Line in the wrong section spotted by Jostein Kjønigsen

[m1-debian] / doc / asahi.txt

diff --git a/doc/asahi.txt b/doc/asahi.txt
index 1c90c856a824c38c90878fc6938bffdf90e6a847..793b6ae04e18f1fd9842c8496ae86bc85acff1cf 100644 (file)
--- a/doc/asahi.txt
+++ b/doc/asahi.txt
@@ -1,64 +1,3 @@
-# Boot into macos
-
-# Extract the firmware and save it somewhere you have access to
-curl -sL tg.st/u/fwx.sh | sh
-
-# Make space the last number is the size that MacOS instatllation should consume
-diskutil apfs resizeContainer disk0s2 200GB
-
-# Run the installer, select as stub OS 12.1, in the boot picker you supposed to
-# click Restart than return to the shell and wait until the installer is
-# finished and press Return to shutdown your system.
-curl -L https://mrcn.st/alxsh | sh
-
-# 1. Press and hold down the power button to power on the system.
-#    * It is important that the system be fully powered off before this step,
-#      and that you press and hold down the button once, not multiple times.
-#      This is required to put the machine into the right mode.
-# 2. Release it once 'Entering startup options' is displayed.
-# 3. Choose Options.
-# 4. You will briefly see a 'macOS Recovery' dialog.
-#    * If you are asked to 'Select a volume to recover',
-#      then choose your normal macOS volume and click Next.
-# 5. Click on the Utilities menu and select Terminal.
-# 6. Type the following command and follow the prompts:
-
-# Create an EFI parition because the final layout will have that
-diskutil list
-diskutil addPartition <identifier before free space> %EFI% LB 512MB
-
-# Create partition to hold a rootfs (minimum 1GB if you want to use the rootfs below)
-diskutil list
-diskutil addPartition <identifier before free space> %Linux% %noformat% <size>
-
-# dd a Debian Testing rootfs on it (minimum size 1 GB)
-# Find the scripts to create that rootfs here: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/m1-debian
-curl -L https://tg.st/u/m1.tgz | tar -xOz | dd of=/dev/<identifier of Linux Filesystem>
-
-# Relax the boot policy for the stub os and uplaod install m1n1
-/Volumes/Linux/step2.sh
-
-# Build dependencies
-sudo apt install -y gcc-aarch64-linux-gnu libc6-dev-arm64-cross device-tree-compiler imagemagick build-essential bc kmod flex cpio libncurses5-dev libelf-dev:native bison libssl-dev
-
-# Compile the kernel
-git clone --depth 1 https://github.com/AsahiLinux/linux
-cd linux
-curl -s https://tg.st/u/9ce9060dea91951a330feeeda3ad636bc88c642c.patch | git am -
-curl -s https://tg.st/u/5nly | git am -
-curl -s https://tg.st/u/m1-config-2022-01-27 > .config
-
-# Crosscompile the kernel
-make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- olddefconfig
-make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -j32 Image.gz dtbs
-
-cd ..
-
-# build m1n1
-git clone --recursive https://github.com/AsahiLinux/m1n1.git
-cd m1n1
-make
-
 # Export the control device for the proxyclient and friends
 export M1N1DEVICE=/dev/ttyACM0
 
@@ -70,6 +9,3 @@ python3 ./proxyclient/experiments/pcie_enable_devices.py
 
 # Pick the dtb for your device: https://github.com/AsahiLinux/docs/wiki/Devices
 proxyclient/tools/linux.py --bootargs="net.ifnames=0 rw root=/dev/nvme0n1p5 rootwait rootfstype=ext4" ../linux/arch/arm64/boot/Image.gz ../linux/arch/arm64/boot/dts/apple/t8103-j293.dtb
-
-# Set timezone
-dpkg-reconfigure tzdata