]> git.zerfleddert.de Git - ms2-kexec/blob - omap-hs-serial.c
projects / ms2-kexec / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
serial seems to work, but produces no output on headphone jack
[ms2-kexec] / omap-hs-serial.c
1 /*
2 * linux/drivers/serial/omap-serial.c
3 *
4 * Modified: Manasa Gangaiah
5 * Copyright (C) 2009 Texas Instrument Inc.
6 *
7 * Initial driver: Juha Yrjola
8 * Copyright (C) 2007 Nokia Corporation
9 *
10 * Based on drivers/serial/pxa.c by Nicolas Pitre.
11 * Copyright (C) 2003 Monta Vista Software, Inc.
12 *
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License as published by
15 * the Free Software Foundation; either version 2 of the License, or
16 * (at your option) any later version.
17 *
18 */
19
20 #if defined(CONFIG_SERIAL_OMAP_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
21 #define SUPPORT_SYSRQ
22 #endif
23
24 #include <linux/module.h>
25 #include <linux/init.h>
26 #include <linux/console.h>
27 #include <linux/serial_reg.h>
28 #include <linux/delay.h>
29 #include <linux/platform_device.h>
30 #include <linux/tty.h>
31 #include <linux/tty_flip.h>
32 #include <linux/serial_core.h>
33 #include <linux/io.h>
34 #include <linux/dma-mapping.h>
35 #include <linux/wakelock.h>
36 #include <linux/workqueue.h>
37
38 #include <asm/irq.h>
39 #include <asm/dma.h>
40
41 #include <plat/dmtimer.h>
42 #include <plat/omap-serial.h>
43 #include <mach/gpio.h>
44 #include <plat/dma.h>
45 #include <plat/io.h>
46 #ifdef CONFIG_OMAP3_PM
47 #include <../arch/arm/mach-omap2/ti-compat.h>
48 #include <../arch/arm/mach-omap2/prcm-regs.h>
49 #endif
50 #include <asm/mach/serial_omap.h>
51
52 unsigned long isr8250_activity;
53 static int gps_port;
54
55 void omap_uart_set_gps_port(int port)
56 {
57 gps_port = port;
58 }
59
60 #define CONSOLE_NAME "console="
61
62 #ifdef CONFIG_ARCH_OMAP34XX
63 #define OMAP_MDR1_DISABLE 0x07
64 #define OMAP_MDR1_MODE13X 0x03
65 #define OMAP_MDR1_MODE16X 0x00
66 #define OMAP_MODE13X_SPEED 230400
67 #endif
68
69
70 /* Debugging Macros */
71 #undef DEBUG
72
73 #ifdef DEBUG
74 #define DPRINTK printk
75 #else
76 #define DPRINTK(x...)
77 #endif
78
79 /*
80 * We default to IRQ0 for the "no irq" hack. Some
81 * machine types want others as well - they're free
82 * to redefine this in their header file.
83 */
84 #define is_real_interrupt(irq) ((irq) != 0)
85
86 /* TBD: move this to header file */
87 static u8 uart_dma_tx[MAX_UARTS + 1] =
88 { OMAP24XX_DMA_UART1_TX, OMAP24XX_DMA_UART2_TX, OMAP24XX_DMA_UART3_TX };
89 static u8 uart_dma_rx[MAX_UARTS + 1] =
90 { OMAP24XX_DMA_UART1_RX, OMAP24XX_DMA_UART2_RX, OMAP24XX_DMA_UART3_RX };
91
92
93 struct uart_omap_dma {
94 int rx_dma_channel;
95 int tx_dma_channel;
96 dma_addr_t rx_buf_dma_phys; /* Physical adress of RX DMA buffer */
97 dma_addr_t tx_buf_dma_phys; /* Physical adress of TX DMA buffer */
98 /*
99 * Buffer for rx dma.It is not required for tx because the buffer
100 * comes from port structure
101 */
102 unsigned char *rx_buf;
103 unsigned int prev_rx_dma_pos;
104 int tx_buf_size;
105 int tx_dma_state;
106 int rx_dma_state;
107 spinlock_t tx_lock;
108 spinlock_t rx_lock;
109 struct timer_list rx_timer;/* timer to poll activity on rx dma */
110 int rx_buf_size;
111 int rx_timeout;
112 };
113
114 struct uart_omap_port {
115 struct uart_port port;
116 struct uart_omap_dma uart_dma;
117 struct platform_device *pdev;
118
119 unsigned char ier;
120 unsigned char lcr;
121 unsigned char mcr;
122 int use_dma;
123 int is_buf_dma_alloced;
124 int restore_autorts;
125 /*
126 * Some bits in registers are cleared on a read, so they must
127 * be saved whenever the register is read but the bits will not
128 * be immediately processed.
129 */
130 unsigned int lsr_break_flag;
131 #define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
132 unsigned char msr_saved_flags;
133 char name[12];
134 int use_console;
135 spinlock_t uart_lock;
136 char dev_name[50];
137 #ifdef CONFIG_SERIAL_OMAP3430_HW_FLOW_CONTROL
138 unsigned char ctsrts;
139 #endif
140 struct work_struct tty_work;
141 };
142
143 static struct uart_omap_port *ui[MAX_UARTS + 1];
144 unsigned int fcr[MAX_UARTS];
145
146 static struct wake_lock omap_serial_wakelock;
147 static struct workqueue_struct *omap_serial_workqueue;
148
149 /* Forward declaration of dma callback functions */
150 static void uart_tx_dma_callback(int lch, u16 ch_status, void *data);
151 static void serial_omap_display_reg(struct uart_port *port);
152 static void serial_omap_rx_timeout(unsigned long uart_no);
153 static void serial_omap_start_rxdma(struct uart_omap_port *up);
154 static void serial_omap_set_autorts(struct uart_omap_port *p, int set);
155
156 #define DBG_RX_DATA 0
157
158 int console_detect(char *str)
159 {
160 char *next, *start = NULL;
161 int i;
162
163 i = strlen(CONSOLE_NAME);
164 next = "console=ttyS2,115200";
165
166 while ((next = strchr(next, 'c')) != NULL) {
167 if (!strncmp(next, CONSOLE_NAME, i)) {
168 start = next;
169 break;
170 } else {
171 next++;
172 }
173
174 }
175 if (!start)
176 return -EPERM;
177 i = 0;
178 start = strchr(start, '=') + 1;
179 while (*start != ',') {
180 str[i++] = *start++;
181 if (i > 6) {
182 printk(KERN_ERR "Invalid Console Name\n");
183 return -EPERM;
184 }
185 }
186 str[i] = '\0';
187 return 0;
188 }
189
190 static inline unsigned int serial_in(struct uart_omap_port *up, int offset)
191 {
192 offset <<= up->port.regshift;
193 if (up->pdev->id != 4)
194 return readb(up->port.membase + offset);
195 else
196 return readw(up->port.membase + offset);
197 }
198
199 static inline void serial_out(struct uart_omap_port *up, int offset, int value)
200 {
201 offset <<= up->port.regshift;
202 if (up->pdev->id != 4)
203 writeb(value, up->port.membase + offset);
204 else
205 writew(value, up->port.membase + offset);
206 }
207
208 static inline void serial_omap_clear_fifos(struct uart_omap_port *p)
209 {
210 serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO);
211 serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO |
212 UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
213 serial_out(p, UART_FCR, 0);
214 fcr[p->pdev->id - 1] = 0;
215 }
216
217 /*
218 * We have written our own function to get the divisor so as to support
219 * 13x mode. TBD see if this can be integrated with uart_get_divisor.
220 */
221 static unsigned int
222 serial_omap_get_divisor(struct uart_port *port, unsigned int baud)
223 {
224 unsigned int divisor;
225 if (baud > OMAP_MODE13X_SPEED && baud != 3000000)
226 divisor = 13;
227 else
228 divisor = 16;
229 return port->uartclk/(baud * divisor);
230 }
231
232 static void serial_omap_stop_rxdma(struct uart_omap_port *up)
233 {
234 if (up->uart_dma.rx_dma_state) {
235 del_timer(&up->uart_dma.rx_timer);
236 omap_stop_dma(up->uart_dma.rx_dma_channel);
237 omap_free_dma(up->uart_dma.rx_dma_channel);
238 up->uart_dma.rx_dma_channel = 0xFF;
239 up->uart_dma.rx_dma_state = 0x0;
240 }
241 }
242
243 static void serial_omap_enable_ms(struct uart_port *port)
244 {
245 struct uart_omap_port *up = (struct uart_omap_port *)port;
246
247 DPRINTK("serial_omap_enable_ms+%d\n", up->pdev->id);
248 up->ier |= UART_IER_MSI;
249 serial_out(up, UART_IER, up->ier);
250 }
251
252 static void serial_omap_stop_tx(struct uart_port *port)
253 {
254 struct uart_omap_port *up = (struct uart_omap_port *)port;
255 if (up->use_dma && up->uart_dma.tx_dma_channel != 0xFF) {
256 /*
257 * Check if dma is still active . If yes do nothing,
258 * return. Else stop dma.
259 */
260 int status = omap_readl(OMAP34XX_DMA4_BASE +
261 OMAP_DMA4_CCR(up->uart_dma.tx_dma_channel));
262 if (status & (1 << 7))
263 return;
264 omap_stop_dma(up->uart_dma.tx_dma_channel);
265 omap_free_dma(up->uart_dma.tx_dma_channel);
266 up->uart_dma.tx_dma_channel = 0xFF;
267 }
268
269 if (up->ier & UART_IER_THRI) {
270 up->ier &= ~UART_IER_THRI;
271 serial_out(up, UART_IER, up->ier);
272 }
273 #ifdef CONFIG_PM
274 if (!up->uart_dma.rx_dma_state) {
275 unsigned int tmp;
276 tmp = (serial_in(up, UART_OMAP_SYSC) & 0x7) | (2 << 3);
277 serial_out(up, UART_OMAP_SYSC, tmp); /* smart-idle */
278 }
279 #endif
280 }
281
282 static void serial_omap_stop_rx(struct uart_port *port)
283 {
284 struct uart_omap_port *up = (struct uart_omap_port *)port;
285 serial_omap_stop_rxdma(up);
286 up->ier &= ~UART_IER_RLSI;
287 up->port.read_status_mask &= ~UART_LSR_DR;
288 serial_out(up, UART_IER, up->ier);
289
290 }
291
292 static inline void receive_chars(struct uart_omap_port *up, int *status)
293 {
294 unsigned int ch, flag;
295 int max_count = 256;
296
297 #if DBG_RX_DATA
298 printk("[RX]: ");
299 #endif
300 do {
301 ch = serial_in(up, UART_RX);
302 #if DBG_RX_DATA
303 if ((ch >= 32) && (ch < 127))
304 printk("%c", ch);
305 else
306 printk("{0x%.2x}", ch);
307 #endif
308 flag = TTY_NORMAL;
309 up->port.icount.rx++;
310
311 if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
312 UART_LSR_FE | UART_LSR_OE))) {
313 /*
314 * For statistics only
315 */
316 if (*status & UART_LSR_BI) {
317 *status &= ~(UART_LSR_FE | UART_LSR_PE);
318 up->port.icount.brk++;
319 /*
320 * We do the SysRQ and SAK checking
321 * here because otherwise the break
322 * may get masked by ignore_status_mask
323 * or read_status_mask.
324 */
325 if (uart_handle_break(&up->port))
326 goto ignore_char;
327 } else if (*status & UART_LSR_PE)
328 up->port.icount.parity++;
329 else if (*status & UART_LSR_FE)
330 up->port.icount.frame++;
331 if (*status & UART_LSR_OE)
332 up->port.icount.overrun++;
333
334 /*
335 * Mask off conditions which should be ignored.
336 */
337 *status &= up->port.read_status_mask;
338
339 #ifdef CONFIG_SERIAL_OMAP_CONSOLE
340 if (up->port.line == up->port.cons->index) {
341 /* Recover the break flag from console xmit */
342 *status |= up->lsr_break_flag;
343 up->lsr_break_flag = 0;
344 }
345 #endif
346 if (*status & UART_LSR_BI)
347 flag = TTY_BREAK;
348 else if (*status & UART_LSR_PE)
349 flag = TTY_PARITY;
350 else if (*status & UART_LSR_FE)
351 flag = TTY_FRAME;
352 }
353
354 if (uart_handle_sysrq_char(&up->port, ch))
355 goto ignore_char;
356
357 uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag);
358
359 ignore_char:
360 *status = serial_in(up, UART_LSR);
361 } while ((*status & UART_LSR_DR) && (max_count-- > 0));
362
363 queue_work(omap_serial_workqueue, &up->tty_work);
364
365 #if DBG_RX_DATA
366 printk("\n");
367 #endif
368 }
369
370 static void tty_flip_buffer_work(struct work_struct *work)
371 {
372 struct uart_omap_port *up =
373 container_of(work, struct uart_omap_port, tty_work);
374 struct tty_struct *tty = up->port.state->port.tty;
375
376 tty_flip_buffer_push(tty);
377 }
378
379 static void transmit_chars(struct uart_omap_port *up)
380 {
381 struct circ_buf *xmit = &up->port.state->xmit;
382 int count;
383
384 if (up->port.x_char) {
385 serial_out(up, UART_TX, up->port.x_char);
386 up->port.icount.tx++;
387 up->port.x_char = 0;
388 return;
389 }
390 if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
391 serial_omap_stop_tx(&up->port);
392 return;
393 }
394
395 count = up->port.fifosize / 4;
396
397 do {
398 serial_out(up, UART_TX, xmit->buf[xmit->tail]);
399 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
400 up->port.icount.tx++;
401 if (uart_circ_empty(xmit))
402 break;
403 } while (--count > 0);
404
405 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
406 uart_write_wakeup(&up->port);
407
408 if (uart_circ_empty(xmit))
409 serial_omap_stop_tx(&up->port);
410 }
411
412 static void serial_omap_start_tx(struct uart_port *port)
413 {
414 struct uart_omap_port *up = (struct uart_omap_port *)port;
415 #ifdef CONFIG_PM
416 /* Disallow OCP bus idle. UART TX irqs are not seen during
417 * bus idle. Alternative is to set kernel timer at fifo
418 * drain rate.
419 */
420 unsigned int tmp;
421 tmp = (serial_in(up, UART_OMAP_SYSC) & 0x7) | (1 << 3);
422 serial_out(up, UART_OMAP_SYSC, tmp); /* no-idle */
423 #endif
424
425 if (up->use_dma && !(up->port.x_char)) {
426
427 struct circ_buf *xmit = &up->port.state->xmit;
428 unsigned int start = up->uart_dma.tx_buf_dma_phys +
429 (xmit->tail & (UART_XMIT_SIZE - 1));
430 if (uart_circ_empty(xmit) || up->uart_dma.tx_dma_state)
431 return;
432 spin_lock(&(up->uart_dma.tx_lock));
433 up->uart_dma.tx_dma_state = 1;
434 spin_unlock(&(up->uart_dma.tx_lock));
435
436 up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit);
437 /* It is a circular buffer. See if the buffer has wounded back.
438 * If yes it will have to be transferred in two separate dma
439 * transfers */
440 if (start + up->uart_dma.tx_buf_size >= up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE)
441 up->uart_dma.tx_buf_size = (up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) - start;
442
443 if (up->uart_dma.tx_dma_channel == 0xFF) {
444 omap_request_dma(uart_dma_tx[up->pdev->id-1],
445 "UART Tx DMA",
446 (void *)uart_tx_dma_callback, up,
447 &(up->uart_dma.tx_dma_channel));
448 }
449 omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0,
450 OMAP_DMA_AMODE_CONSTANT,
451 UART_BASE(up->pdev->id - 1), 0, 0);
452 omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0,
453 OMAP_DMA_AMODE_POST_INC, start, 0, 0);
454
455 omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel,
456 OMAP_DMA_DATA_TYPE_S8,
457 up->uart_dma.tx_buf_size, 1,
458 OMAP_DMA_SYNC_ELEMENT,
459 uart_dma_tx[(up->pdev->id)-1], 0);
460
461 omap_start_dma(up->uart_dma.tx_dma_channel);
462
463 } else if (!(up->ier & UART_IER_THRI)) {
464 up->ier |= UART_IER_THRI;
465 serial_out(up, UART_IER, up->ier);
466 }
467
468 if (up->restore_autorts) {
469 serial_omap_set_autorts(up, 1);
470 up->restore_autorts = 0;
471 }
472 }
473
474 static unsigned int check_modem_status(struct uart_omap_port *up)
475 {
476 int status;
477 status = serial_in(up, UART_MSR);
478
479 status |= up->msr_saved_flags;
480 up->msr_saved_flags = 0;
481
482 if ((status & UART_MSR_ANY_DELTA) == 0)
483 return status;
484 if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI &&
485 up->port.state != NULL) {
486 if (status & UART_MSR_TERI)
487 up->port.icount.rng++;
488 if (status & UART_MSR_DDSR)
489 up->port.icount.dsr++;
490 if (status & UART_MSR_DDCD)
491 uart_handle_dcd_change
492 (&up->port, status & UART_MSR_DCD);
493 if (status & UART_MSR_DCTS)
494 uart_handle_cts_change
495 (&up->port, status & UART_MSR_CTS);
496 wake_up_interruptible(&up->port.state->port.delta_msr_wait);
497 }
498
499 return status;
500 }
501
502 /*
503 * This handles the interrupt from one port.
504 */
505 static inline irqreturn_t serial_omap_irq(int irq, void *dev_id)
506 {
507 struct uart_omap_port *up = dev_id;
508 unsigned int iir, lsr;
509
510 iir = serial_in(up, UART_IIR);
511 if (iir & UART_IIR_NO_INT)
512 return IRQ_NONE;
513 lsr = serial_in(up, UART_LSR);
514 if ((iir & 0x4) && up->use_dma) {
515 up->ier &= ~UART_IER_RDI;
516 serial_out(up, UART_IER, up->ier);
517 serial_omap_start_rxdma(up);
518 } else if (lsr & UART_LSR_DR) {
519 receive_chars(up, &lsr);
520 /* XXX: After driver resume optimization, lower this */
521 wake_lock_timeout(&omap_serial_wakelock, (HZ * 1));
522 }
523 check_modem_status(up);
524 if ((lsr & UART_LSR_THRE) && (iir & 0x2))
525 transmit_chars(up);
526 isr8250_activity = jiffies;
527
528 return IRQ_HANDLED;
529 }
530
531 static unsigned int serial_omap_tx_empty(struct uart_port *port)
532 {
533 struct uart_omap_port *up = (struct uart_omap_port *)port;
534 unsigned long flags;
535 unsigned int ret;
536
537 DPRINTK("serial_omap_tx_empty+%d\n", up->pdev->id);
538 spin_lock_irqsave(&up->port.lock, flags);
539 ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
540 spin_unlock_irqrestore(&up->port.lock, flags);
541
542 return ret;
543 }
544
545 static unsigned int serial_omap_get_mctrl(struct uart_port *port)
546 {
547 struct uart_omap_port *up = (struct uart_omap_port *)port;
548 unsigned char status;
549 unsigned int ret;
550
551 status = check_modem_status(up);
552 DPRINTK("serial_omap_get_mctrl+%d\n", up->pdev->id);
553
554 ret = 0;
555 if (status & UART_MSR_DCD)
556 ret |= TIOCM_CAR;
557 if (status & UART_MSR_RI)
558 ret |= TIOCM_RNG;
559 if (status & UART_MSR_DSR)
560 ret |= TIOCM_DSR;
561 if (status & UART_MSR_CTS)
562 ret |= TIOCM_CTS;
563 return ret;
564 }
565
566 static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
567 {
568 struct uart_omap_port *up = (struct uart_omap_port *)port;
569 unsigned char mcr = 0;
570
571 DPRINTK("serial_omap_set_mctrl+%d\n", up->pdev->id);
572 if (mctrl & TIOCM_RTS) {
573 /*
574 * We need to be careful not to cause
575 * RTS to assert when we have a pending
576 * auto-rts restore.
577 */
578 if (!up->restore_autorts)
579 mcr |= UART_MCR_RTS;
580 }
581 if (mctrl & TIOCM_DTR)
582 mcr |= UART_MCR_DTR;
583 if (mctrl & TIOCM_OUT1)
584 mcr |= UART_MCR_OUT1;
585 if (mctrl & TIOCM_OUT2)
586 mcr |= UART_MCR_OUT2;
587 if (mctrl & TIOCM_LOOP)
588 mcr |= UART_MCR_LOOP;
589
590 mcr |= up->mcr;
591 serial_out(up, UART_MCR, mcr);
592 }
593
594 static void serial_omap_break_ctl(struct uart_port *port, int break_state)
595 {
596 struct uart_omap_port *up = (struct uart_omap_port *)port;
597 unsigned long flags;
598
599 DPRINTK("serial_omap_break_ctl+%d\n", up->pdev->id);
600 spin_lock_irqsave(&up->port.lock, flags);
601 if (break_state == -1)
602 up->lcr |= UART_LCR_SBC;
603 else
604 up->lcr &= ~UART_LCR_SBC;
605 serial_out(up, UART_LCR, up->lcr);
606 spin_unlock_irqrestore(&up->port.lock, flags);
607 }
608
609 static void serial_omap_wake_peer(struct uart_port *port)
610 {
611 struct uart_omap_port *up = (struct uart_omap_port *)port;
612 struct plat_serialomap_port *pd = up->pdev->dev.platform_data;
613 if (pd->wake_gpio_strobe) {
614 gpio_direction_output(pd->wake_gpio_strobe, 1);
615 udelay(5);
616 gpio_direction_output(pd->wake_gpio_strobe, 0);
617 udelay(5);
618 }
619 }
620
621 static void serial_omap_set_autorts(struct uart_omap_port *p, int set)
622 {
623 u8 lcr_val = 0, mcr_val = 0, efr_val = 0;
624 u8 lcr_backup = 0, mcr_backup = 0, efr_backup = 0;
625
626 lcr_val = serial_in(p, UART_LCR);
627 lcr_backup = lcr_val;
628 /* Enter Config mode B */
629 serial_out(p, UART_LCR, 0xbf);
630
631 efr_val = serial_in(p, UART_EFR);
632 efr_backup = efr_val;
633
634 /*
635 * Enhanced functions write enable.
636 * Enables writes to IER[7:4], FCR[5:4], MCR[7:5]
637 */
638 serial_out(p, UART_EFR, efr_val | 0x10);
639
640 mcr_val = serial_in(p, UART_MCR);
641 mcr_backup = mcr_val;
642 /* Enable access to TCR_REG and TLR_REG */
643 serial_out(p, UART_MCR, mcr_val | 0x40);
644
645 /* Set RX_FIFO_TRIG levels */
646 serial_out(p, 0x18, 0x0f);
647
648 efr_val = serial_in(p, UART_EFR);
649 if (set)
650 serial_out(p, UART_EFR, efr_val | (1 << 6));
651 else
652 serial_out(p, UART_EFR, efr_val & ~(1 << 6));
653
654
655 mcr_val = serial_in(p, UART_MCR);
656 /* Restore original state of TCR_TLR access */
657 serial_out(p, UART_MCR, (mcr_val & ~0x40) | (mcr_backup & 0x40));
658
659 /* Enhanced function write disable. */
660 serial_out(p, UART_EFR, serial_in(p, UART_EFR) & ~0x10);
661
662 /* Normal operation */
663 serial_out(p, UART_LCR, lcr_backup);
664 }
665
666 static int serial_omap_startup(struct uart_port *port)
667 {
668 struct uart_omap_port *up = (struct uart_omap_port *)port;
669 unsigned long flags;
670 int irq_flags = port->flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0;
671 int retval;
672
673 /* Zoom2 has GPIO_102 connected to Serial device:
674 * Active High
675 */
676
677 if (up->port.flags & UPF_TRIGGER_HIGH)
678 irq_flags |= IRQF_TRIGGER_HIGH;
679
680 if (up->port.flags & UPF_SHARE_IRQ)
681 irq_flags |= IRQF_SHARED;
682
683 /*
684 * Allocate the IRQ
685 */
686 retval = request_irq(up->port.irq, serial_omap_irq, irq_flags,
687 up->name, up);
688 if (retval) {
689 printk(KERN_ERR "%s: Failed to register IRQ %d for %s (%d)\n",
690 __func__, up->port.irq, up->name, retval);
691 return retval;
692 }
693
694
695 /* do not let tty layer execute RX in global workqueue, use a
696 * dedicated workqueue managed by this driver */
697 port->state->port.tty->low_latency = 1;
698
699 /*
700 * Stop the baud clock and disable the UART. UART will be enabled
701 * back in set_termios. This is essential for DMA mode operations.
702 */
703 serial_out(up, UART_LCR, UART_LCR_DLAB);
704 serial_out(up, UART_DLL, 0);
705 serial_out(up, UART_DLM, 0);
706 serial_out(up, UART_LCR, 0);
707 serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_DISABLE);
708
709 /*
710 * Clear the FIFO buffers and disable them.
711 * (they will be reenabled in set_termios())
712 */
713 serial_omap_clear_fifos(up);
714 serial_out(up, UART_SCR, 0x00);
715 /* For Hardware flow control */
716 // serial_out(up, UART_MCR, 0x2);
717
718 /*
719 * Clear the interrupt registers.
720 */
721 (void) serial_in(up, UART_LSR);
722 if (serial_in(up, UART_LSR) & UART_LSR_DR)
723 (void) serial_in(up, UART_RX);
724 (void) serial_in(up, UART_IIR);
725 (void) serial_in(up, UART_MSR);
726 /*
727 * Now, initialize the UART
728 */
729 serial_out(up, UART_LCR, UART_LCR_WLEN8);
730 spin_lock_irqsave(&up->port.lock, flags);
731 if (up->port.flags & UPF_FOURPORT) {
732 if (!is_real_interrupt(up->port.irq))
733 up->port.mctrl |= TIOCM_OUT1;
734 } else {
735 /*
736 * Most PC uarts need OUT2 raised to enable interrupts.
737 */
738 if (is_real_interrupt(up->port.irq))
739 up->port.mctrl |= TIOCM_OUT2;
740 }
741 serial_omap_set_mctrl(&up->port, up->port.mctrl);
742 spin_unlock_irqrestore(&up->port.lock, flags);
743
744 up->msr_saved_flags = 0;
745
746
747
748 if (up->port.flags & UPF_FOURPORT) {
749 unsigned int icp;
750 /*
751 * Enable interrupts on the AST Fourport board
752 */
753 icp = (up->port.iobase & 0xfe0) | 0x01f;
754 outb_p(0x80, icp);
755 (void) inb_p(icp);
756 }
757 if (up->use_dma) {
758 if (!up->is_buf_dma_alloced) {
759 free_page((unsigned long)up->port.state->xmit.buf);
760 up->port.state->xmit.buf = NULL;
761 up->port.state->xmit.buf = dma_alloc_coherent(NULL,
762 UART_XMIT_SIZE,
763 (dma_addr_t *)&(up->uart_dma.tx_buf_dma_phys), 0);
764 up->is_buf_dma_alloced = 1;
765 }
766 init_timer(&(up->uart_dma.rx_timer));
767 up->uart_dma.rx_timer.function = serial_omap_rx_timeout;
768 up->uart_dma.rx_timer.data = up->pdev->id;
769 /* Currently the buffer size is 4KB. Can increase it later*/
770 up->uart_dma.rx_buf = dma_alloc_coherent(NULL,
771 up->uart_dma.rx_buf_size,
772 (dma_addr_t *)&(up->uart_dma.rx_buf_dma_phys), 0);
773 serial_omap_start_rxdma(up);
774 } else {
775 /*
776 * Finally, enable interrupts. Note: Modem status interrupts
777 * are set via set_termios(), which will be occurring imminently
778 * anyway, so we don't enable them here.
779 */
780 up->ier = UART_IER_RLSI | UART_IER_RDI;
781 /*| UART_IER_RTOIE |UART_IER_THRI; */
782 serial_out(up, UART_IER, up->ier);
783 }
784
785 return 0;
786 }
787
788 static void serial_omap_shutdown(struct uart_port *port)
789 {
790 struct uart_omap_port *up = (struct uart_omap_port *)port;
791 unsigned long flags;
792 u8 lcr, efr;
793
794 DPRINTK("serial_omap_shutdown+%d\n", up->pdev->id);
795 /*
796 * Disable interrupts from this port
797 */
798 up->ier = 0;
799 serial_out(up, UART_IER, 0);
800
801 /*
802 * If we're using auto-rts then disable it.
803 */
804 lcr = serial_in(up, UART_LCR);
805 serial_out(up, UART_LCR, 0xbf);
806 efr = serial_in(up, UART_EFR);
807 serial_out(up, UART_LCR, lcr);
808
809 if (efr & UART_EFR_RTS) {
810 serial_omap_set_autorts(up, 0);
811 up->restore_autorts = 1;
812 }
813
814 spin_lock_irqsave(&up->port.lock, flags);
815 if (up->port.flags & UPF_FOURPORT) {
816 /* reset interrupts on the AST Fourport board */
817 inb((up->port.iobase & 0xfe0) | 0x1f);
818 up->port.mctrl |= TIOCM_OUT1;
819 } else
820 up->port.mctrl &= ~TIOCM_OUT2;
821 serial_omap_set_mctrl(&up->port, (up->port.mctrl & ~TIOCM_RTS));
822 spin_unlock_irqrestore(&up->port.lock, flags);
823
824 if (up->pdev->id == gps_port) {
825 serial_out(up, UART_LCR, UART_LCR_DLAB);
826 serial_out(up, UART_DLL, 0);
827 serial_out(up, UART_DLM, 0);
828 serial_out(up, UART_LCR, 0);
829 serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_DISABLE);
830 }
831
832 /*
833 * Disable break condition and FIFOs
834 */
835 serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC);
836 serial_omap_clear_fifos(up);
837
838 /*
839 * Read data port to reset things, and then free the irq
840 */
841 if (serial_in(up, UART_LSR) & UART_LSR_DR)
842 (void) serial_in(up, UART_RX);
843 if (up->use_dma) {
844 int tmp;
845 if (up->is_buf_dma_alloced) {
846 dma_free_coherent(up->port.dev,
847 UART_XMIT_SIZE,
848 up->port.state->xmit.buf,
849 up->uart_dma.tx_buf_dma_phys);
850 up->port.state->xmit.buf = NULL;
851 up->is_buf_dma_alloced = 0;
852 }
853 /*TBD: Check if this is really needed here*/
854 serial_omap_stop_rx(port);
855 dma_free_coherent(up->port.dev,
856 up->uart_dma.rx_buf_size,
857 up->uart_dma.rx_buf, up->uart_dma.rx_buf_dma_phys);
858 up->uart_dma.rx_buf = NULL;
859 tmp = serial_in(up, UART_OMAP_SYSC) & 0x7;
860 serial_out(up, UART_OMAP_SYSC, tmp); /* force-idle */
861 }
862
863 free_irq(up->port.irq, up);
864
865 if (cancel_work_sync(&up->tty_work))
866 tty_flip_buffer_work(&up->tty_work);
867 }
868
869 static void
870 serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
871 struct ktermios *old)
872 {
873 struct uart_omap_port *up = (struct uart_omap_port *)port;
874 unsigned char cval;
875 unsigned char efr = 0;
876 unsigned long flags;
877 unsigned int baud, quot;
878
879 serial_out(up, UART_LCR, UART_LCR_DLAB);
880 serial_out(up, UART_DLL, 0);
881 serial_out(up, UART_DLM, 0);
882 serial_out(up, UART_LCR, 0);
883 serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_DISABLE);
884 switch (termios->c_cflag & CSIZE) {
885 case CS5:
886 cval = UART_LCR_WLEN5;
887 break;
888 case CS6:
889 cval = UART_LCR_WLEN6;
890 break;
891 case CS7:
892 cval = UART_LCR_WLEN7;
893 break;
894 default:
895 case CS8:
896 cval = UART_LCR_WLEN8;
897 break;
898 }
899
900 if (termios->c_cflag & CSTOPB)
901 cval |= UART_LCR_STOP;
902 if (termios->c_cflag & PARENB)
903 cval |= UART_LCR_PARITY;
904 if (!(termios->c_cflag & PARODD))
905 cval |= UART_LCR_EPAR;
906
907 /*
908 * Ask the core to calculate the divisor for us.
909 */
910
911 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/13);
912 quot = serial_omap_get_divisor(port, baud);
913
914 if (up->use_dma)
915 fcr[up->pdev->id - 1] = UART_FCR_ENABLE_FIFO | 0x1 << 6 | 0x1 << 4 | UART_FCR_DMA_SELECT;
916 else
917 fcr[up->pdev->id - 1] = UART_FCR_ENABLE_FIFO;
918
919 /*
920 * Ok, we're now changing the port state. Do it with
921 * interrupts disabled.
922 */
923 spin_lock_irqsave(&up->port.lock, flags);
924
925 /*
926 * Update the per-port timeout.
927 */
928 uart_update_timeout(port, termios->c_cflag, baud);
929
930 up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
931 if (termios->c_iflag & INPCK)
932 up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
933 if (termios->c_iflag & (BRKINT | PARMRK))
934 up->port.read_status_mask |= UART_LSR_BI;
935
936 /*
937 * Characters to ignore
938 */
939 up->port.ignore_status_mask = 0;
940 if (termios->c_iflag & IGNPAR)
941 up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
942 if (termios->c_iflag & IGNBRK) {
943 up->port.ignore_status_mask |= UART_LSR_BI;
944 /*
945 * If we're ignoring parity and break indicators,
946 * ignore overruns too (for real raw support).
947 */
948 if (termios->c_iflag & IGNPAR)
949 up->port.ignore_status_mask |= UART_LSR_OE;
950 }
951
952 /*
953 * ignore all characters if CREAD is not set
954 */
955 if ((termios->c_cflag & CREAD) == 0)
956 up->port.ignore_status_mask |= UART_LSR_DR;
957
958 /*
959 * CTS flow control flag and modem status interrupts
960 */
961 up->ier &= ~UART_IER_MSI;
962 if (UART_ENABLE_MS(&up->port, termios->c_cflag))
963 up->ier |= UART_IER_MSI;
964 serial_out(up, UART_IER, up->ier);
965
966 if (termios->c_cflag & CRTSCTS) {
967 #ifdef CONFIG_SERIAL_OMAP3430_HW_FLOW_CONTROL
968 efr |= ((up->ctsrts & UART_EFR_CTS) |
969 (up->restore_autorts ? 0 : UART_EFR_RTS));
970 #else
971 efr |= (UART_EFR_CTS | (up->restore_autorts ? 0 : UART_EFR_RTS));
972 #endif
973 }
974
975 serial_out(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
976 serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */
977 serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */
978
979 serial_out(up, UART_LCR, cval); /* reset DLAB */
980 up->lcr = cval; /* Save LCR */
981 if (up->use_dma)
982 serial_out(up, UART_OMAP_SCR , ((1 << 6) | (1 << 7)));
983
984 serial_out(up, UART_LCR, 0xbf); /* Access EFR */
985 serial_out(up, UART_EFR, UART_EFR_ECB);
986 serial_out(up, UART_LCR, 0x0); /* Access FCR */
987 serial_out(up, UART_FCR, fcr[up->pdev->id - 1]);
988 serial_out(up, UART_LCR, 0xbf); /* Access EFR */
989 serial_out(up, UART_EFR, efr);
990 serial_out(up, UART_LCR, cval); /* Access FCR */
991
992 serial_omap_set_mctrl(&up->port, up->port.mctrl);
993 /*
994 * Clear all the status registers and RX register before
995 * enabling UART
996 */
997 (void) serial_in(up, UART_LSR);
998 if (serial_in(up, UART_LSR) & UART_LSR_DR)
999 (void) serial_in(up, UART_RX);
1000 (void) serial_in(up, UART_IIR);
1001 (void) serial_in(up, UART_MSR);
1002
1003 if (baud > 230400 && baud != 3000000)
1004 serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE13X);
1005 else
1006 serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE16X);
1007 spin_unlock_irqrestore(&up->port.lock, flags);
1008
1009 DPRINTK("serial_omap_set_termios+%d\n", up->pdev->id);
1010 serial_omap_display_reg(port);
1011 }
1012
1013 static void
1014 serial_omap_pm(struct uart_port *port, unsigned int state,
1015 unsigned int oldstate)
1016 {
1017 struct uart_omap_port *up = (struct uart_omap_port *)port;
1018 unsigned char efr;
1019 DPRINTK("serial_omap_pm+%d\n", up->pdev->id);
1020 efr = serial_in(up, UART_EFR);
1021 serial_out(up, UART_LCR, 0xBF);
1022 serial_out(up, UART_EFR, efr | UART_EFR_ECB);
1023 serial_out(up, UART_LCR, 0);
1024
1025 serial_out(up, UART_IER, (state != 0) ? UART_IERX_SLEEP : 0);
1026 serial_out(up, UART_LCR, 0xBF);
1027 serial_out(up, UART_EFR, efr);
1028 serial_out(up, UART_LCR, 0);
1029 }
1030
1031 static void serial_omap_release_port(struct uart_port *port)
1032 {
1033 DPRINTK("serial_omap_release_port+\n");
1034 }
1035
1036 static int serial_omap_request_port(struct uart_port *port)
1037 {
1038 DPRINTK("serial_omap_request_port+\n");
1039 return 0;
1040 }
1041
1042 static void serial_omap_config_port(struct uart_port *port, int flags)
1043 {
1044 struct uart_omap_port *up = (struct uart_omap_port *)port;
1045
1046 DPRINTK("serial_omap_config_port+%d\n", up->pdev->id);
1047 up->port.type = PORT_OMAP;
1048 }
1049
1050 static int
1051 serial_omap_verify_port(struct uart_port *port, struct serial_struct *ser)
1052 {
1053 /* we don't want the core code to modify any port params */
1054 DPRINTK("serial_omap_verify_port+\n");
1055 return -EINVAL;
1056 }
1057
1058 static const char *
1059 serial_omap_type(struct uart_port *port)
1060 {
1061 struct uart_omap_port *up = (struct uart_omap_port *)port;
1062
1063 DPRINTK("serial_omap_hs_type+%d\n", up->pdev->id);
1064 return up->name;
1065 }
1066
1067 #ifdef CONFIG_SERIAL_OMAP_CONSOLE
1068
1069 static struct uart_omap_port *serial_omap_console_ports[4];
1070
1071 static struct uart_driver serial_omap_reg;
1072
1073 #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
1074
1075 /*
1076 * Wait for transmitter & holding register to empty
1077 */
1078 static inline void wait_for_xmitr(struct uart_omap_port *up)
1079 {
1080 unsigned int status, tmout = 10000;
1081
1082 /* Wait up to 10ms for the character(s) to be sent. */
1083 do {
1084 status = serial_in(up, UART_LSR);
1085
1086 if (status & UART_LSR_BI)
1087 up->lsr_break_flag = UART_LSR_BI;
1088
1089 if (--tmout == 0)
1090 break;
1091 udelay(1);
1092 } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
1093
1094 /* Wait up to 1s for flow control if necessary */
1095 if (up->port.flags & UPF_CONS_FLOW) {
1096 tmout = 1000000;
1097 for (tmout = 1000000; tmout; tmout--) {
1098 unsigned int msr = serial_in(up, UART_MSR);
1099 up->msr_saved_flags |= msr & MSR_SAVE_FLAGS;
1100 if (msr & UART_MSR_CTS)
1101 break;
1102 udelay(1);
1103 }
1104 }
1105 }
1106
1107 static void serial_omap_console_putchar(struct uart_port *port, int ch)
1108 {
1109 struct uart_omap_port *up = (struct uart_omap_port *)port;
1110
1111 wait_for_xmitr(up);
1112 serial_out(up, UART_TX, ch);
1113 }
1114
1115 /*
1116 * Print a string to the serial port trying not to disturb
1117 * any possible real use of the port...
1118 *
1119 * The console_lock must be held when we get here.
1120 */
1121 static void
1122 serial_omap_console_write(struct console *co, const char *s,
1123 unsigned int count)
1124 {
1125 /* TBD: In 8250 interrupts were disabled in the beginning of this
1126 * function and enabled in the end. We might need to do the same*/
1127 struct uart_omap_port *up = serial_omap_console_ports[co->index];
1128 unsigned int ier;
1129
1130 /*
1131 * First save the IER then disable the interrupts
1132 */
1133 ier = serial_in(up, UART_IER);
1134 serial_out(up, UART_IER, 0);
1135
1136 uart_console_write(&up->port, s, count, serial_omap_console_putchar);
1137
1138 /*
1139 * Finally, wait for transmitter to become empty
1140 * and restore the IER
1141 */
1142 wait_for_xmitr(up);
1143 serial_out(up, UART_IER, ier);
1144 /*
1145 * The receive handling will happen properly because the
1146 * receive ready bit will still be set; it is not cleared
1147 * on read. However, modem control will not, we must
1148 * call it if we have saved something in the saved flags
1149 * while processing with interrupts off.
1150 */
1151 if (up->msr_saved_flags)
1152 check_modem_status(up);
1153 }
1154
1155 static int
1156 serial_omap_console_setup(struct console *co, char *options)
1157 {
1158 struct uart_omap_port *up;
1159 int baud = 9600;
1160 int bits = 8;
1161 int parity = 'n';
1162 int flow = 'n';
1163 int r;
1164
1165 if (serial_omap_console_ports[co->index] == NULL)
1166 return -ENODEV;
1167 up = serial_omap_console_ports[co->index];
1168
1169 if (options)
1170 uart_parse_options(options, &baud, &parity, &bits, &flow);
1171
1172 r = uart_set_options(&up->port, co, baud, parity, bits, flow);
1173
1174 return r;
1175 }
1176
1177 static struct tty_driver *my_uart_console_device(struct console *co, int *index)
1178 {
1179 struct uart_driver *p = co->data;
1180 *index = co->index;
1181 return p->tty_driver;
1182 }
1183
1184 static struct console serial_omap_console = {
1185 .name = "ttyS",
1186 .write = serial_omap_console_write,
1187 .device = my_uart_console_device,
1188 .setup = serial_omap_console_setup,
1189 .flags = CON_PRINTBUFFER,
1190 .index = -1,
1191 .data = &serial_omap_reg,
1192 };
1193
1194 static void serial_omap_add_console_port(struct uart_omap_port *up)
1195 {
1196 serial_omap_console_ports[up->pdev->id - 1] = up;
1197 }
1198
1199 #define OMAP_CONSOLE (&serial_omap_console)
1200
1201 #else
1202
1203 #define OMAP_CONSOLE NULL
1204
1205 static inline void serial_omap_add_console_port(struct uart_omap_port *up) {}
1206
1207 #endif
1208
1209 struct uart_ops serial_omap_pops = {
1210 .tx_empty = serial_omap_tx_empty,
1211 .set_mctrl = serial_omap_set_mctrl,
1212 .get_mctrl = serial_omap_get_mctrl,
1213 .stop_tx = serial_omap_stop_tx,
1214 .start_tx = serial_omap_start_tx,
1215 .stop_rx = serial_omap_stop_rx,
1216 .enable_ms = serial_omap_enable_ms,
1217 .break_ctl = serial_omap_break_ctl,
1218 .startup = serial_omap_startup,
1219 .shutdown = serial_omap_shutdown,
1220 .set_termios = serial_omap_set_termios,
1221 .pm = serial_omap_pm,
1222 .type = serial_omap_type,
1223 .release_port = serial_omap_release_port,
1224 .request_port = serial_omap_request_port,
1225 .config_port = serial_omap_config_port,
1226 .verify_port = serial_omap_verify_port,
1227 .wake_peer = serial_omap_wake_peer,
1228 };
1229
1230 static struct uart_driver serial_omap_reg = {
1231 .owner = THIS_MODULE,
1232 .driver_name = "OMAP-HS-SERIAL",
1233 .dev_name = "ttyS",
1234 .major = TTY_MAJOR,
1235 .minor = 128,
1236 .nr = 4,
1237 .cons = OMAP_CONSOLE,
1238 };
1239
1240 static int serial_omap_remove(struct platform_device *dev);
1241 static int serial_omap_suspend(struct platform_device *pdev, pm_message_t state)
1242 {
1243 struct uart_omap_port *up = platform_get_drvdata(pdev);
1244 unsigned int tmp;
1245 u8 lcr, efr;
1246 static unsigned int fifo_suspendbrks;
1247
1248 /* Disable interrupts from this port */
1249 serial_out(up, UART_IER, 0);
1250
1251 /* If we're using auto-rts then disable it. */
1252 lcr = serial_in(up, UART_LCR);
1253 serial_out(up, UART_LCR, 0xbf);
1254 efr = serial_in(up, UART_EFR);
1255 serial_out(up, UART_LCR, lcr);
1256
1257 if (efr & UART_EFR_RTS) {
1258 serial_omap_set_autorts(up, 0);
1259 up->restore_autorts = 1;
1260 /*
1261 * Force RTS output to inactive (high) after disable autorts
1262 * mode. This RTS bit might not be restored when enable autorts
1263 * next time, since the RTS output controlled by hardware
1264 * flow control.
1265 */
1266 serial_omap_set_mctrl(&up->port, (up->port.mctrl & ~TIOCM_RTS));
1267 }
1268
1269 /*
1270 * There seems to be a window here where
1271 * data could still be on the way to the
1272 * fifo. This delay is ~1 byte time @ 115.2k
1273 */
1274 udelay(80);
1275
1276 if (are_driveromap_uarts_active(up->port.line)) {
1277 fifo_suspendbrks++;
1278 printk(KERN_WARNING "UART FIFO break suspend %d\n",
1279 fifo_suspendbrks);
1280
1281 if (up->restore_autorts) {
1282 serial_omap_set_autorts(up, 1);
1283 up->restore_autorts = 0;
1284 }
1285 serial_out(up, UART_IER, up->ier);
1286 return -EBUSY;
1287 }
1288
1289 serial_out(up, UART_IER, up->ier);
1290
1291 if (up)
1292 uart_suspend_port(&serial_omap_reg, &up->port);
1293 if (up->use_dma) {
1294 /*
1295 * Silicon Errata i291 workaround.
1296 * UART Module has to be put in force idle if it is
1297 * configured in DMA mode and when there is no activity
1298 * expected.
1299 */
1300 tmp = (serial_in(up, UART_OMAP_SYSC) & 0x7);
1301 serial_out(up, UART_OMAP_SYSC, tmp); /* force-idle */
1302 }
1303 return 0;
1304 }
1305
1306 static int serial_omap_resume(struct platform_device *dev)
1307 {
1308 struct uart_omap_port *up = platform_get_drvdata(dev);
1309 if (up)
1310 uart_resume_port(&serial_omap_reg, &up->port);
1311
1312 return 0;
1313 }
1314
1315 static void serial_omap_rx_timeout(unsigned long uart_no)
1316 {
1317 struct uart_omap_port *up = ui[uart_no - 1];
1318 unsigned int curr_dma_pos;
1319 curr_dma_pos = omap_readl(OMAP34XX_DMA4_BASE + OMAP_DMA4_CDAC(up->uart_dma.rx_dma_channel));
1320 if ((curr_dma_pos == up->uart_dma.prev_rx_dma_pos) || (curr_dma_pos == 0)) {
1321 /*
1322 * If there is no transfer rx happening for 10sec then stop the dma
1323 * else just restart the timer. See if 10 sec can be improved.
1324 */
1325 if (jiffies_to_msecs(jiffies - isr8250_activity) < 10000)
1326 mod_timer(&up->uart_dma.rx_timer, jiffies +
1327 usecs_to_jiffies(up->uart_dma.rx_timeout));
1328 else {
1329 del_timer(&up->uart_dma.rx_timer);
1330 serial_omap_stop_rxdma(up);
1331 up->ier |= UART_IER_RDI;
1332 serial_out(up, UART_IER, up->ier);
1333 }
1334
1335 return;
1336 } else {
1337 unsigned int curr_transmitted_size = curr_dma_pos - up->uart_dma.prev_rx_dma_pos;
1338 up->port.icount.rx += curr_transmitted_size;
1339 tty_insert_flip_string(up->port.state->port.tty, up->uart_dma.rx_buf + (up->uart_dma.prev_rx_dma_pos - up->uart_dma.rx_buf_dma_phys), curr_transmitted_size);
1340 queue_work(omap_serial_workqueue, &up->tty_work);
1341 up->uart_dma.prev_rx_dma_pos = curr_dma_pos;
1342 if (up->uart_dma.rx_buf_size + up->uart_dma.rx_buf_dma_phys == curr_dma_pos) {
1343 serial_omap_start_rxdma(up);
1344 } else
1345 mod_timer(&up->uart_dma.rx_timer,
1346 jiffies + usecs_to_jiffies(up->uart_dma.rx_timeout));
1347 isr8250_activity = jiffies;
1348 }
1349 }
1350
1351 static void uart_rx_dma_callback(int lch, u16 ch_status, void *data)
1352 {
1353 return;
1354 }
1355
1356 static void serial_omap_start_rxdma(struct uart_omap_port *up)
1357 {
1358 #ifdef CONFIG_PM
1359 /* Disallow OCP bus idle. UART TX irqs are not seen during
1360 * bus idle. Alternative is to set kernel timer at fifo
1361 * drain rate.
1362 */
1363 unsigned int tmp;
1364 tmp = (serial_in(up, UART_OMAP_SYSC) & 0x7) | (1 << 3);
1365 serial_out(up, UART_OMAP_SYSC, tmp); /* no-idle */
1366 #endif
1367 if (up->uart_dma.rx_dma_channel == 0xFF) {
1368 omap_request_dma(uart_dma_rx[up->pdev->id-1], "UART Rx DMA",
1369 (void *)uart_rx_dma_callback, up,
1370 &(up->uart_dma.rx_dma_channel));
1371 omap_set_dma_src_params(up->uart_dma.rx_dma_channel, 0,
1372 OMAP_DMA_AMODE_CONSTANT,
1373 UART_BASE(up->pdev->id - 1), 0, 0);
1374 omap_set_dma_dest_params(up->uart_dma.rx_dma_channel, 0,
1375 OMAP_DMA_AMODE_POST_INC,
1376 up->uart_dma.rx_buf_dma_phys, 0, 0);
1377 omap_set_dma_transfer_params(up->uart_dma.rx_dma_channel,
1378 OMAP_DMA_DATA_TYPE_S8,
1379 up->uart_dma.rx_buf_size, 1,
1380 OMAP_DMA_SYNC_ELEMENT,
1381 uart_dma_rx[up->pdev->id-1], 0);
1382 }
1383 up->uart_dma.prev_rx_dma_pos = up->uart_dma.rx_buf_dma_phys;
1384 omap_writel(0, OMAP34XX_DMA4_BASE +
1385 OMAP_DMA4_CDAC(up->uart_dma.rx_dma_channel));
1386 omap_start_dma(up->uart_dma.rx_dma_channel);
1387 mod_timer(&up->uart_dma.rx_timer, jiffies +
1388 usecs_to_jiffies(up->uart_dma.rx_timeout));
1389 up->uart_dma.rx_dma_state = 1;
1390 }
1391
1392 static void serial_omap_continue_tx(struct uart_omap_port *up)
1393 {
1394 struct circ_buf *xmit = &up->port.state->xmit;
1395 int start = up->uart_dma.tx_buf_dma_phys + (xmit->tail & (UART_XMIT_SIZE - 1));
1396 if (uart_circ_empty(xmit))
1397 return;
1398
1399 up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit);
1400 /* It is a circular buffer. See if the buffer has wounded back.
1401 * If yes it will have to be transferred in two separate dma
1402 * transfers
1403 */
1404 if (start + up->uart_dma.tx_buf_size >=
1405 up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE)
1406 up->uart_dma.tx_buf_size =
1407 (up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) - start;
1408 omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0,
1409 OMAP_DMA_AMODE_CONSTANT,
1410 UART_BASE(up->pdev->id - 1), 0, 0);
1411 omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0,
1412 OMAP_DMA_AMODE_POST_INC, start, 0, 0);
1413
1414 omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel,
1415 OMAP_DMA_DATA_TYPE_S8,
1416 up->uart_dma.tx_buf_size, 1,
1417 OMAP_DMA_SYNC_ELEMENT,
1418 uart_dma_tx[(up->pdev->id)-1], 0);
1419
1420 omap_start_dma(up->uart_dma.tx_dma_channel);
1421 }
1422
1423 static void uart_tx_dma_callback(int lch, u16 ch_status, void *data)
1424 {
1425 struct uart_omap_port *up = (struct uart_omap_port *)data;
1426 struct circ_buf *xmit = &up->port.state->xmit;
1427 xmit->tail = (xmit->tail + up->uart_dma.tx_buf_size) & (UART_XMIT_SIZE - 1);
1428 up->port.icount.tx += up->uart_dma.tx_buf_size;
1429
1430 /* Revisit: Not sure about the below two steps. Seen some instabilities
1431 * with them. might not be needed in the DMA path
1432 */
1433 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
1434 uart_write_wakeup(&up->port);
1435
1436 if (uart_circ_empty(xmit)) {
1437
1438 spin_lock(&(up->uart_dma.tx_lock));
1439 serial_omap_stop_tx(&up->port);
1440 up->uart_dma.tx_dma_state = 0;
1441 spin_unlock(&(up->uart_dma.tx_lock));
1442 } else {
1443 omap_stop_dma(up->uart_dma.tx_dma_channel);
1444 serial_omap_continue_tx(up);
1445 }
1446 isr8250_activity = jiffies;
1447
1448 return;
1449 }
1450
1451 static int serial_omap_probe(struct platform_device *pdev)
1452 {
1453 struct plat_serialomap_port *pdata = pdev->dev.platform_data;
1454 struct uart_omap_port *up;
1455 struct resource *mem, *irq;
1456 int ret = -ENOSPC;
1457 #if 0
1458 char str[7];
1459 #endif
1460
1461 if (!pdata) {
1462 dev_err(&pdev->dev, "no platform data?\n");
1463 return -ENODEV;
1464 }
1465
1466 if (pdata->disabled) {
1467 dev_err(&pdev->dev, "device disabled\n");
1468 return -ENODEV;
1469 }
1470
1471 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1472 if (!mem) {
1473 dev_err(&pdev->dev, "no mem resource?\n");
1474 return -ENODEV;
1475 }
1476 irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
1477 if (!irq) {
1478 dev_err(&pdev->dev, "no irq resource?\n");
1479 return -ENODEV;
1480 }
1481
1482 ret = (int) request_mem_region(mem->start, (mem->end - mem->start) + 1,
1483 pdev->dev.driver->name);
1484 if (!ret) {
1485 dev_err(&pdev->dev, "memory region already claimed\n");
1486 return -EBUSY;
1487 }
1488 up = kzalloc(sizeof(*up), GFP_KERNEL);
1489 if (up == NULL) {
1490 ret = -ENOMEM;
1491 goto do_release_region;
1492 }
1493 sprintf(up->name, "OMAP HS UART%d", pdev->id);
1494
1495 up->pdev = pdev;
1496 up->port.dev = &pdev->dev;
1497 up->port.type = PORT_OMAP;
1498 up->port.iotype = UPIO_MEM;
1499 up->port.mapbase = mem->start;
1500 up->port.irq = irq->start;
1501 up->port.fifosize = 64;
1502 up->port.ops = &serial_omap_pops;
1503 up->port.line = pdev->id - 1;
1504 #define QUART_CLK (1843200)
1505 if (pdev->id == 4) {
1506 up->port.membase = ioremap_nocache(mem->start, 0x16 << 1);
1507 up->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP |
1508 UPF_SHARE_IRQ | UPF_TRIGGER_HIGH;
1509 up->port.uartclk = QUART_CLK;
1510 up->port.regshift = 1;
1511 } else {
1512 up->port.membase = (void *) OMAP2_L4_IO_ADDRESS(mem->start);
1513 up->port.flags = pdata->flags;
1514 up->port.uartclk = 48000000;
1515 up->port.regshift = 2;
1516 #ifdef CONFIG_SERIAL_OMAP3430_HW_FLOW_CONTROL
1517 up->ctsrts = pdata->ctsrts;
1518 #endif
1519 }
1520
1521
1522 if (pdev->id == (UART1+1)) {
1523 #ifdef CONFIG_SERIAL_OMAP_DMA_UART1
1524 up->use_dma = 1;
1525 up->uart_dma.rx_buf_size =
1526 CONFIG_SERIAL_OMAP_UART1_RXDMA_BUFSIZE;
1527 up->uart_dma.rx_timeout =
1528 CONFIG_SERIAL_OMAP_UART1_RXDMA_TIMEOUT;
1529 #endif
1530 } else if (pdev->id == (UART2+1)) {
1531 #ifdef CONFIG_SERIAL_OMAP_DMA_UART2
1532 up->use_dma = 1;
1533 up->uart_dma.rx_buf_size =
1534 CONFIG_SERIAL_OMAP_UART2_RXDMA_BUFSIZE;
1535 up->uart_dma.rx_timeout =
1536 CONFIG_SERIAL_OMAP_UART2_RXDMA_TIMEOUT;
1537 #endif
1538 } else if (pdev->id == (UART3+1)) {
1539 #ifdef CONFIG_SERIAL_OMAP_DMA_UART3
1540 up->use_dma = 1;
1541 up->uart_dma.rx_buf_size =
1542 CONFIG_SERIAL_OMAP_UART3_RXDMA_BUFSIZE;
1543 up->uart_dma.rx_timeout =
1544 CONFIG_SERIAL_OMAP_UART3_RXDMA_TIMEOUT;
1545 #endif
1546 }
1547
1548 if (up->use_dma) {
1549 spin_lock_init(&(up->uart_dma.tx_lock));
1550 spin_lock_init(&(up->uart_dma.rx_lock));
1551 up->uart_dma.tx_dma_channel = 0xFF;
1552 up->uart_dma.rx_dma_channel = 0xFF;
1553 }
1554 #if 0
1555 if (console_detect(str))
1556 printk("Invalid console paramter. UART Library Init Failed!\n");
1557 #endif
1558 up->use_console = 0;
1559 fcr[pdev->id - 1] = 0;
1560 #if 0
1561 if (!strcmp(str, "ttyS0"))
1562 up->use_console = 1;
1563 else if (!strcmp(str, "ttyS1"))
1564 up->use_console = 1;
1565 else if (!strcmp(str, "ttyS2"))
1566 up->use_console = 1;
1567 else if (!strcmp(str, "ttyS3"))
1568 up->use_console = 1;
1569 else
1570 printk(KERN_INFO
1571 "!!!!!!!! Unable to recongnize Console UART........\n");
1572 #endif
1573 up->use_console = 1;
1574 ui[pdev->id - 1] = up;
1575 serial_omap_add_console_port(up);
1576 serial_omap_clear_fifos(up);
1577
1578 ret = uart_add_one_port(&serial_omap_reg, &up->port);
1579 if (ret != 0)
1580 goto do_release_region;
1581 platform_set_drvdata(pdev, up);
1582
1583 if (pdata->wake_gpio_strobe) {
1584 if (gpio_request(pdata->wake_gpio_strobe,
1585 "UART AP -> BP wakeup strobe")) {
1586 printk(KERN_ERR "Error requesting GPIO\n");
1587 } else
1588 gpio_direction_output(pdata->wake_gpio_strobe, 0);
1589 }
1590
1591 INIT_WORK(&up->tty_work, tty_flip_buffer_work);
1592
1593 return 0;
1594 do_release_region:
1595 release_mem_region(mem->start, (mem->end - mem->start) + 1);
1596 return ret;
1597 }
1598
1599 static int serial_omap_remove(struct platform_device *dev)
1600 {
1601 struct uart_omap_port *up = platform_get_drvdata(dev);
1602
1603 platform_set_drvdata(dev, NULL);
1604 if (up) {
1605 uart_remove_one_port(&serial_omap_reg, &up->port);
1606 kfree(up);
1607 }
1608 return 0;
1609 }
1610
1611 static struct platform_driver serial_omap_driver = {
1612 .probe = serial_omap_probe,
1613 .remove = serial_omap_remove,
1614
1615 .suspend = serial_omap_suspend,
1616 .resume = serial_omap_resume,
1617 .driver = {
1618 .name = "omap-hs-uart",
1619 },
1620 };
1621
1622 int my_serial_omap_init(void)
1623 {
1624 int ret;
1625
1626 printk(KERN_INFO "registering omap-hs-uart...\n");
1627 wake_lock_init(&omap_serial_wakelock, WAKE_LOCK_SUSPEND,
1628 "omap_hs_serial");
1629 omap_serial_workqueue = create_singlethread_workqueue("omap_hs_serial");
1630 ret = uart_register_driver(&serial_omap_reg);
1631 if (ret != 0)
1632 return ret;
1633 ret = platform_driver_register(&serial_omap_driver);
1634 if (ret != 0)
1635 uart_unregister_driver(&serial_omap_reg);
1636 return ret;
1637 }
1638
1639 void serial_omap_exit(void)
1640 {
1641 wake_lock_destroy(&omap_serial_wakelock);
1642 destroy_workqueue(omap_serial_workqueue);
1643 platform_driver_unregister(&serial_omap_driver);
1644 uart_unregister_driver(&serial_omap_reg);
1645 }
1646
1647 #if defined(CONFIG_OMAP3_PM)
1648 int omap24xx_uart_cts_wakeup(int uart_no, int state)
1649 {
1650 u32 *ptr;
1651 unsigned char lcr, efr;
1652 struct uart_omap_port *up = ui[uart_no];
1653
1654 if (unlikely(uart_no < 0 || uart_no > MAX_UARTS)) {
1655 printk(KERN_INFO "Bad uart id %d \n", uart_no);
1656 return -EPERM;
1657 }
1658
1659 if (state) {
1660 /*
1661 * Enable the CTS for io pad wakeup
1662 */
1663 switch (uart_no) {
1664 case UART1:
1665 ptr = (u32 *) (&CONTROL_PADCONF_UART1_CTS);
1666 break;
1667 case UART2:
1668 ptr = (u32 *) (&CONTROL_PADCONF_UART2_CTS);
1669 break;
1670 default:
1671 printk(KERN_ERR
1672 "Wakeup on Uart%d is not supported\n", uart_no);
1673 return -EPERM;
1674 }
1675 *ptr |= (u32)((IO_PAD_WAKEUPENABLE | IO_PAD_OFFPULLUDENABLE |
1676 IO_PAD_OFFOUTENABLE | IO_PAD_OFFENABLE |
1677 IO_PAD_INPUTENABLE | IO_PAD_PULLUDENABLE|
1678 IO_PAD_MUXMODE0)
1679 );
1680 /*
1681 * Enable the CTS for module level wakeup
1682 */
1683 lcr = serial_in(up, UART_LCR);
1684 serial_out(up, UART_LCR, 0xbf);
1685 efr = serial_in(up, UART_EFR);
1686 serial_out(up, UART_EFR, efr | UART_EFR_ECB);
1687 serial_out(up, UART_LCR, lcr);
1688 up->ier |= (1 << 7);
1689 serial_out(up, UART_IER, up->ier);
1690 serial_out(up, UART_OMAP_WER,
1691 serial_in(up, UART_OMAP_WER) | 0x1);
1692 serial_out(up, UART_LCR, 0xbf);
1693 serial_out(up, UART_EFR, efr);
1694 serial_out(up, UART_LCR, lcr);
1695
1696 } else {
1697 /*
1698 * Disable the CTS capability for io pad wakeup
1699 */
1700 switch (uart_no) {
1701 case UART1:
1702 ptr = (u32 *) (&CONTROL_PADCONF_UART1_CTS);
1703 break;
1704 case UART2:
1705 ptr = (u32 *) (&CONTROL_PADCONF_UART2_CTS);
1706 break;
1707 default:
1708 printk(KERN_ERR
1709 "Wakeup on Uart%d is not supported\n", uart_no);
1710 return -EPERM;
1711 }
1712 *ptr &= (u32) (~(IO_PAD_WAKEUPENABLE | IO_PAD_OFFPULLUDENABLE |
1713 IO_PAD_OFFOUTENABLE | IO_PAD_OFFENABLE |
1714 IO_PAD_INPUTENABLE | IO_PAD_PULLUDENABLE));
1715 *ptr |= IO_PAD_MUXMODE7;
1716
1717 /*
1718 * Disable the CTS for module level wakeup
1719 */
1720 lcr = serial_in(up, UART_LCR);
1721 serial_out(up, UART_LCR, 0xbf);
1722 efr = serial_in(up, UART_EFR);
1723 serial_out(up, UART_EFR, efr | UART_EFR_ECB);
1724 serial_out(up, UART_LCR, lcr);
1725 up->ier &= ~(1 << 7);
1726 serial_out(up, UART_IER, up->ier);
1727 /* TBD:Do we really want to disable module wake up for this in WER*/
1728 serial_out(up, UART_LCR, 0xbf);
1729 serial_out(up, UART_EFR, efr);
1730 serial_out(up, UART_LCR, lcr);
1731 }
1732 return 0;
1733 }
1734 EXPORT_SYMBOL(omap24xx_uart_cts_wakeup);
1735 #endif
1736
1737 #ifdef CONFIG_PM
1738 #if 0
1739 /**
1740 * are_driver8250_uarts_active() - Check if any ports managed by this
1741 * driver are currently busy. This should be called with interrupts
1742 * disabled.
1743 */
1744 int are_driveromap_uarts_active(int num)
1745 {
1746 struct circ_buf *xmit;
1747 unsigned int status;
1748 struct uart_omap_port *up = ui[num];
1749
1750 if (!up)
1751 return 0;
1752
1753 /* check ownership of port */
1754 /* Check only ports managed by this driver and open */
1755 if ((up->port.dev == NULL) || (up->port.type == PORT_UNKNOWN))
1756 return 0;
1757
1758 /* driver owns this port but it's closed */
1759 if (up->port.state == NULL)
1760 return 0;
1761
1762 /* check for any current pending activity */
1763 /* Any queued work in ring buffer which can be handled still? */
1764 xmit = &up->port.state->xmit;
1765 if (!(uart_circ_empty(xmit) || uart_tx_stopped(&up->port)))
1766 return 1;
1767 status = serial_in(up, UART_LSR);
1768
1769 /* TX hardware not empty */
1770 if (!(status & (UART_LSR_TEMT | UART_LSR_THRE)))
1771 return 1;
1772
1773 /* Any rx activity? */
1774 if (status & UART_LSR_DR)
1775 return 1;
1776
1777 if (up->use_dma) {
1778 /*
1779 * Silicon Errata i291 workaround.
1780 * UART Module has to be put in force idle if it is
1781 * configured in DMA mode and when there is no activity
1782 * expected.
1783 */
1784 unsigned int tmp;
1785 del_timer(&up->uart_dma.rx_timer);
1786 serial_omap_stop_rxdma(up);
1787 up->ier |= UART_IER_RDI;
1788 serial_out(up, UART_IER, up->ier);
1789 tmp = (serial_in(up, UART_OMAP_SYSC) & 0x7);
1790 serial_out(up, UART_OMAP_SYSC, tmp); /* force-idle */
1791 }
1792
1793 return 0;
1794 }
1795 EXPORT_SYMBOL(are_driveromap_uarts_active);
1796
1797 #endif
1798 #endif
1799
1800 static void serial_omap_display_reg(struct uart_port *port)
1801 {
1802 struct uart_omap_port *up = (struct uart_omap_port *)port;
1803 unsigned int lcr, efr, mcr, dll, dlh, xon1, xon2, xoff1, xoff2;
1804 unsigned int tcr, tlr, uasr;
1805 DPRINTK("Register dump for UART%d\n", up->pdev->id);
1806 DPRINTK("IER_REG=0x%x\n", serial_in(up, UART_IER));
1807 DPRINTK("IIR_REG=0x%x\n", serial_in(up, UART_IIR));
1808 lcr = serial_in(up, UART_LCR);
1809 DPRINTK("LCR_REG=0x%x\n", lcr);
1810 mcr = serial_in(up, UART_MCR);
1811 DPRINTK("MCR_REG=0x%x\n", mcr);
1812 DPRINTK("LSR_REG=0x%x\n", serial_in(up, UART_LSR));
1813 DPRINTK("MSR_REG=0x%x\n", serial_in(up, UART_MSR));
1814 DPRINTK("SPR_REG=0x%x\n", serial_in(up, UART_OMAP_SPR));
1815 DPRINTK("MDR1_REG=0x%x\n", serial_in(up, UART_OMAP_MDR1));
1816 DPRINTK("MDR2_REG=0x%x\n", serial_in(up, UART_OMAP_MDR2));
1817 DPRINTK("SCR_REG=0x%x\n", serial_in(up, UART_OMAP_SCR));
1818 DPRINTK("SSR_REG=0x%x\n", serial_in(up, UART_OMAP_SSR));
1819 DPRINTK("MVR_REG=0x%x\n", serial_in(up, UART_OMAP_MVER));
1820 DPRINTK("SYSC_REG=0x%x\n", serial_in(up, UART_OMAP_SYSC));
1821 DPRINTK("SYSS_REG=0x%x\n", serial_in(up, UART_OMAP_SYSS));
1822 DPRINTK("WER_REG=0x%x\n", serial_in(up, UART_OMAP_WER));
1823
1824 serial_out(up, UART_LCR, 0xBF);
1825 dll = serial_in(up, UART_DLL);
1826 dlh = serial_in(up, UART_DLM);
1827 efr = serial_in(up, UART_EFR);
1828 xon1 = serial_in(up, UART_XON1);
1829 xon2 = serial_in(up, UART_XON2);
1830
1831 serial_out(up, UART_EFR, efr | UART_EFR_ECB);
1832 serial_out(up, UART_LCR, lcr);
1833 serial_out(up, UART_MCR, mcr | UART_MCR_TCRTLR);
1834 serial_out(up, UART_LCR, 0xBF);
1835
1836 tcr = serial_in(up, UART_TI752_TCR);
1837 tlr = serial_in(up, UART_TI752_TLR);
1838
1839 serial_out(up, UART_LCR, lcr);
1840 serial_out(up, UART_MCR, mcr);
1841 serial_out(up, UART_LCR, 0xBF);
1842
1843 xoff1 = serial_in(up, UART_XOFF1);
1844 xoff2 = serial_in(up, UART_XOFF2);
1845 uasr = serial_in(up, UART_OMAP_UASR);
1846
1847 serial_out(up, UART_EFR, efr);
1848 serial_out(up, UART_LCR, lcr);
1849
1850
1851 DPRINTK("DLL_REG=0x%x\n", dll);
1852 DPRINTK("DLH_REG=0x%x\n", dlh);
1853 DPRINTK("EFR_REG=0x%x\n", efr);
1854
1855 DPRINTK("XON1_ADDR_REG=0x%x\n", xon1);
1856 DPRINTK("XON2_ADDR_REG=0x%x\n", xon2);
1857 DPRINTK("TCR_REG=0x%x\n", tcr);
1858 DPRINTK("TLR_REG=0x%x\n", tlr);
1859
1860
1861 DPRINTK("XOFF1_REG=0x%x\n", xoff1);
1862 DPRINTK("XOFF2_REG=0x%x\n", xoff2);
1863 DPRINTK("UASR_REG=0x%x\n", uasr);
1864
1865 }
kexec for Motorola Milestone 2
Impressum, Datenschutz