git.zerfleddert.de Git - rsbs2/blob - rsbs2.pl

   1 #!/usr/bin/perl -w
   2
   3 use LWP::UserAgent;
   4 use XML::Simple;
   5 use Data::Dumper;
   6 use MIME::Base64;
   7 use Digest::MD5 qw(md5);
   8
   9 my $ua = LWP::UserAgent->new;
  10 my $sid;
  11 my $host;
  12 my $poweronms=200;
  13 my $poweroffms=4500;
  14
  15 my @fw_vars = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX GATEWAY
  16         IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE ENABLE_DHCP
  17         ENABLE_DNS DNS_SERVER DNS_DOMAIN_NAME DHCP_CONFIGURE_DNS
  18         ACCESS_CONTROL_SERVER_1 ACCESS_CONTROL_SERVER_2 ACCESS_CONTROL_SERVERS
  19         ACPI_DISABLE_BIOS_SCAN ACPI_FORCE_RSDP_ADDRESS ACPI_FORCE_RSDT_ADDRESS
  20         ACPI_RSDP_BIOS_ROM_ADDRESS ACPI_SCAN_DELAY_SECONDS AMR_AUTH_METHOD
  21         AMR_DISABLE_PCI AMR_ENABLE_ISCSI_TIMEOUT AMR_ENABLED AMR_HOST_INTERFACE
  22         AMR_SERVER_LIST AMR_USB_FDD_CBI_UFI_TRANSPORT AMR_USB_R2T_TIMEOUT_MSEC
  23         AVR_4BIT_ACTION AVR_4BIT_SAMPLE_TIME AVR_ARCHITECTURE AVR_CHIP_TYPE
  24         AVR_CLIENT_LANGUAGE AVR_DISABLE_SVR_MOUSE_ON_SESSION_START
  25         AVR_KB_VERSION AVR_MAX_SESSION_COUNT AVR_MOUSE_ACCELERATION
  26         AVR_MOUSE_MAX_STEP_SIZE AVR_NUMB_MOUSE_PACKETS
  27         AVR_PCI_PATTERN_HANDS_OFF_ENABLED AVR_PREF_KB_STICKY_KEY_MODE_ON
  28         AVR_PREF_KB_TYPING_MODE_ON AVR_PREF_KB_WARN_UNID_EV
  29         AVR_REGISTERS_BASE_ADDR AVR_RESET_PAUSE AVR_SCREEN_REFRESH
  30         AVR_SUPPORTED_CHIP AVR_TILE_TIMEOUT AVR_VIDEO_MEM_BASE_ADDR BAUDRATE
  31         BAUDRATE_MODEM BAUDRATE_PPP BMC_SUPPORTS_GRACEFULL
  32         BMC_TIMESYNC_INTERVAL CARD_NAME CONSOLE_IPMI_MOUSE_BYTE_TIME
  33         CONSOLE_KEYBOARD_ACCESS_MODE CONSOLE_MOUSE_ACCESS_MODE
  34         CONSOLE_VIDEO_PARAM_MODE CONTACT CONTACT_PHONE CRIT_TEMP_SHUTDOWN
  35         CRIT_VOLT_SHUTDOWN DHCP_ADD_EXTENSION DHCP_ADD_SERIAL
  36         DHCP_CONFIGURE_DNS DHCP_HOSTNAME_EXT DHCP_SERVER DHCP_USE_CARDNAME
  37         DIAG_URL DNS_DOMAIN_NAME DNS_SERVER ENABLE_ANON_IPMI ENABLE_ANON_PCI
  38         ENABLE_ANON_WEB ENABLE_AVR_CHIP_DETECT ENABLE_BMC_AUTODETECT
  39         ENABLE_BMC_TIMESYNC ENABLE_CRTC_FETCH ENABLE_DHCP ENABLE_DHCP_HOSTNAME
  40         ENABLE_DNS ENABLE_DS_CONNECTIVITY ENABLE_IO_UART_DECODER ENABLE_LAN_100
  41         ENABLE_LAN_AUTONEG ENABLE_LAN_FDUPLEX ENABLE_MEM_UART_DECODER
  42         ENABLE_PPP ENABLE_REMOTE_FLOPPY_BOOT ENABLE_SELF_DELETE
  43         ENABLE_SERIAL_DBG ETHDRIVER_SID EXPROM_BANNER EXPROM_EBDA_COMPATIBILITY
  44         EXPROM_ENTRY EXPROM_EXIT_DELAY_SEC EXPROM_F3_DELAY_SEC
  45         EXPROM_INT13_COMPATIBILITY EXPROM_SETUP_BANNER FIRMWARE_REVISION
  46         FP_ACDC FP_AMR FP_AVR_ASR FP_AVR_GRAPHIC_CONSOLE FP_AVR_TEXT_CONSOLE
  47         FP_AVRMANCONF_4BIT_SAMPLE FP_AVRMANCONF_ACCESS_MODES FP_AVRMANCONF_CHIP
  48         FP_AVRMANCONF_MOUSE_ACCELERATION FP_AVRMANCONF_MOUSE_TYPE
  49         FP_AVRMANCONF_RESET_PAUSE FP_AVRMANCONF_SCREEN_REFRESH FP_BATTERY
  50         FP_BOARDRESET_BUTTON FP_COMREDIRECT FP_F3_PPP FP_I2C FP_ICMB FP_INSTR
  51         FP_INTERNAL_LAN FP_KEY_CONSOLE FP_LAN_SPEED
  52         FP_LAST_BOARD_POWER_WARNING_ENABLED FP_NO_BLADE_PANEL
  53         FP_NO_CARDCONF_PANEL FP_NO_DIAG_PANEL FP_NO_DSAUTHCONF_PANEL
  54         FP_NO_MANAGE_PANEL FP_NO_MEMORY_PANEL FP_NO_SENSOR_PANEL
  55         FP_NO_SERVERCONF_PANEL FP_NO_SSL_PANEL FP_NO_SYSLOG_PANEL
  56         FP_NO_USERCONF_PANEL FP_PAGING_EMAIL FP_PAGING_SERIAL FP_PAGING_SNMP
  57         FP_PCI_CONFIG FP_PPP FP_PROP_BAUDRATE_REQBOOT FP_PROP_PPP_INIT_REQBOOT
  58         FP_PROP_PS_REQBOOT FP_PROP_TERM_DIRECT_CONNECT_REQBOOT FP_REMOTE_BOOT
  59         FP_REMOTE_DISK FP_REMOTE_POWER FP_SAC_CONSOLE FP_SEL FP_SENSOR_HISTORY
  60         FP_SEQ_SEL FP_SERVER_POWER FP_SERVER_REBOOT FP_SERVER_RESET
  61         FP_SERVER_SHUTDOWN FP_SMM FP_SSL FP_STATUS_DIAG_PANEL
  62         FP_STATUS_MEMORY_PANEL FP_STATUS_PCI_CONFIG FP_STATUS_SAC_CONSOLE
  63         FP_SYSTEM_LAN FP_TEXT_ASR FP_TEXT_CONSOLE FP_TUI FP_VERSION FP_VGA_ASR
  64         FP_VGA_CONSOLE FP_VT100_CONSOLE GATEWAY GATEWAY_MAC
  65         GRATUITOUS_ARP_INTERVAL HELP_LOCATION HIST0_SAMPLE_TIME HIST0_SENSOR_ID
  66         HIST1_SAMPLE_TIME HIST1_SENSOR_ID HIST2_SAMPLE_TIME HIST2_SENSOR_ID
  67         HIST3_SAMPLE_TIME HIST3_SENSOR_ID HTTP_PORT_NUM HTTP_SSL_PORT_NUM
  68         I2C_ADDR_8BIT_CHASSIS_BMC I2C_ADDR_8BIT_MY_BMC I2C_ADDR_8BIT_THIS_CARD
  69         INFOTXT_BPROP_ACCESS INFOTXT_DB_ACCESS IP_ADDRESS IP_ADDRESS_SOURCE
  70         IPMB_RETRY_TIMEOUT IPMB_SEQ_NUM_TIMEOUT IPMB_TX_RETRIES
  71         IPMI_COUNTRY_SELECT IPV4_HEADER_PARAMETERS ISCSI_DEVICE_VENDOR
  72         ISCSI_PRODUCT_EMUL_BD ISCSI_PRODUCT_EMUL_CD ISCSI_PRODUCT_EMUL_FD
  73         LAST_CARD_NAME LAST_ENABLE_DHCP LAST_GATEWAY LAST_IP_ADDRESS
  74         LAST_NETMASK LOCATION MAC_ADDRESS MODEM_CONNECT MODEM_CONNECT2
  75         MODEM_SEPARATOR NETMASK PAGE_RETRIES PAGE_RETRY_DELAY_SEC POST_ERRCODE
  76         POST_PROP PPP_AVAILABLE PPP_INIT PPP_IP_ADDR PPP_NETMASK PPP_PORT
  77         PPP_STATUS PPP_STAY_ALIVE_SECS PPP_WELCOME PPP2_BAUDRATE PPP2_INIT
  78         PPP2_IP_ADDR PPP2_NETMASK PPP2_PORT PPP2_STAY_ALIVE_SECS PRODUCT
  79         PRODUCT_ABBR PS_ASR PS_DISK PS_FAN PS_HARDWARE PS_MEMORY PS_NETWORK
  80         PS_OTHER PS_POST PS_RMC PS_SECURITY PS_SYS_POWER PS_SYS_STATUS
  81         PS_TEMPERATURE PS2_ADAPTER_POWER_UP_MODE PS2_FW_UPDATE_CMD
  82         PS2_FW_UPDATE_IMG_NAME PS2_FW_UPDATE_STATUS RMC_DS_GROUP SAC_PORT
  83         SERVER_CODEPAGE SERVER_HARD_RESET_PULSE_MS SERVER_HARD_RESET_VIA_IPMI
  84         SERVER_ID SERVER_IP SERVER_KEYBOARD SERVER_KEYBOARD_LANGUAGES_LIST
  85         SERVER_MEMORY SERVER_NAME SERVER_POWER_CHANGE_VIA_IPMI
  86         SERVER_POWER_OFF_MODE SERVER_POWER_OFF_PULSE_MS SERVER_POWER_ON_MODE
  87         SERVER_POWER_ON_PULSE_MS SERVER_TIMEZONE SERVER_URL
  88         SESSION_MANAGER_SESSION_TIMEOUT SI_DEF_POLL_INTERVAL_MS
  89         SI_DEF_POLL_OFFSET_MS SMTP_RESP_TIME_SEC SMTP_RETRIES
  90         SMTP_RETRY_DELAY_SEC SMTP_REVERSE_PATH SMTP_SERVER SNMP_AGENT_ENABLED
  91         SNMP_COMMUNITY SNMP_ENTERPRISE_ID SNMP_SERVER SNMP_SERVER_1
  92         SNMP_SERVER_2 SNMP_SERVER_3 SNMP_SERVER_4 SNMP_SERVER_5 SNMP_SERVER_6
  93         SNMP_SERVER_7 SNMP_SERVER_MAC SNMP_SYSOID SNMP_TRAP_MASK
  94         SNMP_TRAP_VERSION SSL_40_OR_128_ENCRYPTION SSL_CAPABLE_FIRMWARE
  95         SSL_ENABLE_ALOG SSL_ENABLE_ALOG_FALLBACK SSL_ENABLE_CLIENT_CERT
  96         SSL_ENABLE_HTTP SSL_ENABLE_HTTPS SSL_ENABLE_NOTIFY
  97         SSL_NOTIFICATION_TIME TELNET_ENABLE TELNET_PORT_NUM
  98         TERMINAL_DIRECT_CONNECT TERMINAL_ENCODING TEXT_CONSOLE_TIMEOUT
  99         TFTP_ADDR_FIRMWARE TFTP_ADDR_REBOOT TFTP_FIRMWARE_FILE TFTP_REBOOT_FILE
 100         TXT_REMOTE_CONSOLE_COLOR_MAP TXT_REMOTE_CONSOLE_FREQ
 101         USB_DEVICE_SETTINGS USE_SERVER_IP_ADDRESS USER_TIMEOUT VENDOR
 102         RMC_AUTODETECT RMC_FUNCTIONS RMC_MODULES AGENT_VERSION BIOS_VER
 103         BOARD_MFT BOARD_MODEL BOARD_PART_NUM BOARD_SERIAL BOARD_VER CAB_MFT
 104         CAB_MODEL CAB_PROD_NUM CAB_PROD_VER CAB_SERIAL CHA_MODEL
 105         CSV_ConfAlarmMailFrom CSV_ConfAlarmMailMessage CSV_ConfAlarmMailSubject
 106         CSV_ConfAlarmMailType CSV_ConfAlarmMailUserInfo0
 107         CSV_ConfAlarmMailUserInfo1 PER_USER_PAGING RMC_SEL_FILTER
 108         SERVER_AD_NAME SERVER_AD_NAME2 SERVER_AD_NAME3 SERVER_AD_NAME4
 109         SERVER_CONTACT SERVER_DESCRIPTION SERVER_IP_ADDRESS SERVER_IP_ADDRESS2
 110         SERVER_IP_ADDRESS3 SERVER_IP_ADDRESS4 SERVER_IP_DHCP SERVER_IP_DHCP2
 111         SERVER_IP_DHCP3 SERVER_IP_DHCP4 SERVER_IP_GATEWAY SERVER_IP_GATEWAY2
 112         SERVER_IP_GATEWAY3 SERVER_IP_GATEWAY4 SERVER_IP_NETMASK
 113         SERVER_IP_NETMASK2 SERVER_IP_NETMASK3 SERVER_IP_NETMASK4
 114         SERVER_LOCATION SERVER_MAC_ADDRESS SERVER_MAC_ADDRESS2
 115         SERVER_MAC_ADDRESS3 SERVER_MAC_ADDRESS4 SERVER_MAX_LAN_ADAPTER
 116         SERVER_OS SERVER_OS_VENDOR);
 117
 118 sub _crc16 {
 119         my $str = shift;
 120         my $crc = 0;
 121         for my $k (0..length($str)-1) {
 122                 $crc ^= ord(substr($str, $k, 1)) << 8;
 123                 for (0..7) {
 124                         $crc = (($crc & 0x8000) == 32768 ? ($crc<<1) ^ 0x1021 : $crc<<1);
 125                 }
 126         }
 127         $crc = $crc & 0xFFFF;
 128         return $crc;
 129 }
 130
 131 sub _hash {
 132         my ($password, $challenge) = @_;
 133         my @challenge_bytes = unpack 'c16', decode_base64($challenge);
 134         my @pwd_hash            = unpack 'c16', md5($password);
 135         my @xor_bytes;
 136         for my $i (0..15) {
 137                 $xor_bytes[$i] = $challenge_bytes[$i] ^ $pwd_hash[$i];
 138         };
 139         my $hash = md5(pack 'c16', @xor_bytes);
 140         my $crc = _crc16($hash);
 141         $hash .= chr($crc & 0xff) . chr($crc >> 8 & 0xff);
 142         return encode_base64($hash, "");
 143 }
 144
 145 sub _req {
 146         my $xml = shift;
 147         $request = HTTP::Request->new(POST => "http://${host}/cgi/bin");
 148         $request->header(Cookie => "sid=$sid");
 149         $request->content_type('application/x-www-form-urlencoded');
 150         $request->content($xml);
 151         $response = $ua->request($request);
 152         die("Error in request: " . $response->status_line . "\n") unless ($response->is_success);
 153         XMLin($response->content);
 154 }
 155
 156 sub _getprop {
 157         my $property = shift;
 158
 159         my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="propget"><PROPLIST><PROP NAME="'.$property.'"/></PROPLIST></REQ></RMCSEQ>';
 160         my $resp = _req($reqstr);
 161
 162         if ($resp->{RESP}->{RC} ne '0x0') {
 163                 $resp->{RESP}->{RC};
 164         } else {
 165                 $resp;
 166         }
 167 }
 168
 169 sub logout {
 170         print "Logout\n";
 171         my $request = HTTP::Request->new(GET => "http://${host}/cgi/logout");
 172         $request->header(Cookie => "sid=$sid");
 173         my $response = $ua->request($request);
 174         die("While trying to logout: " . $response->status_line . "\n") unless ($response->is_success);
 175
 176         my $xmlin = XMLin($response->decoded_content);
 177         die "Error logging out: ".$xmlin->{RC} if ($xmlin->{RC} ne '0x0');
 178 }
 179
 180 sub setprop {
 181         my $property = shift;
 182         my $value = shift;
 183
 184         my $oldval = _getprop($property)->{RESP}->{PROPLIST}->{PROP}->{VAL};
 185
 186         if ($value eq $oldval) {
 187                 #print "${property} is already ${value}\n";
 188                 return;
 189         }
 190
 191         my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="propset"><PROP NAME="'.$property.'"><VAL>'.$value.'</VAL></PROP></REQ></RMCSEQ>';
 192         my $res = _req($reqstr);
 193
 194         if ($res->{RESP}->{RC} ne '0x0') {
 195                 print "Error setting ${property} to ${value}: ".$res->{RESP}->{RC}."\n";
 196         } else {
 197                 print "${property}: ${oldval} -> ${value}\n";
 198         }
 199 }
 200
 201 sub serveraction {
 202         my $action = shift;
 203
 204         my $pmode = 2;
 205
 206         setprop("SERVER_HARD_RESET_VIA_IPMI", "FALSE");
 207         setprop("SERVER_POWER_CHANGE_VIA_IPMI", "FALSE");
 208         #PM Mode
 209         setprop("SERVER_POWER_ON_MODE", sprintf("0x%x", $pmode));
 210         setprop("SERVER_POWER_OFF_MODE", sprintf("0x%x", $pmode));
 211
 212         print "${action}...\n";
 213         my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="serveraction"><ACT>'.$action.'</ACT></REQ></RMCSEQ>';
 214         my $res = _req($reqstr);
 215
 216         if ($res->{RESP}->{RC} ne '0x0') {
 217                 print "FAILED:".$res->{RESP}->{RC}."\n";
 218         }
 219 }
 220
 221 sub powerup {
 222         setprop("SERVER_POWER_ON_PULSE_MS", sprintf("0x%x", $poweronms));
 223         setprop("SERVER_POWER_OFF_PULSE_MS", "0x0");
 224         serveraction("powercycle");
 225 }
 226
 227 sub powerdown {
 228         setprop("SERVER_POWER_ON_PULSE_MS", "0x0");
 229         setprop("SERVER_POWER_OFF_PULSE_MS", sprintf("0x%x", $poweroffms));
 230         serveraction("powercycle");
 231 }
 232
 233 sub powercycle {
 234         setprop("SERVER_POWER_ON_PULSE_MS", sprintf("0x%x", $poweronms));
 235         setprop("SERVER_POWER_OFF_PULSE_MS", sprintf("0x%x", $poweroffms));
 236         serveraction("powercycle");
 237 }
 238
 239 sub showprop {
 240         my $property = shift;
 241
 242         my $phash = _getprop($property)->{RESP}->{PROPLIST}->{PROP};
 243
 244         print "${property}: " . ${phash}->{VAL} . " (" . ${phash}->{PERMS} . ")\n";
 245 }
 246
 247 sub board_properties {
 248         my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="boardpropget"><PROPLIST><PROP NAME=""/></PROPLIST></REQ></RMCSEQ>';
 249         my $resp = _req($reqstr);
 250
 251         print " * Board Properties:\n";
 252         foreach my $bprop (@{$resp->{RESP}->{BPROPLIST}->{BPROP}}) {
 253                 print " * " . ${bprop}->{NAME} . ": " . ${bprop}->{VAL} . "\n";
 254         }
 255 }
 256
 257 sub show_boarddesc {
 258         my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="boardpropget"><BPROPLIST><BPROP NAME="BOARD_DESCRIPTION"/></BPROPLIST></REQ></RMCSEQ>';
 259         my $boarddesc64 = _req($reqstr)->{RESP}->{BPROPLIST}->{BPROP}->{VAL};
 260         my $boarddesc = decode_base64($boarddesc64);
 261         my @board = split(//, $boarddesc);
 262         foreach my $byte (@board) {
 263                 printf ("0x%02x ", ord($byte));
 264 }
 265 print "\n";
 266 }
 267
 268 sub show_all_vars {
 269         foreach my $fwvar (@fw_vars) {
 270                 showprop($fwvar);
 271         }
 272 }
 273
 274 sub syslog_debug {
 275         my $destination_ip = shift;
 276         my $bcast = shift;
 277
 278         $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="dbgmsglancfg"><IP>'.${destination_ip}.'</IP><BCAST>'.${bcast}.'</BCAST><STORE>FALSE</STORE></REQ></RMCSEQ>';
 279         $res = _req($reqstr);
 280         if ($res->{RESP}->{RC} ne '0x0') {
 281                 print "FAILED:".$res->{RESP}->{RC}."\n";
 282                 return;
 283         }
 284
 285         $reqstr='<?XML version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="dbgmsgcfg"><ON>TRUE</ON><CHANNELMASK>0x1</CHANNELMASK><MMASK>0x1</MMASK><STORE>FALSE</STORE></REQ></RMCSEQ>';
 286         $res = _req($reqstr);
 287         if ($res->{RESP}->{RC} ne '0x0') {
 288                 print "FAILED:".$res->{RESP}->{RC}."\n";
 289                 return;
 290         }
 291
 292         print "Debug messages will be sent to ${destination_ip} (broadcast: ${bcast})\n";
 293 }
 294
 295 sub login {
 296         my $user = shift;
 297         my $pass = shift;
 298
 299         my $response = $ua->get("http://${host}/cgi/challenge");
 300         die $response->status_line if (!($response->is_success));
 301
 302         my $xmlin = XMLin($response->decoded_content);
 303         die "Error getting Challenge: ".$xmlin->{RC} if ($xmlin->{RC} ne '0x0');
 304         my $challenge = $xmlin->{CHALLENGE};
 305         print "Challenge: ${challenge}\n";
 306
 307         $sid = $response->headers->header('Set-Cookie');
 308         die "No SessionID!" if (!defined($sid));
 309         chomp($sid);
 310         $sid =~ s/.*sid=(.*);.*/$1/;
 311         print "SID: ${sid}\n";
 312
 313         my $login_hash = _hash($pass, $challenge);
 314         print "Hash: ${login_hash}\n";
 315
 316         my $request = HTTP::Request->new(GET => "http://${host}/cgi/login?user=${user}&hash=${login_hash}");
 317         $request->header(Cookie => "sid=$sid");
 318         $response = $ua->request($request);
 319         die("While trying to login: " . $response->status_line . "\n") unless ($response->is_success);
 320
 321         $xmlin = XMLin($response->decoded_content);
 322         die "Error logging in: ".$xmlin->{RC} if ($xmlin->{RC} ne '0x0');
 323
 324         $sid;
 325 }
 326
 327 open(INIFILE,"<$ENV{HOME}/.rsbs2rc") || die("can't open config: $ENV{HOME}/.rsbs2rc: $!");
 328 my %Config = ();
 329 my @sections = ();
 330 while(<INIFILE>) {
 331         chomp;
 332
 333         next if (m/^#/);
 334
 335         if (m/^\s*\[(.*)\]\s*$/) {
 336                 push @sections, $1;
 337                 next;
 338         }
 339
 340         if (@sections) {
 341                 if (m/^\s*(.+)\s*=\s*(.*)\s*$/) {
 342                         ${$Config{$sections[$#sections]}}{$1} = $2;
 343                 }
 344         }
 345 }
 346 close(INIFILE);
 347
 348 $host = ${$Config{$sections[0]}}{"host"};
 349 $poweronms = ${$Config{$sections[0]}}{"poweronms"} if (defined(${$Config{$sections[0]}}{"poweronms"}));
 350 $poweroffms = ${$Config{$sections[0]}}{"poweroffms"} if (defined(${$Config{$sections[0]}}{"poweroffms"}));
 351
 352 $sid = login(${$Config{$sections[0]}}{"user"}, ${$Config{$sections[0]}}{"pass"});
 353
 354 show_boarddesc();
 355
 356 #showprop("FP_REMOTE_POWER");
 357 #showprop("FP_REMOTE_BOOT");
 358 #showprop("SERVER_HARD_RESET_VIA_IPMI");
 359 #showprop("SERVER_HARD_RESET_PULSE_MS");
 360 #showprop("SERVER_POWER_CHANGE_VIA_IPMI");
 361 #showprop("SERVER_POWER_ON_MODE");
 362 #showprop("SERVER_POWER_ON_PULSE_MS");
 363 #showprop("SERVER_POWER_OFF_MODE");
 364 #showprop("SERVER_POWER_OFF_PULSE_MS");
 365
 366 board_properties();
 367
 368 #show_all_vars();
 369
 370 syslog_debug("255.255.255.255", "TRUE");
 371
 372 #Power Mgmt. Pane
 373 setprop("FP_REMOTE_POWER", "TRUE");
 374
 375 #server_power_on modes: (com/agilent/rmc/mgui/panels/PowerMgmtConf.class)
 376 #0: l_pmconf_option_disabled
 377 #1: l_pmconf_option_atx
 378 #2: l_pmconf_option_relay
 379 #default: disabled
 380
 381
 382 #$reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="boardpropset"><BPROP NAME="BOARD_DESCRIPTION"><VAL>'.$boarddesc_new.'</VAL></BPROP></REQ></RMCSEQ>';
 383 #print $reqstr."\n";
 384 #print Dumper(_req($reqstr));
 385
 386 serveraction("hardreset");
 387 powerup();
 388 powerdown();
 389 powercycle();
 390
 391 logout();