add information about session timeouts to readme

[rsbs2] / README.txt

diff --git a/README.txt b/README.txt
index 46d1217e8e845e02c76b6e16753020c92860ab4a..d9a21e34600e03a3cdee4724e9b0a0c508fe5d7c 100644 (file)
--- a/README.txt
+++ b/README.txt
@@ -1,6 +1,6 @@
 Firmware for RSB S2:
- * http://support.fujitsu-siemens.de/Download/ShowDescription.asp?SoftwareGUID=6DB401B3-B0BD-43CB-A3AA-6278B23FBCB0
- * http://support.fujitsu-siemens.de/Download/ShowDescription.asp?SoftwareGUID=4EC6401E-CA1A-47D8-A178-C75D91665CE2
+ * http://support.ts.fujitsu.com/Download/ShowDescription.asp?SoftwareGUID=6DB401B3-B0BD-43CB-A3AA-6278B23FBCB0
+ * http://support.ts.fujitsu.com/Download/ShowDescription.asp?SoftwareGUID=4EC6401E-CA1A-47D8-A178-C75D91665CE2
 Use the first link for a patchable firmware, the second is just an "update"
 firmware which will not touch user settings and rights...
 
@@ -10,13 +10,13 @@ Documentation:
  * http://cp.literature.agilent.com/litweb/pdf/5988-8686EN.pdf
 
 Software:
- * http://download.fujitsu-siemens.com/prim_supportcd/start.html
- * http://download.fujitsu-siemens.com/prim_supportcd/SVSSoftware/Software/Deployment/PRIMERGY%20Scripting/PRIMERGY%20Scripting%20Toolkit.msi
+ * http://download.ts.fujitsu.com/prim_supportcd/start.html
+ * http://download.ts.fujitsu.com/prim_supportcd/SVSSoftware/Software/Deployment/PRIMERGY%20Scripting/PRIMERGY%20Scripting%20Toolkit.msi
    (DOS utilities (spman.exe))
 
 How to flash:
  * Download the firmware from:
-   http://support.fujitsu-siemens.de/Download/ShowDescription.asp?SoftwareGUID=6DB401B3-B0BD-43CB-A3AA-6278B23FBCB0
+   http://support.ts.fujitsu.com/Download/ShowDescription.asp?SoftwareGUID=6DB401B3-B0BD-43CB-A3AA-6278B23FBCB0
  * Extract the .exe file with unzip
  * Place RSB_S2.bin, RSB_S2.001 and RSB_S2_SINGLE.bin in the tftpboot
    directory. Make sure that all three files are readable!
@@ -30,12 +30,18 @@ How to flash:
 
 Linux notes:
  * Disable ipmi_si:
-   echo "blacklist ipmi_si" >/etc/modprobe.d/rsbs2
+   echo "blacklist ipmi_si" >/etc/modprobe.d/rsbs2.conf
    If you don't do this, the bootup process will take a long time but finally
    succeed.
  * Install required perl packages:
    apt-get install libwww-perl libxml-simple-perl libcrypt-ssleay-perl
 
+Session timeouts:
+ * Sessions on the RSBS2 card have a very long timeout of 600 minutes.
+   To change this timeout to (for example) 120 minutes, change the
+   SESSION_MANAGER_SESSION_TIMEOUT to 0x78:
+   $ ./rsbs2.pl -s SESSION_MANAGER_SESSION_TIMEOUT=0x78 name_of_board
+
 Pinout:
   +---------------+---------------+--------------------------------------+---+-
   |               | 2 4 6 8 A C E |                                      | 1 |