remove executable bit from sounds

[micropolis] / src / tcl / tclvar.c

/* 
 * tclVar.c --
 *
 *      This file contains routines that implement Tcl variables
 *      (both scalars and arrays).
 *
 *      The implementation of arrays is modelled after an initial
 *      implementation by Karl Lehenbauer, Mark Diekhans and
 *      Peter da Silva.
 *
 * Copyright 1987-1991 Regents of the University of California
 * Permission to use, copy, modify, and distribute this
 * software and its documentation for any purpose and without
 * fee is hereby granted, provided that the above copyright
 * notice appear in all copies.  The University of California
 * makes no representations about the suitability of this
 * software for any purpose.  It is provided "as is" without
 * express or implied warranty.
 */

#ifndef lint
static char rcsid[] = "$Header: /user6/ouster/tcl/RCS/tclVar.c,v 1.27 92/05/07 09:24:59 ouster Exp $ SPRITE (Berkeley)";
#endif

#include "tclint.h"

/*
 * The strings below are used to indicate what went wrong when a
 * variable access is denied.
 */

static char *noSuchVar =        "no such variable";
static char *isArray =          "variable is array";
static char *needArray =        "variable isn't array";
static char *noSuchElement =    "no such element in array";
static char *traceActive =      "trace is active on variable";

/*
 * Forward references to procedures defined later in this file:
 */

static  char *          CallTraces _ANSI_ARGS_((Interp *iPtr, Var *arrayPtr,
                            Tcl_HashEntry *hPtr, char *name1, char *name2,
                            int flags));
static void             DeleteSearches _ANSI_ARGS_((Var *arrayVarPtr));
static void             DeleteArray _ANSI_ARGS_((Interp *iPtr, char *arrayName,
                            Var *varPtr, int flags));
static Var *            NewVar _ANSI_ARGS_((int space));
static ArraySearch *    ParseSearchId _ANSI_ARGS_((Tcl_Interp *interp,
                            Var *varPtr, char *varName, char *string));
static void             VarErrMsg _ANSI_ARGS_((Tcl_Interp *interp,
                            char *name1, char *name2, char *operation,
                            char *reason));
\f
/*
 *----------------------------------------------------------------------
 *
 * Tcl_GetVar --
 *
 *      Return the value of a Tcl variable.
 *
 * Results:
 *      The return value points to the current value of varName.  If
 *      the variable is not defined or can't be read because of a clash
 *      in array usage then a NULL pointer is returned and an error
 *      message is left in interp->result if the TCL_LEAVE_ERR_MSG
 *      flag is set.  Note:  the return value is only valid up until
 *      the next call to Tcl_SetVar or Tcl_SetVar2;  if you depend on
 *      the value lasting longer than that, then make yourself a private
 *      copy.
 *
 * Side effects:
 *      None.
 *
 *----------------------------------------------------------------------
 */

char *
Tcl_GetVar(interp, varName, flags)
    Tcl_Interp *interp;         /* Command interpreter in which varName is
                                 * to be looked up. */
    char *varName;              /* Name of a variable in interp. */
    int flags;                  /* OR-ed combination of TCL_GLOBAL_ONLY
                                 * or TCL_LEAVE_ERR_MSG bits. */
{
    register char *p;

    /*
     * If varName refers to an array (it ends with a parenthesized
     * element name), then handle it specially.
     */

    for (p = varName; *p != '\0'; p++) {
        if (*p == '(') {
            char *result;
            char *open = p;

            do {
                p++;
            } while (*p != '\0');
            p--;
            if (*p != ')') {
                goto scalar;
            }
            *open = '\0';
            *p = '\0';
            result = Tcl_GetVar2(interp, varName, open + 1, flags);
            *open = '(';
            *p = ')';
#ifdef sgi
            strcmp("a", "b"); /* XXX SGI compiler optimizer bug */
#endif
            return result;
        }
    }

    scalar:
    return Tcl_GetVar2(interp, varName, (char *) NULL, flags);
}
\f
/*
 *----------------------------------------------------------------------
 *
 * Tcl_GetVar2 --
 *
 *      Return the value of a Tcl variable, given a two-part name
 *      consisting of array name and element within array.
 *
 * Results:
 *      The return value points to the current value of the variable
 *      given by name1 and name2.  If the specified variable doesn't
 *      exist, or if there is a clash in array usage, then NULL is
 *      returned and a message will be left in interp->result if the
 *      TCL_LEAVE_ERR_MSG flag is set.  Note:  the return value is
 *      only valid up until the next call to Tcl_SetVar or Tcl_SetVar2;
 *      if you depend on the value lasting longer than that, then make
 *      yourself a private copy.
 *
 * Side effects:
 *      None.
 *
 *----------------------------------------------------------------------
 */

char *
Tcl_GetVar2(interp, name1, name2, flags)
    Tcl_Interp *interp;         /* Command interpreter in which variable is
                                 * to be looked up. */
    char *name1;                /* Name of array (if name2 is NULL) or
                                 * name of variable. */
    char *name2;                /* If non-null, gives name of element in
                                 * array. */
    int flags;                  /* OR-ed combination of TCL_GLOBAL_ONLY
                                 * or TCL_LEAVE_ERR_MSG bits. */
{
    Tcl_HashEntry *hPtr;
    Var *varPtr;
    Interp *iPtr = (Interp *) interp;
    Var *arrayPtr = NULL;

    /*
     * Lookup the first name.
     */

    if ((flags & TCL_GLOBAL_ONLY) || (iPtr->varFramePtr == NULL)) {
        hPtr = Tcl_FindHashEntry(&iPtr->globalTable, name1);
    } else {
        hPtr = Tcl_FindHashEntry(&iPtr->varFramePtr->varTable, name1);
    }
    if (hPtr == NULL) {
        if (flags & TCL_LEAVE_ERR_MSG) {
            VarErrMsg(interp, name1, name2, "read", noSuchVar);
        }
        return NULL;
    }
    varPtr = (Var *) Tcl_GetHashValue(hPtr);
    if (varPtr->flags & VAR_UPVAR) {
        hPtr = varPtr->value.upvarPtr;
        varPtr = (Var *) Tcl_GetHashValue(hPtr);
    }

    /*
     * If this is an array reference, then remember the traces on the array
     * and lookup the element within the array.
     */

    if (name2 != NULL) {
        if (varPtr->flags & VAR_UNDEFINED) {
            if (flags & TCL_LEAVE_ERR_MSG) {
                VarErrMsg(interp, name1, name2, "read", noSuchVar);
            }
            return NULL;
        } else if (!(varPtr->flags & VAR_ARRAY)) {
            if (flags & TCL_LEAVE_ERR_MSG) {
                VarErrMsg(interp, name1, name2, "read", needArray);
            }
            return NULL;
        }
        arrayPtr = varPtr;
        hPtr = Tcl_FindHashEntry(varPtr->value.tablePtr, name2);
        if (hPtr == NULL) {
            if (flags & TCL_LEAVE_ERR_MSG) {
                VarErrMsg(interp, name1, name2, "read", noSuchElement);
            }
            return NULL;
        }
        varPtr = (Var *) Tcl_GetHashValue(hPtr);
    }

    /*
     * Invoke any traces that have been set for the variable.
     */

    if ((varPtr->tracePtr != NULL)
            || ((arrayPtr != NULL) && (arrayPtr->tracePtr != NULL))) {
        char *msg;

        msg = CallTraces(iPtr, arrayPtr, hPtr, name1, name2,
                (flags & TCL_GLOBAL_ONLY) | TCL_TRACE_READS);
        if (msg != NULL) {
            VarErrMsg(interp, name1, name2, "read", msg);
            return NULL;
        }

        /*
         * Watch out!  The variable could have gotten re-allocated to
         * a larger size.  Fortunately the hash table entry will still
         * be around.
         */

        varPtr = (Var *) Tcl_GetHashValue(hPtr);
    }
    if (varPtr->flags & (VAR_UNDEFINED|VAR_UPVAR|VAR_ARRAY)) {
        if (flags & TCL_LEAVE_ERR_MSG) {
            VarErrMsg(interp, name1, name2, "read", noSuchVar);
        }
        return NULL;
    }
    return varPtr->value.string;
}
\f
/*
 *----------------------------------------------------------------------
 *
 * Tcl_SetVar --
 *
 *      Change the value of a variable.
 *
 * Results:
 *      Returns a pointer to the malloc'ed string holding the new
 *      value of the variable.  The caller should not modify this
 *      string.  If the write operation was disallowed then NULL
 *      is returned;  if the TCL_LEAVE_ERR_MSG flag is set, then
 *      an explanatory message will be left in interp->result.
 *
 * Side effects:
 *      If varName is defined as a local or global variable in interp,
 *      its value is changed to newValue.  If varName isn't currently
 *      defined, then a new global variable by that name is created.
 *
 *----------------------------------------------------------------------
 */

char *
Tcl_SetVar(interp, varName, newValue, flags)
    Tcl_Interp *interp;         /* Command interpreter in which varName is
                                 * to be looked up. */
    char *varName;              /* Name of a variable in interp. */
    char *newValue;             /* New value for varName. */
    int flags;                  /* Various flags that tell how to set value:
                                 * any of TCL_GLOBAL_ONLY, TCL_APPEND_VALUE,
                                 * TCL_LIST_ELEMENT, TCL_NO_SPACE, or
                                 * TCL_LEAVE_ERR_MSG. */
{
    register char *p;

    /*
     * If varName refers to an array (it ends with a parenthesized
     * element name), then handle it specially.
     */

    for (p = varName; *p != '\0'; p++) {
        if (*p == '(') {
            char *result;
            char *open = p;

            do {
                p++;
            } while (*p != '\0');
            p--;
            if (*p != ')') {
                goto scalar;
            }
            *open = '\0';
            *p = '\0';
            result = Tcl_SetVar2(interp, varName, open+1, newValue, flags);
            *open = '(';
            *p = ')';
            return result;
        }
    }

    scalar:
    return Tcl_SetVar2(interp, varName, (char *) NULL, newValue, flags);
}
\f
/*
 *----------------------------------------------------------------------
 *
 * Tcl_SetVar2 --
 *
 *      Given a two-part variable name, which may refer either to a
 *      scalar variable or an element of an array, change the value
 *      of the variable.  If the named scalar or array or element
 *      doesn't exist then create one.
 *
 * Results:
 *      Returns a pointer to the malloc'ed string holding the new
 *      value of the variable.  The caller should not modify this
 *      string.  If the write operation was disallowed because an
 *      array was expected but not found (or vice versa), then NULL
 *      is returned;  if the TCL_LEAVE_ERR_MSG flag is set, then
 *      an explanatory message will be left in interp->result.
 *
 * Side effects:
 *      The value of the given variable is set.  If either the array
 *      or the entry didn't exist then a new one is created.
 *
 *----------------------------------------------------------------------
 */

char *
Tcl_SetVar2(interp, name1, name2, newValue, flags)
    Tcl_Interp *interp;         /* Command interpreter in which variable is
                                 * to be looked up. */
    char *name1;                /* If name2 is NULL, this is name of scalar
                                 * variable.  Otherwise it is name of array. */
    char *name2;                /* Name of an element within array, or NULL. */
    char *newValue;             /* New value for variable. */
    int flags;                  /* Various flags that tell how to set value:
                                 * any of TCL_GLOBAL_ONLY, TCL_APPEND_VALUE,
                                 * TCL_LIST_ELEMENT, and TCL_NO_SPACE, or
                                 * TCL_LEAVE_ERR_MSG . */
{
    Tcl_HashEntry *hPtr;
    register Var *varPtr = NULL;
                                /* Initial value only used to stop compiler
                                 * from complaining; not really needed. */
    register Interp *iPtr = (Interp *) interp;
    int length, new, listFlags;
    Var *arrayPtr = NULL;

    /*
     * Lookup the first name.
     */

    if ((flags & TCL_GLOBAL_ONLY) || (iPtr->varFramePtr == NULL)) {
        hPtr = Tcl_CreateHashEntry(&iPtr->globalTable, name1, &new);
    } else {
        hPtr = Tcl_CreateHashEntry(&iPtr->varFramePtr->varTable,
                name1, &new);
    }
    if (!new) {
        varPtr = (Var *) Tcl_GetHashValue(hPtr);
        if (varPtr->flags & VAR_UPVAR) {
            hPtr = varPtr->value.upvarPtr;
            varPtr = (Var *) Tcl_GetHashValue(hPtr);
        }
    }

    /*
     * If this is an array reference, then create a new array (if
     * needed), remember any traces on the array, and lookup the
     * element within the array.
     */

    if (name2 != NULL) {
        if (new) {
            varPtr = NewVar(0);
            Tcl_SetHashValue(hPtr, varPtr);
            varPtr->flags = VAR_ARRAY;
            varPtr->value.tablePtr = (Tcl_HashTable *)
                    ckalloc(sizeof(Tcl_HashTable));
            Tcl_InitHashTable(varPtr->value.tablePtr, TCL_STRING_KEYS);
        } else {
            if (varPtr->flags & VAR_UNDEFINED) {
                varPtr->flags = VAR_ARRAY;
                varPtr->value.tablePtr = (Tcl_HashTable *)
                        ckalloc(sizeof(Tcl_HashTable));
                Tcl_InitHashTable(varPtr->value.tablePtr, TCL_STRING_KEYS);
            } else if (!(varPtr->flags & VAR_ARRAY)) {
                if (flags & TCL_LEAVE_ERR_MSG) {
                    VarErrMsg(interp, name1, name2, "set", needArray);
                }
                return NULL;
            }
            arrayPtr = varPtr;
        }
        hPtr = Tcl_CreateHashEntry(varPtr->value.tablePtr, name2, &new);
    }

    /*
     * Compute how many bytes will be needed for newValue (leave space
     * for a separating space between list elements).
     */

    if (flags & TCL_LIST_ELEMENT) {
        length = Tcl_ScanElement(newValue, &listFlags) + 1;
    } else {
        length = strlen(newValue);
    }

    /*
     * If the variable doesn't exist then create a new one.  If it
     * does exist then clear its current value unless this is an
     * append operation.
     */

    if (new) {
        varPtr = NewVar(length);
        Tcl_SetHashValue(hPtr, varPtr);
        if ((arrayPtr != NULL) && (arrayPtr->searchPtr != NULL)) {
            DeleteSearches(arrayPtr);
        }
    } else {
        varPtr = (Var *) Tcl_GetHashValue(hPtr);
        if (varPtr->flags & VAR_ARRAY) {
            if (flags & TCL_LEAVE_ERR_MSG) {
                VarErrMsg(interp, name1, name2, "set", isArray);
            }
            return NULL;
        }
        if (!(flags & TCL_APPEND_VALUE) || (varPtr->flags & VAR_UNDEFINED)) {
            varPtr->valueLength = 0;
        }
    }

    /*
     * Make sure there's enough space to hold the variable's
     * new value.  If not, enlarge the variable's space.
     */

    if ((length + varPtr->valueLength) >= varPtr->valueSpace) {
        Var *newVarPtr;
        int newSize;

        newSize = 2*varPtr->valueSpace;
        if (newSize <= (length + varPtr->valueLength)) {
            newSize += length;
        }
        newVarPtr = NewVar(newSize);
        newVarPtr->valueLength = varPtr->valueLength;
        newVarPtr->upvarUses = varPtr->upvarUses;
        newVarPtr->tracePtr = varPtr->tracePtr;
        strcpy(newVarPtr->value.string, varPtr->value.string);
        Tcl_SetHashValue(hPtr, newVarPtr);
        ckfree((char *) varPtr);
        varPtr = newVarPtr;
    }

    /*
     * Append the new value to the variable, either as a list
     * element or as a string.
     */

    if (flags & TCL_LIST_ELEMENT) {
        if ((varPtr->valueLength > 0) && !(flags & TCL_NO_SPACE)) {
            varPtr->value.string[varPtr->valueLength] = ' ';
            varPtr->valueLength++;
        }
        varPtr->valueLength += Tcl_ConvertElement(newValue,
                varPtr->value.string + varPtr->valueLength, listFlags);
        varPtr->value.string[varPtr->valueLength] = 0;
    } else {
        strcpy(varPtr->value.string + varPtr->valueLength, newValue);
        varPtr->valueLength += length;
    }
    varPtr->flags &= ~VAR_UNDEFINED;

    /*
     * Invoke any write traces for the variable.
     */

    if ((varPtr->tracePtr != NULL)
            || ((arrayPtr != NULL) && (arrayPtr->tracePtr != NULL))) {
        char *msg;

        msg = CallTraces(iPtr, arrayPtr, hPtr, name1, name2,
                (flags & TCL_GLOBAL_ONLY) | TCL_TRACE_WRITES);
        if (msg != NULL) {
            VarErrMsg(interp, name1, name2, "set", msg);
            return NULL;
        }

        /*
         * Watch out!  The variable could have gotten re-allocated to
         * a larger size.  Fortunately the hash table entry will still
         * be around.
         */

        varPtr = (Var *) Tcl_GetHashValue(hPtr);
    }
    return varPtr->value.string;
}
\f
/*
 *----------------------------------------------------------------------
 *
 * Tcl_UnsetVar --
 *
 *      Delete a variable, so that it may not be accessed anymore.
 *
 * Results:
 *      Returns 0 if the variable was successfully deleted, -1
 *      if the variable can't be unset.  In the event of an error,
 *      if the TCL_LEAVE_ERR_MSG flag is set then an error message
 *      is left in interp->result.
 *
 * Side effects:
 *      If varName is defined as a local or global variable in interp,
 *      it is deleted.
 *
 *----------------------------------------------------------------------
 */

int
Tcl_UnsetVar(interp, varName, flags)
    Tcl_Interp *interp;         /* Command interpreter in which varName is
                                 * to be looked up. */
    char *varName;              /* Name of a variable in interp.  May be
                                 * either a scalar name or an array name
                                 * or an element in an array. */
    int flags;                  /* OR-ed combination of any of
                                 * TCL_GLOBAL_ONLY or TCL_LEAVE_ERR_MSG. */
{
    register char *p;
    int result;

    /*
     * Figure out whether this is an array reference, then call
     * Tcl_UnsetVar2 to do all the real work.
     */

    for (p = varName; *p != '\0'; p++) {
        if (*p == '(') {
            char *open = p;

            do {
                p++;
            } while (*p != '\0');
            p--;
            if (*p != ')') {
                goto scalar;
            }
            *open = '\0';
            *p = '\0';
            result = Tcl_UnsetVar2(interp, varName, open+1, flags);
            *open = '(';
            *p = ')';
            return result;
        }
    }

    scalar:
    return Tcl_UnsetVar2(interp, varName, (char *) NULL, flags);
}
\f
/*
 *----------------------------------------------------------------------
 *
 * Tcl_UnsetVar2 --
 *
 *      Delete a variable, given a 2-part name.
 *
 * Results:
 *      Returns 0 if the variable was successfully deleted, -1
 *      if the variable can't be unset.  In the event of an error,
 *      if the TCL_LEAVE_ERR_MSG flag is set then an error message
 *      is left in interp->result.
 *
 * Side effects:
 *      If name1 and name2 indicate a local or global variable in interp,
 *      it is deleted.  If name1 is an array name and name2 is NULL, then
 *      the whole array is deleted.
 *
 *----------------------------------------------------------------------
 */

int
Tcl_UnsetVar2(interp, name1, name2, flags)
    Tcl_Interp *interp;         /* Command interpreter in which varName is
                                 * to be looked up. */
    char *name1;                /* Name of variable or array. */
    char *name2;                /* Name of element within array or NULL. */
    int flags;                  /* OR-ed combination of any of
                                 * TCL_GLOBAL_ONLY or TCL_LEAVE_ERR_MSG. */
{
    Tcl_HashEntry *hPtr, dummyEntry;
    Var *varPtr, dummyVar;
    Interp *iPtr = (Interp *) interp;
    Var *arrayPtr = NULL;

    if ((flags & TCL_GLOBAL_ONLY) || (iPtr->varFramePtr == NULL)) {
        hPtr = Tcl_FindHashEntry(&iPtr->globalTable, name1);
    } else {
        hPtr = Tcl_FindHashEntry(&iPtr->varFramePtr->varTable, name1);
    }
    if (hPtr == NULL) {
        if (flags & TCL_LEAVE_ERR_MSG) {
            VarErrMsg(interp, name1, name2, "unset", noSuchVar);
        }
        return -1;
    }
    varPtr = (Var *) Tcl_GetHashValue(hPtr);

    /*
     * For global variables referenced in procedures, leave the procedure's
     * reference variable in place, but unset the global variable.  Can't
     * decrement the actual variable's use count, since we didn't delete
     * the reference variable.
     */

    if (varPtr->flags & VAR_UPVAR) {
        hPtr = varPtr->value.upvarPtr;
        varPtr = (Var *) Tcl_GetHashValue(hPtr);
    }

    /*
     * If the variable being deleted is an element of an array, then
     * remember trace procedures on the overall array and find the
     * element to delete.
     */

    if (name2 != NULL) {
        if (!(varPtr->flags & VAR_ARRAY)) {
            if (flags & TCL_LEAVE_ERR_MSG) {
                VarErrMsg(interp, name1, name2, "unset", needArray);
            }
            return -1;
        }
        if (varPtr->searchPtr != NULL) {
            DeleteSearches(varPtr);
        }
        arrayPtr = varPtr;
        hPtr = Tcl_FindHashEntry(varPtr->value.tablePtr, name2);
        if (hPtr == NULL) {
            if (flags & TCL_LEAVE_ERR_MSG) {
                VarErrMsg(interp, name1, name2, "unset", noSuchElement);
            }
            return -1;
        }
        varPtr = (Var *) Tcl_GetHashValue(hPtr);
    }

    /*
     * If there is a trace active on this variable or if the variable
     * is already being deleted then don't delete the variable:  it
     * isn't safe, since there are procedures higher up on the stack
     * that will use pointers to the variable.  Also don't delete an
     * array if there are traces active on any of its elements.
     */

    if (varPtr->flags &
            (VAR_TRACE_ACTIVE|VAR_ELEMENT_ACTIVE)) {
        if (flags & TCL_LEAVE_ERR_MSG) {
            VarErrMsg(interp, name1, name2, "unset", traceActive);
        }
        return -1;
    }

    /*
     * The code below is tricky, because of the possibility that
     * a trace procedure might try to access a variable being
     * deleted.  To handle this situation gracefully, copy the
     * contents of the variable and its hash table entry to
     * dummy variables, then clean up the actual variable so that
     * it's been completely deleted before the traces are called.
     * Then call the traces, and finally clean up the variable's
     * storage using the dummy copies.
     */

    dummyVar = *varPtr;
    Tcl_SetHashValue(&dummyEntry, &dummyVar);
    if (varPtr->upvarUses == 0) {
        Tcl_DeleteHashEntry(hPtr);
        ckfree((char *) varPtr);
    } else {
        varPtr->flags = VAR_UNDEFINED;
        varPtr->tracePtr = NULL;
    }

    /*
     * Call trace procedures for the variable being deleted and delete
     * its traces.
     */

    if ((dummyVar.tracePtr != NULL)
            || ((arrayPtr != NULL) && (arrayPtr->tracePtr != NULL))) {
        (void) CallTraces(iPtr, arrayPtr, &dummyEntry, name1, name2,
                (flags & TCL_GLOBAL_ONLY) | TCL_TRACE_UNSETS);
        while (dummyVar.tracePtr != NULL) {
            VarTrace *tracePtr = dummyVar.tracePtr;
            dummyVar.tracePtr = tracePtr->nextPtr;
            ckfree((char *) tracePtr);
        }
    }

    /*
     * If the variable is an array, delete all of its elements.  This
     * must be done after calling the traces on the array, above (that's
     * the way traces are defined).
     */

    if (dummyVar.flags & VAR_ARRAY) {
        DeleteArray(iPtr, name1, &dummyVar,
            (flags & TCL_GLOBAL_ONLY) | TCL_TRACE_UNSETS);
    }
    if (dummyVar.flags & VAR_UNDEFINED) {
        if (flags & TCL_LEAVE_ERR_MSG) {
            VarErrMsg(interp, name1, name2, "unset", 
                    (name2 == NULL) ? noSuchVar : noSuchElement);
        }
        return -1;
    }
    return 0;
}
\f
/*
 *----------------------------------------------------------------------
 *
 * Tcl_TraceVar --
 *
 *      Arrange for reads and/or writes to a variable to cause a
 *      procedure to be invoked, which can monitor the operations
 *      and/or change their actions.
 *
 * Results:
 *      A standard Tcl return value.
 *
 * Side effects:
 *      A trace is set up on the variable given by varName, such that
 *      future references to the variable will be intermediated by
 *      proc.  See the manual entry for complete details on the calling
 *      sequence for proc.
 *
 *----------------------------------------------------------------------
 */

int
Tcl_TraceVar(interp, varName, flags, proc, clientData)
    Tcl_Interp *interp;         /* Interpreter in which variable is
                                 * to be traced. */
    char *varName;              /* Name of variable;  may end with "(index)"
                                 * to signify an array reference. */
    int flags;                  /* OR-ed collection of bits, including any
                                 * of TCL_TRACE_READS, TCL_TRACE_WRITES,
                                 * TCL_TRACE_UNSETS, and TCL_GLOBAL_ONLY. */
    Tcl_VarTraceProc *proc;     /* Procedure to call when specified ops are
                                 * invoked upon varName. */
    ClientData clientData;      /* Arbitrary argument to pass to proc. */
{
    register char *p;

    /*
     * If varName refers to an array (it ends with a parenthesized
     * element name), then handle it specially.
     */

    for (p = varName; *p != '\0'; p++) {
        if (*p == '(') {
            int result;
            char *open = p;

            do {
                p++;
            } while (*p != '\0');
            p--;
            if (*p != ')') {
                goto scalar;
            }
            *open = '\0';
            *p = '\0';
            result = Tcl_TraceVar2(interp, varName, open+1, flags,
                    proc, clientData);
            *open = '(';
            *p = ')';
            return result;
        }
    }

    scalar:
    return Tcl_TraceVar2(interp, varName, (char *) NULL, flags,
            proc, clientData);
}
\f
/*
 *----------------------------------------------------------------------
 *
 * Tcl_TraceVar2 --
 *
 *      Arrange for reads and/or writes to a variable to cause a
 *      procedure to be invoked, which can monitor the operations
 *      and/or change their actions.
 *
 * Results:
 *      A standard Tcl return value.
 *
 * Side effects:
 *      A trace is set up on the variable given by name1 and name2, such
 *      that future references to the variable will be intermediated by
 *      proc.  See the manual entry for complete details on the calling
 *      sequence for proc.
 *
 *----------------------------------------------------------------------
 */

int
Tcl_TraceVar2(interp, name1, name2, flags, proc, clientData)
    Tcl_Interp *interp;         /* Interpreter in which variable is
                                 * to be traced. */
    char *name1;                /* Name of scalar variable or array. */
    char *name2;                /* Name of element within array;  NULL means
                                 * trace applies to scalar variable or array
                                 * as-a-whole. */
    int flags;                  /* OR-ed collection of bits, including any
                                 * of TCL_TRACE_READS, TCL_TRACE_WRITES,
                                 * TCL_TRACE_UNSETS, and TCL_GLOBAL_ONLY. */
    Tcl_VarTraceProc *proc;     /* Procedure to call when specified ops are
                                 * invoked upon varName. */
    ClientData clientData;      /* Arbitrary argument to pass to proc. */
{
    Tcl_HashEntry *hPtr;
    Var *varPtr = NULL;         /* Initial value only used to stop compiler
                                 * from complaining; not really needed. */
    Interp *iPtr = (Interp *) interp;
    register VarTrace *tracePtr;
    int new;

    /*
     * Locate the variable, making a new (undefined) one if necessary.
     */

    if ((flags & TCL_GLOBAL_ONLY) || (iPtr->varFramePtr == NULL)) {
        hPtr = Tcl_CreateHashEntry(&iPtr->globalTable, name1, &new);
    } else {
        hPtr = Tcl_CreateHashEntry(&iPtr->varFramePtr->varTable, name1, &new);
    }
    if (!new) {
        varPtr = (Var *) Tcl_GetHashValue(hPtr);
        if (varPtr->flags & VAR_UPVAR) {
            hPtr = varPtr->value.upvarPtr;
            varPtr = (Var *) Tcl_GetHashValue(hPtr);
        }
    }

    /*
     * If the trace is to be on an array element, make sure that the
     * variable is an array variable.  If the variable doesn't exist
     * then define it as an empty array.  Then find the specific
     * array element.
     */

    if (name2 != NULL) {
        if (new) {
            varPtr = NewVar(0);
            Tcl_SetHashValue(hPtr, varPtr);
            varPtr->flags = VAR_ARRAY;
            varPtr->value.tablePtr = (Tcl_HashTable *)
                    ckalloc(sizeof(Tcl_HashTable));
            Tcl_InitHashTable(varPtr->value.tablePtr, TCL_STRING_KEYS);
        } else {
            if (varPtr->flags & VAR_UNDEFINED) {
                varPtr->flags = VAR_ARRAY;
                varPtr->value.tablePtr = (Tcl_HashTable *)
                        ckalloc(sizeof(Tcl_HashTable));
                Tcl_InitHashTable(varPtr->value.tablePtr, TCL_STRING_KEYS);
            } else if (!(varPtr->flags & VAR_ARRAY)) {
                iPtr->result = needArray;
                return TCL_ERROR;
            }
        }
        hPtr = Tcl_CreateHashEntry(varPtr->value.tablePtr, name2, &new);
    }

    if (new) {
        if ((name2 != NULL) && (varPtr->searchPtr != NULL)) {
            DeleteSearches(varPtr);
        }
        varPtr = NewVar(0);
        varPtr->flags = VAR_UNDEFINED;
        Tcl_SetHashValue(hPtr, varPtr);
    } else {
        varPtr = (Var *) Tcl_GetHashValue(hPtr);
    }

    /*
     * Set up trace information.
     */

    tracePtr = (VarTrace *) ckalloc(sizeof(VarTrace));
    tracePtr->traceProc = proc;
    tracePtr->clientData = clientData;
    tracePtr->flags = flags &
            (TCL_TRACE_READS|TCL_TRACE_WRITES|TCL_TRACE_UNSETS);
    tracePtr->nextPtr = varPtr->tracePtr;
    varPtr->tracePtr = tracePtr;
    return TCL_OK;
}
\f
/*
 *----------------------------------------------------------------------
 *
 * Tcl_UntraceVar --
 *
 *      Remove a previously-created trace for a variable.
 *
 * Results:
 *      None.
 *
 * Side effects:
 *      If there exists a trace for the variable given by varName
 *      with the given flags, proc, and clientData, then that trace
 *      is removed.
 *
 *----------------------------------------------------------------------
 */

void
Tcl_UntraceVar(interp, varName, flags, proc, clientData)
    Tcl_Interp *interp;         /* Interpreter containing traced variable. */
    char *varName;              /* Name of variable;  may end with "(index)"
                                 * to signify an array reference. */
    int flags;                  /* OR-ed collection of bits describing
                                 * current trace, including any of
                                 * TCL_TRACE_READS, TCL_TRACE_WRITES,
                                 * TCL_TRACE_UNSETS, and TCL_GLOBAL_ONLY. */
    Tcl_VarTraceProc *proc;     /* Procedure assocated with trace. */
    ClientData clientData;      /* Arbitrary argument to pass to proc. */
{
    register char *p;

    /*
     * If varName refers to an array (it ends with a parenthesized
     * element name), then handle it specially.
     */

    for (p = varName; *p != '\0'; p++) {
        if (*p == '(') {
            char *open = p;

            do {
                p++;
            } while (*p != '\0');
            p--;
            if (*p != ')') {
                goto scalar;
            }
            *open = '\0';
            *p = '\0';
            Tcl_UntraceVar2(interp, varName, open+1, flags, proc, clientData);
            *open = '(';
            *p = ')';
            return;
        }
    }

    scalar:
    Tcl_UntraceVar2(interp, varName, (char *) NULL, flags, proc, clientData);
}
\f
/*
 *----------------------------------------------------------------------
 *
 * Tcl_UntraceVar2 --
 *
 *      Remove a previously-created trace for a variable.
 *
 * Results:
 *      None.
 *
 * Side effects:
 *      If there exists a trace for the variable given by name1
 *      and name2 with the given flags, proc, and clientData, then
 *      that trace is removed.
 *
 *----------------------------------------------------------------------
 */

void
Tcl_UntraceVar2(interp, name1, name2, flags, proc, clientData)
    Tcl_Interp *interp;         /* Interpreter containing traced variable. */
    char *name1;                /* Name of variable or array. */
    char *name2;                /* Name of element within array;  NULL means
                                 * trace applies to scalar variable or array
                                 * as-a-whole. */
    int flags;                  /* OR-ed collection of bits describing
                                 * current trace, including any of
                                 * TCL_TRACE_READS, TCL_TRACE_WRITES,
                                 * TCL_TRACE_UNSETS, and TCL_GLOBAL_ONLY. */
    Tcl_VarTraceProc *proc;     /* Procedure assocated with trace. */
    ClientData clientData;      /* Arbitrary argument to pass to proc. */
{
    register VarTrace *tracePtr;
    VarTrace *prevPtr;
    Var *varPtr;
    Interp *iPtr = (Interp *) interp;
    Tcl_HashEntry *hPtr;
    ActiveVarTrace *activePtr;

    /*
     * First, lookup the variable.
     */

    if ((flags & TCL_GLOBAL_ONLY) || (iPtr->varFramePtr == NULL)) {
        hPtr = Tcl_FindHashEntry(&iPtr->globalTable, name1);
    } else {
        hPtr = Tcl_FindHashEntry(&iPtr->varFramePtr->varTable, name1);
    }
    if (hPtr == NULL) {
        return;
    }
    varPtr = (Var *) Tcl_GetHashValue(hPtr);
    if (varPtr->flags & VAR_UPVAR) {
        hPtr = varPtr->value.upvarPtr;
        varPtr = (Var *) Tcl_GetHashValue(hPtr);
    }
    if (name2 != NULL) {
        if (!(varPtr->flags & VAR_ARRAY)) {
            return;
        }
        hPtr = Tcl_FindHashEntry(varPtr->value.tablePtr, name2);
        if (hPtr == NULL) {
            return;
        }
        varPtr = (Var *) Tcl_GetHashValue(hPtr);
    }

    flags &= (TCL_TRACE_READS | TCL_TRACE_WRITES | TCL_TRACE_UNSETS);
    for (tracePtr = varPtr->tracePtr, prevPtr = NULL; ;
            prevPtr = tracePtr, tracePtr = tracePtr->nextPtr) {
        if (tracePtr == NULL) {
            return;
        }
        if ((tracePtr->traceProc == proc) && (tracePtr->flags == flags)
                && (tracePtr->clientData == clientData)) {
            break;
        }
    }

    /*
     * The code below makes it possible to delete traces while traces
     * are active:  it makes sure that the deleted trace won't be
     * processed by CallTraces.
     */

    for (activePtr = iPtr->activeTracePtr; activePtr != NULL;
            activePtr = activePtr->nextPtr) {
        if (activePtr->nextTracePtr == tracePtr) {
            activePtr->nextTracePtr = tracePtr->nextPtr;
        }
    }
    if (prevPtr == NULL) {
        varPtr->tracePtr = tracePtr->nextPtr;
    } else {
        prevPtr->nextPtr = tracePtr->nextPtr;
    }
    ckfree((char *) tracePtr);
}
\f
/*
 *----------------------------------------------------------------------
 *
 * Tcl_VarTraceInfo --
 *
 *      Return the clientData value associated with a trace on a
 *      variable.  This procedure can also be used to step through
 *      all of the traces on a particular variable that have the
 *      same trace procedure.
 *
 * Results:
 *      The return value is the clientData value associated with
 *      a trace on the given variable.  Information will only be
 *      returned for a trace with proc as trace procedure.  If
 *      the clientData argument is NULL then the first such trace is
 *      returned;  otherwise, the next relevant one after the one
 *      given by clientData will be returned.  If the variable
 *      doesn't exist, or if there are no (more) traces for it,
 *      then NULL is returned.
 *
 * Side effects:
 *      None.
 *
 *----------------------------------------------------------------------
 */

ClientData
Tcl_VarTraceInfo(interp, varName, flags, proc, prevClientData)
    Tcl_Interp *interp;         /* Interpreter containing variable. */
    char *varName;              /* Name of variable;  may end with "(index)"
                                 * to signify an array reference. */
    int flags;                  /* 0 or TCL_GLOBAL_ONLY. */
    Tcl_VarTraceProc *proc;     /* Procedure assocated with trace. */
    ClientData prevClientData;  /* If non-NULL, gives last value returned
                                 * by this procedure, so this call will
                                 * return the next trace after that one.
                                 * If NULL, this call will return the
                                 * first trace. */
{
    register char *p;

    /*
     * If varName refers to an array (it ends with a parenthesized
     * element name), then handle it specially.
     */

    for (p = varName; *p != '\0'; p++) {
        if (*p == '(') {
            ClientData result;
            char *open = p;

            do {
                p++;
            } while (*p != '\0');
            p--;
            if (*p != ')') {
                goto scalar;
            }
            *open = '\0';
            *p = '\0';
            result = Tcl_VarTraceInfo2(interp, varName, open+1, flags, proc,
                prevClientData);
            *open = '(';
            *p = ')';
            return result;
        }
    }

    scalar:
    return Tcl_VarTraceInfo2(interp, varName, (char *) NULL, flags, proc,
            prevClientData);
}
\f
/*
 *----------------------------------------------------------------------
 *
 * Tcl_VarTraceInfo2 --
 *
 *      Same as Tcl_VarTraceInfo, except takes name in two pieces
 *      instead of one.
 *
 * Results:
 *      Same as Tcl_VarTraceInfo.
 *
 * Side effects:
 *      None.
 *
 *----------------------------------------------------------------------
 */

ClientData
Tcl_VarTraceInfo2(interp, name1, name2, flags, proc, prevClientData)
    Tcl_Interp *interp;         /* Interpreter containing variable. */
    char *name1;                /* Name of variable or array. */
    char *name2;                /* Name of element within array;  NULL means
                                 * trace applies to scalar variable or array
                                 * as-a-whole. */
    int flags;                  /* 0 or TCL_GLOBAL_ONLY. */
    Tcl_VarTraceProc *proc;     /* Procedure assocated with trace. */
    ClientData prevClientData;  /* If non-NULL, gives last value returned
                                 * by this procedure, so this call will
                                 * return the next trace after that one.
                                 * If NULL, this call will return the
                                 * first trace. */
{
    register VarTrace *tracePtr;
    Var *varPtr;
    Interp *iPtr = (Interp *) interp;
    Tcl_HashEntry *hPtr;

    /*
     * First, lookup the variable.
     */

    if ((flags & TCL_GLOBAL_ONLY) || (iPtr->varFramePtr == NULL)) {
        hPtr = Tcl_FindHashEntry(&iPtr->globalTable, name1);
    } else {
        hPtr = Tcl_FindHashEntry(&iPtr->varFramePtr->varTable, name1);
    }
    if (hPtr == NULL) {
        return NULL;
    }
    varPtr = (Var *) Tcl_GetHashValue(hPtr);
    if (varPtr->flags & VAR_UPVAR) {
        hPtr = varPtr->value.upvarPtr;
        varPtr = (Var *) Tcl_GetHashValue(hPtr);
    }
    if (name2 != NULL) {
        if (!(varPtr->flags & VAR_ARRAY)) {
            return NULL;
        }
        hPtr = Tcl_FindHashEntry(varPtr->value.tablePtr, name2);
        if (hPtr == NULL) {
            return NULL;
        }
        varPtr = (Var *) Tcl_GetHashValue(hPtr);
    }

    /*
     * Find the relevant trace, if any, and return its clientData.
     */

    tracePtr = varPtr->tracePtr;
    if (prevClientData != NULL) {
        for ( ; tracePtr != NULL; tracePtr = tracePtr->nextPtr) {
            if ((tracePtr->clientData == prevClientData)
                    && (tracePtr->traceProc == proc)) {
                tracePtr = tracePtr->nextPtr;
                break;
            }
        }
    }
    for ( ; tracePtr != NULL; tracePtr = tracePtr->nextPtr) {
        if (tracePtr->traceProc == proc) {
            return tracePtr->clientData;
        }
    }
    return NULL;
}
\f
/*
 *----------------------------------------------------------------------
 *
 * Tcl_SetCmd --
 *
 *      This procedure is invoked to process the "set" Tcl command.
 *      See the user documentation for details on what it does.
 *
 * Results:
 *      A standard Tcl result value.
 *
 * Side effects:
 *      A variable's value may be changed.
 *
 *----------------------------------------------------------------------
 */

        /* ARGSUSED */
int
Tcl_SetCmd(dummy, interp, argc, argv)
    ClientData dummy;                   /* Not used. */
    register Tcl_Interp *interp;        /* Current interpreter. */
    int argc;                           /* Number of arguments. */
    char **argv;                        /* Argument strings. */
{
    if (argc == 2) {
        char *value;

        value = Tcl_GetVar(interp, argv[1], TCL_LEAVE_ERR_MSG);
        if (value == NULL) {
            return TCL_ERROR;
        }
        interp->result = value;
        return TCL_OK;
    } else if (argc == 3) {
        char *result;

        result = Tcl_SetVar(interp, argv[1], argv[2], TCL_LEAVE_ERR_MSG);
        if (result == NULL) {
            return TCL_ERROR;
        }
        interp->result = result;
        return TCL_OK;
    } else {
        Tcl_AppendResult(interp, "wrong # args: should be \"",
                argv[0], " varName ?newValue?\"", (char *) NULL);
        return TCL_ERROR;
    }
}
\f
/*
 *----------------------------------------------------------------------
 *
 * Tcl_UnsetCmd --
 *
 *      This procedure is invoked to process the "unset" Tcl command.
 *      See the user documentation for details on what it does.
 *
 * Results:
 *      A standard Tcl result value.
 *
 * Side effects:
 *      See the user documentation.
 *
 *----------------------------------------------------------------------
 */

        /* ARGSUSED */
int
Tcl_UnsetCmd(dummy, interp, argc, argv)
    ClientData dummy;                   /* Not used. */
    register Tcl_Interp *interp;        /* Current interpreter. */
    int argc;                           /* Number of arguments. */
    char **argv;                        /* Argument strings. */
{
    int i;

    if (argc < 2) {
        Tcl_AppendResult(interp, "wrong # args: should be \"",
                argv[0], " varName ?varName ...?\"", (char *) NULL);
        return TCL_ERROR;
    }
    for (i = 1; i < argc; i++) {
        if (Tcl_UnsetVar(interp, argv[i], TCL_LEAVE_ERR_MSG) != 0) {
            return TCL_ERROR;
        }
    }
    return TCL_OK;
}
\f
/*
 *----------------------------------------------------------------------
 *
 * Tcl_AppendCmd --
 *
 *      This procedure is invoked to process the "append" Tcl command.
 *      See the user documentation for details on what it does.
 *
 * Results:
 *      A standard Tcl result value.
 *
 * Side effects:
 *      A variable's value may be changed.
 *
 *----------------------------------------------------------------------
 */

        /* ARGSUSED */
int
Tcl_AppendCmd(dummy, interp, argc, argv)
    ClientData dummy;                   /* Not used. */
    register Tcl_Interp *interp;        /* Current interpreter. */
    int argc;                           /* Number of arguments. */
    char **argv;                        /* Argument strings. */
{
    int i;
    char *result = NULL;                /* (Initialization only needed to keep
                                         * the compiler from complaining) */

    if (argc < 3) {
        Tcl_AppendResult(interp, "wrong # args: should be \"",
                argv[0], " varName value ?value ...?\"", (char *) NULL);
        return TCL_ERROR;
    }

    for (i = 2; i < argc; i++) {
        result = Tcl_SetVar(interp, argv[1], argv[i],
                TCL_APPEND_VALUE|TCL_LEAVE_ERR_MSG);
        if (result == NULL) {
            return TCL_ERROR;
        }
    }
    interp->result = result;
    return TCL_OK;
}
\f
/*
 *----------------------------------------------------------------------
 *
 * Tcl_LappendCmd --
 *
 *      This procedure is invoked to process the "lappend" Tcl command.
 *      See the user documentation for details on what it does.
 *
 * Results:
 *      A standard Tcl result value.
 *
 * Side effects:
 *      A variable's value may be changed.
 *
 *----------------------------------------------------------------------
 */

        /* ARGSUSED */
int
Tcl_LappendCmd(dummy, interp, argc, argv)
    ClientData dummy;                   /* Not used. */
    register Tcl_Interp *interp;        /* Current interpreter. */
    int argc;                           /* Number of arguments. */
    char **argv;                        /* Argument strings. */
{
    int i;
    char *result = NULL;                /* (Initialization only needed to keep
                                         * the compiler from complaining) */

    if (argc < 3) {
        Tcl_AppendResult(interp, "wrong # args: should be \"",
                argv[0], " varName value ?value ...?\"", (char *) NULL);
        return TCL_ERROR;
    }

    for (i = 2; i < argc; i++) {
        result = Tcl_SetVar(interp, argv[1], argv[i],
                TCL_APPEND_VALUE|TCL_LIST_ELEMENT|TCL_LEAVE_ERR_MSG);
        if (result == NULL) {
            return TCL_ERROR;
        }
    }
    interp->result = result;
    return TCL_OK;
}
\f
/*
 *----------------------------------------------------------------------
 *
 * Tcl_ArrayCmd --
 *
 *      This procedure is invoked to process the "array" Tcl command.
 *      See the user documentation for details on what it does.
 *
 * Results:
 *      A standard Tcl result value.
 *
 * Side effects:
 *      See the user documentation.
 *
 *----------------------------------------------------------------------
 */

        /* ARGSUSED */
int
Tcl_ArrayCmd(dummy, interp, argc, argv)
    ClientData dummy;                   /* Not used. */
    register Tcl_Interp *interp;        /* Current interpreter. */
    int argc;                           /* Number of arguments. */
    char **argv;                        /* Argument strings. */
{
    int length;
    char c;
    Var *varPtr;
    Tcl_HashEntry *hPtr;
    Interp *iPtr = (Interp *) interp;

    if (argc < 3) {
        Tcl_AppendResult(interp, "wrong # args: should be \"",
                argv[0], " option arrayName ?arg ...?\"", (char *) NULL);
        return TCL_ERROR;
    }

    /*
     * Locate the array variable (and it better be an array).
     */

    if (iPtr->varFramePtr == NULL) {
        hPtr = Tcl_FindHashEntry(&iPtr->globalTable, argv[2]);
    } else {
        hPtr = Tcl_FindHashEntry(&iPtr->varFramePtr->varTable, argv[2]);
    }
    if (hPtr == NULL) {
        notArray:
        Tcl_AppendResult(interp, "\"", argv[2], "\" isn't an array",
                (char *) NULL);
        return TCL_ERROR;
    }
    varPtr = (Var *) Tcl_GetHashValue(hPtr);
    if (varPtr->flags & VAR_UPVAR) {
        varPtr = (Var *) Tcl_GetHashValue(varPtr->value.upvarPtr);
    }
    if (!(varPtr->flags & VAR_ARRAY)) {
        goto notArray;
    }

    /*
     * Dispatch based on the option.
     */

    c = argv[1][0];
    length = strlen(argv[1]);
    if ((c == 'a') && (strncmp(argv[1], "anymore", length) == 0)) {
        ArraySearch *searchPtr;

        if (argc != 4) {
            Tcl_AppendResult(interp, "wrong # args: should be \"",
                    argv[0], " anymore arrayName searchId\"", (char *) NULL);
            return TCL_ERROR;
        }
        searchPtr = ParseSearchId(interp, varPtr, argv[2], argv[3]);
        if (searchPtr == NULL) {
            return TCL_ERROR;
        }
        while (1) {
            Var *varPtr2;

            if (searchPtr->nextEntry != NULL) {
                varPtr2 = (Var *) Tcl_GetHashValue(searchPtr->nextEntry);
                if (!(varPtr2->flags & VAR_UNDEFINED)) {
                    break;
                }
            }
            searchPtr->nextEntry = Tcl_NextHashEntry(&searchPtr->search);
            if (searchPtr->nextEntry == NULL) {
                interp->result = "0";
                return TCL_OK;
            }
        }
        interp->result = "1";
        return TCL_OK;
    } else if ((c == 'd') && (strncmp(argv[1], "donesearch", length) == 0)) {
        ArraySearch *searchPtr, *prevPtr;

        if (argc != 4) {
            Tcl_AppendResult(interp, "wrong # args: should be \"",
                    argv[0], " donesearch arrayName searchId\"", (char *) NULL);
            return TCL_ERROR;
        }
        searchPtr = ParseSearchId(interp, varPtr, argv[2], argv[3]);
        if (searchPtr == NULL) {
            return TCL_ERROR;
        }
        if (varPtr->searchPtr == searchPtr) {
            varPtr->searchPtr = searchPtr->nextPtr;
        } else {
            for (prevPtr = varPtr->searchPtr; ; prevPtr = prevPtr->nextPtr) {
                if (prevPtr->nextPtr == searchPtr) {
                    prevPtr->nextPtr = searchPtr->nextPtr;
                    break;
                }
            }
        }
        ckfree((char *) searchPtr);
    } else if ((c == 'n') && (strncmp(argv[1], "names", length) == 0)
            && (length >= 2)) {
        Tcl_HashSearch search;
        Var *varPtr2;

        if (argc != 3) {
            Tcl_AppendResult(interp, "wrong # args: should be \"",
                    argv[0], " names arrayName\"", (char *) NULL);
            return TCL_ERROR;
        }
        for (hPtr = Tcl_FirstHashEntry(varPtr->value.tablePtr, &search);
                hPtr != NULL; hPtr = Tcl_NextHashEntry(&search)) {
            varPtr2 = (Var *) Tcl_GetHashValue(hPtr);
            if (varPtr2->flags & VAR_UNDEFINED) {
                continue;
            }
            Tcl_AppendElement(interp,
                    Tcl_GetHashKey(varPtr->value.tablePtr, hPtr), 0);
        }
    } else if ((c == 'n') && (strncmp(argv[1], "nextelement", length) == 0)
            && (length >= 2)) {
        ArraySearch *searchPtr;
        Tcl_HashEntry *hPtr;

        if (argc != 4) {
            Tcl_AppendResult(interp, "wrong # args: should be \"",
                    argv[0], " nextelement arrayName searchId\"",
                    (char *) NULL);
            return TCL_ERROR;
        }
        searchPtr = ParseSearchId(interp, varPtr, argv[2], argv[3]);
        if (searchPtr == NULL) {
            return TCL_ERROR;
        }
        while (1) {
            Var *varPtr2;

            hPtr = searchPtr->nextEntry;
            if (hPtr == NULL) {
                hPtr = Tcl_NextHashEntry(&searchPtr->search);
                if (hPtr == NULL) {
                    return TCL_OK;
                }
            } else {
                searchPtr->nextEntry = NULL;
            }
            varPtr2 = (Var *) Tcl_GetHashValue(hPtr);
            if (!(varPtr2->flags & VAR_UNDEFINED)) {
                break;
            }
        }
        interp->result = Tcl_GetHashKey(varPtr->value.tablePtr, hPtr);
    } else if ((c == 's') && (strncmp(argv[1], "size", length) == 0)
            && (length >= 2)) {
        Tcl_HashSearch search;
        Var *varPtr2;
        int size;

        if (argc != 3) {
            Tcl_AppendResult(interp, "wrong # args: should be \"",
                    argv[0], " size arrayName\"", (char *) NULL);
            return TCL_ERROR;
        }
        size = 0;
        for (hPtr = Tcl_FirstHashEntry(varPtr->value.tablePtr, &search);
                hPtr != NULL; hPtr = Tcl_NextHashEntry(&search)) {
            varPtr2 = (Var *) Tcl_GetHashValue(hPtr);
            if (varPtr2->flags & VAR_UNDEFINED) {
                continue;
            }
            size++;
        }
        sprintf(interp->result, "%d", size);
    } else if ((c == 's') && (strncmp(argv[1], "startsearch", length) == 0)
            && (length >= 2)) {
        ArraySearch *searchPtr;

        if (argc != 3) {
            Tcl_AppendResult(interp, "wrong # args: should be \"",
                    argv[0], " startsearch arrayName\"", (char *) NULL);
            return TCL_ERROR;
        }
        searchPtr = (ArraySearch *) ckalloc(sizeof(ArraySearch));
        if (varPtr->searchPtr == NULL) {
            searchPtr->id = 1;
            Tcl_AppendResult(interp, "s-1-", argv[2], (char *) NULL);
        } else {
            char string[20];

            searchPtr->id = varPtr->searchPtr->id + 1;
            sprintf(string, "%d", searchPtr->id);
            Tcl_AppendResult(interp, "s-", string, "-", argv[2],
                    (char *) NULL);
        }
        searchPtr->varPtr = varPtr;
        searchPtr->nextEntry = Tcl_FirstHashEntry(varPtr->value.tablePtr,
                &searchPtr->search);
        searchPtr->nextPtr = varPtr->searchPtr;
        varPtr->searchPtr = searchPtr;
    } else {
        Tcl_AppendResult(interp, "bad option \"", argv[1],
                "\": should be anymore, donesearch, names, nextelement, ",
                "size, or startsearch", (char *) NULL);
        return TCL_ERROR;
    }
    return TCL_OK;
}
\f
/*
 *----------------------------------------------------------------------
 *
 * Tcl_GlobalCmd --
 *
 *      This procedure is invoked to process the "global" Tcl command.
 *      See the user documentation for details on what it does.
 *
 * Results:
 *      A standard Tcl result value.
 *
 * Side effects:
 *      See the user documentation.
 *
 *----------------------------------------------------------------------
 */

        /* ARGSUSED */
int
Tcl_GlobalCmd(dummy, interp, argc, argv)
    ClientData dummy;                   /* Not used. */
    Tcl_Interp *interp;                 /* Current interpreter. */
    int argc;                           /* Number of arguments. */
    char **argv;                        /* Argument strings. */
{
    Var *varPtr, *gVarPtr;
    register Interp *iPtr = (Interp *) interp;
    Tcl_HashEntry *hPtr, *hPtr2;
    int new;

    if (argc < 2) {
        Tcl_AppendResult((Tcl_Interp *) iPtr, "wrong # args: should be \"",
                argv[0], " varName ?varName ...?\"", (char *) NULL);
        return TCL_ERROR;
    }
    if (iPtr->varFramePtr == NULL) {
        return TCL_OK;
    }

    for (argc--, argv++; argc > 0; argc--, argv++) {
        hPtr = Tcl_CreateHashEntry(&iPtr->globalTable, *argv, &new);
        if (new) {
            gVarPtr = NewVar(0);
            gVarPtr->flags |= VAR_UNDEFINED;
            Tcl_SetHashValue(hPtr, gVarPtr);
        } else {
            gVarPtr = (Var *) Tcl_GetHashValue(hPtr);
        }
        hPtr2 = Tcl_CreateHashEntry(&iPtr->varFramePtr->varTable, *argv, &new);
        if (!new) {
            Var *varPtr;
            varPtr = (Var *) Tcl_GetHashValue(hPtr2);
            if (varPtr->flags & VAR_UPVAR) {
                continue;
            } else {
                Tcl_AppendResult((Tcl_Interp *) iPtr, "variable \"", *argv,
                    "\" already exists", (char *) NULL);
                return TCL_ERROR;
            }
        }
        varPtr = NewVar(0);
        varPtr->flags |= VAR_UPVAR;
        varPtr->value.upvarPtr = hPtr;
        gVarPtr->upvarUses++;
        Tcl_SetHashValue(hPtr2, varPtr);
    }
    return TCL_OK;
}
\f
/*
 *----------------------------------------------------------------------
 *
 * Tcl_UpvarCmd --
 *
 *      This procedure is invoked to process the "upvar" Tcl command.
 *      See the user documentation for details on what it does.
 *
 * Results:
 *      A standard Tcl result value.
 *
 * Side effects:
 *      See the user documentation.
 *
 *----------------------------------------------------------------------
 */

        /* ARGSUSED */
int
Tcl_UpvarCmd(dummy, interp, argc, argv)
    ClientData dummy;                   /* Not used. */
    Tcl_Interp *interp;                 /* Current interpreter. */
    int argc;                           /* Number of arguments. */
    char **argv;                        /* Argument strings. */
{
    register Interp *iPtr = (Interp *) interp;
    int result;
    CallFrame *framePtr;
    Var *varPtr = NULL;
    Tcl_HashTable *upVarTablePtr;
    Tcl_HashEntry *hPtr, *hPtr2;
    int new;
    Var *upVarPtr;

    if (argc < 3) {
        upvarSyntax:
        Tcl_AppendResult(interp, "wrong # args: should be \"", argv[0],
                " ?level? otherVar localVar ?otherVar localVar ...?\"",
                (char *) NULL);
        return TCL_ERROR;
    }

    /*
     * Find the hash table containing the variable being referenced.
     */

    result = TclGetFrame(interp, argv[1], &framePtr);
    if (result == -1) {
        return TCL_ERROR;
    }
    argc -= result+1;
    argv += result+1;
    if (framePtr == NULL) {
        upVarTablePtr = &iPtr->globalTable;
    } else {
        upVarTablePtr = &framePtr->varTable;
    }

    if ((argc & 1) != 0) {
        goto upvarSyntax;
    }

    /*
     * Iterate over all the pairs of (local variable, other variable)
     * names.  For each pair, create a hash table entry in the upper
     * context (if the name wasn't there already), then associate it
     * with a new local variable.
     */

    while (argc > 0) {
        hPtr = Tcl_CreateHashEntry(upVarTablePtr, argv[0], &new);
        if (new) {
            upVarPtr = NewVar(0);
            upVarPtr->flags |= VAR_UNDEFINED;
            Tcl_SetHashValue(hPtr, upVarPtr);
        } else {
            upVarPtr = (Var *) Tcl_GetHashValue(hPtr);
            if (upVarPtr->flags & VAR_UPVAR) {
                hPtr = upVarPtr->value.upvarPtr;
                upVarPtr = (Var *) Tcl_GetHashValue(hPtr);
            }
        }

        hPtr2 = Tcl_CreateHashEntry(&iPtr->varFramePtr->varTable,
                    argv[1], &new);
        if (!new) {
            Tcl_AppendResult((Tcl_Interp *) iPtr, "variable \"", argv[1],
                "\" already exists", (char *) NULL);
            return TCL_ERROR;
        }
        varPtr = NewVar(0);
        varPtr->flags |= VAR_UPVAR;
        varPtr->value.upvarPtr = hPtr;
        upVarPtr->upvarUses++;
        Tcl_SetHashValue(hPtr2, varPtr);

        argc -= 2;
        argv += 2;
    }
    return TCL_OK;
}
\f
/*
 *----------------------------------------------------------------------
 *
 * TclDeleteVars --
 *
 *      This procedure is called to recycle all the storage space
 *      associated with a table of variables.  For this procedure
 *      to work correctly, it must not be possible for any of the
 *      variable in the table to be accessed from Tcl commands
 *      (e.g. from trace procedures).
 *
 * Results:
 *      None.
 *
 * Side effects:
 *      Variables are deleted and trace procedures are invoked, if
 *      any are declared.
 *
 *----------------------------------------------------------------------
 */

void
TclDeleteVars(iPtr, tablePtr)
    Interp *iPtr;               /* Interpreter to which variables belong. */
    Tcl_HashTable *tablePtr;    /* Hash table containing variables to
                                 * delete. */
{
    Tcl_HashSearch search;
    Tcl_HashEntry *hPtr;
    register Var *varPtr;
    int flags, globalFlag;

    flags = TCL_TRACE_UNSETS;
    if (tablePtr == &iPtr->globalTable) {
        flags |= TCL_INTERP_DESTROYED | TCL_GLOBAL_ONLY;
    }
    for (hPtr = Tcl_FirstHashEntry(tablePtr, &search); hPtr != NULL;
            hPtr = Tcl_NextHashEntry(&search)) {
        varPtr = (Var *) Tcl_GetHashValue(hPtr);

        /*
         * For global/upvar variables referenced in procedures, free up the
         * local space and then decrement the reference count on the
         * variable referred to.  If there are no more references to the
         * global/upvar and it is undefined and has no traces set, then
         * follow on and delete the referenced variable too.
         */

        globalFlag = 0;
        if (varPtr->flags & VAR_UPVAR) {
            hPtr = varPtr->value.upvarPtr;
            ckfree((char *) varPtr);
            varPtr = (Var *) Tcl_GetHashValue(hPtr);
            varPtr->upvarUses--;
            if ((varPtr->upvarUses != 0) || !(varPtr->flags & VAR_UNDEFINED)
                    || (varPtr->tracePtr != NULL)) {
                continue;
            }
            globalFlag = TCL_GLOBAL_ONLY;
        }

        /*
         * Invoke traces on the variable that is being deleted, then
         * free up the variable's space (no need to free the hash entry
         * here, unless we're dealing with a global variable:  the
         * hash entries will be deleted automatically when the whole
         * table is deleted).
         */

        if (varPtr->tracePtr != NULL) {
            (void) CallTraces(iPtr, (Var *) NULL, hPtr,
                    Tcl_GetHashKey(tablePtr, hPtr), (char *) NULL,
                    flags | globalFlag);
            while (varPtr->tracePtr != NULL) {
                VarTrace *tracePtr = varPtr->tracePtr;
                varPtr->tracePtr = tracePtr->nextPtr;
                ckfree((char *) tracePtr);
            }
        }
        if (varPtr->flags & VAR_ARRAY) {
            DeleteArray(iPtr, Tcl_GetHashKey(tablePtr, hPtr), varPtr,
                    flags | globalFlag);
        }
        if (globalFlag) {
            Tcl_DeleteHashEntry(hPtr);
        }
        ckfree((char *) varPtr);
    }
    Tcl_DeleteHashTable(tablePtr);
}
\f
/*
 *----------------------------------------------------------------------
 *
 * CallTraces --
 *
 *      This procedure is invoked to find and invoke relevant
 *      trace procedures associated with a particular operation on
 *      a variable.  This procedure invokes traces both on the
 *      variable and on its containing array (where relevant).
 *
 * Results:
 *      The return value is NULL if no trace procedures were invoked, or
 *      if all the invoked trace procedures returned successfully.
 *      The return value is non-zero if a trace procedure returned an
 *      error (in this case no more trace procedures were invoked after
 *      the error was returned).  In this case the return value is a
 *      pointer to a static string describing the error.
 *
 * Side effects:
 *      Almost anything can happen, depending on trace;  this procedure
 *      itself doesn't have any side effects.
 *
 *----------------------------------------------------------------------
 */

static char *
CallTraces(iPtr, arrayPtr, hPtr, name1, name2, flags)
    Interp *iPtr;                       /* Interpreter containing variable. */
    register Var *arrayPtr;             /* Pointer to array variable that
                                         * contains the variable, or NULL if
                                         * the variable isn't an element of an
                                         * array. */
    Tcl_HashEntry *hPtr;                /* Hash table entry corresponding to
                                         * variable whose traces are to be
                                         * invoked. */
    char *name1, *name2;                /* Variable's two-part name. */
    int flags;                          /* Flags to pass to trace procedures:
                                         * indicates what's happening to
                                         * variable, plus other stuff like
                                         * TCL_GLOBAL_ONLY and
                                         * TCL_INTERP_DESTROYED. */
{
    Var *varPtr;
    register VarTrace *tracePtr;
    ActiveVarTrace active;
    char *result;
    int savedArrayFlags = 0;            /* (Initialization not needed except
                                         * to prevent compiler warning) */

    /*
     * If there are already similar trace procedures active for the
     * variable, don't call them again.
     */

    varPtr = (Var *) Tcl_GetHashValue(hPtr);
    if (varPtr->flags & VAR_TRACE_ACTIVE) {
        return NULL;
    }
    varPtr->flags |= VAR_TRACE_ACTIVE;

    /*
     * Invoke traces on the array containing the variable, if relevant.
     */

    result = NULL;
    active.nextPtr = iPtr->activeTracePtr;
    iPtr->activeTracePtr = &active;
    if (arrayPtr != NULL) {
        savedArrayFlags = arrayPtr->flags;
        arrayPtr->flags |= VAR_ELEMENT_ACTIVE;
        for (tracePtr = arrayPtr->tracePtr;  tracePtr != NULL;
                tracePtr = active.nextTracePtr) {
            active.nextTracePtr = tracePtr->nextPtr;
            if (!(tracePtr->flags & flags)) {
                continue;
            }
            result = (*tracePtr->traceProc)(tracePtr->clientData,
                    (Tcl_Interp *) iPtr, name1, name2, flags);
            if (result != NULL) {
                if (flags & TCL_TRACE_UNSETS) {
                    result = NULL;
                } else {
                    goto done;
                }
            }
        }
    }

    /*
     * Invoke traces on the variable itself.
     */

    if (flags & TCL_TRACE_UNSETS) {
        flags |= TCL_TRACE_DESTROYED;
    }
    for (tracePtr = varPtr->tracePtr; tracePtr != NULL;
            tracePtr = active.nextTracePtr) {
        active.nextTracePtr = tracePtr->nextPtr;
        if (!(tracePtr->flags & flags)) {
            continue;
        }
        result = (*tracePtr->traceProc)(tracePtr->clientData,
                (Tcl_Interp *) iPtr, name1, name2, flags);
        if (result != NULL) {
            if (flags & TCL_TRACE_UNSETS) {
                result = NULL;
            } else {
                goto done;
            }
        }
    }

    /*
     * Restore the variable's flags, remove the record of our active
     * traces, and then return.  Remember that the variable could have
     * been re-allocated during the traces, but its hash entry won't
     * change.
     */

    done:
    if (arrayPtr != NULL) {
        arrayPtr->flags = savedArrayFlags;
    }
    varPtr = (Var *) Tcl_GetHashValue(hPtr);
    varPtr->flags &= ~VAR_TRACE_ACTIVE;
    iPtr->activeTracePtr = active.nextPtr;
    return result;
}
\f
/*
 *----------------------------------------------------------------------
 *
 * NewVar --
 *
 *      Create a new variable with a given initial value.
 *
 * Results:
 *      The return value is a pointer to the new variable structure.
 *      The variable will not be part of any hash table yet, and its
 *      upvarUses count is initialized to 0.  Its initial value will
 *      be empty, but "space" bytes will be available in the value
 *      area.
 *
 * Side effects:
 *      Storage gets allocated.
 *
 *----------------------------------------------------------------------
 */

static Var *
NewVar(space)
    int space;          /* Minimum amount of space to allocate
                         * for variable's value. */
{
    int extra;
    register Var *varPtr;

    extra = space - sizeof(varPtr->value);
    if (extra < 0) {
        extra = 0;
        space = sizeof(varPtr->value);
    }
    varPtr = (Var *) ckalloc((unsigned) (sizeof(Var) + extra));
    varPtr->valueLength = 0;
    varPtr->valueSpace = space;
    varPtr->upvarUses = 0;
    varPtr->tracePtr = NULL;
    varPtr->searchPtr = NULL;
    varPtr->flags = 0;
    varPtr->value.string[0] = 0;
    return varPtr;
}
\f
/*
 *----------------------------------------------------------------------
 *
 * ParseSearchId --
 *
 *      This procedure translates from a string to a pointer to an
 *      active array search (if there is one that matches the string).
 *
 * Results:
 *      The return value is a pointer to the array search indicated
 *      by string, or NULL if there isn't one.  If NULL is returned,
 *      interp->result contains an error message.
 *
 * Side effects:
 *      None.
 *
 *----------------------------------------------------------------------
 */

static ArraySearch *
ParseSearchId(interp, varPtr, varName, string)
    Tcl_Interp *interp;         /* Interpreter containing variable. */
    Var *varPtr;                /* Array variable search is for. */
    char *varName;              /* Name of array variable that search is
                                 * supposed to be for. */
    char *string;               /* String containing id of search.  Must have
                                 * form "search-num-var" where "num" is a
                                 * decimal number and "var" is a variable
                                 * name. */
{
    char *end;
    int id;
    ArraySearch *searchPtr;

    /*
     * Parse the id into the three parts separated by dashes.
     */

    if ((string[0] != 's') || (string[1] != '-')) {
        syntax:
        Tcl_AppendResult(interp, "illegal search identifier \"", string,
                "\"", (char *) NULL);
        return NULL;
    }
    id = strtoul(string+2, &end, 10);
    if ((end == (string+2)) || (*end != '-')) {
        goto syntax;
    }
    if (strcmp(end+1, varName) != 0) {
        Tcl_AppendResult(interp, "search identifier \"", string,
                "\" isn't for variable \"", varName, "\"", (char *) NULL);
        return NULL;
    }

    /*
     * Search through the list of active searches on the interpreter
     * to see if the desired one exists.
     */

    for (searchPtr = varPtr->searchPtr; searchPtr != NULL;
            searchPtr = searchPtr->nextPtr) {
        if (searchPtr->id == id) {
            return searchPtr;
        }
    }
    Tcl_AppendResult(interp, "couldn't find search \"", string, "\"",
            (char *) NULL);
    return NULL;
}
\f
/*
 *----------------------------------------------------------------------
 *
 * DeleteSearches --
 *
 *      This procedure is called to free up all of the searches
 *      associated with an array variable.
 *
 * Results:
 *      None.
 *
 * Side effects:
 *      Memory is released to the storage allocator.
 *
 *----------------------------------------------------------------------
 */

static void
DeleteSearches(arrayVarPtr)
    register Var *arrayVarPtr;          /* Variable whose searches are
                                         * to be deleted. */
{
    ArraySearch *searchPtr;

    while (arrayVarPtr->searchPtr != NULL) {
        searchPtr = arrayVarPtr->searchPtr;
        arrayVarPtr->searchPtr = searchPtr->nextPtr;
        ckfree((char *) searchPtr);
    }
}
\f
/*
 *----------------------------------------------------------------------
 *
 * DeleteArray --
 *
 *      This procedure is called to free up everything in an array
 *      variable.  It's the caller's responsibility to make sure
 *      that the array is no longer accessible before this procedure
 *      is called.
 *
 * Results:
 *      None.
 *
 * Side effects:
 *      All storage associated with varPtr's array elements is deleted
 *      (including the hash table).  Any delete trace procedures for
 *      array elements are invoked.
 *
 *----------------------------------------------------------------------
 */

static void
DeleteArray(iPtr, arrayName, varPtr, flags)
    Interp *iPtr;                       /* Interpreter containing array. */
    char *arrayName;                    /* Name of array (used for trace
                                         * callbacks). */
    Var *varPtr;                        /* Pointer to variable structure. */
    int flags;                          /* Flags to pass to CallTraces:
                                         * TCL_TRACE_UNSETS and sometimes
                                         * TCL_INTERP_DESTROYED and/or
                                         * TCL_GLOBAL_ONLY. */
{
    Tcl_HashSearch search;
    register Tcl_HashEntry *hPtr;
    register Var *elPtr;

    DeleteSearches(varPtr);
    for (hPtr = Tcl_FirstHashEntry(varPtr->value.tablePtr, &search);
            hPtr != NULL; hPtr = Tcl_NextHashEntry(&search)) {
        elPtr = (Var *) Tcl_GetHashValue(hPtr);
        if (elPtr->tracePtr != NULL) {
            (void) CallTraces(iPtr, (Var *) NULL, hPtr, arrayName,
                    Tcl_GetHashKey(varPtr->value.tablePtr, hPtr), flags);
            while (elPtr->tracePtr != NULL) {
                VarTrace *tracePtr = elPtr->tracePtr;
                elPtr->tracePtr = tracePtr->nextPtr;
                ckfree((char *) tracePtr);
            }
        }
        if (elPtr->flags & VAR_SEARCHES_POSSIBLE) {
            panic("DeleteArray found searches on array alement!");
        }
        ckfree((char *) elPtr);
    }
    Tcl_DeleteHashTable(varPtr->value.tablePtr);
    ckfree((char *) varPtr->value.tablePtr);
}
\f
/*
 *----------------------------------------------------------------------
 *
 * VarErrMsg --
 *
 *      Generate a reasonable error message describing why a variable
 *      operation failed.
 *
 * Results:
 *      None.
 *
 * Side effects:
 *      Interp->result is reset to hold a message identifying the
 *      variable given by name1 and name2 and describing why the
 *      variable operation failed.
 *
 *----------------------------------------------------------------------
 */

static void
VarErrMsg(interp, name1, name2, operation, reason)
    Tcl_Interp *interp;         /* Interpreter in which to record message. */
    char *name1, *name2;        /* Variable's two-part name. */
    char *operation;            /* String describing operation that failed,
                                 * e.g. "read", "set", or "unset". */
    char *reason;               /* String describing why operation failed. */
{
    Tcl_ResetResult(interp);
    Tcl_AppendResult(interp, "can't ", operation, " \"", name1, (char *) NULL);
    if (name2 != NULL) {
        Tcl_AppendResult(interp, "(", name2, ")", (char *) NULL);
    }
    Tcl_AppendResult(interp, "\": ", reason, (char *) NULL);
}