print out all settings and board variables

diff --git a/rsbs2 b/rsbs2
index 7591fb7c9368d96e5706dbbefe22cec1cf978acc..91027590ee2a4fba3a822df41c61e5d7ccf9fd6a 100755 (executable)
--- a/rsbs2
+++ b/rsbs2
@@ -13,6 +13,109 @@ my $host = "192.168.50.6";
 my $user = "admin";
 my $pass = "admin";
 
+my @fw_vars = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX GATEWAY
+       IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE ENABLE_DHCP
+       ENABLE_DNS DNS_SERVER DNS_DOMAIN_NAME DHCP_CONFIGURE_DNS
+       ACCESS_CONTROL_SERVER_1 ACCESS_CONTROL_SERVER_2 ACCESS_CONTROL_SERVERS
+       ACPI_DISABLE_BIOS_SCAN ACPI_FORCE_RSDP_ADDRESS ACPI_FORCE_RSDT_ADDRESS
+       ACPI_RSDP_BIOS_ROM_ADDRESS ACPI_SCAN_DELAY_SECONDS AMR_AUTH_METHOD
+       AMR_DISABLE_PCI AMR_ENABLE_ISCSI_TIMEOUT AMR_ENABLED AMR_HOST_INTERFACE
+       AMR_SERVER_LIST AMR_USB_FDD_CBI_UFI_TRANSPORT AMR_USB_R2T_TIMEOUT_MSEC
+       AVR_4BIT_ACTION AVR_4BIT_SAMPLE_TIME AVR_ARCHITECTURE AVR_CHIP_TYPE
+       AVR_CLIENT_LANGUAGE AVR_DISABLE_SVR_MOUSE_ON_SESSION_START
+       AVR_KB_VERSION AVR_MAX_SESSION_COUNT AVR_MOUSE_ACCELERATION
+       AVR_MOUSE_MAX_STEP_SIZE AVR_NUMB_MOUSE_PACKETS
+       AVR_PCI_PATTERN_HANDS_OFF_ENABLED AVR_PREF_KB_STICKY_KEY_MODE_ON
+       AVR_PREF_KB_TYPING_MODE_ON AVR_PREF_KB_WARN_UNID_EV
+       AVR_REGISTERS_BASE_ADDR AVR_RESET_PAUSE AVR_SCREEN_REFRESH
+       AVR_SUPPORTED_CHIP AVR_TILE_TIMEOUT AVR_VIDEO_MEM_BASE_ADDR BAUDRATE
+       BAUDRATE_MODEM BAUDRATE_PPP BMC_SUPPORTS_GRACEFULL
+       BMC_TIMESYNC_INTERVAL CARD_NAME CONSOLE_IPMI_MOUSE_BYTE_TIME
+       CONSOLE_KEYBOARD_ACCESS_MODE CONSOLE_MOUSE_ACCESS_MODE
+       CONSOLE_VIDEO_PARAM_MODE CONTACT CONTACT_PHONE CRIT_TEMP_SHUTDOWN
+       CRIT_VOLT_SHUTDOWN DHCP_ADD_EXTENSION DHCP_ADD_SERIAL
+       DHCP_CONFIGURE_DNS DHCP_HOSTNAME_EXT DHCP_SERVER DHCP_USE_CARDNAME
+       DIAG_URL DNS_DOMAIN_NAME DNS_SERVER ENABLE_ANON_IPMI ENABLE_ANON_PCI
+       ENABLE_ANON_WEB ENABLE_AVR_CHIP_DETECT ENABLE_BMC_AUTODETECT
+       ENABLE_BMC_TIMESYNC ENABLE_CRTC_FETCH ENABLE_DHCP ENABLE_DHCP_HOSTNAME
+       ENABLE_DNS ENABLE_DS_CONNECTIVITY ENABLE_IO_UART_DECODER ENABLE_LAN_100
+       ENABLE_LAN_AUTONEG ENABLE_LAN_FDUPLEX ENABLE_MEM_UART_DECODER
+       ENABLE_PPP ENABLE_REMOTE_FLOPPY_BOOT ENABLE_SELF_DELETE
+       ENABLE_SERIAL_DBG ETHDRIVER_SID EXPROM_BANNER EXPROM_EBDA_COMPATIBILITY
+       EXPROM_ENTRY EXPROM_EXIT_DELAY_SEC EXPROM_F3_DELAY_SEC
+       EXPROM_INT13_COMPATIBILITY EXPROM_SETUP_BANNER FIRMWARE_REVISION
+       FP_ACDC FP_AMR FP_AVR_ASR FP_AVR_GRAPHIC_CONSOLE FP_AVR_TEXT_CONSOLE
+       FP_AVRMANCONF_4BIT_SAMPLE FP_AVRMANCONF_ACCESS_MODES FP_AVRMANCONF_CHIP
+       FP_AVRMANCONF_MOUSE_ACCELERATION FP_AVRMANCONF_MOUSE_TYPE
+       FP_AVRMANCONF_RESET_PAUSE FP_AVRMANCONF_SCREEN_REFRESH FP_BATTERY
+       FP_BOARDRESET_BUTTON FP_COMREDIRECT FP_F3_PPP FP_I2C FP_ICMB FP_INSTR
+       FP_INTERNAL_LAN FP_KEY_CONSOLE FP_LAN_SPEED
+       FP_LAST_BOARD_POWER_WARNING_ENABLED FP_NO_BLADE_PANEL
+       FP_NO_CARDCONF_PANEL FP_NO_DIAG_PANEL FP_NO_DSAUTHCONF_PANEL
+       FP_NO_MANAGE_PANEL FP_NO_MEMORY_PANEL FP_NO_SENSOR_PANEL
+       FP_NO_SERVERCONF_PANEL FP_NO_SSL_PANEL FP_NO_SYSLOG_PANEL
+       FP_NO_USERCONF_PANEL FP_PAGING_EMAIL FP_PAGING_SERIAL FP_PAGING_SNMP
+       FP_PCI_CONFIG FP_PPP FP_PROP_BAUDRATE_REQBOOT FP_PROP_PPP_INIT_REQBOOT
+       FP_PROP_PS_REQBOOT FP_PROP_TERM_DIRECT_CONNECT_REQBOOT FP_REMOTE_BOOT
+       FP_REMOTE_DISK FP_REMOTE_POWER FP_SAC_CONSOLE FP_SEL FP_SENSOR_HISTORY
+       FP_SEQ_SEL FP_SERVER_POWER FP_SERVER_REBOOT FP_SERVER_RESET
+       FP_SERVER_SHUTDOWN FP_SMM FP_SSL FP_STATUS_DIAG_PANEL
+       FP_STATUS_MEMORY_PANEL FP_STATUS_PCI_CONFIG FP_STATUS_SAC_CONSOLE
+       FP_SYSTEM_LAN FP_TEXT_ASR FP_TEXT_CONSOLE FP_TUI FP_VERSION FP_VGA_ASR
+       FP_VGA_CONSOLE FP_VT100_CONSOLE GATEWAY GATEWAY_MAC
+       GRATUITOUS_ARP_INTERVAL HELP_LOCATION HIST0_SAMPLE_TIME HIST0_SENSOR_ID
+       HIST1_SAMPLE_TIME HIST1_SENSOR_ID HIST2_SAMPLE_TIME HIST2_SENSOR_ID
+       HIST3_SAMPLE_TIME HIST3_SENSOR_ID HTTP_PORT_NUM HTTP_SSL_PORT_NUM
+       I2C_ADDR_8BIT_CHASSIS_BMC I2C_ADDR_8BIT_MY_BMC I2C_ADDR_8BIT_THIS_CARD
+       INFOTXT_BPROP_ACCESS INFOTXT_DB_ACCESS IP_ADDRESS IP_ADDRESS_SOURCE
+       IPMB_RETRY_TIMEOUT IPMB_SEQ_NUM_TIMEOUT IPMB_TX_RETRIES
+       IPMI_COUNTRY_SELECT IPV4_HEADER_PARAMETERS ISCSI_DEVICE_VENDOR
+       ISCSI_PRODUCT_EMUL_BD ISCSI_PRODUCT_EMUL_CD ISCSI_PRODUCT_EMUL_FD
+       LAST_CARD_NAME LAST_ENABLE_DHCP LAST_GATEWAY LAST_IP_ADDRESS
+       LAST_NETMASK LOCATION MAC_ADDRESS MODEM_CONNECT MODEM_CONNECT2
+       MODEM_SEPARATOR NETMASK PAGE_RETRIES PAGE_RETRY_DELAY_SEC POST_ERRCODE
+       POST_PROP PPP_AVAILABLE PPP_INIT PPP_IP_ADDR PPP_NETMASK PPP_PORT
+       PPP_STATUS PPP_STAY_ALIVE_SECS PPP_WELCOME PPP2_BAUDRATE PPP2_INIT
+       PPP2_IP_ADDR PPP2_NETMASK PPP2_PORT PPP2_STAY_ALIVE_SECS PRODUCT
+       PRODUCT_ABBR PS_ASR PS_DISK PS_FAN PS_HARDWARE PS_MEMORY PS_NETWORK
+       PS_OTHER PS_POST PS_RMC PS_SECURITY PS_SYS_POWER PS_SYS_STATUS
+       PS_TEMPERATURE PS2_ADAPTER_POWER_UP_MODE PS2_FW_UPDATE_CMD
+       PS2_FW_UPDATE_IMG_NAME PS2_FW_UPDATE_STATUS RMC_DS_GROUP SAC_PORT
+       SERVER_CODEPAGE SERVER_HARD_RESET_PULSE_MS SERVER_HARD_RESET_VIA_IPMI
+       SERVER_ID SERVER_IP SERVER_KEYBOARD SERVER_KEYBOARD_LANGUAGES_LIST
+       SERVER_MEMORY SERVER_NAME SERVER_POWER_CHANGE_VIA_IPMI
+       SERVER_POWER_OFF_MODE SERVER_POWER_OFF_PULSE_MS SERVER_POWER_ON_MODE
+       SERVER_POWER_ON_PULSE_MS SERVER_TIMEZONE SERVER_URL
+       SESSION_MANAGER_SESSION_TIMEOUT SI_DEF_POLL_INTERVAL_MS
+       SI_DEF_POLL_OFFSET_MS SMTP_RESP_TIME_SEC SMTP_RETRIES
+       SMTP_RETRY_DELAY_SEC SMTP_REVERSE_PATH SMTP_SERVER SNMP_AGENT_ENABLED
+       SNMP_COMMUNITY SNMP_ENTERPRISE_ID SNMP_SERVER SNMP_SERVER_1
+       SNMP_SERVER_2 SNMP_SERVER_3 SNMP_SERVER_4 SNMP_SERVER_5 SNMP_SERVER_6
+       SNMP_SERVER_7 SNMP_SERVER_MAC SNMP_SYSOID SNMP_TRAP_MASK
+       SNMP_TRAP_VERSION SSL_40_OR_128_ENCRYPTION SSL_CAPABLE_FIRMWARE
+       SSL_ENABLE_ALOG SSL_ENABLE_ALOG_FALLBACK SSL_ENABLE_CLIENT_CERT
+       SSL_ENABLE_HTTP SSL_ENABLE_HTTPS SSL_ENABLE_NOTIFY
+       SSL_NOTIFICATION_TIME TELNET_ENABLE TELNET_PORT_NUM
+       TERMINAL_DIRECT_CONNECT TERMINAL_ENCODING TEXT_CONSOLE_TIMEOUT
+       TFTP_ADDR_FIRMWARE TFTP_ADDR_REBOOT TFTP_FIRMWARE_FILE TFTP_REBOOT_FILE
+       TXT_REMOTE_CONSOLE_COLOR_MAP TXT_REMOTE_CONSOLE_FREQ
+       USB_DEVICE_SETTINGS USE_SERVER_IP_ADDRESS USER_TIMEOUT VENDOR
+       RMC_AUTODETECT RMC_FUNCTIONS RMC_MODULES AGENT_VERSION BIOS_VER
+       BOARD_MFT BOARD_MODEL BOARD_PART_NUM BOARD_SERIAL BOARD_VER CAB_MFT
+       CAB_MODEL CAB_PROD_NUM CAB_PROD_VER CAB_SERIAL CHA_MODEL
+       CSV_ConfAlarmMailFrom CSV_ConfAlarmMailMessage CSV_ConfAlarmMailSubject
+       CSV_ConfAlarmMailType CSV_ConfAlarmMailUserInfo0
+       CSV_ConfAlarmMailUserInfo1 PER_USER_PAGING RMC_SEL_FILTER
+       SERVER_AD_NAME SERVER_AD_NAME2 SERVER_AD_NAME3 SERVER_AD_NAME4
+       SERVER_CONTACT SERVER_DESCRIPTION SERVER_IP_ADDRESS SERVER_IP_ADDRESS2
+       SERVER_IP_ADDRESS3 SERVER_IP_ADDRESS4 SERVER_IP_DHCP SERVER_IP_DHCP2
+       SERVER_IP_DHCP3 SERVER_IP_DHCP4 SERVER_IP_GATEWAY SERVER_IP_GATEWAY2
+       SERVER_IP_GATEWAY3 SERVER_IP_GATEWAY4 SERVER_IP_NETMASK
+       SERVER_IP_NETMASK2 SERVER_IP_NETMASK3 SERVER_IP_NETMASK4
+       SERVER_LOCATION SERVER_MAC_ADDRESS SERVER_MAC_ADDRESS2
+       SERVER_MAC_ADDRESS3 SERVER_MAC_ADDRESS4 SERVER_MAX_LAN_ADAPTER
+       SERVER_OS SERVER_OS_VENDOR);
+
 sub _crc16 {
        my $str = shift;
        my $crc = 0;
@@ -58,9 +161,9 @@ sub _getprop {
        my $resp = _req($reqstr);
        
        if ($resp->{RESP}->{RC} ne '0x0') {
-               "Error: " . $resp->{RESP}->{RC};
+               $resp->{RESP}->{RC};
        } else {
-               $resp->{RESP}->{PROPLIST}->{PROP}->{VAL};
+               $resp;
        }
 }
 
@@ -79,7 +182,7 @@ sub setprop {
        my $property = shift;
        my $value = shift;
 
-       my $oldval = _getprop($property);
+       my $oldval = _getprop($property)->{RESP}->{PROPLIST}->{PROP}->{VAL};
 
        if ($value eq $oldval) {
                print "${property} is already ${value}\n";
@@ -111,7 +214,25 @@ sub serveraction {
 sub showprop {
        my $property = shift;
 
-       print "${property}: " . _getprop($property) . "\n";
+       my $phash = _getprop($property)->{RESP}->{PROPLIST}->{PROP};
+
+       print "${property}: " . ${phash}->{VAL} . " (" . ${phash}->{PERMS} . ")\n";
+}
+
+sub board_properties {
+       my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="boardpropget"><PROPLIST><PROP NAME=""/></PROPLIST></REQ></RMCSEQ>';
+       my $resp = _req($reqstr);
+
+       print " * Board Properties:\n";
+       foreach my $bprop (@{$resp->{RESP}->{BPROPLIST}->{BPROP}}) {
+               print " * " . ${bprop}->{NAME} . ": " . ${bprop}->{VAL} . "\n";
+       }
+}
+
+sub show_all_vars {
+       foreach my $fwvar (@fw_vars) {
+               showprop($fwvar);
+       }
 }
 
 #Login...
@@ -150,15 +271,20 @@ foreach my $byte (@board) {
 print "\n";
 printf("byte 22: 0x%x\n", ord($board[22]));
 
-showprop("FP_REMOTE_POWER");
-showprop("FP_REMOTE_BOOT");
-showprop("SERVER_HARD_RESET_VIA_IPMI");
-showprop("SERVER_HARD_RESET_PULSE_MS");
-showprop("SERVER_POWER_CHANGE_VIA_IPMI");
-showprop("SERVER_POWER_ON_MODE");
-showprop("SERVER_POWER_ON_PULSE_MS");
-showprop("SERVER_POWER_OFF_MODE");
-showprop("SERVER_POWER_OFF_PULSE_MS");
+#showprop("FP_REMOTE_POWER");
+#showprop("FP_REMOTE_BOOT");
+#showprop("SERVER_HARD_RESET_VIA_IPMI");
+#showprop("SERVER_HARD_RESET_PULSE_MS");
+#showprop("SERVER_POWER_CHANGE_VIA_IPMI");
+#showprop("SERVER_POWER_ON_MODE");
+#showprop("SERVER_POWER_ON_PULSE_MS");
+#showprop("SERVER_POWER_OFF_MODE");
+#showprop("SERVER_POWER_OFF_PULSE_MS");
+#showprop("AGENT_VERSION");
+
+board_properties();
+
+show_all_vars();
 
 #server_power_on modes: (com/agilent/rmc/mgui/panels/PowerMgmtConf.class)
 #0: l_pmconf_option_disabled