[fnordlicht-mini] / firmware / fnordlicht-firmware / config.mk.template

# Put your own config here!
#
# This file is not under version control, and your settings
# will not be modified when upgrading the repository


###################################################################
# HARDWARE PLATFORM TYPE
#
# possible values:
# - fnordlicht -- original fnordlicht hardware
# - fnordlichtmini -- fnordlichtmini hardware
#HARDWARE = fnordlicht

# default program
#
# possible values:
# - 0   -- colorwheel
# - 1   -- random colors   (default)
#CONFIG_SCRIPT_DEFAULT = 1

###################################################################
# PROGRAMMER
#
# avrdude programmer protocol
#PROG = usbasp

# avrdude programmer device
#DEV = usb

# further flags for avrdude
#AVRDUDE_FLAGS =


###################################################################
# controller
#
# possible values:
# - atmega8
# - atmega88
# - atmega168
#
#MCU = atmega8

# frequency
#F_CPU = 16000000UL

# use more debug-flags when compiling
#DEBUG = 1

###################################################################
# FIRMWARE CONFIGURATION
#

# include the script interpreter
#CONFIG_SCRIPT = 1

# include uart support
#CONFIG_SERIAL = 1

# include remote command support (needs uart)
#CONFIG_REMOTE = 1

# secondary pwm output
#CONFIG_SECONDARY_PWM = 1

# default baudrate
#CONFIG_SERIAL_BAUDRATE = 19200

# configure master mode:
#   0   disable master mode completely
#   1   check if master mode jumper is set (default)
#   2   always act as master
#CONFIG_MASTER_MODE = 1
Commit	Line	Data
ec1bef8e	1	# Put your own config here!
	2	#
	3	# This file is not under version control, and your settings
	4	# will not be modified when upgrading the repository
	5
	6
	7	###################################################################
	8	# HARDWARE PLATFORM TYPE
	9	#
	10	# possible values:
	11	# - fnordlicht -- original fnordlicht hardware
	12	# - fnordlichtmini -- fnordlichtmini hardware
	13	#HARDWARE = fnordlicht
	14
	15	# default program
	16	#
	17	# possible values:
	18	# - 0 -- colorwheel
	19	# - 1 -- random colors (default)
	20	#CONFIG_SCRIPT_DEFAULT = 1
	21
	22	###################################################################
	23	# PROGRAMMER
	24	#
	25	# avrdude programmer protocol
	26	#PROG = usbasp
	27
	28	# avrdude programmer device
	29	#DEV = usb
	30
	31	# further flags for avrdude
	32	#AVRDUDE_FLAGS =
	33
	34
	35	###################################################################
	36	# controller
	37	#
	38	# possible values:
	39	# - atmega8
	40	# - atmega88
	41	# - atmega168
	42	#
	43	#MCU = atmega8
	44
	45	# frequency
	46	#F_CPU = 16000000UL
	47
	48	# use more debug-flags when compiling
	49	#DEBUG = 1
	50
	51	###################################################################
	52	# FIRMWARE CONFIGURATION
	53	#
	54
	55	# include the script interpreter
	56	#CONFIG_SCRIPT = 1
	57
	58	# include uart support
	59	#CONFIG_SERIAL = 1
	60
	61	# include remote command support (needs uart)
	62	#CONFIG_REMOTE = 1
	63
	64	# secondary pwm output
65	#CONFIG_SECONDARY_PWM = 1
66
67	# default baudrate
68	#CONFIG_SERIAL_BAUDRATE = 19200
69
70	# configure master mode:
71	# 0 disable master mode completely
72	# 1 check if master mode jumper is set (default)
73	# 2 always act as master
74	#CONFIG_MASTER_MODE = 1