Merge branch 'master' of 88.198.237.222:/git/m1-debian

[m1-debian] / doc / asahi.txt

diff --git a/doc/asahi.txt b/doc/asahi.txt
index 26eebfc9a3cce72786d11e660be953078381ccd2..e4d028f875b23cf0c2aa0e70c45a7292716803d6 100644 (file)
--- a/doc/asahi.txt
+++ b/doc/asahi.txt
@@ -1,6 +1,6 @@
 # This is a developer quickstart guide for a tethered boot. If you're looking
 # for an enduser guide see: https://github.com/AsahiLinux/docs/wiki/Debian
 # This is a developer quickstart guide for a tethered boot. If you're looking
 # for an enduser guide see: https://github.com/AsahiLinux/docs/wiki/Debian

-# If you find errors or I should have elaborated more to get to going faster,
+# If you find errors or I should have elaborated more to get you going faster,

 # please let me know in IRC. My nick is Glanzmann or drop me an email at
 # thomas@glanzmann.de
 
 # please let me know in IRC. My nick is Glanzmann or drop me an email at
 # thomas@glanzmann.de
 


@@ -8,57 +8,56 @@
 
 # Extract the firmware and save it somewhere you have access to.
 # This firmware needs to be extracted later in /lib/firmware
 
 # Extract the firmware and save it somewhere you have access to.
 # This firmware needs to be extracted later in /lib/firmware

+

 curl -sL tg.st/u/fwx.sh | sh
 
 curl -sL tg.st/u/fwx.sh | sh
 

-# Make space the last number is the size that MacOS instatllation should consume
+# Make space the last number is the size that MacOS instatllation should
+# consume. The minimum recommended is 100 GB to be able to apply updates later
+# on easily.
+

 diskutil apfs resizeContainer disk0s2 200GB
 
 diskutil apfs resizeContainer disk0s2 200GB
 

-# Run the installer, select as stub OS 12.1, in the boot picker you supposed to
-# click Restart than return to the shell and wait until the installer is
+# Run the installer, select as stub OS 12.1, in the boot picker you're supposed
+# to click Restart than return to the shell and wait until the installer is

 # finished and press Return to shutdown your system.
 # finished and press Return to shutdown your system.

+

 curl -L https://mrcn.st/alxsh | sh
 
 curl -L https://mrcn.st/alxsh | sh
 

-# 1. Press and hold down the power button to power on the system.
-#    * It is important that the system be fully powered off before this step,
-#      and that you press and hold down the button once, not multiple times.
-#      This is required to put the machine into the right mode.
-# 2. Release it once 'Entering startup options' is displayed.
-# 3. Choose Options.
-# 4. You will briefly see a 'macOS Recovery' dialog.
-#    * If you are asked to 'Select a volume to recover',
-#      then choose your normal macOS volume and click Next.
-# 5. Click on the Utilities menu and select Terminal.
-# 6. Type the following command and follow the prompts:
+# Wait for the system to shutdown and the LEDs turn off. Than wait another 5
+# seconds. Now press and do _not_ let go of the power button for 15 seconds.
+# If you screw up the power button holding, turn the System off by pressing the
+# power button until it is off and start from the beginning of this paragraph.
+# In the boot picker, select 'Options' and select Utilities > Terminal. In this
+# terminal execute:
+
+/Volumes/Linux/step2.sh

 
 # Create an EFI parition because the final layout will have that
 
 # Create an EFI parition because the final layout will have that

+

 diskutil list
 diskutil addPartition <identifier before free space> %EFI% LB 512MB
 
 # Create partition to hold a rootfs (minimum 1GB if you want to use the rootfs below)
 diskutil list
 diskutil addPartition <identifier before free space> %EFI% LB 512MB
 
 # Create partition to hold a rootfs (minimum 1GB if you want to use the rootfs below)

+

 diskutil list
 diskutil addPartition <identifier before free space> %Linux% %noformat% <size>
 
 # dd a Debian Testing rootfs on it (minimum size 1 GB)
 # Find the scripts to create that rootfs here: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/m1-debian
 diskutil list
 diskutil addPartition <identifier before free space> %Linux% %noformat% <size>
 
 # dd a Debian Testing rootfs on it (minimum size 1 GB)
 # Find the scripts to create that rootfs here: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/m1-debian

-curl -L https://tg.st/u/m1.tgz | tar -xOz | dd of=/dev/<identifier of Linux Filesystem>

 
 

-# Relax the boot policy for the stub os and uplaod install m1n1
-/Volumes/Linux/step2.sh
+curl -L https://tg.st/u/m1.tgz | tar -xOz | dd of=/dev/<identifier of Linux Filesystem> bs=8m

 
 # Build dependencies
 sudo apt install -y gcc-aarch64-linux-gnu libc6-dev-arm64-cross device-tree-compiler imagemagick build-essential bc kmod flex cpio libncurses5-dev libelf-dev:native bison libssl-dev
 
 
 # Build dependencies
 sudo apt install -y gcc-aarch64-linux-gnu libc6-dev-arm64-cross device-tree-compiler imagemagick build-essential bc kmod flex cpio libncurses5-dev libelf-dev:native bison libssl-dev
 

-# Compile the kernel
+# Crosscompile the kernel

 git clone --depth 1 https://github.com/AsahiLinux/linux
 cd linux
 curl -s https://tg.st/u/9ce9060dea91951a330feeeda3ad636bc88c642c.patch | git am -
 curl -s https://tg.st/u/5nly | git am -
 git clone --depth 1 https://github.com/AsahiLinux/linux
 cd linux
 curl -s https://tg.st/u/9ce9060dea91951a330feeeda3ad636bc88c642c.patch | git am -
 curl -s https://tg.st/u/5nly | git am -

-curl -s https://tg.st/u/m1-config-2022-01-27 > .config
-
-# Crosscompile the kernel
+curl -s https://tg.st/u/config-2022-01-28 > .config

 make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- olddefconfig
 make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -j32 Image.gz dtbs
 make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- olddefconfig
 make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -j32 Image.gz dtbs

-

 cd ..
 
 # build m1n1
 cd ..
 
 # build m1n1