+int parse_addr(char *ad)
+{
+ int addr = -1;
+ char ad_fixed[5];
+ char *ep;
+ unsigned long val;
+ int i;
+
+ if (ad == NULL)
+ return -1;
+
+ switch(strlen(ad)) {
+ case 4:
+ if (strncmp(ad, "0x", 2)) {
+ memset(ad_fixed, 0, sizeof(ad_fixed));
+ for (i = 0; i < 4; i++) {
+ if ((ad[i] < '1') || (ad[i] > '4')) {
+ fprintf(stderr, "Not a valid ELV address: %s\n", ad);
+ return -1;
+ }
+ ad_fixed[i] = ad[i] - 1;
+ val = strtoul(ad_fixed, &ep, 4);
+
+ if (*ep != '\0') {
+ fprintf(stderr, "Can't parse fixed ELV housecode: %s\n", ad_fixed);
+ return -1;
+ }
+ }
+
+ break;
+ }
+ case 2:
+ val = strtoul(ad, &ep, 16);
+ if (*ep != '\0') {
+ fprintf(stderr, "Not a 1 byte hexstring: %s\n", ad);
+ return -1;
+ }
+ break;
+ default:
+ fprintf(stderr, "Address has to be in hex (01, 0x01) or ELV (1112) format!\n");
+ return -1;
+ break;
+ }
+
+ addr = val & 0xff;
+
+ return addr;
+}
+
+void syntax(char *prog)
+{
+ fprintf(stderr, "Syntax: %s options\n\n", prog);
+ fprintf(stderr, "Possible options:\n");
+ fprintf(stderr, "\t-V\t\trequest firmware-version\n");
+ fprintf(stderr, "\t-x\t\tabort sending long press\n");
+ fprintf(stderr, "\t-h [ELV|hex]\thousecode in ELV- or hex-notation\n");
+ fprintf(stderr, "The following actions need an housecode:\n");
+ fprintf(stderr, "\t-a [ELV|hex]\t\tsend commands to device at specified address\n");
+ fprintf(stderr, "\t-s hex\t\tsend command byte\n");
+ fprintf(stderr, "\t-e hex\t\textension byte for command\n");
+ fprintf(stderr, "\t-r n\t\trepeat sending n times\n");
+ fprintf(stderr, "\nCommand bytes (without extension byte):\n");
+ fprintf(stderr, "0x00\t\tswitch off\n");
+ fprintf(stderr, "0x01-0x10\tswitch on dimmed (0x01: 6.25%%, 0x02: 12.5%%, ..., 0x10: 100%%)\n");
+ fprintf(stderr, "0x11\t\tswitch on\n");
+ fprintf(stderr, "0x12\t\ttoggle\n");
+ fprintf(stderr, "0x13\t\tdimup\n");
+ fprintf(stderr, "0x14\t\tdimdown\n");
+ fprintf(stderr, "0x15\t\tdimup, pause, dimdown, pause, ...\n");
+ fprintf(stderr, "0x16\t\tstart/stop programming internal timer\n");
+ fprintf(stderr, "0x17\t\tlearn housecode/address\n");
+ fprintf(stderr, "0x18\t\toff for internal timer, then back on with current level\n");
+ fprintf(stderr, "0x19\t\ton (100%%) for internal timer, then off\n");
+ fprintf(stderr, "0x1a\t\ton (old level) for internal timer, then off\n");
+ fprintf(stderr, "0x1b\t\tfactory reset\n");
+ fprintf(stderr, "0x1e\t\ton (100%%) for internal timer, then old level\n");
+ fprintf(stderr, "0x1f\t\ton (old level) for internal timer, then old state\n");
+ fprintf(stderr, "\nCommand bytes (with timer as extension byte):\n");
+ fprintf(stderr, "0x20\t\tdim down to off while timer is running\n");
+ fprintf(stderr, "0x21-0x30\tdim to (0x01: 6.25%%, 0x02: 12.5%%, ..., 0x10: 100%%) while timer is running\n");
+ fprintf(stderr, "0x31\t\tdim to last level while timer is running\n");
+ fprintf(stderr, "0x32\t\tdim to off, then after timer dim to off\n");
+ fprintf(stderr, "0x33\t\tdimup now and switch off after timer\n");
+ fprintf(stderr, "0x34\t\tdimdown now and switch off after timer\n");
+ fprintf(stderr, "0x35\t\tdimup or dimdown (toggle) and switch off after timer\n");
+ fprintf(stderr, "0x36\t\tprogram internal timer\n");
+ fprintf(stderr, "0x38\t\toff for timer, then back on with current level\n");
+ fprintf(stderr, "0x39\t\ton (100%%) for timer, then off\n");
+ fprintf(stderr, "0x3a\t\ton (old level) for timer, then off\n");
+ fprintf(stderr, "0x3c\t\tprogram internal ramp-up-time\n");
+ fprintf(stderr, "0x3d\t\tprogram internal ramp-down-time\n");
+ fprintf(stderr, "0x3e\t\ton (100%%) for timer, then old level\n");
+ fprintf(stderr, "0x3f\t\ton (old level) for timer, then old state\n");
+};
+
+enum {
+ NO_ACTION,
+ REQUEST_FIRMWARE,
+ SEND_COMMAND,
+ ABORT_LONG_PRESS
+};
+
+#define DUPLICATE_ACTION if (action != NO_ACTION) { \
+ fprintf(stderr, "duplicate action specified!\n"); \
+ exit(EXIT_FAILURE); }
+