]> git.zerfleddert.de Git - rsbs2/blob - rsbs2.pl
35f836a2b2849b143f333796a6f8288c5ea0252e
[rsbs2] / rsbs2.pl
1 #!/usr/bin/perl -w
2
3 use LWP::UserAgent;
4 use XML::Simple;
5 use Data::Dumper;
6 use MIME::Base64;
7 use Digest::MD5 qw(md5);
8
9 my $ua = LWP::UserAgent->new;
10 my $sid;
11 my $host;
12 my $poweronms=200;
13 my $poweroffms=5000;
14 my $verbose = 0;
15
16 my @fw_vars = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX GATEWAY
17 IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE ENABLE_DHCP
18 ENABLE_DNS DNS_SERVER DNS_DOMAIN_NAME
19 ACCESS_CONTROL_SERVER_1 ACCESS_CONTROL_SERVER_2 ACCESS_CONTROL_SERVERS
20 ACPI_DISABLE_BIOS_SCAN ACPI_FORCE_RSDP_ADDRESS ACPI_FORCE_RSDT_ADDRESS
21 ACPI_RSDP_BIOS_ROM_ADDRESS ACPI_SCAN_DELAY_SECONDS AMR_AUTH_METHOD
22 AMR_DISABLE_PCI AMR_ENABLE_ISCSI_TIMEOUT AMR_ENABLED AMR_HOST_INTERFACE
23 AMR_SERVER_LIST AMR_USB_FDD_CBI_UFI_TRANSPORT AMR_USB_R2T_TIMEOUT_MSEC
24 AVR_4BIT_ACTION AVR_4BIT_SAMPLE_TIME AVR_ARCHITECTURE AVR_CHIP_TYPE
25 AVR_CLIENT_LANGUAGE AVR_DISABLE_SVR_MOUSE_ON_SESSION_START
26 AVR_KB_VERSION AVR_MAX_SESSION_COUNT AVR_MOUSE_ACCELERATION
27 AVR_MOUSE_MAX_STEP_SIZE AVR_NUMB_MOUSE_PACKETS
28 AVR_PCI_PATTERN_HANDS_OFF_ENABLED AVR_PREF_KB_STICKY_KEY_MODE_ON
29 AVR_PREF_KB_TYPING_MODE_ON AVR_PREF_KB_WARN_UNID_EV
30 AVR_REGISTERS_BASE_ADDR AVR_RESET_PAUSE AVR_SCREEN_REFRESH
31 AVR_SUPPORTED_CHIP AVR_TILE_TIMEOUT AVR_VIDEO_MEM_BASE_ADDR BAUDRATE
32 BAUDRATE_MODEM BAUDRATE_PPP BMC_SUPPORTS_GRACEFULL
33 BMC_TIMESYNC_INTERVAL CARD_NAME CONSOLE_IPMI_MOUSE_BYTE_TIME
34 CONSOLE_KEYBOARD_ACCESS_MODE CONSOLE_MOUSE_ACCESS_MODE
35 CONSOLE_VIDEO_PARAM_MODE CONTACT CONTACT_PHONE CRIT_TEMP_SHUTDOWN
36 CRIT_VOLT_SHUTDOWN DHCP_ADD_EXTENSION DHCP_ADD_SERIAL
37 DHCP_CONFIGURE_DNS DHCP_HOSTNAME_EXT DHCP_SERVER DHCP_USE_CARDNAME
38 DIAG_URL ENABLE_ANON_IPMI ENABLE_ANON_PCI
39 ENABLE_ANON_WEB ENABLE_AVR_CHIP_DETECT ENABLE_BMC_AUTODETECT
40 ENABLE_BMC_TIMESYNC ENABLE_CRTC_FETCH ENABLE_DHCP ENABLE_DHCP_HOSTNAME
41 ENABLE_DS_CONNECTIVITY ENABLE_IO_UART_DECODER ENABLE_LAN_100
42 ENABLE_LAN_AUTONEG ENABLE_LAN_FDUPLEX ENABLE_MEM_UART_DECODER
43 ENABLE_PPP ENABLE_REMOTE_FLOPPY_BOOT ENABLE_SELF_DELETE
44 ENABLE_SERIAL_DBG ETHDRIVER_SID EXPROM_BANNER EXPROM_EBDA_COMPATIBILITY
45 EXPROM_ENTRY EXPROM_EXIT_DELAY_SEC EXPROM_F3_DELAY_SEC
46 EXPROM_INT13_COMPATIBILITY EXPROM_SETUP_BANNER FIRMWARE_REVISION
47 FP_ACDC FP_AMR FP_AVR_ASR FP_AVR_GRAPHIC_CONSOLE FP_AVR_TEXT_CONSOLE
48 FP_AVRMANCONF_4BIT_SAMPLE FP_AVRMANCONF_ACCESS_MODES FP_AVRMANCONF_CHIP
49 FP_AVRMANCONF_MOUSE_ACCELERATION FP_AVRMANCONF_MOUSE_TYPE
50 FP_AVRMANCONF_RESET_PAUSE FP_AVRMANCONF_SCREEN_REFRESH FP_BATTERY
51 FP_BOARDRESET_BUTTON FP_COMREDIRECT FP_F3_PPP FP_I2C FP_ICMB FP_INSTR
52 FP_INTERNAL_LAN FP_KEY_CONSOLE FP_LAN_SPEED
53 FP_LAST_BOARD_POWER_WARNING_ENABLED FP_NO_BLADE_PANEL
54 FP_NO_CARDCONF_PANEL FP_NO_DIAG_PANEL FP_NO_DSAUTHCONF_PANEL
55 FP_NO_MANAGE_PANEL FP_NO_MEMORY_PANEL FP_NO_SENSOR_PANEL
56 FP_NO_SERVERCONF_PANEL FP_NO_SSL_PANEL FP_NO_SYSLOG_PANEL
57 FP_NO_USERCONF_PANEL FP_PAGING_EMAIL FP_PAGING_SERIAL FP_PAGING_SNMP
58 FP_PCI_CONFIG FP_PPP FP_PROP_BAUDRATE_REQBOOT FP_PROP_PPP_INIT_REQBOOT
59 FP_PROP_PS_REQBOOT FP_PROP_TERM_DIRECT_CONNECT_REQBOOT FP_REMOTE_BOOT
60 FP_REMOTE_DISK FP_REMOTE_POWER FP_SAC_CONSOLE FP_SEL FP_SENSOR_HISTORY
61 FP_SEQ_SEL FP_SERVER_POWER FP_SERVER_REBOOT FP_SERVER_RESET
62 FP_SERVER_SHUTDOWN FP_SMM FP_SSL FP_STATUS_DIAG_PANEL
63 FP_STATUS_MEMORY_PANEL FP_STATUS_PCI_CONFIG FP_STATUS_SAC_CONSOLE
64 FP_SYSTEM_LAN FP_TEXT_ASR FP_TEXT_CONSOLE FP_TUI FP_VERSION FP_VGA_ASR
65 FP_VGA_CONSOLE FP_VT100_CONSOLE GATEWAY GATEWAY_MAC
66 GRATUITOUS_ARP_INTERVAL HELP_LOCATION HIST0_SAMPLE_TIME HIST0_SENSOR_ID
67 HIST1_SAMPLE_TIME HIST1_SENSOR_ID HIST2_SAMPLE_TIME HIST2_SENSOR_ID
68 HIST3_SAMPLE_TIME HIST3_SENSOR_ID HTTP_PORT_NUM HTTP_SSL_PORT_NUM
69 I2C_ADDR_8BIT_CHASSIS_BMC I2C_ADDR_8BIT_MY_BMC I2C_ADDR_8BIT_THIS_CARD
70 INFOTXT_BPROP_ACCESS INFOTXT_DB_ACCESS IP_ADDRESS IP_ADDRESS_SOURCE
71 IPMB_RETRY_TIMEOUT IPMB_SEQ_NUM_TIMEOUT IPMB_TX_RETRIES
72 IPMI_COUNTRY_SELECT IPV4_HEADER_PARAMETERS ISCSI_DEVICE_VENDOR
73 ISCSI_PRODUCT_EMUL_BD ISCSI_PRODUCT_EMUL_CD ISCSI_PRODUCT_EMUL_FD
74 LAST_CARD_NAME LAST_ENABLE_DHCP LAST_GATEWAY LAST_IP_ADDRESS
75 LAST_NETMASK LOCATION MAC_ADDRESS MODEM_CONNECT MODEM_CONNECT2
76 MODEM_SEPARATOR NETMASK PAGE_RETRIES PAGE_RETRY_DELAY_SEC POST_ERRCODE
77 POST_PROP PPP_AVAILABLE PPP_INIT PPP_IP_ADDR PPP_NETMASK PPP_PORT
78 PPP_STATUS PPP_STAY_ALIVE_SECS PPP_WELCOME PPP2_BAUDRATE PPP2_INIT
79 PPP2_IP_ADDR PPP2_NETMASK PPP2_PORT PPP2_STAY_ALIVE_SECS PRODUCT
80 PRODUCT_ABBR PS_ASR PS_DISK PS_FAN PS_HARDWARE PS_MEMORY PS_NETWORK
81 PS_OTHER PS_POST PS_RMC PS_SECURITY PS_SYS_POWER PS_SYS_STATUS
82 PS_TEMPERATURE PS2_ADAPTER_POWER_UP_MODE PS2_FW_UPDATE_CMD
83 PS2_FW_UPDATE_IMG_NAME PS2_FW_UPDATE_STATUS RMC_DS_GROUP SAC_PORT
84 SERVER_CODEPAGE SERVER_HARD_RESET_PULSE_MS SERVER_HARD_RESET_VIA_IPMI
85 SERVER_ID SERVER_IP SERVER_KEYBOARD SERVER_KEYBOARD_LANGUAGES_LIST
86 SERVER_MEMORY SERVER_NAME SERVER_POWER_CHANGE_VIA_IPMI
87 SERVER_POWER_OFF_MODE SERVER_POWER_OFF_PULSE_MS SERVER_POWER_ON_MODE
88 SERVER_POWER_ON_PULSE_MS SERVER_TIMEZONE SERVER_URL
89 SESSION_MANAGER_SESSION_TIMEOUT SI_DEF_POLL_INTERVAL_MS
90 SI_DEF_POLL_OFFSET_MS SMTP_RESP_TIME_SEC SMTP_RETRIES
91 SMTP_RETRY_DELAY_SEC SMTP_REVERSE_PATH SMTP_SERVER SNMP_AGENT_ENABLED
92 SNMP_COMMUNITY SNMP_ENTERPRISE_ID SNMP_SERVER SNMP_SERVER_1
93 SNMP_SERVER_2 SNMP_SERVER_3 SNMP_SERVER_4 SNMP_SERVER_5 SNMP_SERVER_6
94 SNMP_SERVER_7 SNMP_SERVER_MAC SNMP_SYSOID SNMP_TRAP_MASK
95 SNMP_TRAP_VERSION SSL_40_OR_128_ENCRYPTION SSL_CAPABLE_FIRMWARE
96 SSL_ENABLE_ALOG SSL_ENABLE_ALOG_FALLBACK SSL_ENABLE_CLIENT_CERT
97 SSL_ENABLE_HTTP SSL_ENABLE_HTTPS SSL_ENABLE_NOTIFY
98 SSL_NOTIFICATION_TIME TELNET_ENABLE TELNET_PORT_NUM
99 TERMINAL_DIRECT_CONNECT TERMINAL_ENCODING TEXT_CONSOLE_TIMEOUT
100 TFTP_ADDR_FIRMWARE TFTP_ADDR_REBOOT TFTP_FIRMWARE_FILE TFTP_REBOOT_FILE
101 TXT_REMOTE_CONSOLE_COLOR_MAP TXT_REMOTE_CONSOLE_FREQ
102 USB_DEVICE_SETTINGS USE_SERVER_IP_ADDRESS USER_TIMEOUT VENDOR
103 RMC_AUTODETECT RMC_FUNCTIONS RMC_MODULES AGENT_VERSION BIOS_VER
104 BOARD_MFT BOARD_MODEL BOARD_PART_NUM BOARD_SERIAL BOARD_VER CAB_MFT
105 CAB_MODEL CAB_PROD_NUM CAB_PROD_VER CAB_SERIAL CHA_MODEL
106 CSV_ConfAlarmMailFrom CSV_ConfAlarmMailMessage CSV_ConfAlarmMailSubject
107 CSV_ConfAlarmMailType CSV_ConfAlarmMailUserInfo0
108 CSV_ConfAlarmMailUserInfo1 PER_USER_PAGING RMC_SEL_FILTER
109 SERVER_AD_NAME SERVER_AD_NAME2 SERVER_AD_NAME3 SERVER_AD_NAME4
110 SERVER_CONTACT SERVER_DESCRIPTION SERVER_IP_ADDRESS SERVER_IP_ADDRESS2
111 SERVER_IP_ADDRESS3 SERVER_IP_ADDRESS4 SERVER_IP_DHCP SERVER_IP_DHCP2
112 SERVER_IP_DHCP3 SERVER_IP_DHCP4 SERVER_IP_GATEWAY SERVER_IP_GATEWAY2
113 SERVER_IP_GATEWAY3 SERVER_IP_GATEWAY4 SERVER_IP_NETMASK
114 SERVER_IP_NETMASK2 SERVER_IP_NETMASK3 SERVER_IP_NETMASK4
115 SERVER_LOCATION SERVER_MAC_ADDRESS SERVER_MAC_ADDRESS2
116 SERVER_MAC_ADDRESS3 SERVER_MAC_ADDRESS4 SERVER_MAX_LAN_ADAPTER
117 SERVER_OS SERVER_OS_VENDOR);
118
119 sub _crc16 {
120 my $str = shift;
121 my $crc = 0;
122 for my $k (0..length($str)-1) {
123 $crc ^= ord(substr($str, $k, 1)) << 8;
124 for (0..7) {
125 $crc = (($crc & 0x8000) == 32768 ? ($crc<<1) ^ 0x1021 : $crc<<1);
126 }
127 }
128 $crc = $crc & 0xFFFF;
129 return $crc;
130 }
131
132 sub _hash {
133 my ($password, $challenge) = @_;
134 my @challenge_bytes = unpack 'c16', decode_base64($challenge);
135 my @pwd_hash = unpack 'c16', md5($password);
136 my @xor_bytes;
137 for my $i (0..15) {
138 $xor_bytes[$i] = $challenge_bytes[$i] ^ $pwd_hash[$i];
139 };
140 my $hash = md5(pack 'c16', @xor_bytes);
141 my $crc = _crc16($hash);
142 $hash .= chr($crc & 0xff) . chr($crc >> 8 & 0xff);
143 return encode_base64($hash, "");
144 }
145
146 sub _req {
147 my $xml = shift;
148 $request = HTTP::Request->new(POST => "http://${host}/cgi/bin");
149 $request->header(Cookie => "sid=$sid");
150 $request->content_type('application/x-www-form-urlencoded');
151 $request->content($xml);
152 $response = $ua->request($request);
153 die("Error in request: " . $response->status_line . "\n") unless ($response->is_success);
154 XMLin($response->content, SuppressEmpty => '');
155 }
156
157 sub _getprop {
158 my $property = shift;
159
160 my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="propget"><PROPLIST><PROP NAME="'.$property.'"/></PROPLIST></REQ></RMCSEQ>';
161 my $resp = _req($reqstr);
162
163 print "get: ${property}\n" if ($verbose);
164
165 if ($resp->{RESP}->{RC} ne '0x0') {
166 $resp->{RESP}->{RC};
167 } else {
168 $resp;
169 }
170 }
171
172 sub logout {
173 print "Logout\n" if ($verbose);
174 my $request = HTTP::Request->new(GET => "http://${host}/cgi/logout");
175 $request->header(Cookie => "sid=$sid");
176 my $response = $ua->request($request);
177 die("While trying to logout: " . $response->status_line . "\n") unless ($response->is_success);
178
179 my $xmlin = XMLin($response->decoded_content);
180 die "Error logging out: ".$xmlin->{RC} if ($xmlin->{RC} ne '0x0');
181 }
182
183 sub setprop {
184 my $property = shift;
185 my $value = shift;
186
187 my $oldval = _getprop($property)->{RESP}->{PROPLIST}->{PROP}->{VAL};
188
189 if ($value eq $oldval) {
190 print "${property} is already ${value}\n" if ($verbose);
191 return;
192 }
193
194 my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="propset"><PROP NAME="'.$property.'"><VAL>'.$value.'</VAL></PROP></REQ></RMCSEQ>';
195 my $res = _req($reqstr);
196
197 if ($res->{RESP}->{RC} ne '0x0') {
198 print "Error setting ${property} to ${value}: ".$res->{RESP}->{RC}."\n";
199 undef;
200 } else {
201 print "${property}: ${oldval} -> ${value}\n" if ($verbose);
202 $oldval;
203 }
204 }
205
206 sub serveraction {
207 my $action = shift;
208
209 my $pmode = 2;
210
211 setprop("SERVER_HARD_RESET_VIA_IPMI", "FALSE");
212 setprop("SERVER_POWER_CHANGE_VIA_IPMI", "FALSE");
213 #PM Mode
214 setprop("SERVER_POWER_ON_MODE", sprintf("0x%x", $pmode));
215 setprop("SERVER_POWER_OFF_MODE", sprintf("0x%x", $pmode));
216
217 print "${action}...\n" if ($verbose);
218 my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="serveraction"><ACT>'.$action.'</ACT></REQ></RMCSEQ>';
219 my $res = _req($reqstr);
220
221 if ($res->{RESP}->{RC} ne '0x0') {
222 print "FAILED:".$res->{RESP}->{RC}."\n";
223 }
224 }
225
226 sub powerup {
227 print "powerup\n" if ($verbose);
228 setprop("SERVER_POWER_ON_PULSE_MS", sprintf("0x%x", $poweronms));
229 setprop("SERVER_POWER_OFF_PULSE_MS", "0x0");
230 serveraction("powercycle");
231 }
232
233 sub powerdown {
234 print "powerdown\n" if ($verbose);
235 setprop("SERVER_POWER_ON_PULSE_MS", "0x0");
236 setprop("SERVER_POWER_OFF_PULSE_MS", sprintf("0x%x", $poweroffms));
237 serveraction("powercycle");
238 }
239
240 sub powercycle {
241 print "powercycle\n" if ($verbose);
242 setprop("SERVER_POWER_ON_PULSE_MS", sprintf("0x%x", $poweronms));
243 setprop("SERVER_POWER_OFF_PULSE_MS", sprintf("0x%x", $poweroffms));
244 serveraction("powercycle");
245 }
246
247 sub showprop {
248 my $property = shift;
249
250 my $phash = _getprop($property)->{RESP}->{PROPLIST}->{PROP};
251
252 print "${property}: " . ${phash}->{VAL} . " (" . ${phash}->{PERMS} . ")\n";
253 }
254
255 sub board_properties {
256 my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="boardpropget"><PROPLIST><PROP NAME=""/></PROPLIST></REQ></RMCSEQ>';
257 my $resp = _req($reqstr);
258
259 print " * Board Properties:\n";
260 foreach my $bprop (@{$resp->{RESP}->{BPROPLIST}->{BPROP}}) {
261 print " * " . ${bprop}->{NAME} . ": " . ${bprop}->{VAL} . "\n";
262 }
263 }
264
265 sub show_boarddesc {
266 my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="boardpropget"><BPROPLIST><BPROP NAME="BOARD_DESCRIPTION"/></BPROPLIST></REQ></RMCSEQ>';
267 my $boarddesc64 = _req($reqstr)->{RESP}->{BPROPLIST}->{BPROP}->{VAL};
268 my $boarddesc = decode_base64($boarddesc64);
269 my @board = split(//, $boarddesc);
270 foreach my $byte (@board) {
271 printf ("0x%02x ", ord($byte));
272 }
273 print "\n";
274 }
275
276 sub show_all_vars {
277 foreach my $fwvar (@fw_vars) {
278 showprop($fwvar);
279 }
280 }
281
282 sub usrlist {
283 my $reqstr = '<?XML version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="usrlist"></REQ></RMCSEQ>';
284 my $res = _req($reqstr);
285 my @users = ();
286
287 if ($res->{RESP}->{RC} ne '0x0') {
288 print "FAILED:".$res->{RESP}->{RC}."\n";
289 ();
290 } else {
291 if (ref($res->{RESP}->{USRLIST}->{USER}) eq 'ARRAY') {
292 foreach my $usr (@{$res->{RESP}->{USRLIST}->{USER}}) {
293 push @users, $usr->{NAME};
294 }
295 } else {
296 push @users, $res->{RESP}->{USRLIST}->{USER}->{NAME};
297 }
298 }
299 @users;
300 }
301
302 sub getusrprops {
303 my $usr = shift;
304
305 my $reqstr = '<?XML version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="usrpropget"><USER NAME="'.$usr.'"></USER></REQ></RMCSEQ>';
306 my $res = _req($reqstr)->{RESP}->{USER}->{PROP};
307
308 $res;
309 }
310
311 sub usradd {
312 my $usr = shift;
313
314 my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="usradd"><USER NAME="michael"/></REQ></RMCSEQ>';
315 my $res = _req($reqstr);
316 if ($res->{RESP}->{RC} ne '0x0') {
317 print "FAILED:".$res->{RESP}->{RC}."\n";
318 }
319 }
320
321 sub setusrprop {
322 my $usr = shift;
323 my $property = shift;
324 my $value = shift;
325
326 my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="usrpropget"><USER NAME="'.$usr.'"><PROP NAME="'.$property.'"></PROP></USER></REQ></RMCSEQ>';
327 my $res = _req($reqstr);
328
329 my $oldval = ${res}->{RESP}->{USER}->{PROP}->{VAL};
330
331 if ($value eq $oldval) {
332 print "${property} is already ${value}\n" if ($verbose);
333 return;
334 }
335
336 $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="usrpropset"><USER NAME="'.$usr.'"><PROP NAME="'.$property.'"><VAL>'.$value.'</VAL></PROP></USER></REQ></RMCSEQ>';
337 $res = _req($reqstr);
338
339 if ($res->{RESP}->{RC} ne '0x0') {
340 print "Error setting ${property} to ${value}: ".$res->{RESP}->{RC}."\n";
341 undef;
342 } else {
343 print "${property}: ${oldval} -> ${value}\n" if ($verbose);
344 $oldval;
345 }
346 }
347
348 sub syslog_debug {
349 my $destination_ip = shift;
350 my $bcast = shift;
351
352 my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="dbgmsglancfg"><IP>'.${destination_ip}.'</IP><BCAST>'.${bcast}.'</BCAST><STORE>FALSE</STORE></REQ></RMCSEQ>';
353 my $res = _req($reqstr);
354 if ($res->{RESP}->{RC} ne '0x0') {
355 print "FAILED:".$res->{RESP}->{RC}."\n";
356 return;
357 }
358
359 $reqstr='<?XML version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="dbgmsgcfg"><ON>TRUE</ON><CHANNELMASK>0x1</CHANNELMASK><MMASK>0x1</MMASK><STORE>FALSE</STORE></REQ></RMCSEQ>';
360 $res = _req($reqstr);
361 if ($res->{RESP}->{RC} ne '0x0') {
362 print "FAILED:".$res->{RESP}->{RC}."\n";
363 return;
364 }
365
366 print "Debug messages will be sent to ${destination_ip} (broadcast: ${bcast})\n";
367 }
368
369 sub login {
370 my $user = shift;
371 my $pass = shift;
372
373 my $response = $ua->get("http://${host}/cgi/challenge");
374 die $response->status_line if (!($response->is_success));
375
376 my $xmlin = XMLin($response->decoded_content);
377 die "Error getting Challenge: ".$xmlin->{RC} if ($xmlin->{RC} ne '0x0');
378 my $challenge = $xmlin->{CHALLENGE};
379 print "Challenge: ${challenge}\n" if ($verbose);
380
381 $sid = $response->headers->header('Set-Cookie');
382 die "No SessionID!" if (!defined($sid));
383 chomp($sid);
384 $sid =~ s/.*sid=(.*);.*/$1/;
385 print "SID: ${sid}\n" if ($verbose);
386
387 my $login_hash = _hash($pass, $challenge);
388 print "Hash: ${login_hash}\n" if ($verbose);
389
390 my $request = HTTP::Request->new(GET => "http://${host}/cgi/login?user=${user}&hash=${login_hash}");
391 $request->header(Cookie => "sid=$sid");
392 $response = $ua->request($request);
393 die("While trying to login: " . $response->status_line . "\n") unless ($response->is_success);
394
395 $xmlin = XMLin($response->decoded_content);
396 die "Error logging in: ".$xmlin->{RC} if ($xmlin->{RC} ne '0x0');
397
398 $sid;
399 }
400
401 sub read_inifile {
402 my $filename = shift;
403
404 open(INIFILE,"<${filename}") || die("can't open config: ${filename}: $!");
405 my %Ini = ();
406 my @sections = ();
407 while(<INIFILE>) {
408 chomp;
409
410 next if (m/^#/);
411
412 if (m/^\s*\[(.*)\]\s*$/) {
413 push @sections, $1;
414 next;
415 }
416
417 if (@sections) {
418 if (m/^\s*([^=]+)\s*=\s*(.*)\s*$/) {
419 ${$Ini{$sections[$#sections]}}{$1} = $2;
420 }
421 }
422 }
423 close(INIFILE);
424
425 %Ini;
426 }
427
428 my %Config = read_inifile("$ENV{HOME}/.rsbs2rc");
429
430 my $valid_arg = 0;
431 my $powup = 0;
432 my $powdown = 0;
433 my $powcyc = 0;
434 my $reset = 0;
435 my @sprop = ();
436 my @gprop = ();
437 my $show = 0;
438 my $enable_debug = "";
439 my $save = "";
440 my $load = "";
441 my $hostalias;
442
443 while (defined($ARGV[0])) {
444 SWITCH: for ($ARGV[0]) {
445 /^-v$/ && do {
446 $verbose = 1;
447 shift @ARGV;
448 last SWITCH;
449 };
450 /^-g$/ && do {
451 shift @ARGV;
452 push @gprop, shift @ARGV;
453 last SWITCH;
454 };
455 /^-s$/ && do {
456 shift @ARGV;
457 push @sprop, shift @ARGV;
458 last SWITCH;
459 };
460 /^-u$/ && do {
461 $powup = 1;
462 shift @ARGV;
463 last SWITCH;
464 };
465 /^-d$/ && do {
466 $powdown = 1;
467 shift @ARGV;
468 last SWITCH;
469 };
470 /^-c$/ && do {
471 $powcyc = 1;
472 shift @ARGV;
473 last SWITCH;
474 };
475 /^-r$/ && do {
476 $reset = 1;
477 shift @ARGV;
478 last SWITCH;
479 };
480 /^-l$/ && do {
481 shift @ARGV;
482 $enable_debug = shift @ARGV;
483 last SWITCH;
484 };
485 /^-x$/ && do {
486 $show = 1;
487 shift @ARGV;
488 last SWITCH;
489 };
490 /^-save$/ && do {
491 shift @ARGV;
492 $save = shift @ARGV;
493 last SWITCH;
494 };
495 /^-load$/ && do {
496 shift @ARGV;
497 $load = shift @ARGV;
498 last SWITCH;
499 };
500
501 if (defined($ARGV[0])) {
502 $hostalias = $ARGV[0];
503 shift(@ARGV);
504 $valid_arg = 1;
505 }
506
507 while ( defined($ARGV[0]) ) { $valid_arg = 0; shift(@ARGV); }
508 }
509 }
510
511 if ($valid_arg && (!defined(${$Config{$hostalias}}{'host'}))) {
512 $valid_arg = 0;
513 }
514
515 if (!$valid_arg) {
516 print STDERR "Usage: $0 options card-alias\n";
517 print STDERR "Options:\n";
518 print STDERR "\t-g property\tget property value\n";
519 print STDERR "\t-s property=val\tset property value\n";
520 print STDERR "\t-u\t\tpowerup\n";
521 print STDERR "\t-d\t\tpowerdown\n";
522 print STDERR "\t-c\t\tpowercycle\n";
523 print STDERR "\t-r\t\treset\n";
524 print STDERR "\t-x\t\tshow all properties, variables and settings\n";
525 print STDERR "\t-l IP\t\tsend SYSLOG debug messages to IP\n";
526 print STDERR "\t-v\t\tverbose\n";
527 print STDERR "\t-save file\tsave configuration to 'file'\n";
528 print STDERR "\t-load file\tload configuration from 'file'\n";
529 print STDERR "\n";
530 print STDERR "card-alias\tone of: ";
531 foreach my $alias (keys(%Config)) {
532 print STDERR "\"${alias}\" ";
533 }
534 print STDERR "(see ~/.rsbs2rc)\n";
535 exit(1);
536 }
537
538 $host = ${$Config{$hostalias}}{"host"};
539 $poweronms = ${$Config{$hostalias}}{"poweronms"} if (defined(${$Config{$hostalias}}{"poweronms"}));
540 $poweroffms = ${$Config{$hostalias}}{"poweroffms"} if (defined(${$Config{$hostalias}}{"poweroffms"}));
541
542 $sid = login(${$Config{$hostalias}}{"user"}, ${$Config{$hostalias}}{"pass"});
543
544 if ($show) {
545 show_boarddesc();
546 board_properties();
547 show_all_vars();
548 }
549
550 if (@gprop) {
551 foreach my $p (@gprop) {
552 showprop($p);
553 }
554 }
555
556 if (@sprop) {
557 foreach my $p (@sprop) {
558 (my $pr, $v) = split(/=/,$p,2);
559 my $oldval = setprop($pr, $v);
560 if (defined($oldval)) {
561 print "${pr}: ${oldval} -> ${v}\n" if (!$verbose);
562 }
563 }
564 }
565
566 if ($save ne '') {
567 my @dontsave = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX
568 GATEWAY IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE
569 ENABLE_DHCP MAC_ADDRESS LAST_CARD_NAME LAST_ENABLE_DHCP LAST_GATEWAY
570 LAST_IP_ADDRESS LAST_NETMASK);
571
572 open (SAVEFILE, ">${save}") || die "Error opening save-file: $!\n";
573 print SAVEFILE "[global]\n";
574 print STDERR "saving" if (!$verbose);
575 foreach my $ts (@fw_vars) {
576 next if (grep(/^${ts}$/, @dontsave));
577
578 my $phash = _getprop($ts)->{RESP}->{PROPLIST}->{PROP};
579 next if ($phash->{PERMS} ne 'RW');
580
581 print SAVEFILE "${ts}=".$phash->{VAL}."\n";
582 print STDERR "." if (!$verbose);
583 }
584 foreach my $usr (usrlist()) {
585 print SAVEFILE "\n[${usr}]\n";
586 foreach my $up (@{getusrprops($usr)}) {
587 next if ($up->{PERMS} ne 'RW');
588
589 print SAVEFILE $up->{NAME}."=".$up->{VAL}."\n";
590 }
591 print STDERR "." if (!$verbose);
592 }
593 close(SAVEFILE);
594 print STDERR "done\n" if (!$verbose);
595 }
596
597 if ($load ne '') {
598 my %loadfile = read_inifile("${load}");
599 print STDERR "loading" if (!$verbose);
600
601 foreach my $p (keys(%{$loadfile{'global'}})) {
602 setprop($p, $loadfile{'global'}->{$p});
603 print STDERR "." if (!$verbose);
604 }
605
606 my @users = usrlist();
607 foreach my $usr (keys(%loadfile)) {
608 next if ($usr eq 'global');
609 if (!grep(/^${usr}$/, @users)) {
610 print STDERR "\nAdding user \"${usr}\".\n" if ($verbose);
611 usradd($usr);
612 }
613 foreach my $p (keys(%{$loadfile{$usr}})) {
614 setusrprop($usr, $p, $loadfile{$usr}->{$p});
615 print STDERR "." if (!$verbose);
616 }
617 }
618 print STDERR "done\n" if (!$verbose);
619 print "Settings loaded, resetting board...\n";
620 my $reqstr='<?XML version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="boardreset"></REQ></RMCSEQ>';
621 _req($reqstr);
622 exit(0);
623 }
624
625 if ($enable_debug ne '') {
626 syslog_debug($enable_debug, "TRUE");
627 }
628
629 if ($reset) {
630 print "hardreset\n" if ($verbose);
631 serveraction("hardreset");
632 }
633
634 if ($powup) {
635 powerup();
636 }
637
638 if ($powdown) {
639 powerdown();
640 }
641
642 if ($powcyc) {
643 powercycle();
644 }
645
646 logout();
Impressum, Datenschutz