+++ /dev/null
-/**
- * \file config.h
- *
- * \brief Configuration options (set of defines)
- *
- * Copyright (C) 2006-2014, Brainspark B.V.
- *
- * This file is part of PolarSSL (http://www.polarssl.org)
- * Lead Maintainer: Paul Bakker <polarssl_maintainer at polarssl.org>
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * This set of compile-time options may be used to enable
- * or disable features selectively, and reduce the global
- * memory footprint.
- */
-#ifndef POLARSSL_CONFIG_H
-#define POLARSSL_CONFIG_H
-
-#if defined(_MSC_VER) && !defined(_CRT_SECURE_NO_DEPRECATE)
-#define _CRT_SECURE_NO_DEPRECATE 1
-#endif
-
-/**
- * \name SECTION: System support
- *
- * This section sets system specific settings.
- * \{
- */
-
-/**
- * \def POLARSSL_HAVE_INT8
- *
- * The system uses 8-bit wide native integers.
- *
- * Uncomment if native integers are 8-bit wide.
- */
-//#define POLARSSL_HAVE_INT8
-
-/**
- * \def POLARSSL_HAVE_INT16
- *
- * The system uses 16-bit wide native integers.
- *
- * Uncomment if native integers are 16-bit wide.
- */
-//#define POLARSSL_HAVE_INT16
-
-/**
- * \def POLARSSL_HAVE_LONGLONG
- *
- * The compiler supports the 'long long' type.
- * (Only used on 32-bit platforms)
- */
-#define POLARSSL_HAVE_LONGLONG
-
-/**
- * \def POLARSSL_HAVE_ASM
- *
- * The compiler has support for asm().
- *
- * Requires support for asm() in compiler.
- *
- * Used in:
- * library/timing.c
- * library/padlock.c
- * include/polarssl/bn_mul.h
- *
- * Comment to disable the use of assembly code.
- */
-//#define POLARSSL_HAVE_ASM
-
-/**
- * \def POLARSSL_HAVE_SSE2
- *
- * CPU supports SSE2 instruction set.
- *
- * Uncomment if the CPU supports SSE2 (IA-32 specific).
- */
-//#define POLARSSL_HAVE_SSE2
-
-/**
- * \def POLARSSL_HAVE_TIME
- *
- * System has time.h and time() / localtime() / gettimeofday().
- *
- * Comment if your system does not support time functions
- */
-#define POLARSSL_HAVE_TIME
-
-/**
- * \def POLARSSL_HAVE_IPV6
- *
- * System supports the basic socket interface for IPv6 (RFC 3493),
- * specifically getaddrinfo(), freeaddrinfo() and struct sockaddr_storage.
- *
- * Note: on Windows/MingW, XP or higher is required.
- *
- * Comment if your system does not support the IPv6 socket interface
- */
-#define POLARSSL_HAVE_IPV6
-
-/**
- * \def POLARSSL_PLATFORM_MEMORY
- *
- * Enable the memory allocation layer.
- *
- * By default PolarSSL uses the system-provided malloc() and free().
- * This allows different allocators (self-implemented or provided) to be
- * provided to the platform abstraction layer.
- *
- * Enabling POLARSSL_PLATFORM_MEMORY will provide "platform_set_malloc_free()"
- * to allow you to set an alternative malloc() and free() function pointer.
- *
- * Requires: POLARSSL_PLATFORM_C
- *
- * Enable this layer to allow use of alternative memory allocators.
- */
-//#define POLARSSL_PLATFORM_MEMORY
-
-/**
- * \def POLARSSL_PLATFORM_NO_STD_FUNCTIONS
- *
- * Do not assign standard functions in the platform layer (e.g. malloc() to
- * POLARSSL_PLATFORM_STD_MALLOC and printf() to POLARSSL_PLATFORM_STD_PRINTF)
- *
- * This makes sure there are no linking errors on platforms that do not support
- * these functions. You will HAVE to provide alternatives, either at runtime
- * via the platform_set_xxx() functions or at compile time by setting
- * the POLARSSL_PLATFORM_STD_XXX defines.
- *
- * Requires: POLARSSL_PLATFORM_C
- *
- * Uncomment to prevent default assignment of standard functions in the
- * platform layer.
- */
-//#define POLARSSL_PLATFORM_NO_STD_FUNCTIONS
-
-/**
- * \def POLARSSL_PLATFORM_XXX_ALT
- *
- * Uncomment a macro to let PolarSSL support the function in the platform
- * abstraction layer.
- *
- * Example: In case you uncomment POLARSSL_PLATFORM_PRINTF_ALT, PolarSSL will
- * provide a function "platform_set_printf()" that allows you to set an
- * alternative printf function pointer.
- *
- * All these define require POLARSSL_PLATFORM_C to be defined!
- *
- * Uncomment a macro to enable alternate implementation of specific base
- * platform function
- */
-//#define POLARSSL_PLATFORM_PRINTF_ALT
-//#define POLARSSL_PLATFORM_FPRINTF_ALT
-/* \} name SECTION: System support */
-
-/**
- * \name SECTION: PolarSSL feature support
- *
- * This section sets support for features that are or are not needed
- * within the modules that are enabled.
- * \{
- */
-
-/**
- * \def POLARSSL_TIMING_ALT
- *
- * Uncomment to provide your own alternate implementation for hardclock(),
- * get_timer(), set_alarm() and m_sleep().
- *
- * Only works if you have POLARSSL_TIMING_C enabled.
- *
- * You will need to provide a header "timing_alt.h" and an implementation at
- * compile time.
- */
-//#define POLARSSL_TIMING_ALT
-
-/**
- * \def POLARSSL_XXX_ALT
- *
- * Uncomment a macro to let PolarSSL use your alternate core implementation of
- * a symmetric or hash algorithm (e.g. platform specific assembly optimized
- * implementations). Keep in mind that the function prototypes should remain
- * the same.
- *
- * Example: In case you uncomment POLARSSL_AES_ALT, PolarSSL will no longer
- * provide the "struct aes_context" definition and omit the base function
- * declarations and implementations. "aes_alt.h" will be included from
- * "aes.h" to include the new function definitions.
- *
- * Uncomment a macro to enable alternate implementation for core algorithm
- * functions
- */
-//#define POLARSSL_AES_ALT
-//#define POLARSSL_ARC4_ALT
-//#define POLARSSL_BLOWFISH_ALT
-//#define POLARSSL_CAMELLIA_ALT
-//#define POLARSSL_DES_ALT
-//#define POLARSSL_XTEA_ALT
-//#define POLARSSL_MD2_ALT
-//#define POLARSSL_MD4_ALT
-//#define POLARSSL_MD5_ALT
-//#define POLARSSL_RIPEMD160_ALT
-//#define POLARSSL_SHA1_ALT
-//#define POLARSSL_SHA256_ALT
-//#define POLARSSL_SHA512_ALT
-
-/**
- * \def POLARSSL_AES_ROM_TABLES
- *
- * Store the AES tables in ROM.
- *
- * Uncomment this macro to store the AES tables in ROM.
- *
- */
-//#define POLARSSL_AES_ROM_TABLES
-
-/**
- * \def POLARSSL_CIPHER_MODE_CBC
- *
- * Enable Cipher Block Chaining mode (CBC) for symmetric ciphers.
- */
-#define POLARSSL_CIPHER_MODE_CBC
-
-/**
- * \def POLARSSL_CIPHER_MODE_CFB
- *
- * Enable Cipher Feedback mode (CFB) for symmetric ciphers.
- */
-#define POLARSSL_CIPHER_MODE_CFB
-
-/**
- * \def POLARSSL_CIPHER_MODE_CTR
- *
- * Enable Counter Block Cipher mode (CTR) for symmetric ciphers.
- */
-#define POLARSSL_CIPHER_MODE_CTR
-
-/**
- * \def POLARSSL_CIPHER_NULL_CIPHER
- *
- * Enable NULL cipher.
- * Warning: Only do so when you know what you are doing. This allows for
- * encryption or channels without any security!
- *
- * Requires POLARSSL_ENABLE_WEAK_CIPHERSUITES as well to enable
- * the following ciphersuites:
- * TLS_ECDH_ECDSA_WITH_NULL_SHA
- * TLS_ECDH_RSA_WITH_NULL_SHA
- * TLS_ECDHE_ECDSA_WITH_NULL_SHA
- * TLS_ECDHE_RSA_WITH_NULL_SHA
- * TLS_ECDHE_PSK_WITH_NULL_SHA384
- * TLS_ECDHE_PSK_WITH_NULL_SHA256
- * TLS_ECDHE_PSK_WITH_NULL_SHA
- * TLS_DHE_PSK_WITH_NULL_SHA384
- * TLS_DHE_PSK_WITH_NULL_SHA256
- * TLS_DHE_PSK_WITH_NULL_SHA
- * TLS_RSA_WITH_NULL_SHA256
- * TLS_RSA_WITH_NULL_SHA
- * TLS_RSA_WITH_NULL_MD5
- * TLS_RSA_PSK_WITH_NULL_SHA384
- * TLS_RSA_PSK_WITH_NULL_SHA256
- * TLS_RSA_PSK_WITH_NULL_SHA
- * TLS_PSK_WITH_NULL_SHA384
- * TLS_PSK_WITH_NULL_SHA256
- * TLS_PSK_WITH_NULL_SHA
- *
- * Uncomment this macro to enable the NULL cipher and ciphersuites
- */
-//#define POLARSSL_CIPHER_NULL_CIPHER
-
-/**
- * \def POLARSSL_CIPHER_PADDING_XXX
- *
- * Uncomment or comment macros to add support for specific padding modes
- * in the cipher layer with cipher modes that support padding (e.g. CBC)
- *
- * If you disable all padding modes, only full blocks can be used with CBC.
- *
- * Enable padding modes in the cipher layer.
- */
-#define POLARSSL_CIPHER_PADDING_PKCS7
-#define POLARSSL_CIPHER_PADDING_ONE_AND_ZEROS
-#define POLARSSL_CIPHER_PADDING_ZEROS_AND_LEN
-#define POLARSSL_CIPHER_PADDING_ZEROS
-
-/**
- * \def POLARSSL_ENABLE_WEAK_CIPHERSUITES
- *
- * Enable weak ciphersuites in SSL / TLS.
- * Warning: Only do so when you know what you are doing. This allows for
- * channels with virtually no security at all!
- *
- * This enables the following ciphersuites:
- * TLS_RSA_WITH_DES_CBC_SHA
- * TLS_DHE_RSA_WITH_DES_CBC_SHA
- *
- * Uncomment this macro to enable weak ciphersuites
- */
-//#define POLARSSL_ENABLE_WEAK_CIPHERSUITES
-
-/**
- * \def POLARSSL_REMOVE_ARC4_CIPHERSUITES
- *
- * Remove RC4 ciphersuites by default in SSL / TLS.
- * This flag removes the ciphersuites based on RC4 from the default list as
- * returned by ssl_list_ciphersuites(). However, it is still possible to
- * enable (some of) them with ssl_set_ciphersuites() by including them
- * explicitly.
- *
- * Uncomment this macro to remove RC4 ciphersuites by default.
- */
-//#define POLARSSL_REMOVE_ARC4_CIPHERSUITES
-
-/**
- * \def POLARSSL_ECP_XXXX_ENABLED
- *
- * Enables specific curves within the Elliptic Curve module.
- * By default all supported curves are enabled.
- *
- * Comment macros to disable the curve and functions for it
- */
-#define POLARSSL_ECP_DP_SECP192R1_ENABLED
-#define POLARSSL_ECP_DP_SECP224R1_ENABLED
-#define POLARSSL_ECP_DP_SECP256R1_ENABLED
-#define POLARSSL_ECP_DP_SECP384R1_ENABLED
-#define POLARSSL_ECP_DP_SECP521R1_ENABLED
-#define POLARSSL_ECP_DP_SECP192K1_ENABLED
-#define POLARSSL_ECP_DP_SECP224K1_ENABLED
-#define POLARSSL_ECP_DP_SECP256K1_ENABLED
-#define POLARSSL_ECP_DP_BP256R1_ENABLED
-#define POLARSSL_ECP_DP_BP384R1_ENABLED
-#define POLARSSL_ECP_DP_BP512R1_ENABLED
-//#define POLARSSL_ECP_DP_M221_ENABLED // Not implemented yet!
-#define POLARSSL_ECP_DP_M255_ENABLED
-//#define POLARSSL_ECP_DP_M383_ENABLED // Not implemented yet!
-//#define POLARSSL_ECP_DP_M511_ENABLED // Not implemented yet!
-
-/**
- * \def POLARSSL_ECP_NIST_OPTIM
- *
- * Enable specific 'modulo p' routines for each NIST prime.
- * Depending on the prime and architecture, makes operations 4 to 8 times
- * faster on the corresponding curve.
- *
- * Comment this macro to disable NIST curves optimisation.
- */
-#define POLARSSL_ECP_NIST_OPTIM
-
-/**
- * \def POLARSSL_ECDSA_DETERMINISTIC
- *
- * Enable deterministic ECDSA (RFC 6979).
- * Standard ECDSA is "fragile" in the sense that lack of entropy when signing
- * may result in a compromise of the long-term signing key. This is avoided by
- * the deterministic variant.
- *
- * Requires: POLARSSL_HMAC_DRBG_C
- *
- * Comment this macro to disable deterministic ECDSA.
- */
-#define POLARSSL_ECDSA_DETERMINISTIC
-
-/**
- * \def POLARSSL_KEY_EXCHANGE_PSK_ENABLED
- *
- * Enable the PSK based ciphersuite modes in SSL / TLS.
- *
- * This enables the following ciphersuites (if other requisites are
- * enabled as well):
- * TLS_PSK_WITH_AES_256_GCM_SHA384
- * TLS_PSK_WITH_AES_256_CBC_SHA384
- * TLS_PSK_WITH_AES_256_CBC_SHA
- * TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384
- * TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384
- * TLS_PSK_WITH_AES_128_GCM_SHA256
- * TLS_PSK_WITH_AES_128_CBC_SHA256
- * TLS_PSK_WITH_AES_128_CBC_SHA
- * TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256
- * TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256
- * TLS_PSK_WITH_3DES_EDE_CBC_SHA
- * TLS_PSK_WITH_RC4_128_SHA
- */
-#define POLARSSL_KEY_EXCHANGE_PSK_ENABLED
-
-/**
- * \def POLARSSL_KEY_EXCHANGE_DHE_PSK_ENABLED
- *
- * Enable the DHE-PSK based ciphersuite modes in SSL / TLS.
- *
- * Requires: POLARSSL_DHM_C
- *
- * This enables the following ciphersuites (if other requisites are
- * enabled as well):
- * TLS_DHE_PSK_WITH_AES_256_GCM_SHA384
- * TLS_DHE_PSK_WITH_AES_256_CBC_SHA384
- * TLS_DHE_PSK_WITH_AES_256_CBC_SHA
- * TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384
- * TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
- * TLS_DHE_PSK_WITH_AES_128_GCM_SHA256
- * TLS_DHE_PSK_WITH_AES_128_CBC_SHA256
- * TLS_DHE_PSK_WITH_AES_128_CBC_SHA
- * TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256
- * TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
- * TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA
- * TLS_DHE_PSK_WITH_RC4_128_SHA
- */
-#define POLARSSL_KEY_EXCHANGE_DHE_PSK_ENABLED
-
-/**
- * \def POLARSSL_KEY_EXCHANGE_ECDHE_PSK_ENABLED
- *
- * Enable the ECDHE-PSK based ciphersuite modes in SSL / TLS.
- *
- * Requires: POLARSSL_ECDH_C
- *
- * This enables the following ciphersuites (if other requisites are
- * enabled as well):
- * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384
- * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA
- * TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
- * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256
- * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA
- * TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
- * TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA
- * TLS_ECDHE_PSK_WITH_RC4_128_SHA
- */
-#define POLARSSL_KEY_EXCHANGE_ECDHE_PSK_ENABLED
-
-/**
- * \def POLARSSL_KEY_EXCHANGE_RSA_PSK_ENABLED
- *
- * Enable the RSA-PSK based ciphersuite modes in SSL / TLS.
- *
- * Requires: POLARSSL_RSA_C, POLARSSL_PKCS1_V15,
- * POLARSSL_X509_CRT_PARSE_C
- *
- * This enables the following ciphersuites (if other requisites are
- * enabled as well):
- * TLS_RSA_PSK_WITH_AES_256_GCM_SHA384
- * TLS_RSA_PSK_WITH_AES_256_CBC_SHA384
- * TLS_RSA_PSK_WITH_AES_256_CBC_SHA
- * TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384
- * TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384
- * TLS_RSA_PSK_WITH_AES_128_GCM_SHA256
- * TLS_RSA_PSK_WITH_AES_128_CBC_SHA256
- * TLS_RSA_PSK_WITH_AES_128_CBC_SHA
- * TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256
- * TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256
- * TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA
- * TLS_RSA_PSK_WITH_RC4_128_SHA
- */
-#define POLARSSL_KEY_EXCHANGE_RSA_PSK_ENABLED
-
-/**
- * \def POLARSSL_KEY_EXCHANGE_RSA_ENABLED
- *
- * Enable the RSA-only based ciphersuite modes in SSL / TLS.
- *
- * Requires: POLARSSL_RSA_C, POLARSSL_PKCS1_V15,
- * POLARSSL_X509_CRT_PARSE_C
- *
- * This enables the following ciphersuites (if other requisites are
- * enabled as well):
- * TLS_RSA_WITH_AES_256_GCM_SHA384
- * TLS_RSA_WITH_AES_256_CBC_SHA256
- * TLS_RSA_WITH_AES_256_CBC_SHA
- * TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384
- * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256
- * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA
- * TLS_RSA_WITH_AES_128_GCM_SHA256
- * TLS_RSA_WITH_AES_128_CBC_SHA256
- * TLS_RSA_WITH_AES_128_CBC_SHA
- * TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256
- * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256
- * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA
- * TLS_RSA_WITH_3DES_EDE_CBC_SHA
- * TLS_RSA_WITH_RC4_128_SHA
- * TLS_RSA_WITH_RC4_128_MD5
- */
-#define POLARSSL_KEY_EXCHANGE_RSA_ENABLED
-
-/**
- * \def POLARSSL_KEY_EXCHANGE_DHE_RSA_ENABLED
- *
- * Enable the DHE-RSA based ciphersuite modes in SSL / TLS.
- *
- * Requires: POLARSSL_DHM_C, POLARSSL_RSA_C, POLARSSL_PKCS1_V15,
- * POLARSSL_X509_CRT_PARSE_C
- *
- * This enables the following ciphersuites (if other requisites are
- * enabled as well):
- * TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
- * TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
- * TLS_DHE_RSA_WITH_AES_256_CBC_SHA
- * TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
- * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256
- * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA
- * TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
- * TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
- * TLS_DHE_RSA_WITH_AES_128_CBC_SHA
- * TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
- * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
- * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA
- * TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
- */
-#define POLARSSL_KEY_EXCHANGE_DHE_RSA_ENABLED
-
-/**
- * \def POLARSSL_KEY_EXCHANGE_ECDHE_RSA_ENABLED
- *
- * Enable the ECDHE-RSA based ciphersuite modes in SSL / TLS.
- *
- * Requires: POLARSSL_ECDH_C, POLARSSL_RSA_C, POLARSSL_PKCS1_V15,
- * POLARSSL_X509_CRT_PARSE_C
- *
- * This enables the following ciphersuites (if other requisites are
- * enabled as well):
- * TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
- * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
- * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
- * TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
- * TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384
- * TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
- * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
- * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
- * TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
- * TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
- * TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
- * TLS_ECDHE_RSA_WITH_RC4_128_SHA
- */
-#define POLARSSL_KEY_EXCHANGE_ECDHE_RSA_ENABLED
-
-/**
- * \def POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
- *
- * Enable the ECDHE-ECDSA based ciphersuite modes in SSL / TLS.
- *
- * Requires: POLARSSL_ECDH_C, POLARSSL_ECDSA_C, POLARSSL_X509_CRT_PARSE_C,
- *
- * This enables the following ciphersuites (if other requisites are
- * enabled as well):
- * TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
- * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
- * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
- * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
- * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
- * TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
- * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
- * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
- * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
- * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
- * TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
- * TLS_ECDHE_ECDSA_WITH_RC4_128_SHA
- */
-#define POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
-
-/**
- * \def POLARSSL_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
- *
- * Enable the ECDH-ECDSA based ciphersuite modes in SSL / TLS.
- *
- * Requires: POLARSSL_ECDH_C, POLARSSL_X509_CRT_PARSE_C
- *
- * This enables the following ciphersuites (if other requisites are
- * enabled as well):
- * TLS_ECDH_ECDSA_WITH_RC4_128_SHA
- * TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
- * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
- * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
- * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
- * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
- * TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
- * TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
- * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
- * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
- * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
- * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
- */
-#define POLARSSL_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
-
-/**
- * \def POLARSSL_KEY_EXCHANGE_ECDH_RSA_ENABLED
- *
- * Enable the ECDH-RSA based ciphersuite modes in SSL / TLS.
- *
- * Requires: POLARSSL_ECDH_C, POLARSSL_X509_CRT_PARSE_C
- *
- * This enables the following ciphersuites (if other requisites are
- * enabled as well):
- * TLS_ECDH_RSA_WITH_RC4_128_SHA
- * TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
- * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
- * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
- * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
- * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
- * TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
- * TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
- * TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256
- * TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384
- * TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256
- * TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384
- */
-#define POLARSSL_KEY_EXCHANGE_ECDH_RSA_ENABLED
-
-/**
- * \def POLARSSL_PK_PARSE_EC_EXTENDED
- *
- * Enhance support for reading EC keys using variants of SEC1 not allowed by
- * RFC 5915 and RFC 5480.
- *
- * Currently this means parsing the SpecifiedECDomain choice of EC
- * parameters (only known groups are supported, not arbitrary domains, to
- * avoid validation issues).
- *
- * Disable if you only need to support RFC 5915 + 5480 key formats.
- */
-#define POLARSSL_PK_PARSE_EC_EXTENDED
-
-/**
- * \def POLARSSL_ERROR_STRERROR_BC
- *
- * Make available the backward compatible error_strerror() next to the
- * current polarssl_strerror().
- *
- * For new code, it is recommended to use polarssl_strerror() instead and
- * disable this.
- *
- * Disable if you run into name conflicts and want to really remove the
- * error_strerror()
- */
-#define POLARSSL_ERROR_STRERROR_BC
-
-/**
- * \def POLARSSL_ERROR_STRERROR_DUMMY
- *
- * Enable a dummy error function to make use of polarssl_strerror() in
- * third party libraries easier when POLARSSL_ERROR_C is disabled
- * (no effect when POLARSSL_ERROR_C is enabled).
- *
- * You can safely disable this if POLARSSL_ERROR_C is enabled, or if you're
- * not using polarssl_strerror() or error_strerror() in your application.
- *
- * Disable if you run into name conflicts and want to really remove the
- * polarssl_strerror()
- */
-#define POLARSSL_ERROR_STRERROR_DUMMY
-
-/**
- * \def POLARSSL_GENPRIME
- *
- * Enable the prime-number generation code.
- *
- * Requires: POLARSSL_BIGNUM_C
- */
-#define POLARSSL_GENPRIME
-
-/**
- * \def POLARSSL_FS_IO
- *
- * Enable functions that use the filesystem.
- */
-#define POLARSSL_FS_IO
-
-/**
- * \def POLARSSL_NO_DEFAULT_ENTROPY_SOURCES
- *
- * Do not add default entropy sources. These are the platform specific,
- * hardclock and HAVEGE based poll functions.
- *
- * This is useful to have more control over the added entropy sources in an
- * application.
- *
- * Uncomment this macro to prevent loading of default entropy functions.
- */
-//#define POLARSSL_NO_DEFAULT_ENTROPY_SOURCES
-
-/**
- * \def POLARSSL_NO_PLATFORM_ENTROPY
- *
- * Do not use built-in platform entropy functions.
- * This is useful if your platform does not support
- * standards like the /dev/urandom or Windows CryptoAPI.
- *
- * Uncomment this macro to disable the built-in platform entropy functions.
- */
-//#define POLARSSL_NO_PLATFORM_ENTROPY
-
-/**
- * \def POLARSSL_ENTROPY_FORCE_SHA256
- *
- * Force the entropy accumulator to use a SHA-256 accumulator instead of the
- * default SHA-512 based one (if both are available).
- *
- * Requires: POLARSSL_SHA256_C
- *
- * On 32-bit systems SHA-256 can be much faster than SHA-512. Use this option
- * if you have performance concerns.
- *
- * This option is only useful if both POLARSSL_SHA256_C and
- * POLARSSL_SHA512_C are defined. Otherwise the available hash module is used.
- */
-//#define POLARSSL_ENTROPY_FORCE_SHA256
-
-/**
- * \def POLARSSL_MEMORY_DEBUG
- *
- * Enable debugging of buffer allocator memory issues. Automatically prints
- * (to stderr) all (fatal) messages on memory allocation issues. Enables
- * function for 'debug output' of allocated memory.
- *
- * Requires: POLARSSL_MEMORY_BUFFER_ALLOC_C
- *
- * Uncomment this macro to let the buffer allocator print out error messages.
- */
-//#define POLARSSL_MEMORY_DEBUG
-
-/**
- * \def POLARSSL_MEMORY_BACKTRACE
- *
- * Include backtrace information with each allocated block.
- *
- * Requires: POLARSSL_MEMORY_BUFFER_ALLOC_C
- * GLIBC-compatible backtrace() an backtrace_symbols() support
- *
- * Uncomment this macro to include backtrace information
- */
-//#define POLARSSL_MEMORY_BACKTRACE
-
-/**
- * \def POLARSSL_PKCS1_V15
- *
- * Enable support for PKCS#1 v1.5 encoding.
- *
- * Requires: POLARSSL_RSA_C
- *
- * This enables support for PKCS#1 v1.5 operations.
- */
-#define POLARSSL_PKCS1_V15
-
-/**
- * \def POLARSSL_PKCS1_V21
- *
- * Enable support for PKCS#1 v2.1 encoding.
- *
- * Requires: POLARSSL_MD_C, POLARSSL_RSA_C
- *
- * This enables support for RSAES-OAEP and RSASSA-PSS operations.
- */
-//#define POLARSSL_PKCS1_V21
-
-/**
- * \def POLARSSL_RSA_NO_CRT
- *
- * Do not use the Chinese Remainder Theorem for the RSA private operation.
- *
- * Uncomment this macro to disable the use of CRT in RSA.
- *
- */
-//#define POLARSSL_RSA_NO_CRT
-
-/**
- * \def POLARSSL_SELF_TEST
- *
- * Enable the checkup functions (*_self_test).
- */
-#define POLARSSL_SELF_TEST
-
-/**
- * \def POLARSSL_SSL_ALL_ALERT_MESSAGES
- *
- * Enable sending of alert messages in case of encountered errors as per RFC.
- * If you choose not to send the alert messages, PolarSSL can still communicate
- * with other servers, only debugging of failures is harder.
- *
- * The advantage of not sending alert messages, is that no information is given
- * about reasons for failures thus preventing adversaries of gaining intel.
- *
- * Enable sending of all alert messages
- */
-#define POLARSSL_SSL_ALERT_MESSAGES
-
-/**
- * \def POLARSSL_SSL_DEBUG_ALL
- *
- * Enable the debug messages in SSL module for all issues.
- * Debug messages have been disabled in some places to prevent timing
- * attacks due to (unbalanced) debugging function calls.
- *
- * If you need all error reporting you should enable this during debugging,
- * but remove this for production servers that should log as well.
- *
- * Uncomment this macro to report all debug messages on errors introducing
- * a timing side-channel.
- *
- */
-//#define POLARSSL_SSL_DEBUG_ALL
-
-/**
- * \def POLARSSL_SSL_HW_RECORD_ACCEL
- *
- * Enable hooking functions in SSL module for hardware acceleration of
- * individual records.
- *
- * Uncomment this macro to enable hooking functions.
- */
-//#define POLARSSL_SSL_HW_RECORD_ACCEL
-
-/**
- * \def POLARSSL_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO
- *
- * Enable support for receiving and parsing SSLv2 Client Hello messages for the
- * SSL Server module (POLARSSL_SSL_SRV_C).
- *
- * Comment this macro to disable support for SSLv2 Client Hello messages.
- */
-#define POLARSSL_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO
-
-/**
- * \def POLARSSL_SSL_SRV_RESPECT_CLIENT_PREFERENCE
- *
- * Pick the ciphersuite according to the client's preferences rather than ours
- * in the SSL Server module (POLARSSL_SSL_SRV_C).
- *
- * Uncomment this macro to respect client's ciphersuite order
- */
-//#define POLARSSL_SSL_SRV_RESPECT_CLIENT_PREFERENCE
-
-/**
- * \def POLARSSL_SSL_MAX_FRAGMENT_LENGTH
- *
- * Enable support for RFC 6066 max_fragment_length extension in SSL.
- *
- * Comment this macro to disable support for the max_fragment_length extension
- */
-#define POLARSSL_SSL_MAX_FRAGMENT_LENGTH
-
-/**
- * \def POLARSSL_SSL_PROTO_SSL3
- *
- * Enable support for SSL 3.0.
- *
- * Requires: POLARSSL_MD5_C
- * POLARSSL_SHA1_C
- *
- * Comment this macro to disable support for SSL 3.0
- */
-#define POLARSSL_SSL_PROTO_SSL3
-
-/**
- * \def POLARSSL_SSL_PROTO_TLS1
- *
- * Enable support for TLS 1.0.
- *
- * Requires: POLARSSL_MD5_C
- * POLARSSL_SHA1_C
- *
- * Comment this macro to disable support for TLS 1.0
- */
-#define POLARSSL_SSL_PROTO_TLS1
-
-/**
- * \def POLARSSL_SSL_PROTO_TLS1_1
- *
- * Enable support for TLS 1.1.
- *
- * Requires: POLARSSL_MD5_C
- * POLARSSL_SHA1_C
- *
- * Comment this macro to disable support for TLS 1.1
- */
-#define POLARSSL_SSL_PROTO_TLS1_1
-
-/**
- * \def POLARSSL_SSL_PROTO_TLS1_2
- *
- * Enable support for TLS 1.2.
- *
- * Requires: POLARSSL_SHA1_C or POLARSSL_SHA256_C or POLARSSL_SHA512_C
- * (Depends on ciphersuites)
- *
- * Comment this macro to disable support for TLS 1.2
- */
-#define POLARSSL_SSL_PROTO_TLS1_2
-
-/**
- * \def POLARSSL_SSL_ALPN
- *
- * Enable support for Application Layer Protocol Negotiation.
- * draft-ietf-tls-applayerprotoneg-05
- *
- * Comment this macro to disable support for ALPN.
- */
-#define POLARSSL_SSL_ALPN
-
-/**
- * \def POLARSSL_SSL_SESSION_TICKETS
- *
- * Enable support for RFC 5077 session tickets in SSL.
- *
- * Requires: POLARSSL_AES_C
- * POLARSSL_SHA256_C
- * POLARSSL_CIPHER_MODE_CBC
- *
- * Comment this macro to disable support for SSL session tickets
- */
-#define POLARSSL_SSL_SESSION_TICKETS
-
-/**
- * \def POLARSSL_SSL_SERVER_NAME_INDICATION
- *
- * Enable support for RFC 6066 server name indication (SNI) in SSL.
- *
- * Comment this macro to disable support for server name indication in SSL
- */
-#define POLARSSL_SSL_SERVER_NAME_INDICATION
-
-/**
- * \def POLARSSL_SSL_TRUNCATED_HMAC
- *
- * Enable support for RFC 6066 truncated HMAC in SSL.
- *
- * Comment this macro to disable support for truncated HMAC in SSL
- */
-#define POLARSSL_SSL_TRUNCATED_HMAC
-
-/**
- * \def POLARSSL_SSL_SET_CURVES
- *
- * Enable ssl_set_curves().
- *
- * This is disabled by default since it breaks binary compatibility with the
- * 1.3.x line. If you choose to enable it, you will need to rebuild your
- * application against the new header files, relinking will not be enough.
- * It will be enabled by default, or no longer an option, in the 1.4 branch.
- *
- * Uncomment to make ssl_set_curves() available.
- */
-//#define POLARSSL_SSL_SET_CURVES
-
-/**
- * \def POLARSSL_THREADING_ALT
- *
- * Provide your own alternate threading implementation.
- *
- * Requires: POLARSSL_THREADING_C
- *
- * Uncomment this to allow your own alternate threading implementation.
- */
-//#define POLARSSL_THREADING_ALT
-
-/**
- * \def POLARSSL_THREADING_PTHREAD
- *
- * Enable the pthread wrapper layer for the threading layer.
- *
- * Requires: POLARSSL_THREADING_C
- *
- * Uncomment this to enable pthread mutexes.
- */
-//#define POLARSSL_THREADING_PTHREAD
-
-/**
- * \def POLARSSL_VERSION_FEATURES
- *
- * Allow run-time checking of compile-time enabled features. Thus allowing users
- * to check at run-time if the library is for instance compiled with threading
- * support via version_check_feature().
- *
- * Requires: POLARSSL_VERSION_C
- *
- * Comment this to disable run-time checking and save ROM space
- */
-#define POLARSSL_VERSION_FEATURES
-
-/**
- * \def POLARSSL_X509_ALLOW_EXTENSIONS_NON_V3
- *
- * If set, the X509 parser will not break-off when parsing an X509 certificate
- * and encountering an extension in a v1 or v2 certificate.
- *
- * Uncomment to prevent an error.
- */
-//#define POLARSSL_X509_ALLOW_EXTENSIONS_NON_V3
-
-/**
- * \def POLARSSL_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
- *
- * If set, the X509 parser will not break-off when parsing an X509 certificate
- * and encountering an unknown critical extension.
- *
- * Uncomment to prevent an error.
- */
-//#define POLARSSL_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
-
-/**
- * \def POLARSSL_X509_CHECK_KEY_USAGE
- *
- * Enable verification of the keyUsage extension (CA and leaf certificates).
- *
- * Disabling this avoids problems with mis-issued and/or misused
- * (intermediate) CA and leaf certificates.
- *
- * \warning Depending on your PKI use, disabling this can be a security risk!
- *
- * Comment to skip keyUsage checking for both CA and leaf certificates.
- */
-#define POLARSSL_X509_CHECK_KEY_USAGE
-
-/**
- * \def POLARSSL_X509_CHECK_EXTENDED_KEY_USAGE
- *
- * Enable verification of the extendedKeyUsage extension (leaf certificates).
- *
- * Disabling this avoids problems with mis-issued and/or misused certificates.
- *
- * \warning Depending on your PKI use, disabling this can be a security risk!
- *
- * Comment to skip extendedKeyUsage checking for certificates.
- */
-#define POLARSSL_X509_CHECK_EXTENDED_KEY_USAGE
-
-/**
- * \def POLARSSL_X509_RSASSA_PSS_SUPPORT
- *
- * Enable parsing and verification of X.509 certificates, CRLs and CSRS
- * signed with RSASSA-PSS (aka PKCS#1 v2.1).
- *
- * Comment this macro to disallow using RSASSA-PSS in certificates.
- */
-#define POLARSSL_X509_RSASSA_PSS_SUPPORT
-
-/**
- * \def POLARSSL_ZLIB_SUPPORT
- *
- * If set, the SSL/TLS module uses ZLIB to support compression and
- * decompression of packet data.
- *
- * \warning TLS-level compression MAY REDUCE SECURITY! See for example the
- * CRIME attack. Before enabling this option, you should examine with care if
- * CRIME or similar exploits may be a applicable to your use case.
- *
- * Used in: library/ssl_tls.c
- * library/ssl_cli.c
- * library/ssl_srv.c
- *
- * This feature requires zlib library and headers to be present.
- *
- * Uncomment to enable use of ZLIB
- */
-//#define POLARSSL_ZLIB_SUPPORT
-/* \} name SECTION: PolarSSL feature support */
-
-/**
- * \name SECTION: PolarSSL modules
- *
- * This section enables or disables entire modules in PolarSSL
- * \{
- */
-
-/**
- * \def POLARSSL_AESNI_C
- *
- * Enable AES-NI support on x86-64.
- *
- * Module: library/aesni.c
- * Caller: library/aes.c
- *
- * Requires: POLARSSL_HAVE_ASM
- *
- * This modules adds support for the AES-NI instructions on x86-64
- */
-//#define POLARSSL_AESNI_C
-
-/**
- * \def POLARSSL_AES_C
- *
- * Enable the AES block cipher.
- *
- * Module: library/aes.c
- * Caller: library/ssl_tls.c
- * library/pem.c
- * library/ctr_drbg.c
- *
- * This module enables the following ciphersuites (if other requisites are
- * enabled as well):
- * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
- * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
- * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
- * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
- * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
- * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
- * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
- * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
- * TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
- * TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
- * TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
- * TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
- * TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
- * TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
- * TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
- * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
- * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
- * TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
- * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
- * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
- * TLS_DHE_RSA_WITH_AES_256_CBC_SHA
- * TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
- * TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
- * TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
- * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
- * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
- * TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
- * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
- * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
- * TLS_DHE_RSA_WITH_AES_128_CBC_SHA
- * TLS_DHE_PSK_WITH_AES_256_GCM_SHA384
- * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384
- * TLS_DHE_PSK_WITH_AES_256_CBC_SHA384
- * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA
- * TLS_DHE_PSK_WITH_AES_256_CBC_SHA
- * TLS_DHE_PSK_WITH_AES_128_GCM_SHA256
- * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256
- * TLS_DHE_PSK_WITH_AES_128_CBC_SHA256
- * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA
- * TLS_DHE_PSK_WITH_AES_128_CBC_SHA
- * TLS_RSA_WITH_AES_256_GCM_SHA384
- * TLS_RSA_WITH_AES_256_CBC_SHA256
- * TLS_RSA_WITH_AES_256_CBC_SHA
- * TLS_RSA_WITH_AES_128_GCM_SHA256
- * TLS_RSA_WITH_AES_128_CBC_SHA256
- * TLS_RSA_WITH_AES_128_CBC_SHA
- * TLS_RSA_PSK_WITH_AES_256_GCM_SHA384
- * TLS_RSA_PSK_WITH_AES_256_CBC_SHA384
- * TLS_RSA_PSK_WITH_AES_256_CBC_SHA
- * TLS_RSA_PSK_WITH_AES_128_GCM_SHA256
- * TLS_RSA_PSK_WITH_AES_128_CBC_SHA256
- * TLS_RSA_PSK_WITH_AES_128_CBC_SHA
- * TLS_PSK_WITH_AES_256_GCM_SHA384
- * TLS_PSK_WITH_AES_256_CBC_SHA384
- * TLS_PSK_WITH_AES_256_CBC_SHA
- * TLS_PSK_WITH_AES_128_GCM_SHA256
- * TLS_PSK_WITH_AES_128_CBC_SHA256
- * TLS_PSK_WITH_AES_128_CBC_SHA
- *
- * PEM_PARSE uses AES for decrypting encrypted keys.
- */
-#define POLARSSL_AES_C
-
-/**
- * \def POLARSSL_ARC4_C
- *
- * Enable the ARCFOUR stream cipher.
- *
- * Module: library/arc4.c
- * Caller: library/ssl_tls.c
- *
- * This module enables the following ciphersuites (if other requisites are
- * enabled as well):
- * TLS_ECDH_ECDSA_WITH_RC4_128_SHA
- * TLS_ECDH_RSA_WITH_RC4_128_SHA
- * TLS_ECDHE_ECDSA_WITH_RC4_128_SHA
- * TLS_ECDHE_RSA_WITH_RC4_128_SHA
- * TLS_ECDHE_PSK_WITH_RC4_128_SHA
- * TLS_DHE_PSK_WITH_RC4_128_SHA
- * TLS_RSA_WITH_RC4_128_SHA
- * TLS_RSA_WITH_RC4_128_MD5
- * TLS_RSA_PSK_WITH_RC4_128_SHA
- * TLS_PSK_WITH_RC4_128_SHA
- */
-#define POLARSSL_ARC4_C
-
-/**
- * \def POLARSSL_ASN1_PARSE_C
- *
- * Enable the generic ASN1 parser.
- *
- * Module: library/asn1.c
- * Caller: library/x509.c
- * library/dhm.c
- * library/pkcs12.c
- * library/pkcs5.c
- * library/pkparse.c
- */
-#define POLARSSL_ASN1_PARSE_C
-
-/**
- * \def POLARSSL_ASN1_WRITE_C
- *
- * Enable the generic ASN1 writer.
- *
- * Module: library/asn1write.c
- * Caller: library/ecdsa.c
- * library/pkwrite.c
- * library/x509_create.c
- * library/x509write_crt.c
- * library/x509write_csr.c
- */
-#define POLARSSL_ASN1_WRITE_C
-
-/**
- * \def POLARSSL_BASE64_C
- *
- * Enable the Base64 module.
- *
- * Module: library/base64.c
- * Caller: library/pem.c
- *
- * This module is required for PEM support (required by X.509).
- */
-#define POLARSSL_BASE64_C
-
-/**
- * \def POLARSSL_BIGNUM_C
- *
- * Enable the multi-precision integer library.
- *
- * Module: library/bignum.c
- * Caller: library/dhm.c
- * library/ecp.c
- * library/ecdsa.c
- * library/rsa.c
- * library/ssl_tls.c
- *
- * This module is required for RSA, DHM and ECC (ECDH, ECDSA) support.
- */
-#define POLARSSL_BIGNUM_C
-
-/**
- * \def POLARSSL_BLOWFISH_C
- *
- * Enable the Blowfish block cipher.
- *
- * Module: library/blowfish.c
- */
-#define POLARSSL_BLOWFISH_C
-
-/**
- * \def POLARSSL_CAMELLIA_C
- *
- * Enable the Camellia block cipher.
- *
- * Module: library/camellia.c
- * Caller: library/ssl_tls.c
- *
- * This module enables the following ciphersuites (if other requisites are
- * enabled as well):
- * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
- * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
- * TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256
- * TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384
- * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
- * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
- * TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256
- * TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384
- * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
- * TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
- * TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
- * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
- * TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384
- * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256
- * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA
- * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
- * TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
- * TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
- * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
- * TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
- * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
- * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA
- * TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384
- * TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
- * TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
- * TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256
- * TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
- * TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
- * TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384
- * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256
- * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA
- * TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256
- * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256
- * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA
- * TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384
- * TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384
- * TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256
- * TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256
- * TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384
- * TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384
- * TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256
- * TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256
- */
-#define POLARSSL_CAMELLIA_C
-
-/**
- * \def POLARSSL_CCM_C
- *
- * Enable the Counter with CBC-MAC (CCM) mode for 128-bit block cipher.
- *
- * Module: library/ccm.c
- *
- * Requires: POLARSSL_AES_C or POLARSSL_CAMELLIA_C
- *
- * This module enables the AES-CCM ciphersuites, if other requisites are
- * enabled as well.
- */
-#define POLARSSL_CCM_C
-
-/**
- * \def POLARSSL_CERTS_C
- *
- * Enable the test certificates.
- *
- * Module: library/certs.c
- * Caller:
- *
- * Requires: POLARSSL_PEM_PARSE_C
- *
- * This module is used for testing (ssl_client/server).
- */
-#define POLARSSL_CERTS_C
-
-/**
- * \def POLARSSL_CIPHER_C
- *
- * Enable the generic cipher layer.
- *
- * Module: library/cipher.c
- * Caller: library/ssl_tls.c
- *
- * Uncomment to enable generic cipher wrappers.
- */
-#define POLARSSL_CIPHER_C
-
-/**
- * \def POLARSSL_CTR_DRBG_C
- *
- * Enable the CTR_DRBG AES-256-based random generator.
- *
- * Module: library/ctr_drbg.c
- * Caller:
- *
- * Requires: POLARSSL_AES_C
- *
- * This module provides the CTR_DRBG AES-256 random number generator.
- */
-#define POLARSSL_CTR_DRBG_C
-
-/**
- * \def POLARSSL_DEBUG_C
- *
- * Enable the debug functions.
- *
- * Module: library/debug.c
- * Caller: library/ssl_cli.c
- * library/ssl_srv.c
- * library/ssl_tls.c
- *
- * This module provides debugging functions.
- */
-#define POLARSSL_DEBUG_C
-
-/**
- * \def POLARSSL_DES_C
- *
- * Enable the DES block cipher.
- *
- * Module: library/des.c
- * Caller: library/pem.c
- * library/ssl_tls.c
- *
- * This module enables the following ciphersuites (if other requisites are
- * enabled as well):
- * TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
- * TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
- * TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
- * TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
- * TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
- * TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA
- * TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA
- * TLS_RSA_WITH_3DES_EDE_CBC_SHA
- * TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA
- * TLS_PSK_WITH_3DES_EDE_CBC_SHA
- *
- * PEM_PARSE uses DES/3DES for decrypting encrypted keys.
- */
-#define POLARSSL_DES_C
-
-/**
- * \def POLARSSL_DHM_C
- *
- * Enable the Diffie-Hellman-Merkle module.
- *
- * Module: library/dhm.c
- * Caller: library/ssl_cli.c
- * library/ssl_srv.c
- *
- * This module is used by the following key exchanges:
- * DHE-RSA, DHE-PSK
- */
-#define POLARSSL_DHM_C
-
-/**
- * \def POLARSSL_ECDH_C
- *
- * Enable the elliptic curve Diffie-Hellman library.
- *
- * Module: library/ecdh.c
- * Caller: library/ssl_cli.c
- * library/ssl_srv.c
- *
- * This module is used by the following key exchanges:
- * ECDHE-ECDSA, ECDHE-RSA, DHE-PSK
- *
- * Requires: POLARSSL_ECP_C
- */
-#define POLARSSL_ECDH_C
-
-/**
- * \def POLARSSL_ECDSA_C
- *
- * Enable the elliptic curve DSA library.
- *
- * Module: library/ecdsa.c
- * Caller:
- *
- * This module is used by the following key exchanges:
- * ECDHE-ECDSA
- *
- * Requires: POLARSSL_ECP_C, POLARSSL_ASN1_WRITE_C, POLARSSL_ASN1_PARSE_C
- */
-#define POLARSSL_ECDSA_C
-
-/**
- * \def POLARSSL_ECP_C
- *
- * Enable the elliptic curve over GF(p) library.
- *
- * Module: library/ecp.c
- * Caller: library/ecdh.c
- * library/ecdsa.c
- *
- * Requires: POLARSSL_BIGNUM_C and at least one POLARSSL_ECP_DP_XXX_ENABLED
- */
-#define POLARSSL_ECP_C
-
-/**
- * \def POLARSSL_ENTROPY_C
- *
- * Enable the platform-specific entropy code.
- *
- * Module: library/entropy.c
- * Caller:
- *
- * Requires: POLARSSL_SHA512_C or POLARSSL_SHA256_C
- *
- * This module provides a generic entropy pool
- */
-#define POLARSSL_ENTROPY_C
-
-/**
- * \def POLARSSL_ERROR_C
- *
- * Enable error code to error string conversion.
- *
- * Module: library/error.c
- * Caller:
- *
- * This module enables polarssl_strerror().
- */
-#define POLARSSL_ERROR_C
-
-/**
- * \def POLARSSL_GCM_C
- *
- * Enable the Galois/Counter Mode (GCM) for AES.
- *
- * Module: library/gcm.c
- *
- * Requires: POLARSSL_AES_C or POLARSSL_CAMELLIA_C
- *
- * This module enables the AES-GCM and CAMELLIA-GCM ciphersuites, if other
- * requisites are enabled as well.
- */
-#define POLARSSL_GCM_C
-
-/**
- * \def POLARSSL_HAVEGE_C
- *
- * Enable the HAVEGE random generator.
- *
- * Warning: the HAVEGE random generator is not suitable for virtualized
- * environments
- *
- * Warning: the HAVEGE random generator is dependent on timing and specific
- * processor traits. It is therefore not advised to use HAVEGE as
- * your applications primary random generator or primary entropy pool
- * input. As a secondary input to your entropy pool, it IS able add
- * the (limited) extra entropy it provides.
- *
- * Module: library/havege.c
- * Caller:
- *
- * Requires: POLARSSL_TIMING_C
- *
- * Uncomment to enable the HAVEGE random generator.
- */
-//#define POLARSSL_HAVEGE_C
-
-/**
- * \def POLARSSL_HMAC_DRBG_C
- *
- * Enable the HMAC_DRBG random generator.
- *
- * Module: library/hmac_drbg.c
- * Caller:
- *
- * Requires: POLARSSL_MD_C
- *
- * Uncomment to enable the HMAC_DRBG random number geerator.
- */
-#define POLARSSL_HMAC_DRBG_C
-
-/**
- * \def POLARSSL_MD_C
- *
- * Enable the generic message digest layer.
- *
- * Module: library/md.c
- * Caller:
- *
- * Uncomment to enable generic message digest wrappers.
- */
-#define POLARSSL_MD_C
-
-/**
- * \def POLARSSL_MD2_C
- *
- * Enable the MD2 hash algorithm.
- *
- * Module: library/md2.c
- * Caller:
- *
- * Uncomment to enable support for (rare) MD2-signed X.509 certs.
- */
-//#define POLARSSL_MD2_C
-
-/**
- * \def POLARSSL_MD4_C
- *
- * Enable the MD4 hash algorithm.
- *
- * Module: library/md4.c
- * Caller:
- *
- * Uncomment to enable support for (rare) MD4-signed X.509 certs.
- */
-//#define POLARSSL_MD4_C
-
-/**
- * \def POLARSSL_MD5_C
- *
- * Enable the MD5 hash algorithm.
- *
- * Module: library/md5.c
- * Caller: library/md.c
- * library/pem.c
- * library/ssl_tls.c
- *
- * This module is required for SSL/TLS and X.509.
- * PEM_PARSE uses MD5 for decrypting encrypted keys.
- */
-#define POLARSSL_MD5_C
-
-/**
- * \def POLARSSL_MEMORY_C
- * Deprecated since 1.3.5. Please use POLARSSL_PLATFORM_MEMORY instead.
- */
-//#define POLARSSL_MEMORY_C
-
-/**
- * \def POLARSSL_MEMORY_BUFFER_ALLOC_C
- *
- * Enable the buffer allocator implementation that makes use of a (stack)
- * based buffer to 'allocate' dynamic memory. (replaces malloc() and free()
- * calls)
- *
- * Module: library/memory_buffer_alloc.c
- *
- * Requires: POLARSSL_PLATFORM_C
- * POLARSSL_PLATFORM_MEMORY (to use it within PolarSSL)
- *
- * Enable this module to enable the buffer memory allocator.
- */
-//#define POLARSSL_MEMORY_BUFFER_ALLOC_C
-
-/**
- * \def POLARSSL_NET_C
- *
- * Enable the TCP/IP networking routines.
- *
- * Module: library/net.c
- *
- * This module provides TCP/IP networking routines.
- */
-#define POLARSSL_NET_C
-
-/**
- * \def POLARSSL_OID_C
- *
- * Enable the OID database.
- *
- * Module: library/oid.c
- * Caller: library/asn1write.c
- * library/pkcs5.c
- * library/pkparse.c
- * library/pkwrite.c
- * library/rsa.c
- * library/x509.c
- * library/x509_create.c
- * library/x509_crl.c
- * library/x509_crt.c
- * library/x509_csr.c
- * library/x509write_crt.c
- * library/x509write_csr.c
- *
- * This modules translates between OIDs and internal values.
- */
-#define POLARSSL_OID_C
-
-/**
- * \def POLARSSL_PADLOCK_C
- *
- * Enable VIA Padlock support on x86.
- *
- * Module: library/padlock.c
- * Caller: library/aes.c
- *
- * Requires: POLARSSL_HAVE_ASM
- *
- * This modules adds support for the VIA PadLock on x86.
- */
-//#define POLARSSL_PADLOCK_C
-
-/**
- * \def POLARSSL_PBKDF2_C
- *
- * Enable PKCS#5 PBKDF2 key derivation function.
- * DEPRECATED: Use POLARSSL_PKCS5_C instead
- *
- * Module: library/pbkdf2.c
- *
- * Requires: POLARSSL_PKCS5_C
- *
- * This module adds support for the PKCS#5 PBKDF2 key derivation function.
- */
-#define POLARSSL_PBKDF2_C
-
-/**
- * \def POLARSSL_PEM_PARSE_C
- *
- * Enable PEM decoding / parsing.
- *
- * Module: library/pem.c
- * Caller: library/dhm.c
- * library/pkparse.c
- * library/x509_crl.c
- * library/x509_crt.c
- * library/x509_csr.c
- *
- * Requires: POLARSSL_BASE64_C
- *
- * This modules adds support for decoding / parsing PEM files.
- */
-#define POLARSSL_PEM_PARSE_C
-
-/**
- * \def POLARSSL_PEM_WRITE_C
- *
- * Enable PEM encoding / writing.
- *
- * Module: library/pem.c
- * Caller: library/pkwrite.c
- * library/x509write_crt.c
- * library/x509write_csr.c
- *
- * Requires: POLARSSL_BASE64_C
- *
- * This modules adds support for encoding / writing PEM files.
- */
-#define POLARSSL_PEM_WRITE_C
-
-/**
- * \def POLARSSL_PK_C
- *
- * Enable the generic public (asymetric) key layer.
- *
- * Module: library/pk.c
- * Caller: library/ssl_tls.c
- * library/ssl_cli.c
- * library/ssl_srv.c
- *
- * Requires: POLARSSL_RSA_C or POLARSSL_ECP_C
- *
- * Uncomment to enable generic public key wrappers.
- */
-#define POLARSSL_PK_C
-
-/**
- * \def POLARSSL_PK_PARSE_C
- *
- * Enable the generic public (asymetric) key parser.
- *
- * Module: library/pkparse.c
- * Caller: library/x509_crt.c
- * library/x509_csr.c
- *
- * Requires: POLARSSL_PK_C
- *
- * Uncomment to enable generic public key parse functions.
- */
-#define POLARSSL_PK_PARSE_C
-
-/**
- * \def POLARSSL_PK_WRITE_C
- *
- * Enable the generic public (asymetric) key writer.
- *
- * Module: library/pkwrite.c
- * Caller: library/x509write.c
- *
- * Requires: POLARSSL_PK_C
- *
- * Uncomment to enable generic public key write functions.
- */
-#define POLARSSL_PK_WRITE_C
-
-/**
- * \def POLARSSL_PKCS5_C
- *
- * Enable PKCS#5 functions.
- *
- * Module: library/pkcs5.c
- *
- * Requires: POLARSSL_MD_C
- *
- * This module adds support for the PKCS#5 functions.
- */
-#define POLARSSL_PKCS5_C
-
-/**
- * \def POLARSSL_PKCS11_C
- *
- * Enable wrapper for PKCS#11 smartcard support.
- *
- * Module: library/pkcs11.c
- * Caller: library/pk.c
- *
- * Requires: POLARSSL_PK_C
- *
- * This module enables SSL/TLS PKCS #11 smartcard support.
- * Requires the presence of the PKCS#11 helper library (libpkcs11-helper)
- */
-//#define POLARSSL_PKCS11_C
-
-/**
- * \def POLARSSL_PKCS12_C
- *
- * Enable PKCS#12 PBE functions.
- * Adds algorithms for parsing PKCS#8 encrypted private keys
- *
- * Module: library/pkcs12.c
- * Caller: library/pkparse.c
- *
- * Requires: POLARSSL_ASN1_PARSE_C, POLARSSL_CIPHER_C, POLARSSL_MD_C
- * Can use: POLARSSL_ARC4_C
- *
- * This module enables PKCS#12 functions.
- */
-#define POLARSSL_PKCS12_C
-
-/**
- * \def POLARSSL_PLATFORM_C
- *
- * Enable the platform abstraction layer that allows you to re-assign
- * functions like malloc(), free(), printf(), fprintf()
- *
- * Module: library/platform.c
- * Caller: Most other .c files
- *
- * This module enables abstraction of common (libc) functions.
- */
-//#define POLARSSL_PLATFORM_C
-
-/**
- * \def POLARSSL_RIPEMD160_C
- *
- * Enable the RIPEMD-160 hash algorithm.
- *
- * Module: library/ripemd160.c
- * Caller: library/md.c
- *
- */
-#define POLARSSL_RIPEMD160_C
-
-/**
- * \def POLARSSL_RSA_C
- *
- * Enable the RSA public-key cryptosystem.
- *
- * Module: library/rsa.c
- * Caller: library/ssl_cli.c
- * library/ssl_srv.c
- * library/ssl_tls.c
- * library/x509.c
- *
- * This module is used by the following key exchanges:
- * RSA, DHE-RSA, ECDHE-RSA, RSA-PSK
- *
- * Requires: POLARSSL_BIGNUM_C, POLARSSL_OID_C
- */
-#define POLARSSL_RSA_C
-
-/**
- * \def POLARSSL_SHA1_C
- *
- * Enable the SHA1 cryptographic hash algorithm.
- *
- * Module: library/sha1.c
- * Caller: library/md.c
- * library/ssl_cli.c
- * library/ssl_srv.c
- * library/ssl_tls.c
- * library/x509write_crt.c
- *
- * This module is required for SSL/TLS and SHA1-signed certificates.
- */
-#define POLARSSL_SHA1_C
-
-/**
- * \def POLARSSL_SHA256_C
- *
- * Enable the SHA-224 and SHA-256 cryptographic hash algorithms.
- * (Used to be POLARSSL_SHA2_C)
- *
- * Module: library/sha256.c
- * Caller: library/entropy.c
- * library/md.c
- * library/ssl_cli.c
- * library/ssl_srv.c
- * library/ssl_tls.c
- *
- * This module adds support for SHA-224 and SHA-256.
- * This module is required for the SSL/TLS 1.2 PRF function.
- */
-#define POLARSSL_SHA256_C
-
-/**
- * \def POLARSSL_SHA512_C
- *
- * Enable the SHA-384 and SHA-512 cryptographic hash algorithms.
- * (Used to be POLARSSL_SHA4_C)
- *
- * Module: library/sha512.c
- * Caller: library/entropy.c
- * library/md.c
- * library/ssl_cli.c
- * library/ssl_srv.c
- *
- * This module adds support for SHA-384 and SHA-512.
- */
-#define POLARSSL_SHA512_C
-
-/**
- * \def POLARSSL_SSL_CACHE_C
- *
- * Enable simple SSL cache implementation.
- *
- * Module: library/ssl_cache.c
- * Caller:
- *
- * Requires: POLARSSL_SSL_CACHE_C
- */
-#define POLARSSL_SSL_CACHE_C
-
-/**
- * \def POLARSSL_SSL_CLI_C
- *
- * Enable the SSL/TLS client code.
- *
- * Module: library/ssl_cli.c
- * Caller:
- *
- * Requires: POLARSSL_SSL_TLS_C
- *
- * This module is required for SSL/TLS client support.
- */
-#define POLARSSL_SSL_CLI_C
-
-/**
- * \def POLARSSL_SSL_SRV_C
- *
- * Enable the SSL/TLS server code.
- *
- * Module: library/ssl_srv.c
- * Caller:
- *
- * Requires: POLARSSL_SSL_TLS_C
- *
- * This module is required for SSL/TLS server support.
- */
-#define POLARSSL_SSL_SRV_C
-
-/**
- * \def POLARSSL_SSL_TLS_C
- *
- * Enable the generic SSL/TLS code.
- *
- * Module: library/ssl_tls.c
- * Caller: library/ssl_cli.c
- * library/ssl_srv.c
- *
- * Requires: POLARSSL_CIPHER_C, POLARSSL_MD_C
- * and at least one of the POLARSSL_SSL_PROTO_* defines
- *
- * This module is required for SSL/TLS.
- */
-#define POLARSSL_SSL_TLS_C
-
-/**
- * \def POLARSSL_THREADING_C
- *
- * Enable the threading abstraction layer.
- * By default PolarSSL assumes it is used in a non-threaded environment or that
- * contexts are not shared between threads. If you do intend to use contexts
- * between threads, you will need to enable this layer to prevent race
- * conditions.
- *
- * Module: library/threading.c
- *
- * This allows different threading implementations (self-implemented or
- * provided).
- *
- * You will have to enable either POLARSSL_THREADING_ALT or
- * POLARSSL_THREADING_PTHREAD.
- *
- * Enable this layer to allow use of mutexes within PolarSSL
- */
-//#define POLARSSL_THREADING_C
-
-/**
- * \def POLARSSL_TIMING_C
- *
- * Enable the portable timing interface.
- *
- * Module: library/timing.c
- * Caller: library/havege.c
- *
- * This module is used by the HAVEGE random number generator.
- */
-#define POLARSSL_TIMING_C
-
-/**
- * \def POLARSSL_VERSION_C
- *
- * Enable run-time version information.
- *
- * Module: library/version.c
- *
- * This module provides run-time version information.
- */
-#define POLARSSL_VERSION_C
-
-/**
- * \def POLARSSL_X509_USE_C
- *
- * Enable X.509 core for using certificates.
- *
- * Module: library/x509.c
- * Caller: library/x509_crl.c
- * library/x509_crt.c
- * library/x509_csr.c
- *
- * Requires: POLARSSL_ASN1_PARSE_C, POLARSSL_BIGNUM_C, POLARSSL_OID_C,
- * POLARSSL_PK_PARSE_C
- *
- * This module is required for the X.509 parsing modules.
- */
-#define POLARSSL_X509_USE_C
-
-/**
- * \def POLARSSL_X509_CRT_PARSE_C
- *
- * Enable X.509 certificate parsing.
- *
- * Module: library/x509_crt.c
- * Caller: library/ssl_cli.c
- * library/ssl_srv.c
- * library/ssl_tls.c
- *
- * Requires: POLARSSL_X509_USE_C
- *
- * This module is required for X.509 certificate parsing.
- */
-#define POLARSSL_X509_CRT_PARSE_C
-
-/**
- * \def POLARSSL_X509_CRL_PARSE_C
- *
- * Enable X.509 CRL parsing.
- *
- * Module: library/x509_crl.c
- * Caller: library/x509_crt.c
- *
- * Requires: POLARSSL_X509_USE_C
- *
- * This module is required for X.509 CRL parsing.
- */
-#define POLARSSL_X509_CRL_PARSE_C
-
-/**
- * \def POLARSSL_X509_CSR_PARSE_C
- *
- * Enable X.509 Certificate Signing Request (CSR) parsing.
- *
- * Module: library/x509_csr.c
- * Caller: library/x509_crt_write.c
- *
- * Requires: POLARSSL_X509_USE_C
- *
- * This module is used for reading X.509 certificate request.
- */
-#define POLARSSL_X509_CSR_PARSE_C
-
-/**
- * \def POLARSSL_X509_CREATE_C
- *
- * Enable X.509 core for creating certificates.
- *
- * Module: library/x509_create.c
- *
- * Requires: POLARSSL_BIGNUM_C, POLARSSL_OID_C, POLARSSL_PK_WRITE_C
- *
- * This module is the basis for creating X.509 certificates and CSRs.
- */
-#define POLARSSL_X509_CREATE_C
-
-/**
- * \def POLARSSL_X509_CRT_WRITE_C
- *
- * Enable creating X.509 certificates.
- *
- * Module: library/x509_crt_write.c
- *
- * Requires: POLARSSL_CREATE_C
- *
- * This module is required for X.509 certificate creation.
- */
-#define POLARSSL_X509_CRT_WRITE_C
-
-/**
- * \def POLARSSL_X509_CSR_WRITE_C
- *
- * Enable creating X.509 Certificate Signing Requests (CSR).
- *
- * Module: library/x509_csr_write.c
- *
- * Requires: POLARSSL_CREATE_C
- *
- * This module is required for X.509 certificate request writing.
- */
-#define POLARSSL_X509_CSR_WRITE_C
-
-/**
- * \def POLARSSL_XTEA_C
- *
- * Enable the XTEA block cipher.
- *
- * Module: library/xtea.c
- * Caller:
- */
-#define POLARSSL_XTEA_C
-
-/* \} name SECTION: PolarSSL modules */
-
-/**
- * \name SECTION: Module configuration options
- *
- * This section allows for the setting of module specific sizes and
- * configuration options. The default values are already present in the
- * relevant header files and should suffice for the regular use cases.
- *
- * Our advice is to enable options and change their values here
- * only if you have a good reason and know the consequences.
- *
- * Please check the respective header file for documentation on these
- * parameters (to prevent duplicate documentation).
- * \{
- */
-
-/* MPI / BIGNUM options */
-//#define POLARSSL_MPI_WINDOW_SIZE 6 /**< Maximum windows size used. */
-//#define POLARSSL_MPI_MAX_SIZE 1024 /**< Maximum number of bytes for usable MPIs. */
-
-/* CTR_DRBG options */
-//#define CTR_DRBG_ENTROPY_LEN 48 /**< Amount of entropy used per seed by default (48 with SHA-512, 32 with SHA-256) */
-//#define CTR_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */
-//#define CTR_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */
-//#define CTR_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */
-//#define CTR_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */
-
-/* HMAC_DRBG options */
-//#define POLARSSL_HMAC_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */
-//#define POLARSSL_HMAC_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */
-//#define POLARSSL_HMAC_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */
-//#define POLARSSL_HMAC_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */
-
-/* ECP options */
-//#define POLARSSL_ECP_MAX_BITS 521 /**< Maximum bit size of groups */
-//#define POLARSSL_ECP_WINDOW_SIZE 6 /**< Maximum window size used */
-//#define POLARSSL_ECP_FIXED_POINT_OPTIM 1 /**< Enable fixed-point speed-up */
-
-/* Entropy options */
-//#define ENTROPY_MAX_SOURCES 20 /**< Maximum number of sources supported */
-//#define ENTROPY_MAX_GATHER 128 /**< Maximum amount requested from entropy sources */
-
-/* Memory buffer allocator options */
-//#define POLARSSL_MEMORY_ALIGN_MULTIPLE 4 /**< Align on multiples of this value */
-
-/* Platform options */
-//#define POLARSSL_PLATFORM_STD_MEM_HDR <stdlib.h> /**< Header to include if POLARSSL_PLATFORM_NO_STD_FUNCTIONS is defined. Don't define if no header is needed. */
-//#define POLARSSL_PLATFORM_STD_MALLOC malloc /**< Default allocator to use, can be undefined */
-//#define POLARSSL_PLATFORM_STD_FREE free /**< Default free to use, can be undefined */
-//#define POLARSSL_PLATFORM_STD_PRINTF printf /**< Default printf to use, can be undefined */
-//#define POLARSSL_PLATFORM_STD_FPRINTF fprintf /**< Default fprintf to use, can be undefined */
-
-/* SSL Cache options */
-//#define SSL_CACHE_DEFAULT_TIMEOUT 86400 /**< 1 day */
-//#define SSL_CACHE_DEFAULT_MAX_ENTRIES 50 /**< Maximum entries in cache */
-
-/* SSL options */
-//#define SSL_MAX_CONTENT_LEN 16384 /**< Size of the input / output buffer */
-//#define SSL_DEFAULT_TICKET_LIFETIME 86400 /**< Lifetime of session tickets (if enabled) */
-//#define POLARSSL_PSK_MAX_LEN 32 /**< Max size of TLS pre-shared keys, in bytes (default 256 bits) */
-
-/**
- * Complete list of ciphersuites to use, in order of preference.
- *
- * \warning No dependency checking is done on that field! This option can only
- * be used to restrict the set of available ciphersuites. It is your
- * responsibility to make sure the needed modules are active.
- *
- * Use this to save a few hundred bytes of ROM (default ordering of all
- * available ciphersuites) and a few to a few hundred bytes of RAM.
- *
- * The value below is only an example, not the default.
- */
-//#define SSL_CIPHERSUITES TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
-
-/* Debug options */
-//#define POLARSSL_DEBUG_DFL_MODE POLARSSL_DEBUG_LOG_FULL /**< Default log: Full or Raw */
-
-/* \} name SECTION: Module configuration options */
-
-
-#endif /* POLARSSL_CONFIG_H */
projects / proxmark3-svn / blobdiff