA = Enable Privacy
89 BB = 64bit Password Protection
90 40 = Long Range CMD (Standard ISO/TR7003:1990)
91 */
92
93 #define ICLASS_CMD_ACTALL 0x0A
94 #define ICLASS_CMD_READ_OR_IDENTIFY 0x0C
95 #define ICLASS_CMD_SELECT 0x81
96 #define ICLASS_CMD_PAGESEL 0x84
97 #define ICLASS_CMD_READCHECK_KD 0x88
98 #define ICLASS_CMD_READCHECK_KC 0x18
99 #define ICLASS_CMD_CHECK 0x05
100 #define ICLASS_CMD_DETECT 0x0F
101 #define ICLASS_CMD_HALT 0x00
102 #define ICLASS_CMD_UPDATE 0x87
103 #define ICLASS_CMD_ACT 0x8E
104 #define ICLASS_CMD_READ4 0x06
105
106
107 #define ISO14443A_CMD_REQA 0x26
108 #define ISO14443A_CMD_WUPA 0x52
109 #define ISO14443A_CMD_ANTICOLL_OR_SELECT 0x93
110 #define ISO14443A_CMD_ANTICOLL_OR_SELECT_2 0x95
111 #define ISO14443A_CMD_ANTICOLL_OR_SELECT_3 0x97
112 #define ISO14443A_CMD_HALT 0x50
113 #define ISO14443A_CMD_RATS 0xE0
114
115 #define MIFARE_CMD_READBLOCK 0x30
116 #define MIFARE_CMD_WRITEBLOCK 0xA0
117 #define MIFARE_AUTH_KEYA 0x60
118 #define MIFARE_AUTH_KEYB 0x61
119 #define MIFARE_MAGICWUPC1 0x40
120 #define MIFARE_MAGICWUPC2 0x43
121 #define MIFARE_MAGICWIPEC 0x41
122 #define MIFARE_CMD_INC 0xC0
123 #define MIFARE_CMD_DEC 0xC1
124 #define MIFARE_CMD_RESTORE 0xC2
125 #define MIFARE_CMD_TRANSFER 0xB0
126
127 #define MIFARE_EV1_PERSONAL_UID 0x40
128 #define MIFARE_EV1_UIDF0 0x00
129 #define MIFARE_EV1_UIDF1 0x40
130 #define MIFARE_EV1_UIDF2 0x20
131 #define MIFARE_EV1_UIDF3 0x60
132 #define MIFARE_EV1_SETMODE 0x43
133
134 #define MIFARE_ULC_WRITE 0xA2
135 #define MIFARE_ULC_COMP_WRITE MIFARE_CMD_WRITEBLOCK
136 #define MIFARE_ULC_AUTH_1 0x1A
137 #define MIFARE_ULC_AUTH_2 0xAF
138
139 #define MIFARE_ULEV1_AUTH 0x1B
140 #define MIFARE_ULEV1_VERSION 0x60
141 #define MIFARE_ULEV1_FASTREAD 0x3A
142 #define MIFARE_ULEV1_WRITE 0xA2
143 #define MIFARE_ULEV1_COMP_WRITE MIFARE_CMD_WRITEBLOCK
144 #define MIFARE_ULEV1_READ_CNT 0x39
145 #define MIFARE_ULEV1_INCR_CNT 0xA5
146 #define MIFARE_ULEV1_READSIG 0x3C
147 #define MIFARE_ULEV1_CHECKTEAR 0x3E
148 #define MIFARE_ULEV1_VCSL 0x4B
149
150 // mifare 4bit card answers
151 #define CARD_ACK 0x0A // 1010 - ACK
152 #define CARD_NACK_NA 0x04 // 0100 - NACK, not allowed (command not allowed)
153 #define CARD_NACK_TR 0x05 // 0101 - NACK, transmission error
154
155
156 /**
157 06 00 = INITIATE
158 0E xx = SELECT ID (xx = Chip-ID)
159 0B = Get UID
160 08 yy = Read Block (yy = block number)
161 09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written)
162 0C = Reset to Inventory
163 0F = Completion
164 0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate)
165 **/
166
167 #define ISO14443B_REQB 0x05
168 #define ISO14443B_ATTRIB 0x1D
169 #define ISO14443B_HALT 0x50
170 #define ISO14443B_INITIATE 0x06
171 #define ISO14443B_SELECT 0x0E
172 #define ISO14443B_GET_UID 0x0B
173 #define ISO14443B_READ_BLK 0x08
174 #define ISO14443B_WRITE_BLK 0x09
175 #define ISO14443B_RESET 0x0C
176 #define ISO14443B_COMPLETION 0x0F
177 #define ISO14443B_AUTHENTICATE 0x0A
178
179 // ISO15693 COMMANDS
180 #define ISO15693_INVENTORY 0x01
181 #define ISO15693_STAYQUIET 0x02
182 #define ISO15693_READBLOCK 0x20
183 #define ISO15693_WRITEBLOCK 0x21
184 #define ISO15693_LOCKBLOCK 0x22
185 #define ISO15693_READ_MULTI_BLOCK 0x23
186 #define ISO15693_SELECT 0x25
187 #define ISO15693_RESET_TO_READY 0x26
188 #define ISO15693_WRITE_AFI 0x27
189 #define ISO15693_LOCK_AFI 0x28
190 #define ISO15693_WRITE_DSFID 0x29
191 #define ISO15693_LOCK_DSFID 0x2A
192 #define ISO15693_GET_SYSTEM_INFO 0x2B
193 #define ISO15693_READ_MULTI_SECSTATUS 0x2C
194
195 // ISO15693 REQUEST FLAGS
196 #define ISO15693_REQ_SUBCARRIER_TWO (1<<0)
197 #define ISO15693_REQ_DATARATE_HIGH (1<<1)
198 #define ISO15693_REQ_INVENTORY (1<<2)
199 #define ISO15693_REQ_PROTOCOL_EXT (1<<3) // RFU
200 #define ISO15693_REQ_OPTION (1<<6) // Command specific option selector
201 // when REQ_INVENTORY is not set
202 #define ISO15693_REQ_SELECT (1<<4) // only selected cards response
203 #define ISO15693_REQ_ADDRESS (1<<5) // this req contains an address
204 // when REQ_INVENTORY is set
205 #define ISO15693_REQINV_AFI (1<<4) // AFI Field is present
206 #define ISO15693_REQINV_SLOT1 (1<<5) // 1 Slot (16 slots if not set)
207
208 // ISO15693 RESPONSE FLAGS
209 #define ISO15693_RES_ERROR (1<<0)
210 #define ISO15693_RES_EXT (1<<3) // Protocol Extention
211
212 // ISO15693 RESPONSE ERROR CODES
213 #define ISO15693_NOERROR 0x00
214 #define ISO15693_ERROR_CMD_NOT_SUP 0x01 // Command not supported
215 #define ISO15693_ERROR_CMD_NOT_REC 0x02 // Command not recognized (eg. parameter error)
216 #define ISO15693_ERROR_CMD_OPTION 0x03 // Command option not supported
217 #define ISO15693_ERROR_GENERIC 0x0F // No additional Info about this error
218 #define ISO15693_ERROR_BLOCK_UNAVAILABLE 0x10
219 #define ISO15693_ERROR_BLOCK_LOCKED_ALREADY 0x11 // cannot lock again
220 #define ISO15693_ERROR_BLOCK_LOCKED 0x12 // cannot be changed
221 #define ISO15693_ERROR_BLOCK_WRITE 0x13 // Writing was unsuccessful
222 #define ISO15693_ERROR_BLOCL_WRITELOCK 0x14 // Locking was unsuccessful
223
224
225 // Topaz command set:
226 #define TOPAZ_REQA 0x26 // Request
227 #define TOPAZ_WUPA 0x52 // WakeUp
228 #define TOPAZ_RID 0x78 // Read ID
229 #define TOPAZ_RALL 0x00 // Read All (all bytes)
230 #define TOPAZ_READ 0x01 // Read (a single byte)
231 #define TOPAZ_WRITE_E 0x53 // Write-with-erase (a single byte)
232 #define TOPAZ_WRITE_NE 0x1a // Write-no-erase (a single byte)
233 // additional commands for Dynamic Memory Model
234 #define TOPAZ_RSEG 0x10 // Read segment
235 #define TOPAZ_READ8 0x02 // Read (eight bytes)
236 #define TOPAZ_WRITE_E8 0x54 // Write-with-erase (eight bytes)
237 #define TOPAZ_WRITE_NE8 0x1B // Write-no-erase (eight bytes)
238
239
240 #define ISO_14443A 0
241 #define ICLASS 1
242 #define ISO_14443B 2
243 #define TOPAZ 3
244 #define PROTO_MIFARE 4
245 #define ISO_7816_4 5
246 #define ISO_15693 6
247 #define ISO_14443_4 7
248
249
250 //-- Picopass fuses
251 #define FUSE_FPERS 0x80
252 #define FUSE_CODING1 0x40
253 #define FUSE_CODING0 0x20
254 #define FUSE_CRYPT1 0x10
255 #define FUSE_CRYPT0 0x08
256 #define FUSE_FPROD1 0x04
257 #define FUSE_FPROD0 0x02
258 #define FUSE_RA 0x01
259
260 // ISO 7816-4 Basic interindustry commands. For command APDU's.
261 #define ISO7816_ERASE_BINARY 0x0E
262 #define ISO7816_VERIFY 0x20
263 #define ISO7816_MANAGE_CHANNEL 0x70
264 #define ISO7816_EXTERNAL_AUTHENTICATE 0x82
265 #define ISO7816_GET_CHALLENGE 0x84
266 #define ISO7816_INTERNAL_AUTHENTICATE 0x88
267 #define ISO7816_SELECT_FILE 0xA4
268 #define ISO7816_GET_PROCESSING_OPTIONS 0xA8
269 #define ISO7816_READ_BINARY 0xB0
270 #define ISO7816_READ_RECORDS 0xB2
271 #define ISO7816_GET_RESPONSE 0xC0
272 #define ISO7816_ENVELOPE 0xC2
273 #define ISO7816_GET_DATA 0xCA
274 #define ISO7816_WRITE_BINARY 0xD0
275 #define ISO7816_WRITE_RECORD 0xD2
276 #define ISO7816_UPDATE_BINARY 0xD6
277 #define ISO7816_PUT_DATA 0xDA
278 #define ISO7816_UPDATE_DATA 0xDC
279 #define ISO7816_APPEND_RECORD 0xE2
280 // ISO7816-4 For response APDU's
281 #define ISO7816_OK 0x9000
282 // 6x xx = ERROR
283 #define ISO7816_MAX_FRAME_SIZE 261
284
285
286
287 void printIclassDumpInfo(uint8_t* iclass_dump);
288 void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t *max_blk, uint8_t *app_areas, uint8_t *kb);
289
290 /* T55x7 configuration register definitions */
291 #define T55x7_POR_DELAY 0x00000001
292 #define T55x7_ST_TERMINATOR 0x00000008
293 #define T55x7_PWD 0x00000010
294 #define T55x7_MAXBLOCK_SHIFT 5
295 #define T55x7_AOR 0x00000200
296 #define T55x7_PSKCF_RF_2 0
297 #define T55x7_PSKCF_RF_4 0x00000400
298 #define T55x7_PSKCF_RF_8 0x00000800
299 #define T55x7_MODULATION_DIRECT 0
300 #define T55x7_MODULATION_PSK1 0x00001000
301 #define T55x7_MODULATION_PSK2 0x00002000
302 #define T55x7_MODULATION_PSK3 0x00003000
303 #define T55x7_MODULATION_FSK1 0x00004000
304 #define T55x7_MODULATION_FSK2 0x00005000
305 #define T55x7_MODULATION_FSK1a 0x00006000
306 #define T55x7_MODULATION_FSK2a 0x00007000
307 #define T55x7_MODULATION_MANCHESTER 0x00008000
308 #define T55x7_MODULATION_BIPHASE 0x00010000
309 #define T55x7_MODULATION_DIPHASE 0x00018000
310 #define T55x7_X_MODE 0x00020000
311 #define T55x7_BITRATE_RF_8 0
312 #define T55x7_BITRATE_RF_16 0x00040000
313 #define T55x7_BITRATE_RF_32 0x00080000
314 #define T55x7_BITRATE_RF_40 0x000C0000
315 #define T55x7_BITRATE_RF_50 0x00100000
316 #define T55x7_BITRATE_RF_64 0x00140000
317 #define T55x7_BITRATE_RF_100 0x00180000
318 #define T55x7_BITRATE_RF_128 0x001C0000
319
320 /* T5555 (Q5) configuration register definitions */
321 #define T5555_ST_TERMINATOR 0x00000001
322 #define T5555_MAXBLOCK_SHIFT 0x00000001
323 #define T5555_MODULATION_MANCHESTER 0
324 #define T5555_MODULATION_PSK1 0x00000010
325 #define T5555_MODULATION_PSK2 0x00000020
326 #define T5555_MODULATION_PSK3 0x00000030
327 #define T5555_MODULATION_FSK1 0x00000040
328 #define T5555_MODULATION_FSK2 0x00000050
329 #define T5555_MODULATION_BIPHASE 0x00000060
330 #define T5555_MODULATION_DIRECT 0x00000070
331 #define T5555_INVERT_OUTPUT 0x00000080
332 #define T5555_PSK_RF_2 0
333 #define T5555_PSK_RF_4 0x00000100
334 #define T5555_PSK_RF_8 0x00000200
335 #define T5555_USE_PWD 0x00000400
336 #define T5555_USE_AOR 0x00000800
337 #define T5555_SET_BITRATE(x) (((x-2)/2)<<12)
338 #define T5555_GET_BITRATE(x) ((((x >> 12) & 0x3F)*2)+2)
339 #define T5555_BITRATE_SHIFT 12 //(RF=2n+2) ie 64=2*0x1F+2 or n = (RF-2)/2
340 #define T5555_FAST_WRITE 0x00004000
341 #define T5555_PAGE_SELECT 0x00008000
342
343 #define T55XX_WRITE_TIMEOUT 1500
344
345 uint32_t GetT55xxClockBit(uint32_t clock);
346
347 // em4x05 & em4x69 chip configuration register definitions
348 #define EM4x05_GET_BITRATE(x) (((x & 0x3F)*2)+2)
349 #define EM4x05_SET_BITRATE(x) ((x-2)/2)
350 #define EM4x05_MODULATION_NRZ 0x00000000
351 #define EM4x05_MODULATION_MANCHESTER 0x00000040
352 #define EM4x05_MODULATION_BIPHASE 0x00000080
353 #define EM4x05_MODULATION_MILLER 0x000000C0 //not supported by all 4x05/4x69 chips
354 #define EM4x05_MODULATION_PSK1 0x00000100 //not supported by all 4x05/4x69 chips
355 #define EM4x05_MODULATION_PSK2 0x00000140 //not supported by all 4x05/4x69 chips
356 #define EM4x05_MODULATION_PSK3 0x00000180 //not supported by all 4x05/4x69 chips
357 #define EM4x05_MODULATION_FSK1 0x00000200 //not supported by all 4x05/4x69 chips
358 #define EM4x05_MODULATION_FSK2 0x00000240 //not supported by all 4x05/4x69 chips
359 #define EM4x05_PSK_RF_2 0
360 #define EM4x05_PSK_RF_4 0x00000400
361 #define EM4x05_PSK_RF_8 0x00000800
362 #define EM4x05_MAXBLOCK_SHIFT 14
363 #define EM4x05_FIRST_USER_BLOCK 5
364 #define EM4x05_SET_NUM_BLOCKS(x) ((x+5-1)<<14) //# of blocks sent during default read mode
365 #define EM4x05_GET_NUM_BLOCKS(x) (((x>>14) & 0xF)-5+1)
366 #define EM4x05_READ_LOGIN_REQ 1<<18
367 #define EM4x05_READ_HK_LOGIN_REQ 1<<19
368 #define EM4x05_WRITE_LOGIN_REQ 1<<20
369 #define EM4x05_WRITE_HK_LOGIN_REQ 1<<21
370 #define EM4x05_READ_AFTER_WRITE 1<<22
371 #define EM4x05_DISABLE_ALLOWED 1<<23
372 #define EM4x05_READER_TALK_FIRST 1<<24
373
374 #endif
375 // PROTOCOLS_H
Impressum, Datenschutz