]> git.zerfleddert.de Git - usb-driver/blame - README
add link to xc3sprog
[usb-driver] / README
CommitLineData
54357994 1This library emulates Jungo Windrvr USB and parallel port functions in
2userspace which are required by XILINX impact to access the Platform cable USB
3and Parallel Cable III.
4With this library it is possible to access the cables without loading a
5proprietary kernel module which breaks with every new kernel release. It uses
6f766a61 6the functionality provided by the libusb userspace library for USB access and
54357994 7the kernel interface at /dev/parport0 for parallel port access instead and
8should work on every kernel version which is supported by libusb and supports
9ppdev. It was written against impact from ISE Webpack 9.1SP1 and tested with
10the following software:
0b50c513 11
7824bbf6 12 * ISE Webpack 9.1SP3
0b50c513 13 * ISE Webpack 9.1SP2
14 * ISE Webpack 9.1SP1
54fc4508 15 * ISE Webpack 8.2SP3
0b50c513 16 * ISE Webpack 8.1SP3
3b1b5fa8 17 * ChipScope 9.1.03i
0b50c513 18 * ChipScope 9.1.02i
3b1b5fa8 19 * ChipScope 8.2.04i
54fc4508 20 * EDK 8.2.02i
113af964 21
22Build the library by calling `make'.
23
24To use this library you have to preload the library before starting impact:
25
26$ LD_PRELOAD=/path/to/libusb-driver.so impact
27or
28$ export LD_PRELOAD=/path/to/libusb-driver.so (for sh shells)
29$ setenv LD_PRELOAD /path/to/libusb-driver.so (for csh shells)
30$ impact
fdd05738 31
45b9b80b 32The source for this library can be found at:
33http://cvs.zerfleddert.de/cgi-bin/viewcvs.cgi/usb-driver/
34
32e2af23 35The main website is located at:
36http://www.rmdir.de/~michael/xilinx/
37
54357994 38
39Notes for the USB cable
40=======================
41
42To use the device as an ordinary user, put the following line in a new
fdd05738 43file in /etc/udev/rules.d/ and restart udev:
44ACTION=="add", BUS=="usb", SYSFS{idVendor}=="03fd", MODE="666"
979132fe 45
46
47If your cable does not have the ID 03fd:0008 in the output of lsusb,
48the initial firmware has not been loaded (loading it changes the
49product-ID from another value to 8). To load the firmware follow
50these steps:
51
c2e95a30 521. If you have no /etc/udev/rules.d/xusbdfwu.rules file, copy it from
53 /path/to/ISE/bin/lin/xusbdfwu.rules to /etc/udev/rules.d/xusbdfwu.rules
979132fe 54
552. Install the package containing /sbin/fxload from your linux distribution.
56 It is usually called "fxload"
57
583. copy the file /path/to/ISE/bin/lin/xusbdfwu.hex to /usr/share/xusbdfwu.hex
59
604. restart udev and re-plug the cable
54357994 61
62
63Notes for the parallel cable
64============================
65
66To access the parallel port from userspace, the kernel needs to be built with
67the features "Parallel port support" (CONFIG_PARPORT), "PC-style hardware"
68(CONFIG_PARPORT_PC) and "Support for user-space parallel port device drivers"
69(CONFIG_PPDEV) builtin or as modules. If these features are built as modules,
70they need to be loaded before using this library.
71These modules are called:
72parport
73parport_pc
74ppdev
75
76
77To use the device as an ordinary user, put the user in the group 'lp'
6f766a61 78
79
cdc9c5bf 80If you have an almost compatible cable which works with other software but not
05e1bfcd 81with Impact, try adding -DFORCE_PC3_IDENT to the CFLAGS line in the Makefile.
82This enables a hack by Stefan Ziegenbalg to force detection of a parallel cable.
cdc9c5bf 83
84
6f766a61 85Parallel Cable IV is currently only supported in 'compatibility mode', as no
86attempt to configure the ECP registers is done by this library.
0c71f276 87
88
89If you get "Programming failed" or "DONE did not go high" when programming
90through the parallel cable with Impact 9.1, make sure to have the option "Use
91HIGHZ instead of BYPASS" enabled in Edit -> Preferences -> iMPACT Configuration
92Preferences.
93If you are using batch mode, add the following line to your cmd file:
94setPreference -pref UseHighz:TRUE
95(This problem also occurs on windows and when using the real windrvr in linux and
96is solved with the same workaround. Impact 8.2 is working fine with the same
97boards and designs)
Impressum, Datenschutz