retrieve userlist, so user properties can bes saved and restored, too

[rsbs2] / rsbs2.pl

diff --git a/rsbs2.pl b/rsbs2.pl
index ee813f8f3558861f332022828eb1702fea5bac53..3b752c21187832fe1312c7479f5f4a989a6cbbda 100755 (executable)
--- a/rsbs2.pl
+++ b/rsbs2.pl
@@ -15,7 +15,7 @@ my $verbose = 0;
 
 my @fw_vars = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX GATEWAY
        IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE ENABLE_DHCP
-       ENABLE_DNS DNS_SERVER DNS_DOMAIN_NAME DHCP_CONFIGURE_DNS
+       ENABLE_DNS DNS_SERVER DNS_DOMAIN_NAME
        ACCESS_CONTROL_SERVER_1 ACCESS_CONTROL_SERVER_2 ACCESS_CONTROL_SERVERS
        ACPI_DISABLE_BIOS_SCAN ACPI_FORCE_RSDP_ADDRESS ACPI_FORCE_RSDT_ADDRESS
        ACPI_RSDP_BIOS_ROM_ADDRESS ACPI_SCAN_DELAY_SECONDS AMR_AUTH_METHOD
@@ -35,10 +35,10 @@ my @fw_vars = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX GATEWAY
        CONSOLE_VIDEO_PARAM_MODE CONTACT CONTACT_PHONE CRIT_TEMP_SHUTDOWN
        CRIT_VOLT_SHUTDOWN DHCP_ADD_EXTENSION DHCP_ADD_SERIAL
        DHCP_CONFIGURE_DNS DHCP_HOSTNAME_EXT DHCP_SERVER DHCP_USE_CARDNAME
-       DIAG_URL DNS_DOMAIN_NAME DNS_SERVER ENABLE_ANON_IPMI ENABLE_ANON_PCI
+       DIAG_URL ENABLE_ANON_IPMI ENABLE_ANON_PCI
        ENABLE_ANON_WEB ENABLE_AVR_CHIP_DETECT ENABLE_BMC_AUTODETECT
        ENABLE_BMC_TIMESYNC ENABLE_CRTC_FETCH ENABLE_DHCP ENABLE_DHCP_HOSTNAME
-       ENABLE_DNS ENABLE_DS_CONNECTIVITY ENABLE_IO_UART_DECODER ENABLE_LAN_100
+       ENABLE_DS_CONNECTIVITY ENABLE_IO_UART_DECODER ENABLE_LAN_100
        ENABLE_LAN_AUTONEG ENABLE_LAN_FDUPLEX ENABLE_MEM_UART_DECODER
        ENABLE_PPP ENABLE_REMOTE_FLOPPY_BOOT ENABLE_SELF_DELETE
        ENABLE_SERIAL_DBG ETHDRIVER_SID EXPROM_BANNER EXPROM_EBDA_COMPATIBILITY
@@ -151,7 +151,7 @@ sub _req {
        $request->content($xml);
        $response = $ua->request($request);
        die("Error in request: " . $response->status_line . "\n") unless ($response->is_success);
-       XMLin($response->content);
+       XMLin($response->content, SuppressEmpty => '');
 }
 
 sub _getprop {
@@ -196,8 +196,10 @@ sub setprop {
 
        if ($res->{RESP}->{RC} ne '0x0') {
                print "Error setting ${property} to ${value}: ".$res->{RESP}->{RC}."\n";
+               undef;
        } else {
-               print "${property}: ${oldval} -> ${value}\n";
+               print "${property}: ${oldval} -> ${value}\n" if ($verbose);
+               $oldval;
        }
 }
 
@@ -277,6 +279,22 @@ sub show_all_vars {
        }
 }
 
+sub usrlist {
+       my $reqstr = '<?XML version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="usrlist"></REQ></RMCSEQ>';
+       my $res = _req($reqstr);
+       my @users = ();
+
+       if ($res->{RESP}->{RC} ne '0x0') {
+               print "FAILED:".$res->{RESP}->{RC}."\n";
+               ();
+       } else {
+               foreach my $usr (@{$res->{RESP}->{USRLIST}->{USER}}) {
+                       push @users, $usr->{NAME};
+               }
+       }
+       @users;
+}
+
 sub syslog_debug {
        my $destination_ip = shift;
        my $bcast = shift;
@@ -480,15 +498,21 @@ if (@gprop) {
 if (@sprop) {
        foreach my $p (@sprop) {
                (my $pr, $v) = split(/=/,$p,2);
-               setprop($pr, $v);
+               my $oldval = setprop($pr, $v);
+               if (defined($oldval)) {
+                       print "${pr}: ${oldval} -> ${v}\n" if (!$verbose);
+               }
        }
 }
 
 if ($save ne '') {
-       my @dontsave = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX GATEWAY
-               IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE ENABLE_DHCP);
+       my @dontsave = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX
+       GATEWAY IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE
+       ENABLE_DHCP MAC_ADDRESS LAST_CARD_NAME LAST_ENABLE_DHCP LAST_GATEWAY
+       LAST_IP_ADDRESS LAST_NETMASK);
 
        open (SAVEFILE, ">${save}") || die "Error opening save-file: $!\n";
+       print STDERR "saving" if (!$verbose);
        foreach my $ts (@fw_vars) {
                next if (grep(/^${ts}$/, @dontsave));
 
@@ -496,18 +520,30 @@ if ($save ne '') {
                next if ($phash->{PERMS} ne 'RW');
                
                print SAVEFILE "${ts}=".$phash->{VAL}."\n";
+               print STDERR "." if (!$verbose);
+       }
+       foreach my $usr (usrlist()) {
+               print STDERR "TODO: save user ${usr}\n";
        }
        close(SAVEFILE);
+       print STDERR "done\n" if (!$verbose);
 }
 
 if ($load ne '') {
        open (LOADFILE, "<${load}") || die "Error opening load-file: $!\n";
+       print STDERR "loading" if (!$verbose);
        while(<LOADFILE>) {
                chomp;
                (my $p, my $v) = split(/=/, $_);
                setprop($p, $v);
+               print STDERR "." if (!$verbose);
        }
        close(LOADFILE);
+       print STDERR "done\n" if (!$verbose);
+       print "Settings loaded, resetting board...\n";
+       my $reqstr='<?XML version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="boardreset"></REQ></RMCSEQ>';
+       _req($reqstr);
+       exit(0);
 }
 
 if ($enable_debug ne '') {