21:32 < Cy8aer[m]> Glanzmann: Ok, brute force: Try: `DEBIAN_FRONTEND=gtk` - sic

[m1-debian] / doc / asahi.txt

diff --git a/doc/asahi.txt b/doc/asahi.txt
index 7427f577c362891198ffef41a98b38d681f558d9..24f9025787cd2d45e9ae997d5095c961a48d9d25 100644 (file)
--- a/doc/asahi.txt
+++ b/doc/asahi.txt
@@ -1,6 +1,6 @@
 # This is a developer quickstart guide for a tethered boot. If you're looking
 # for an enduser guide see: https://github.com/AsahiLinux/docs/wiki/Debian
 # This is a developer quickstart guide for a tethered boot. If you're looking
 # for an enduser guide see: https://github.com/AsahiLinux/docs/wiki/Debian

-# If you find errors or I should have elaborated more to get to going faster,
+# If you find errors or I should have elaborated more to get you going faster,

 # please let me know in IRC. My nick is Glanzmann or drop me an email at
 # thomas@glanzmann.de
 
 # please let me know in IRC. My nick is Glanzmann or drop me an email at
 # thomas@glanzmann.de
 


@@ -8,39 +8,45 @@
 
 # Extract the firmware and save it somewhere you have access to.
 # This firmware needs to be extracted later in /lib/firmware
 
 # Extract the firmware and save it somewhere you have access to.
 # This firmware needs to be extracted later in /lib/firmware

+

 curl -sL tg.st/u/fwx.sh | sh
 
 curl -sL tg.st/u/fwx.sh | sh
 

-# Make space the last number is the size that MacOS instatllation should consume
-diskutil apfs resizeContainer disk0s2 200GB
+# Make space. The last number is the size that MacOS instatllation should
+# consume. The minimum recommended is 100 GB to be able to apply updates later
+# on easily.
+
+diskutil apfs resizeContainer disk0s2 100GB
+
+# Run the installer, select MacOS 12.1 as stub OS version, in the boot picker
+# you're supposed to click Restart than return to the shell and wait until the
+# installer is finished and press Return to shutdown your system.

 
 

-# Run the installer, select as stub OS 12.1, in the boot picker you supposed to
-# click Restart than return to the shell and wait until the installer is
-# finished and press Return to shutdown your system.

 curl -L https://mrcn.st/alxsh | sh
 
 curl -L https://mrcn.st/alxsh | sh
 

-# Wait for the system to shutdown and the LEDs turn off. Than wait another 5
+# Wait for the system to shutdown and the LEDs turn off. Than wait another 10

 # seconds. Now press and do _not_ let go of the power button for 15 seconds.
 # seconds. Now press and do _not_ let go of the power button for 15 seconds.

+# If you screw up the power button holding, turn the System off by pressing the
+# power button until it is off and start from the beginning of this paragraph.

 # In the boot picker, select 'Options' and select Utilities > Terminal. In this
 # In the boot picker, select 'Options' and select Utilities > Terminal. In this

-# terminal execute. If you screw the power button holding, turn the System off by
-# pressing the power button until it is off and start from the beginning of this
-# paragraph.
+# terminal execute:

 
 /Volumes/Linux/step2.sh
 
 # Create an EFI parition because the final layout will have that
 
 /Volumes/Linux/step2.sh
 
 # Create an EFI parition because the final layout will have that

+

 diskutil list
 diskutil addPartition <identifier before free space> %EFI% LB 512MB
 
 # Create partition to hold a rootfs (minimum 1GB if you want to use the rootfs below)
 diskutil list
 diskutil addPartition <identifier before free space> %EFI% LB 512MB
 
 # Create partition to hold a rootfs (minimum 1GB if you want to use the rootfs below)

+

 diskutil list
 diskutil addPartition <identifier before free space> %Linux% %noformat% <size>
 
 diskutil list
 diskutil addPartition <identifier before free space> %Linux% %noformat% <size>
 

-# dd a Debian Testing rootfs on it (minimum size 1 GB)
+# dd a Debian Testing rootfs on it (minimum size 1GB)

 # Find the scripts to create that rootfs here: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/m1-debian
 # Find the scripts to create that rootfs here: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/m1-debian

-curl -L https://tg.st/u/m1.tgz | tar -xOz | dd of=/dev/<identifier of Linux Filesystem> bs=8m

 
 

-# Relax the boot policy for the stub os and uplaod install m1n1
-/Volumes/Linux/step2.sh
+diskutil list
+curl -L https://tg.st/u/m1.tgz | tar -xOz | dd of=/dev/<identifier of Linux Filesystem> bs=8m

 
 # Build dependencies
 sudo apt install -y gcc-aarch64-linux-gnu libc6-dev-arm64-cross device-tree-compiler imagemagick build-essential bc kmod flex cpio libncurses5-dev libelf-dev:native bison libssl-dev
 
 # Build dependencies
 sudo apt install -y gcc-aarch64-linux-gnu libc6-dev-arm64-cross device-tree-compiler imagemagick build-essential bc kmod flex cpio libncurses5-dev libelf-dev:native bison libssl-dev


@@ -50,7 +56,7 @@ git clone --depth 1 https://github.com/AsahiLinux/linux
 cd linux
 curl -s https://tg.st/u/9ce9060dea91951a330feeeda3ad636bc88c642c.patch | git am -
 curl -s https://tg.st/u/5nly | git am -
 cd linux
 curl -s https://tg.st/u/9ce9060dea91951a330feeeda3ad636bc88c642c.patch | git am -
 curl -s https://tg.st/u/5nly | git am -

-curl -s https://tg.st/u/m1-config-2022-01-27 > .config
+curl -s https://tg.st/u/config-2022-01-28 > .config

 make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- olddefconfig
 make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -j32 Image.gz dtbs
 cd ..
 make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- olddefconfig
 make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -j32 Image.gz dtbs
 cd ..


@@ -71,6 +77,3 @@ python3 ./proxyclient/experiments/pcie_enable_devices.py
 
 # Pick the dtb for your device: https://github.com/AsahiLinux/docs/wiki/Devices
 proxyclient/tools/linux.py --bootargs="net.ifnames=0 rw root=/dev/nvme0n1p5 rootwait rootfstype=ext4" ../linux/arch/arm64/boot/Image.gz ../linux/arch/arm64/boot/dts/apple/t8103-j293.dtb
 
 # Pick the dtb for your device: https://github.com/AsahiLinux/docs/wiki/Devices
 proxyclient/tools/linux.py --bootargs="net.ifnames=0 rw root=/dev/nvme0n1p5 rootwait rootfstype=ext4" ../linux/arch/arm64/boot/Image.gz ../linux/arch/arm64/boot/dts/apple/t8103-j293.dtb

-
-# Set timezone
-dpkg-reconfigure tzdata