git.zerfleddert.de Git - rsbs2/blob - rsbs2.pl

   1 #!/usr/bin/perl -w
   2
   3 use LWP::UserAgent;
   4 use XML::Simple;
   5 use Data::Dumper;
   6 use MIME::Base64;
   7 use Digest::MD5 qw(md5);
   8
   9 my $ua = LWP::UserAgent->new;
  10 my $sid;
  11 my $host;
  12 my $poweronms=200;
  13 my $poweroffms=5000;
  14 my $verbose = 0;
  15
  16 my @fw_vars = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX GATEWAY
  17         IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE ENABLE_DHCP
  18         ENABLE_DNS DNS_SERVER DNS_DOMAIN_NAME
  19         ACCESS_CONTROL_SERVER_1 ACCESS_CONTROL_SERVER_2 ACCESS_CONTROL_SERVERS
  20         ACPI_DISABLE_BIOS_SCAN ACPI_FORCE_RSDP_ADDRESS ACPI_FORCE_RSDT_ADDRESS
  21         ACPI_RSDP_BIOS_ROM_ADDRESS ACPI_SCAN_DELAY_SECONDS AMR_AUTH_METHOD
  22         AMR_DISABLE_PCI AMR_ENABLE_ISCSI_TIMEOUT AMR_ENABLED AMR_HOST_INTERFACE
  23         AMR_SERVER_LIST AMR_USB_FDD_CBI_UFI_TRANSPORT AMR_USB_R2T_TIMEOUT_MSEC
  24         AVR_4BIT_ACTION AVR_4BIT_SAMPLE_TIME AVR_ARCHITECTURE AVR_CHIP_TYPE
  25         AVR_CLIENT_LANGUAGE AVR_DISABLE_SVR_MOUSE_ON_SESSION_START
  26         AVR_KB_VERSION AVR_MAX_SESSION_COUNT AVR_MOUSE_ACCELERATION
  27         AVR_MOUSE_MAX_STEP_SIZE AVR_NUMB_MOUSE_PACKETS
  28         AVR_PCI_PATTERN_HANDS_OFF_ENABLED AVR_PREF_KB_STICKY_KEY_MODE_ON
  29         AVR_PREF_KB_TYPING_MODE_ON AVR_PREF_KB_WARN_UNID_EV
  30         AVR_REGISTERS_BASE_ADDR AVR_RESET_PAUSE AVR_SCREEN_REFRESH
  31         AVR_SUPPORTED_CHIP AVR_TILE_TIMEOUT AVR_VIDEO_MEM_BASE_ADDR BAUDRATE
  32         BAUDRATE_MODEM BAUDRATE_PPP BMC_SUPPORTS_GRACEFULL
  33         BMC_TIMESYNC_INTERVAL CARD_NAME CONSOLE_IPMI_MOUSE_BYTE_TIME
  34         CONSOLE_KEYBOARD_ACCESS_MODE CONSOLE_MOUSE_ACCESS_MODE
  35         CONSOLE_VIDEO_PARAM_MODE CONTACT CONTACT_PHONE CRIT_TEMP_SHUTDOWN
  36         CRIT_VOLT_SHUTDOWN DHCP_ADD_EXTENSION DHCP_ADD_SERIAL
  37         DHCP_CONFIGURE_DNS DHCP_HOSTNAME_EXT DHCP_SERVER DHCP_USE_CARDNAME
  38         DIAG_URL ENABLE_ANON_IPMI ENABLE_ANON_PCI
  39         ENABLE_ANON_WEB ENABLE_AVR_CHIP_DETECT ENABLE_BMC_AUTODETECT
  40         ENABLE_BMC_TIMESYNC ENABLE_CRTC_FETCH ENABLE_DHCP ENABLE_DHCP_HOSTNAME
  41         ENABLE_DS_CONNECTIVITY ENABLE_IO_UART_DECODER ENABLE_LAN_100
  42         ENABLE_LAN_AUTONEG ENABLE_LAN_FDUPLEX ENABLE_MEM_UART_DECODER
  43         ENABLE_PPP ENABLE_REMOTE_FLOPPY_BOOT ENABLE_SELF_DELETE
  44         ENABLE_SERIAL_DBG ETHDRIVER_SID EXPROM_BANNER EXPROM_EBDA_COMPATIBILITY
  45         EXPROM_ENTRY EXPROM_EXIT_DELAY_SEC EXPROM_F3_DELAY_SEC
  46         EXPROM_INT13_COMPATIBILITY EXPROM_SETUP_BANNER FIRMWARE_REVISION
  47         FP_ACDC FP_AMR FP_AVR_ASR FP_AVR_GRAPHIC_CONSOLE FP_AVR_TEXT_CONSOLE
  48         FP_AVRMANCONF_4BIT_SAMPLE FP_AVRMANCONF_ACCESS_MODES FP_AVRMANCONF_CHIP
  49         FP_AVRMANCONF_MOUSE_ACCELERATION FP_AVRMANCONF_MOUSE_TYPE
  50         FP_AVRMANCONF_RESET_PAUSE FP_AVRMANCONF_SCREEN_REFRESH FP_BATTERY
  51         FP_BOARDRESET_BUTTON FP_COMREDIRECT FP_F3_PPP FP_I2C FP_ICMB FP_INSTR
  52         FP_INTERNAL_LAN FP_KEY_CONSOLE FP_LAN_SPEED
  53         FP_LAST_BOARD_POWER_WARNING_ENABLED FP_NO_BLADE_PANEL
  54         FP_NO_CARDCONF_PANEL FP_NO_DIAG_PANEL FP_NO_DSAUTHCONF_PANEL
  55         FP_NO_MANAGE_PANEL FP_NO_MEMORY_PANEL FP_NO_SENSOR_PANEL
  56         FP_NO_SERVERCONF_PANEL FP_NO_SSL_PANEL FP_NO_SYSLOG_PANEL
  57         FP_NO_USERCONF_PANEL FP_PAGING_EMAIL FP_PAGING_SERIAL FP_PAGING_SNMP
  58         FP_PCI_CONFIG FP_PPP FP_PROP_BAUDRATE_REQBOOT FP_PROP_PPP_INIT_REQBOOT
  59         FP_PROP_PS_REQBOOT FP_PROP_TERM_DIRECT_CONNECT_REQBOOT FP_REMOTE_BOOT
  60         FP_REMOTE_DISK FP_REMOTE_POWER FP_SAC_CONSOLE FP_SEL FP_SENSOR_HISTORY
  61         FP_SEQ_SEL FP_SERVER_POWER FP_SERVER_REBOOT FP_SERVER_RESET
  62         FP_SERVER_SHUTDOWN FP_SMM FP_SSL FP_STATUS_DIAG_PANEL
  63         FP_STATUS_MEMORY_PANEL FP_STATUS_PCI_CONFIG FP_STATUS_SAC_CONSOLE
  64         FP_SYSTEM_LAN FP_TEXT_ASR FP_TEXT_CONSOLE FP_TUI FP_VERSION FP_VGA_ASR
  65         FP_VGA_CONSOLE FP_VT100_CONSOLE GATEWAY GATEWAY_MAC
  66         GRATUITOUS_ARP_INTERVAL HELP_LOCATION HIST0_SAMPLE_TIME HIST0_SENSOR_ID
  67         HIST1_SAMPLE_TIME HIST1_SENSOR_ID HIST2_SAMPLE_TIME HIST2_SENSOR_ID
  68         HIST3_SAMPLE_TIME HIST3_SENSOR_ID HTTP_PORT_NUM HTTP_SSL_PORT_NUM
  69         I2C_ADDR_8BIT_CHASSIS_BMC I2C_ADDR_8BIT_MY_BMC I2C_ADDR_8BIT_THIS_CARD
  70         INFOTXT_BPROP_ACCESS INFOTXT_DB_ACCESS IP_ADDRESS IP_ADDRESS_SOURCE
  71         IPMB_RETRY_TIMEOUT IPMB_SEQ_NUM_TIMEOUT IPMB_TX_RETRIES
  72         IPMI_COUNTRY_SELECT IPV4_HEADER_PARAMETERS ISCSI_DEVICE_VENDOR
  73         ISCSI_PRODUCT_EMUL_BD ISCSI_PRODUCT_EMUL_CD ISCSI_PRODUCT_EMUL_FD
  74         LAST_CARD_NAME LAST_ENABLE_DHCP LAST_GATEWAY LAST_IP_ADDRESS
  75         LAST_NETMASK LOCATION MAC_ADDRESS MODEM_CONNECT MODEM_CONNECT2
  76         MODEM_SEPARATOR NETMASK PAGE_RETRIES PAGE_RETRY_DELAY_SEC POST_ERRCODE
  77         POST_PROP PPP_AVAILABLE PPP_INIT PPP_IP_ADDR PPP_NETMASK PPP_PORT
  78         PPP_STATUS PPP_STAY_ALIVE_SECS PPP_WELCOME PPP2_BAUDRATE PPP2_INIT
  79         PPP2_IP_ADDR PPP2_NETMASK PPP2_PORT PPP2_STAY_ALIVE_SECS PRODUCT
  80         PRODUCT_ABBR PS_ASR PS_DISK PS_FAN PS_HARDWARE PS_MEMORY PS_NETWORK
  81         PS_OTHER PS_POST PS_RMC PS_SECURITY PS_SYS_POWER PS_SYS_STATUS
  82         PS_TEMPERATURE PS2_ADAPTER_POWER_UP_MODE PS2_FW_UPDATE_CMD
  83         PS2_FW_UPDATE_IMG_NAME PS2_FW_UPDATE_STATUS RMC_DS_GROUP SAC_PORT
  84         SERVER_CODEPAGE SERVER_HARD_RESET_PULSE_MS SERVER_HARD_RESET_VIA_IPMI
  85         SERVER_ID SERVER_IP SERVER_KEYBOARD SERVER_KEYBOARD_LANGUAGES_LIST
  86         SERVER_MEMORY SERVER_NAME SERVER_POWER_CHANGE_VIA_IPMI
  87         SERVER_POWER_OFF_MODE SERVER_POWER_OFF_PULSE_MS SERVER_POWER_ON_MODE
  88         SERVER_POWER_ON_PULSE_MS SERVER_TIMEZONE SERVER_URL
  89         SESSION_MANAGER_SESSION_TIMEOUT SI_DEF_POLL_INTERVAL_MS
  90         SI_DEF_POLL_OFFSET_MS SMTP_RESP_TIME_SEC SMTP_RETRIES
  91         SMTP_RETRY_DELAY_SEC SMTP_REVERSE_PATH SMTP_SERVER SNMP_AGENT_ENABLED
  92         SNMP_COMMUNITY SNMP_ENTERPRISE_ID SNMP_SERVER SNMP_SERVER_1
  93         SNMP_SERVER_2 SNMP_SERVER_3 SNMP_SERVER_4 SNMP_SERVER_5 SNMP_SERVER_6
  94         SNMP_SERVER_7 SNMP_SERVER_MAC SNMP_SYSOID SNMP_TRAP_MASK
  95         SNMP_TRAP_VERSION SSL_40_OR_128_ENCRYPTION SSL_CAPABLE_FIRMWARE
  96         SSL_ENABLE_ALOG SSL_ENABLE_ALOG_FALLBACK SSL_ENABLE_CLIENT_CERT
  97         SSL_ENABLE_HTTP SSL_ENABLE_HTTPS SSL_ENABLE_NOTIFY
  98         SSL_NOTIFICATION_TIME TELNET_ENABLE TELNET_PORT_NUM
  99         TERMINAL_DIRECT_CONNECT TERMINAL_ENCODING TEXT_CONSOLE_TIMEOUT
 100         TFTP_ADDR_FIRMWARE TFTP_ADDR_REBOOT TFTP_FIRMWARE_FILE TFTP_REBOOT_FILE
 101         TXT_REMOTE_CONSOLE_COLOR_MAP TXT_REMOTE_CONSOLE_FREQ
 102         USB_DEVICE_SETTINGS USE_SERVER_IP_ADDRESS USER_TIMEOUT VENDOR
 103         RMC_AUTODETECT RMC_FUNCTIONS RMC_MODULES AGENT_VERSION BIOS_VER
 104         BOARD_MFT BOARD_MODEL BOARD_PART_NUM BOARD_SERIAL BOARD_VER CAB_MFT
 105         CAB_MODEL CAB_PROD_NUM CAB_PROD_VER CAB_SERIAL CHA_MODEL
 106         CSV_ConfAlarmMailFrom CSV_ConfAlarmMailMessage CSV_ConfAlarmMailSubject
 107         CSV_ConfAlarmMailType CSV_ConfAlarmMailUserInfo0
 108         CSV_ConfAlarmMailUserInfo1 PER_USER_PAGING RMC_SEL_FILTER
 109         SERVER_AD_NAME SERVER_AD_NAME2 SERVER_AD_NAME3 SERVER_AD_NAME4
 110         SERVER_CONTACT SERVER_DESCRIPTION SERVER_IP_ADDRESS SERVER_IP_ADDRESS2
 111         SERVER_IP_ADDRESS3 SERVER_IP_ADDRESS4 SERVER_IP_DHCP SERVER_IP_DHCP2
 112         SERVER_IP_DHCP3 SERVER_IP_DHCP4 SERVER_IP_GATEWAY SERVER_IP_GATEWAY2
 113         SERVER_IP_GATEWAY3 SERVER_IP_GATEWAY4 SERVER_IP_NETMASK
 114         SERVER_IP_NETMASK2 SERVER_IP_NETMASK3 SERVER_IP_NETMASK4
 115         SERVER_LOCATION SERVER_MAC_ADDRESS SERVER_MAC_ADDRESS2
 116         SERVER_MAC_ADDRESS3 SERVER_MAC_ADDRESS4 SERVER_MAX_LAN_ADAPTER
 117         SERVER_OS SERVER_OS_VENDOR);
 118
 119 sub _crc16 {
 120         my $str = shift;
 121         my $crc = 0;
 122         for my $k (0..length($str)-1) {
 123                 $crc ^= ord(substr($str, $k, 1)) << 8;
 124                 for (0..7) {
 125                         $crc = (($crc & 0x8000) == 32768 ? ($crc<<1) ^ 0x1021 : $crc<<1);
 126                 }
 127         }
 128         $crc = $crc & 0xFFFF;
 129         return $crc;
 130 }
 131
 132 sub _hash {
 133         my ($password, $challenge) = @_;
 134         my @challenge_bytes = unpack 'c16', decode_base64($challenge);
 135         my @pwd_hash            = unpack 'c16', md5($password);
 136         my @xor_bytes;
 137         for my $i (0..15) {
 138                 $xor_bytes[$i] = $challenge_bytes[$i] ^ $pwd_hash[$i];
 139         };
 140         my $hash = md5(pack 'c16', @xor_bytes);
 141         my $crc = _crc16($hash);
 142         $hash .= chr($crc & 0xff) . chr($crc >> 8 & 0xff);
 143         return encode_base64($hash, "");
 144 }
 145
 146 sub _req {
 147         my $xml = shift;
 148         $request = HTTP::Request->new(POST => "http://${host}/cgi/bin");
 149         $request->header(Cookie => "sid=$sid");
 150         $request->content_type('application/x-www-form-urlencoded');
 151         $request->content($xml);
 152         $response = $ua->request($request);
 153         die("Error in request: " . $response->status_line . "\n") unless ($response->is_success);
 154         XMLin($response->content, SuppressEmpty => '');
 155 }
 156
 157 sub _cmd {
 158         my $cmd = shift;
 159
 160         my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="'.$cmd.'"></REQ></RMCSEQ>';
 161         my $res = _req($reqstr);
 162         if ($res->{RESP}->{RC} ne '0x0') {
 163                 print "${cmd} failed: ".$res->{RESP}->{RC}."\n";
 164                 undef;
 165         }
 166
 167         $res->{RESP};
 168 }
 169
 170 sub _getprop {
 171         my $property = shift;
 172
 173         my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="propget"><PROPLIST><PROP NAME="'.$property.'"/></PROPLIST></REQ></RMCSEQ>';
 174         my $resp = _req($reqstr);
 175
 176         print "get: ${property}\n" if ($verbose);
 177
 178         if ($resp->{RESP}->{RC} ne '0x0') {
 179                 $resp->{RESP}->{RC};
 180         } else {
 181                 $resp;
 182         }
 183 }
 184
 185 sub logout {
 186         print "Logout\n" if ($verbose);
 187         my $request = HTTP::Request->new(GET => "http://${host}/cgi/logout");
 188         $request->header(Cookie => "sid=$sid");
 189         my $response = $ua->request($request);
 190         die("While trying to logout: " . $response->status_line . "\n") unless ($response->is_success);
 191
 192         my $xmlin = XMLin($response->decoded_content);
 193         die "Error logging out: ".$xmlin->{RC} if ($xmlin->{RC} ne '0x0');
 194 }
 195
 196 sub setprop {
 197         my $property = shift;
 198         my $value = shift;
 199
 200         my $oldval = _getprop($property)->{RESP}->{PROPLIST}->{PROP}->{VAL};
 201
 202         if ($value eq $oldval) {
 203                 print "${property} is already ${value}\n" if ($verbose);
 204                 return;
 205         }
 206
 207         my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="propset"><PROP NAME="'.$property.'"><VAL>'.$value.'</VAL></PROP></REQ></RMCSEQ>';
 208         my $res = _req($reqstr);
 209
 210         if ($res->{RESP}->{RC} ne '0x0') {
 211                 print "Error setting ${property} to ${value}: ".$res->{RESP}->{RC}."\n";
 212                 undef;
 213         } else {
 214                 print "${property}: ${oldval} -> ${value}\n" if ($verbose);
 215                 $oldval;
 216         }
 217 }
 218
 219 sub serveraction {
 220         my $action = shift;
 221
 222         my $pmode = 2;
 223
 224         setprop("SERVER_HARD_RESET_VIA_IPMI", "FALSE");
 225         setprop("SERVER_POWER_CHANGE_VIA_IPMI", "FALSE");
 226         #PM Mode
 227         setprop("SERVER_POWER_ON_MODE", sprintf("0x%x", $pmode));
 228         setprop("SERVER_POWER_OFF_MODE", sprintf("0x%x", $pmode));
 229
 230         print "${action}...\n" if ($verbose);
 231         my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="serveraction"><ACT>'.$action.'</ACT></REQ></RMCSEQ>';
 232         my $res = _req($reqstr);
 233
 234         if ($res->{RESP}->{RC} ne '0x0') {
 235                 print "FAILED:".$res->{RESP}->{RC}."\n";
 236         }
 237 }
 238
 239 sub powerup {
 240         print "powerup\n" if ($verbose);
 241         setprop("SERVER_POWER_ON_PULSE_MS", sprintf("0x%x", $poweronms));
 242         setprop("SERVER_POWER_OFF_PULSE_MS", "0x0");
 243         serveraction("powercycle");
 244 }
 245
 246 sub powerdown {
 247         print "powerdown\n" if ($verbose);
 248         setprop("SERVER_POWER_ON_PULSE_MS", "0x0");
 249         setprop("SERVER_POWER_OFF_PULSE_MS", sprintf("0x%x", $poweroffms));
 250         serveraction("powercycle");
 251 }
 252
 253 sub powercycle {
 254         print "powercycle\n" if ($verbose);
 255         setprop("SERVER_POWER_ON_PULSE_MS", sprintf("0x%x", $poweronms));
 256         setprop("SERVER_POWER_OFF_PULSE_MS", sprintf("0x%x", $poweroffms));
 257         serveraction("powercycle");
 258 }
 259
 260 sub showprop {
 261         my $property = shift;
 262
 263         my $phash = _getprop($property)->{RESP}->{PROPLIST}->{PROP};
 264
 265         print "${property}: " . ${phash}->{VAL} . " (" . ${phash}->{PERMS} . ")\n";
 266 }
 267
 268 sub board_properties {
 269         my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="boardpropget"><PROPLIST><PROP NAME=""/></PROPLIST></REQ></RMCSEQ>';
 270         my $resp = _req($reqstr);
 271
 272         print " * Board Properties:\n";
 273         foreach my $bprop (@{$resp->{RESP}->{BPROPLIST}->{BPROP}}) {
 274                 print " * " . ${bprop}->{NAME} . ": " . ${bprop}->{VAL} . "\n";
 275         }
 276 }
 277
 278 sub show_boarddesc {
 279         my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="boardpropget"><BPROPLIST><BPROP NAME="BOARD_DESCRIPTION"/></BPROPLIST></REQ></RMCSEQ>';
 280         my $boarddesc64 = _req($reqstr)->{RESP}->{BPROPLIST}->{BPROP}->{VAL};
 281         my $boarddesc = decode_base64($boarddesc64);
 282         my @board = split(//, $boarddesc);
 283         foreach my $byte (@board) {
 284                 printf ("0x%02x ", ord($byte));
 285 }
 286 print "\n";
 287 }
 288
 289 sub show_all_vars {
 290         foreach my $fwvar (@fw_vars) {
 291                 showprop($fwvar);
 292         }
 293 }
 294
 295 sub usrlist {
 296         my $reqstr = '<?XML version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="usrlist"></REQ></RMCSEQ>';
 297         my $res = _req($reqstr);
 298         my @users = ();
 299
 300         if ($res->{RESP}->{RC} ne '0x0') {
 301                 print "FAILED:".$res->{RESP}->{RC}."\n";
 302                 ();
 303         } else {
 304                 if (ref($res->{RESP}->{USRLIST}->{USER}) eq 'ARRAY') {
 305                         foreach my $usr (@{$res->{RESP}->{USRLIST}->{USER}}) {
 306                                 push @users, $usr->{NAME};
 307                         }
 308                 } else {
 309                         push @users, $res->{RESP}->{USRLIST}->{USER}->{NAME};
 310                 }
 311         }
 312         @users;
 313 }
 314
 315 sub getusrprops {
 316         my $usr = shift;
 317
 318         my $reqstr = '<?XML version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="usrpropget"><USER NAME="'.$usr.'"></USER></REQ></RMCSEQ>';
 319         my $res = _req($reqstr)->{RESP}->{USER}->{PROP};
 320
 321         $res;
 322 }
 323
 324 sub usradd {
 325         my $usr = shift;
 326
 327         my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="usradd"><USER NAME="'.$usr.'"/></REQ></RMCSEQ>';
 328         my $res = _req($reqstr);
 329         if ($res->{RESP}->{RC} ne '0x0') {
 330                 print "FAILED:".$res->{RESP}->{RC}."\n";
 331         }
 332 }
 333
 334 sub setusrprop {
 335         my $usr = shift;
 336         my $property = shift;
 337         my $value = shift;
 338
 339         my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="usrpropget"><USER NAME="'.$usr.'"><PROP NAME="'.$property.'"></PROP></USER></REQ></RMCSEQ>';
 340         my $res = _req($reqstr);
 341
 342         my $oldval = ${res}->{RESP}->{USER}->{PROP}->{VAL};
 343
 344         if ($value eq $oldval) {
 345                 print "${property} is already ${value}\n" if ($verbose);
 346                 return;
 347         }
 348
 349         $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="usrpropset"><USER NAME="'.$usr.'"><PROP NAME="'.$property.'"><VAL>'.$value.'</VAL></PROP></USER></REQ></RMCSEQ>';
 350         $res = _req($reqstr);
 351
 352         if ($res->{RESP}->{RC} ne '0x0') {
 353                 print "Error setting ${property} to ${value}: ".$res->{RESP}->{RC}."\n";
 354                 undef;
 355         } else {
 356                 print "${property}: ${oldval} -> ${value}\n" if ($verbose);
 357                 $oldval;
 358         }
 359 }
 360
 361 sub syslog_debug {
 362         my $destination_ip = shift;
 363         my $bcast = shift;
 364
 365         my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="dbgmsglancfg"><IP>'.${destination_ip}.'</IP><BCAST>'.${bcast}.'</BCAST><STORE>FALSE</STORE></REQ></RMCSEQ>';
 366         my $res = _req($reqstr);
 367         if ($res->{RESP}->{RC} ne '0x0') {
 368                 print "FAILED:".$res->{RESP}->{RC}."\n";
 369                 return;
 370         }
 371
 372         $reqstr='<?XML version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="dbgmsgcfg"><ON>TRUE</ON><CHANNELMASK>0x1</CHANNELMASK><MMASK>0x1</MMASK><STORE>FALSE</STORE></REQ></RMCSEQ>';
 373         $res = _req($reqstr);
 374         if ($res->{RESP}->{RC} ne '0x0') {
 375                 print "FAILED:".$res->{RESP}->{RC}."\n";
 376                 return;
 377         }
 378
 379         print "Debug messages will be sent to ${destination_ip} (broadcast: ${bcast})\n";
 380 }
 381
 382 sub status {
 383         my $boardstatus = _cmd("boardstatus")->{STATUS};
 384         my $fw = _cmd("boardfwstatus");
 385         my $boardfwstatus = $fw->{STATUS};
 386         my $boardfwprogress = $fw->{PROGRESS};
 387         $bs = hex($boardstatus);
 388
 389         print "Server Power:\t\t" . (($bs & 0x01) ? "ON" : "OFF") . "\n";
 390         print "External PSU:\t\t" . (($bs & 0x02) ? "ON" : "OFF") . "\n";
 391         print "Battery:\t\t";
 392         if ($bs & 0x04) {
 393                 if ($bs & 0x08) {
 394                         print "LOW\n";
 395                 } elsif ($bs & 0x800) {
 396                         print "ON\n";
 397                 } else {
 398                         print "UNKNOWN\n";
 399                 }
 400         } else {
 401                 print "OFF\n";
 402         }
 403         print "Standby Power:\t\t" . (($bs & 0x08) ? "ON" : "OFF") . "\n";
 404         print "LAN:\t\t\t" . (($bs & 0x10) ? "CONNECTED" : "NC") . "\n";
 405         print "I2C:\t\t\t" . (($bs & 0x20) ? "CONNECTED" : "NC") . "\n";
 406         print "SMM:\t\t\t" . (($bs & 0x40) ? "CONNECTED" : "NC") . "\n";
 407         print "Instrumentation:\t" . (($bs & 0x200) ? "CONNECTED" : "NC") . "\n";
 408         print "ICMB:\t\t\t" . (($bs & 0x400) ? "CONNECTED" : "NC") . "\n";
 409         print "PPP:\t\t\t" . (($bs & 0x10000) ? "ON" : "OFF") . "\n";
 410         print "Paging:\t\t\t" . (($bs & 0x20000) ? "ON" : "OFF") . "\n";
 411         print "COM redirection:\t" . (($bs & 0x100000) ? "ON" : "OFF") . "\n";
 412         print "UART redirect:\t\t" . (($bs & 0x200000) ? "ON" : "OFF") . "\n";
 413         print "UART redirect pending:\t" . (($bs & 0x400000) ? "TRUE" : "FALSE") . "\n";
 414         print "Hex BoardStatus:\t${boardstatus}\n";
 415         my $fws = hex ($boardfwstatus);
 416         print "FW status:\t\t";
 417         if ($fws == 3 || $fws == 32771) {
 418                 print "WAITING";
 419         } else {
 420                 print "DONE";
 421         }
 422         print " (${boardfwstatus})\n";
 423         if (($fws & 0x8080) || ($fws & 0x80)) {
 424                 printf("FW error:\t\t0x%02x\n", ($fws & 0xff));
 425         }
 426         if ($fws != 0) {
 427                 print "FW upgrade progress:\t${boardfwprogress}\n";
 428         }
 429 }
 430
 431 sub login {
 432         my $user = shift;
 433         my $pass = shift;
 434
 435         my $response = $ua->get("http://${host}/cgi/challenge");
 436         die $response->status_line if (!($response->is_success));
 437
 438         my $xmlin = XMLin($response->decoded_content);
 439         die "Error getting Challenge: ".$xmlin->{RC} if ($xmlin->{RC} ne '0x0');
 440         my $challenge = $xmlin->{CHALLENGE};
 441         print "Challenge: ${challenge}\n" if ($verbose);
 442
 443         $sid = $response->headers->header('Set-Cookie');
 444         die "No SessionID!" if (!defined($sid));
 445         chomp($sid);
 446         $sid =~ s/.*sid=(.*);.*/$1/;
 447         print "SID: ${sid}\n" if ($verbose);
 448
 449         my $login_hash = _hash($pass, $challenge);
 450         print "Hash: ${login_hash}\n" if ($verbose);
 451
 452         my $request = HTTP::Request->new(GET => "http://${host}/cgi/login?user=${user}&hash=${login_hash}");
 453         $request->header(Cookie => "sid=$sid");
 454         $response = $ua->request($request);
 455         die("While trying to login: " . $response->status_line . "\n") unless ($response->is_success);
 456
 457         $xmlin = XMLin($response->decoded_content);
 458         die "Error logging in: ".$xmlin->{RC} if ($xmlin->{RC} ne '0x0');
 459
 460         $sid;
 461 }
 462
 463 sub read_inifile {
 464         my $filename = shift;
 465
 466         open(INIFILE,"<${filename}") || die("can't open config: ${filename}: $!");
 467         my %Ini = ();
 468         my @sections = ();
 469         while(<INIFILE>) {
 470                 chomp;
 471
 472                 next if (m/^#/);
 473
 474                 if (m/^\s*\[(.*)\]\s*$/) {
 475                         push @sections, $1;
 476                         next;
 477                 }
 478
 479                 if (@sections) {
 480                         if (m/^\s*([^=]+)\s*=\s*(.*)\s*$/) {
 481                                 ${$Ini{$sections[$#sections]}}{$1} = $2;
 482                         }
 483                 }
 484         }
 485         close(INIFILE);
 486
 487         %Ini;
 488 }
 489
 490 my %Config = read_inifile("$ENV{HOME}/.rsbs2rc");
 491
 492 my $valid_arg = 0;
 493 my $powup = 0;
 494 my $powdown = 0;
 495 my $powcyc = 0;
 496 my $reset = 0;
 497 my $resetrsbs2 = 0;
 498 my @sprop = ();
 499 my @gprop = ();
 500 my @xmlsend = ();
 501 my $show = 0;
 502 my $enable_debug = "";
 503 my $save = "";
 504 my $load = "";
 505 my $showstat = 0;
 506 my $hostalias;
 507
 508 while (defined($ARGV[0])) {
 509         SWITCH: for ($ARGV[0]) {
 510                 /^-v$/  && do {
 511                                 $verbose = 1;
 512                                 shift @ARGV;
 513                                 last SWITCH;
 514                         };
 515                 /^-g$/ && do {
 516                                 shift @ARGV;
 517                                 push @gprop, shift @ARGV;
 518                                 last SWITCH;
 519                         };
 520                 /^-s$/ && do {
 521                                 shift @ARGV;
 522                                 push @sprop, shift @ARGV;
 523                                 last SWITCH;
 524                         };
 525                 /^-u$/ && do {
 526                                 $powup = 1;
 527                                 shift @ARGV;
 528                                 last SWITCH;
 529                         };
 530                 /^-d$/ && do {
 531                                 $powdown = 1;
 532                                 shift @ARGV;
 533                                 last SWITCH;
 534                         };
 535                 /^-c$/ && do {
 536                                 $powcyc = 1;
 537                                 shift @ARGV;
 538                                 last SWITCH;
 539                         };
 540                 /^-r$/ && do {
 541                                 $reset = 1;
 542                                 shift @ARGV;
 543                                 last SWITCH;
 544                         };
 545                 /^-R$/ && do {
 546                                 $resetrsbs2 = 1;
 547                                 shift @ARGV;
 548                                 last SWITCH;
 549                         };
 550                 /^-l$/ && do {
 551                                 shift @ARGV;
 552                                 $enable_debug = shift @ARGV;
 553                                 last SWITCH;
 554                         };
 555                 /^-x$/ && do {
 556                                 $show = 1;
 557                                 shift @ARGV;
 558                                 last SWITCH;
 559                         };
 560                 /^-X$/ && do {
 561                                 shift @ARGV;
 562                                 push @xmlsend, shift @ARGV;
 563                                 last SWITCH;
 564                         };
 565                 /^-b$/ && do {
 566                                 $showstat = 1;
 567                                 shift @ARGV;
 568                                 last SWITCH;
 569                         };
 570                 /^-save$/ && do {
 571                                 shift @ARGV;
 572                                 $save = shift @ARGV;
 573                                 last SWITCH;
 574                         };
 575                 /^-load$/ && do {
 576                                 shift @ARGV;
 577                                 $load = shift @ARGV;
 578                                 last SWITCH;
 579                         };
 580
 581                 if (defined($ARGV[0])) {
 582                         $hostalias = $ARGV[0];
 583                         shift(@ARGV);
 584                         $valid_arg = 1;
 585                 }
 586
 587                 while ( defined($ARGV[0]) ) { $valid_arg = 0; shift(@ARGV); }
 588         }
 589 }
 590
 591 if ($valid_arg && (!defined($Config{$hostalias}))) {
 592         $valid_arg = 0;
 593 }
 594
 595 if (!$valid_arg) {
 596         print STDERR "Usage: $0 options card-alias\n";
 597         print STDERR "Options:\n";
 598         print STDERR "\t-g property\tget property value\n";
 599         print STDERR "\t-s property=val\tset property value\n";
 600         print STDERR "\t-u\t\tpowerup\n";
 601         print STDERR "\t-d\t\tpowerdown\n";
 602         print STDERR "\t-c\t\tpowercycle\n";
 603         print STDERR "\t-r\t\treset\n";
 604         print STDERR "\t-R\t\treset RSB S2 borad\n";
 605         print STDERR "\t-x\t\tshow all properties, variables and settings\n";
 606         print STDERR "\t-l IP\t\tsend SYSLOG debug messages to IP\n";
 607         print STDERR "\t-b\t\tshow board/server status\n";
 608         print STDERR "\t-X\t\tsend raw XML string (start with REQ tag)\n";
 609         print STDERR "\t-v\t\tverbose\n";
 610         print STDERR "\t-save file\tsave configuration to 'file'\n";
 611         print STDERR "\t-load file\tload configuration from 'file'\n";
 612         print STDERR "\n";
 613         print STDERR "card-alias\tone of: ";
 614         foreach my $alias (keys(%Config)) {
 615                 print STDERR "\"${alias}\" ";
 616         }
 617         print STDERR "(see ~/.rsbs2rc)\n";
 618         exit(1);
 619 }
 620
 621 $host = ${$Config{$hostalias}}{"host"};
 622 $poweronms = ${$Config{$hostalias}}{"poweronms"} if (defined(${$Config{$hostalias}}{"poweronms"}));
 623 $poweroffms = ${$Config{$hostalias}}{"poweroffms"} if (defined(${$Config{$hostalias}}{"poweroffms"}));
 624
 625 $sid = login(${$Config{$hostalias}}{"user"}, ${$Config{$hostalias}}{"pass"});
 626
 627 if ($show) {
 628         show_boarddesc();
 629         board_properties();
 630         show_all_vars();
 631 }
 632
 633 if (@gprop) {
 634         foreach my $p (@gprop) {
 635                 showprop($p);
 636         }
 637 }
 638
 639 if (@sprop) {
 640         foreach my $p (@sprop) {
 641                 (my $pr, $v) = split(/=/,$p,2);
 642                 my $oldval = setprop($pr, $v);
 643                 if (defined($oldval)) {
 644                         print "${pr}: ${oldval} -> ${v}\n" if (!$verbose);
 645                 }
 646         }
 647 }
 648
 649 if (@xmlsend) {
 650         foreach my $x (@xmlsend) {
 651                 print Dumper(_req('<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ>'.$x.'</RMCSEQ>'));
 652         }
 653 }
 654
 655 if ($save ne '') {
 656         my @dontsave = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX
 657         GATEWAY IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE
 658         ENABLE_DHCP MAC_ADDRESS LAST_CARD_NAME LAST_ENABLE_DHCP LAST_GATEWAY
 659         LAST_IP_ADDRESS LAST_NETMASK);
 660
 661         open (SAVEFILE, ">${save}") || die "Error opening save-file: $!\n";
 662         print SAVEFILE "[global]\n";
 663         print STDERR "saving" if (!$verbose);
 664         foreach my $ts (@fw_vars) {
 665                 next if (grep(/^${ts}$/, @dontsave));
 666
 667                 my $phash = _getprop($ts)->{RESP}->{PROPLIST}->{PROP};
 668                 next if ($phash->{PERMS} ne 'RW');
 669
 670                 print SAVEFILE "${ts}=".$phash->{VAL}."\n";
 671                 print STDERR "." if (!$verbose);
 672         }
 673         foreach my $usr (usrlist()) {
 674                 print SAVEFILE "\n[${usr}]\n";
 675                 foreach my $up (@{getusrprops($usr)}) {
 676                         next if ($up->{PERMS} ne 'RW');
 677
 678                         print SAVEFILE $up->{NAME}."=".$up->{VAL}."\n";
 679                 }
 680                 print STDERR "." if (!$verbose);
 681         }
 682         close(SAVEFILE);
 683         print STDERR "done\n" if (!$verbose);
 684 }
 685
 686 if ($load ne '') {
 687         my %loadfile = read_inifile("${load}");
 688         print STDERR "loading" if (!$verbose);
 689
 690         foreach my $p (keys(%{$loadfile{'global'}})) {
 691                 setprop($p, $loadfile{'global'}->{$p});
 692                 print STDERR "." if (!$verbose);
 693         }
 694
 695         my @users = usrlist();
 696         foreach my $usr (keys(%loadfile)) {
 697                 next if ($usr eq 'global');
 698                 if (!grep(/^${usr}$/, @users)) {
 699                         print STDERR "\nAdding user \"${usr}\".\n" if ($verbose);
 700                         usradd($usr);
 701                 }
 702                 foreach my $p (keys(%{$loadfile{$usr}})) {
 703                         setusrprop($usr, $p, $loadfile{$usr}->{$p});
 704                         print STDERR "." if (!$verbose);
 705                 }
 706         }
 707         print STDERR "done\n" if (!$verbose);
 708         print "Settings loaded, resetting board...\n";
 709         _cmd("boardreset");
 710         exit(0);
 711 }
 712
 713 if ($enable_debug ne '') {
 714         syslog_debug($enable_debug, "TRUE");
 715 }
 716
 717 if ($reset) {
 718         print "hardreset\n" if ($verbose);
 719         serveraction("hardreset");
 720 }
 721
 722 if ($powup) {
 723         powerup();
 724 }
 725
 726 if ($powdown) {
 727         powerdown();
 728 }
 729
 730 if ($powcyc) {
 731         powercycle();
 732 }
 733
 734 if ($showstat) {
 735         status();
 736 }
 737
 738 if ($resetrsbs2) {
 739         print "Resetting board...\n";
 740         _cmd("boardreset");
 741         exit(0);
 742 }
 743
 744 logout();