Line in the wrong section spotted by Jostein Kjønigsen

[m1-debian] / README.md

diff --git a/README.md b/README.md
index 46e84914080e3b1531ed25d158eb64e8c24c23bb..ee536866a115080f6a109bce9e20c53a74314923 100644 (file)
--- a/README.md
+++ b/README.md
@@ -106,7 +106,7 @@ Than open a terminal, and run the following commands:
 
 * If you have a EFI binary on the NVMe and want to boot from the usb stick, you need to interrupt u-boot on the countdown by pressing any key and run the following comamnd to boot from usb:
 
 
 * If you have a EFI binary on the NVMe and want to boot from the usb stick, you need to interrupt u-boot on the countdown by pressing any key and run the following comamnd to boot from usb:
 

-        run bootcmd_usb0
+        env set boot_efi_bootmgr; run bootcmd_usb0

 
 * Reboot with the USB stick connected, the Debian livesystem should automatically start, if it doesn't load the kernel and initrd manually, you can use tab. For x try 0,1,2,...
 
 
 * Reboot with the USB stick connected, the Debian livesystem should automatically start, if it doesn't load the kernel and initrd manually, you can use tab. For x try 0,1,2,...
 


@@ -120,6 +120,37 @@ Than open a terminal, and run the following commands:
 
 # FAQ
 
 
 # FAQ
 

+## Why has there been no kernel update?
+
+For Debian stable I'm currently unable to update the kernel due to the fact
+that the kernel requires new mesa packages and the new mesa package needs too
+many dependencies which are not in Debian stable and I'm not willing to add
+that many new packages. So I recommend that if you want the latest asahi
+kernel, mesa, sound and other packages, switch to testing and use Thomas
+Renards packages for testing. <https://wiki.debian.org/Teams/Bananas>
+
+## How to enable spakers?
+
+Currently speakers are only supported on M1 air. Install the necessary packages:
+
+        apt update
+        apt upgrade -y
+        apt dist-upgrade -y
+        apt install -y alsa-ucm-conf-asahi speakersafetyd
+        reboot
+
+After the reboot I need to restart the speakersafetyd in order to hear sound out of the speakers:
+
+        sudo systemctl restart speakersafetyd
+
+## Does it work on M2?
+
+Yes, M3 is not yet supported.
+
+## Are you still maintaining this?
+
+Yes, I do and will continue doing this until there is an official Debian installer.
+

 ## If I install Debian, will it be easy to update the Asahi work as it develops?
 
 Yes, long answer below.
 ## If I install Debian, will it be easy to update the Asahi work as it develops?
 
 Yes, long answer below.


@@ -132,7 +163,7 @@ as root:
 
 For installations before 2022-12-12, see <https://thomas.glanzmann.de/asahi/README.txt>
 
 
 For installations before 2022-12-12, see <https://thomas.glanzmann.de/asahi/README.txt>
 

-Later it might be necessary to upgrade the stub parition in order to
+Later it might be necessary to upgrade the stub partion in order to

 support the GPU code. As soon as that happens, I'll add the
 instructions and a video in order to do so, but short version is:
 
 support the GPU code. As soon as that happens, I'll add the
 instructions and a video in order to do so, but short version is:
 


@@ -160,10 +191,6 @@ updates are a little bit more cumbersome but also seldom.
         export RUSTUP_HOME="/home/sithglan/work/m1-debian/build/rust"
         source "/home/sithglan/work/m1-debian/build/cargo/env"
 
         export RUSTUP_HOME="/home/sithglan/work/m1-debian/build/rust"
         source "/home/sithglan/work/m1-debian/build/cargo/env"
 

-- You have to specify the default rust version:
-
-        rustup default 1.68.2
-

 - Tell zfs which version of clang you use to compile the kernel:
 
         export KERNEL_LLVM=-15
 - Tell zfs which version of clang you use to compile the kernel:
 
         export KERNEL_LLVM=-15


@@ -197,3 +224,8 @@ updates are a little bit more cumbersome but also seldom.
         make -s -j$(nproc)
 
 - Follow the instructions on <https://openzfs.github.io/openzfs-docs/Developer%20Resources/Building%20ZFS.html> how to install it.
         make -s -j$(nproc)
 
 - Follow the instructions on <https://openzfs.github.io/openzfs-docs/Developer%20Resources/Building%20ZFS.html> how to install it.

+
+## What about gnome?
+
+You need an unpriviledged user to log in. You should delete /etc/network/interfaces in order to manage the network under gnome. If you don't have an US keyboard, you can change the settings in Gnome > Settings > Keyboard.
+