New command

[m1-debian] / README.md

diff --git a/README.md b/README.md
index 44de2532b56e3096e6c3d8f33b9682225c068718..993825bd9705ecab92412b1f26df0f611c9bd745 100644 (file)
--- a/README.md
+++ b/README.md
@@ -106,7 +106,7 @@ Than open a terminal, and run the following commands:
 
 * If you have a EFI binary on the NVMe and want to boot from the usb stick, you need to interrupt u-boot on the countdown by pressing any key and run the following comamnd to boot from usb:
 
-        run bootcmd_usb0
+        env set boot_efi_bootmgr; run bootcmd_usb0
 
 * Reboot with the USB stick connected, the Debian livesystem should automatically start, if it doesn't load the kernel and initrd manually, you can use tab. For x try 0,1,2,...
 
@@ -120,7 +120,29 @@ Than open a terminal, and run the following commands:
 
 # FAQ
 
-* If I install Debian, will it be easy to update the Asahi work as it develops?
+## How to enable spakers?
+
+Currently speakers are only supported on M1 air. Install the necessary packages:
+
+        apt update
+        apt upgrade -y
+        apt dist-upgrade -y
+        apt install -y alsa-ucm-conf-asahi speakersafetyd
+        reboot
+
+After the reboot I need to restart the speakersafetyd in order to hear sound out of the speakers:
+
+        sudo systemctl restart speakersafetyd
+
+## Does it work on M2?
+
+Yes, M3 is not yet supported.
+
+## Are you still maintaining this?
+
+Yes, I do and will continue doing this until there is an official Debian installer.
+
+## If I install Debian, will it be easy to update the Asahi work as it develops?
 
 Yes, long answer below.
 
@@ -132,7 +154,7 @@ as root:
 
 For installations before 2022-12-12, see <https://thomas.glanzmann.de/asahi/README.txt>
 
-Later it might be necessary to upgrade the stub parition in order to
+Later it might be necessary to upgrade the stub partion in order to
 support the GPU code. As soon as that happens, I'll add the
 instructions and a video in order to do so, but short version is:
 
@@ -144,7 +166,7 @@ instructions and a video in order to do so, but short version is:
 So, you never need to reinstall Debian. Kernel updates are easy, stub
 updates are a little bit more cumbersome but also seldom.
 
-* How do I compile zfs on apple silicon debian?
+## How do I compile zfs on apple silicon debian?
 
 - In order to build zfs you need the rust environment. So from the m1-debian
   repository you have to run these scripts:
@@ -152,12 +174,6 @@ updates are a little bit more cumbersome but also seldom.
         ./dependencies.sh
         ./prepare_rust.sh
 
-- Build a kernel that is not cross compiled. Because the cross compiled header
-  package does contain the fixtool for the wrong architecture at the moment and
-  install the resulting kernel deb and headers and boot into it:
-
-        ./m1n1_uboot_kernel.sh
-
 - Prepare your zfs build environment. You need to replace
   /home/sithglan/work/m1-debian with your path to
   your m1-debian checkout:
@@ -166,10 +182,6 @@ updates are a little bit more cumbersome but also seldom.
         export RUSTUP_HOME="/home/sithglan/work/m1-debian/build/rust"
         source "/home/sithglan/work/m1-debian/build/cargo/env"
 
-- You have to specify the default rust version:
-
-        rustup default 1.68.2
-
 - Tell zfs which version of clang you use to compile the kernel:
 
         export KERNEL_LLVM=-15