Firmware for RSB S2:
- * http://support.fujitsu-siemens.de/Download/ShowDescription.asp?SoftwareGUID=6DB401B3-B0BD-43CB-A3AA-6278B23FBCB0
- * http://support.fujitsu-siemens.de/Download/ShowDescription.asp?SoftwareGUID=4EC6401E-CA1A-47D8-A178-C75D91665CE2
+ * http://support.ts.fujitsu.com/Download/ShowDescription.asp?SoftwareGUID=6DB401B3-B0BD-43CB-A3AA-6278B23FBCB0
+ * http://support.ts.fujitsu.com/Download/ShowDescription.asp?SoftwareGUID=4EC6401E-CA1A-47D8-A178-C75D91665CE2
Use the first link for a patchable firmware, the second is just an "update"
firmware which will not touch user settings and rights...
* http://cp.literature.agilent.com/litweb/pdf/5988-8686EN.pdf
Software:
- * http://download.fujitsu-siemens.com/prim_supportcd/start.html
- * http://download.fujitsu-siemens.com/prim_supportcd/SVSSoftware/Software/Deployment/PRIMERGY%20Scripting/PRIMERGY%20Scripting%20Toolkit.msi
+ * http://download.ts.fujitsu.com/prim_supportcd/start.html
+ * http://download.ts.fujitsu.com/prim_supportcd/SVSSoftware/Software/Deployment/PRIMERGY%20Scripting/PRIMERGY%20Scripting%20Toolkit.msi
(DOS utilities (spman.exe))
+
+How to flash:
+ * Download the firmware from:
+ http://support.ts.fujitsu.com/Download/ShowDescription.asp?SoftwareGUID=6DB401B3-B0BD-43CB-A3AA-6278B23FBCB0
+ * Extract the .exe file with unzip
+ * Place RSB_S2.bin, RSB_S2.001 and RSB_S2_SINGLE.bin in the tftpboot
+ directory. Make sure that all three files are readable!
+ * Initiate the firmware-upgrade from the web interface:
+ - When upgrading from 6.x, flash the RSB_S2.bin file, which
+ will automatically load the RSB_S2.001 file in the process
+ - When upgrading from 7.x, flash the RSB_S2_SINGLE.bin
+ WARNING: NEVER FLASH THE .001 FILES DIRECTLY, THIS WILL BRICK YOUR BOARD!
+ * Modify RSB_S2_SINGLE.bin with 'firmware' and reflash ;-)
+ (Don't try to modify the other files)
+
+Linux notes:
+ * Disable ipmi_si:
+ echo "blacklist ipmi_si" >/etc/modprobe.d/rsbs2.conf
+ If you don't do this, the bootup process will take a long time but finally
+ succeed.
+ * Install required perl packages:
+ apt-get install libwww-perl libxml-simple-perl libcrypt-ssleay-perl
+
+Session timeouts:
+ * Sessions on the RSBS2 card have a very long timeout of 600 minutes.
+ To change this timeout to (for example) 120 minutes, change the
+ SESSION_MANAGER_SESSION_TIMEOUT to 0x78:
+ $ ./rsbs2.pl -s SESSION_MANAGER_SESSION_TIMEOUT=0x78 name_of_board
+
+Pinout:
+ +---------------+---------------+--------------------------------------+---+-
+ | | 2 4 6 8 A C E | | 1 |
+ | | 1 3 5 7 9 B D | | 2 |
+ | +-----+ +------ ------+ +---------+ +-----+ +---+
+ | | 1 2 | CONN2 | IPMB4 | |IPMB3| J1
+ | | 3 4 | +---------+ +-----+
+ + 5 6 | +---------+
+ USB | 7 8 | | 1 2 3 |
+ | 9 A | +---------+
+ + +-----+ CONN3
+ | CONN1
+ |
+ .
+ .
+ .
+ + +---+
+ PWR | 1 |
+ | 2 |J2
+ + +---+
+ | +-------------+ +-+
+ | | | | |
+ +---+ +------------+ +-------
+
+CONN1: CONN2: CONN3: J1: Repair mode enable
+ 1) 1) ATX-PWR +* 1) J2: Standby power enable
+ 2) 2) ATX-PWR GND* 2)
+ 3) USB D- 3) ATX-PWR +* 3)
+ 4) 4) ATX-PWR GND*
+ 5) USB D+ 5) ATX-RESET +*
+ 6) 6) ATX-RESET GND*
+ 7) USB GND 7) ATX-RESET +*
+ 8) 8) ATX-RESET GND*
+ 9) 9) PWR-SW
+ A) A) PWR-SW
+ B) RESET-SW
+ C) RESET-SW
+ D)
+ E)
+
+*) use to connect to the front panel button and pinheader on the mainboard,
+ beware of the polarity!
projects / rsbs2 / blobdiff