]> git.zerfleddert.de Git - proxmark3-svn/blame - armsrc/lfops.c
Fix #912
[proxmark3-svn] / armsrc / lfops.c
CommitLineData
e09f21fa 1//-----------------------------------------------------------------------------
2// This code is licensed to you under the terms of the GNU GPL, version 2 or,
3// at your option, any later version. See the LICENSE.txt file for the text of
4// the license.
5//-----------------------------------------------------------------------------
6// Miscellaneous routines for low frequency tag operations.
779d9a0e 7// Tags supported here so far are Texas Instruments (TI), HID, EM4x05, EM410x
e09f21fa 8// Also routines for raw mode reading/simulating of LF waveform
9//-----------------------------------------------------------------------------
10
11#include "proxmark3.h"
12#include "apps.h"
13#include "util.h"
14#include "hitag2.h"
15#include "crc16.h"
16#include "string.h"
17#include "lfdemod.h"
18#include "lfsampling.h"
3606ac0a 19#include "protocols.h"
867e10a5 20#include "usb_cdc.h"
fc52fbd4 21#include "fpgaloader.h"
e09f21fa 22
23/**
24 * Function to do a modulation and then get samples.
25 * @param delay_off
26 * @param period_0
27 * @param period_1
28 * @param command
29 */
21a615cb 30void ModThenAcquireRawAdcSamples125k(uint32_t delay_off, uint32_t period_0, uint32_t period_1, uint8_t *command)
e09f21fa 31{
779d9a0e 32 // start timer
61e96805 33 StartTicks();
e09f21fa 34
779d9a0e 35 // use lf config settings
36 sample_config *sc = getSamplingConfig();
e09f21fa 37
2896e490 38 // Make sure the tag is reset
e09f21fa 39 FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
40 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
61e96805 41 WaitMS(2500);
e09f21fa 42
2896e490 43 // clear read buffer (after fpga bitstream loaded...)
44 BigBuf_Clear_keep_EM();
45
779d9a0e 46 // power on
47 LFSetupFPGAForADC(sc->divisor, 1);
e09f21fa 48
49 // And a little more time for the tag to fully power up
61e96805 50 WaitMS(2000);
51 // if delay_off = 0 then just bitbang 1 = antenna on 0 = off for respective periods.
52 bool bitbang = delay_off == 0;
e0165dcf 53 // now modulate the reader field
61e96805 54
55 if (bitbang) {
779d9a0e 56 // HACK it appears the loop and if statements take up about 7us so adjust waits accordingly...
61e96805 57 uint8_t hack_cnt = 7;
58 if (period_0 < hack_cnt || period_1 < hack_cnt) {
779d9a0e 59 DbpString("Warning periods cannot be less than 7us in bit bang mode");
61e96805 60 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
61 LED_D_OFF();
62 return;
63 }
779d9a0e 64
65 // hack2 needed--- it appears to take about 8-16us to turn the antenna back on
66 // leading to ~ 1 to 2 125khz samples extra in every off period
67 // so we should test for last 0 before next 1 and reduce period_0 by this extra amount...
68 // but is this time different for every antenna or other hw builds??? more testing needed
69
70 // prime cmd_len to save time comparing strings while modulating
61e96805 71 int cmd_len = 0;
72 while(command[cmd_len] != '\0' && command[cmd_len] != ' ')
73 cmd_len++;
74
75 int counter = 0;
76 bool off = false;
77 for (counter = 0; counter < cmd_len; counter++) {
61e96805 78 // if cmd = 0 then turn field off
79 if (command[counter] == '0') {
80 // if field already off leave alone (affects timing otherwise)
81 if (off == false) {
82 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
83 LED_D_OFF();
84 off = true;
85 }
779d9a0e 86 // note we appear to take about 7us to switch over (or run the if statements/loop...)
61e96805 87 WaitUS(period_0-hack_cnt);
88 // else if cmd = 1 then turn field on
89 } else {
90 // if field already on leave alone (affects timing otherwise)
91 if (off) {
779d9a0e 92 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
61e96805 93 LED_D_ON();
94 off = false;
95 }
779d9a0e 96 // note we appear to take about 7us to switch over (or run the if statements/loop...)
61e96805 97 WaitUS(period_1-hack_cnt);
98 }
99 }
100 } else { // old mode of cmd read using delay as off period
101 while(*command != '\0' && *command != ' ') {
102 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
103 LED_D_OFF();
104 WaitUS(delay_off);
779d9a0e 105 FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc->divisor);
61e96805 106 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
107 LED_D_ON();
108 if(*(command++) == '0') {
109 WaitUS(period_0);
110 } else {
111 WaitUS(period_1);
112 }
113 }
e0165dcf 114 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
115 LED_D_OFF();
61e96805 116 WaitUS(delay_off);
779d9a0e 117 FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc->divisor);
e0165dcf 118 }
e09f21fa 119
e0165dcf 120 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
e09f21fa 121
e0165dcf 122 // now do the read
b9957414 123 DoAcquisition_config(false, 0);
779d9a0e 124
125 // Turn off antenna
126 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
127 // tell client we are done
128 cmd_send(CMD_ACK,0,0,0,0,0);
e09f21fa 129}
130
e09f21fa 131/* blank r/w tag data stream
132...0000000000000000 01111111
1331010101010101010101010101010101010101010101010101010101010101010
1340011010010100001
13501111111
136101010101010101[0]000...
137
138[5555fe852c5555555555555555fe0000]
139*/
140void ReadTItag(void)
141{
e0165dcf 142 // some hardcoded initial params
143 // when we read a TI tag we sample the zerocross line at 2Mhz
144 // TI tags modulate a 1 as 16 cycles of 123.2Khz
145 // TI tags modulate a 0 as 16 cycles of 134.2Khz
e09f21fa 146 #define FSAMPLE 2000000
147 #define FREQLO 123200
148 #define FREQHI 134200
149
e0165dcf 150 signed char *dest = (signed char *)BigBuf_get_addr();
151 uint16_t n = BigBuf_max_traceLen();
152 // 128 bit shift register [shift3:shift2:shift1:shift0]
153 uint32_t shift3 = 0, shift2 = 0, shift1 = 0, shift0 = 0;
154
155 int i, cycles=0, samples=0;
156 // how many sample points fit in 16 cycles of each frequency
157 uint32_t sampleslo = (FSAMPLE<<4)/FREQLO, sampleshi = (FSAMPLE<<4)/FREQHI;
158 // when to tell if we're close enough to one freq or another
159 uint32_t threshold = (sampleslo - sampleshi + 1)>>1;
160
161 // TI tags charge at 134.2Khz
162 FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
163 FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
164
165 // Place FPGA in passthrough mode, in this mode the CROSS_LO line
166 // connects to SSP_DIN and the SSP_DOUT logic level controls
167 // whether we're modulating the antenna (high)
168 // or listening to the antenna (low)
169 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_PASSTHRU);
170
171 // get TI tag data into the buffer
172 AcquireTiType();
173
174 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
175
176 for (i=0; i<n-1; i++) {
177 // count cycles by looking for lo to hi zero crossings
178 if ( (dest[i]<0) && (dest[i+1]>0) ) {
179 cycles++;
180 // after 16 cycles, measure the frequency
181 if (cycles>15) {
182 cycles=0;
183 samples=i-samples; // number of samples in these 16 cycles
184
185 // TI bits are coming to us lsb first so shift them
186 // right through our 128 bit right shift register
187 shift0 = (shift0>>1) | (shift1 << 31);
188 shift1 = (shift1>>1) | (shift2 << 31);
189 shift2 = (shift2>>1) | (shift3 << 31);
190 shift3 >>= 1;
191
192 // check if the cycles fall close to the number
193 // expected for either the low or high frequency
194 if ( (samples>(sampleslo-threshold)) && (samples<(sampleslo+threshold)) ) {
195 // low frequency represents a 1
196 shift3 |= (1<<31);
197 } else if ( (samples>(sampleshi-threshold)) && (samples<(sampleshi+threshold)) ) {
198 // high frequency represents a 0
199 } else {
200 // probably detected a gay waveform or noise
201 // use this as gaydar or discard shift register and start again
202 shift3 = shift2 = shift1 = shift0 = 0;
203 }
204 samples = i;
205
206 // for each bit we receive, test if we've detected a valid tag
207
208 // if we see 17 zeroes followed by 6 ones, we might have a tag
209 // remember the bits are backwards
210 if ( ((shift0 & 0x7fffff) == 0x7e0000) ) {
211 // if start and end bytes match, we have a tag so break out of the loop
212 if ( ((shift0>>16)&0xff) == ((shift3>>8)&0xff) ) {
213 cycles = 0xF0B; //use this as a flag (ugly but whatever)
214 break;
215 }
216 }
217 }
218 }
219 }
220
221 // if flag is set we have a tag
222 if (cycles!=0xF0B) {
223 DbpString("Info: No valid tag detected.");
224 } else {
225 // put 64 bit data into shift1 and shift0
226 shift0 = (shift0>>24) | (shift1 << 8);
227 shift1 = (shift1>>24) | (shift2 << 8);
228
229 // align 16 bit crc into lower half of shift2
230 shift2 = ((shift2>>24) | (shift3 << 8)) & 0x0ffff;
231
232 // if r/w tag, check ident match
e09f21fa 233 if (shift3 & (1<<15) ) {
e0165dcf 234 DbpString("Info: TI tag is rewriteable");
235 // only 15 bits compare, last bit of ident is not valid
e09f21fa 236 if (((shift3 >> 16) ^ shift0) & 0x7fff ) {
e0165dcf 237 DbpString("Error: Ident mismatch!");
238 } else {
239 DbpString("Info: TI tag ident is valid");
240 }
241 } else {
242 DbpString("Info: TI tag is readonly");
243 }
244
245 // WARNING the order of the bytes in which we calc crc below needs checking
246 // i'm 99% sure the crc algorithm is correct, but it may need to eat the
247 // bytes in reverse or something
248 // calculate CRC
249 uint32_t crc=0;
250
251 crc = update_crc16(crc, (shift0)&0xff);
252 crc = update_crc16(crc, (shift0>>8)&0xff);
253 crc = update_crc16(crc, (shift0>>16)&0xff);
254 crc = update_crc16(crc, (shift0>>24)&0xff);
255 crc = update_crc16(crc, (shift1)&0xff);
256 crc = update_crc16(crc, (shift1>>8)&0xff);
257 crc = update_crc16(crc, (shift1>>16)&0xff);
258 crc = update_crc16(crc, (shift1>>24)&0xff);
259
260 Dbprintf("Info: Tag data: %x%08x, crc=%x",
261 (unsigned int)shift1, (unsigned int)shift0, (unsigned int)shift2 & 0xFFFF);
262 if (crc != (shift2&0xffff)) {
263 Dbprintf("Error: CRC mismatch, expected %x", (unsigned int)crc);
264 } else {
265 DbpString("Info: CRC is good");
266 }
267 }
e09f21fa 268}
269
270void WriteTIbyte(uint8_t b)
271{
e0165dcf 272 int i = 0;
273
274 // modulate 8 bits out to the antenna
275 for (i=0; i<8; i++)
276 {
277 if (b&(1<<i)) {
278 // stop modulating antenna
279 LOW(GPIO_SSC_DOUT);
280 SpinDelayUs(1000);
281 // modulate antenna
282 HIGH(GPIO_SSC_DOUT);
283 SpinDelayUs(1000);
284 } else {
285 // stop modulating antenna
286 LOW(GPIO_SSC_DOUT);
287 SpinDelayUs(300);
288 // modulate antenna
289 HIGH(GPIO_SSC_DOUT);
290 SpinDelayUs(1700);
291 }
292 }
e09f21fa 293}
294
295void AcquireTiType(void)
296{
e0165dcf 297 int i, j, n;
298 // tag transmission is <20ms, sampling at 2M gives us 40K samples max
299 // each sample is 1 bit stuffed into a uint32_t so we need 1250 uint32_t
e09f21fa 300 #define TIBUFLEN 1250
301
e0165dcf 302 // clear buffer
e09f21fa 303 uint32_t *BigBuf = (uint32_t *)BigBuf_get_addr();
709665b5 304 BigBuf_Clear_ext(false);
e0165dcf 305
306 // Set up the synchronous serial port
307 AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DIN;
308 AT91C_BASE_PIOA->PIO_ASR = GPIO_SSC_DIN;
309
310 // steal this pin from the SSP and use it to control the modulation
311 AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
312 AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
313
314 AT91C_BASE_SSC->SSC_CR = AT91C_SSC_SWRST;
315 AT91C_BASE_SSC->SSC_CR = AT91C_SSC_RXEN | AT91C_SSC_TXEN;
316
317 // Sample at 2 Mbit/s, so TI tags are 16.2 vs. 14.9 clocks long
318 // 48/2 = 24 MHz clock must be divided by 12
319 AT91C_BASE_SSC->SSC_CMR = 12;
320
321 AT91C_BASE_SSC->SSC_RCMR = SSC_CLOCK_MODE_SELECT(0);
322 AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(32) | AT91C_SSC_MSBF;
323 AT91C_BASE_SSC->SSC_TCMR = 0;
324 AT91C_BASE_SSC->SSC_TFMR = 0;
325
326 LED_D_ON();
327
328 // modulate antenna
329 HIGH(GPIO_SSC_DOUT);
330
331 // Charge TI tag for 50ms.
332 SpinDelay(50);
333
334 // stop modulating antenna and listen
335 LOW(GPIO_SSC_DOUT);
336
337 LED_D_OFF();
338
339 i = 0;
340 for(;;) {
341 if(AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
342 BigBuf[i] = AT91C_BASE_SSC->SSC_RHR; // store 32 bit values in buffer
343 i++; if(i >= TIBUFLEN) break;
344 }
345 WDT_HIT();
346 }
347
348 // return stolen pin to SSP
349 AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DOUT;
350 AT91C_BASE_PIOA->PIO_ASR = GPIO_SSC_DIN | GPIO_SSC_DOUT;
351
352 char *dest = (char *)BigBuf_get_addr();
353 n = TIBUFLEN*32;
354 // unpack buffer
355 for (i=TIBUFLEN-1; i>=0; i--) {
356 for (j=0; j<32; j++) {
357 if(BigBuf[i] & (1 << j)) {
358 dest[--n] = 1;
359 } else {
360 dest[--n] = -1;
361 }
362 }
363 }
e09f21fa 364}
365
366// arguments: 64bit data split into 32bit idhi:idlo and optional 16bit crc
367// if crc provided, it will be written with the data verbatim (even if bogus)
368// if not provided a valid crc will be computed from the data and written.
369void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc)
370{
fff58476 371 FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
e0165dcf 372 if(crc == 0) {
373 crc = update_crc16(crc, (idlo)&0xff);
374 crc = update_crc16(crc, (idlo>>8)&0xff);
375 crc = update_crc16(crc, (idlo>>16)&0xff);
376 crc = update_crc16(crc, (idlo>>24)&0xff);
377 crc = update_crc16(crc, (idhi)&0xff);
378 crc = update_crc16(crc, (idhi>>8)&0xff);
379 crc = update_crc16(crc, (idhi>>16)&0xff);
380 crc = update_crc16(crc, (idhi>>24)&0xff);
381 }
382 Dbprintf("Writing to tag: %x%08x, crc=%x",
383 (unsigned int) idhi, (unsigned int) idlo, crc);
384
385 // TI tags charge at 134.2Khz
386 FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
387 // Place FPGA in passthrough mode, in this mode the CROSS_LO line
388 // connects to SSP_DIN and the SSP_DOUT logic level controls
389 // whether we're modulating the antenna (high)
390 // or listening to the antenna (low)
391 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_PASSTHRU);
392 LED_A_ON();
393
394 // steal this pin from the SSP and use it to control the modulation
395 AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
396 AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
397
398 // writing algorithm:
399 // a high bit consists of a field off for 1ms and field on for 1ms
400 // a low bit consists of a field off for 0.3ms and field on for 1.7ms
401 // initiate a charge time of 50ms (field on) then immediately start writing bits
402 // start by writing 0xBB (keyword) and 0xEB (password)
403 // then write 80 bits of data (or 64 bit data + 16 bit crc if you prefer)
404 // finally end with 0x0300 (write frame)
405 // all data is sent lsb firts
406 // finish with 15ms programming time
407
408 // modulate antenna
409 HIGH(GPIO_SSC_DOUT);
410 SpinDelay(50); // charge time
411
412 WriteTIbyte(0xbb); // keyword
413 WriteTIbyte(0xeb); // password
414 WriteTIbyte( (idlo )&0xff );
415 WriteTIbyte( (idlo>>8 )&0xff );
416 WriteTIbyte( (idlo>>16)&0xff );
417 WriteTIbyte( (idlo>>24)&0xff );
418 WriteTIbyte( (idhi )&0xff );
419 WriteTIbyte( (idhi>>8 )&0xff );
420 WriteTIbyte( (idhi>>16)&0xff );
421 WriteTIbyte( (idhi>>24)&0xff ); // data hi to lo
422 WriteTIbyte( (crc )&0xff ); // crc lo
423 WriteTIbyte( (crc>>8 )&0xff ); // crc hi
424 WriteTIbyte(0x00); // write frame lo
425 WriteTIbyte(0x03); // write frame hi
426 HIGH(GPIO_SSC_DOUT);
427 SpinDelay(50); // programming time
428
429 LED_A_OFF();
430
431 // get TI tag data into the buffer
432 AcquireTiType();
433
434 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
72c5877a 435 DbpString("Now use `lf ti read` to check");
e09f21fa 436}
437
438void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
439{
e0165dcf 440 int i;
441 uint8_t *tab = BigBuf_get_addr();
e09f21fa 442
8c8317a5 443 //note FpgaDownloadAndGo destroys the bigbuf so be sure this is called before now...
444 //FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
e0165dcf 445 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT);
e09f21fa 446
e0165dcf 447 AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT | GPIO_SSC_CLK;
e09f21fa 448
e0165dcf 449 AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
450 AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_CLK;
e09f21fa 451
709665b5 452 #define SHORT_COIL() LOW(GPIO_SSC_DOUT)
453 #define OPEN_COIL() HIGH(GPIO_SSC_DOUT)
e09f21fa 454
e0165dcf 455 i = 0;
456 for(;;) {
457 //wait until SSC_CLK goes HIGH
f2081c43 458 int ii = 0;
e0165dcf 459 while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) {
f2081c43 460 //only check every 1000th time (usb_poll_validate_length on some systems was too slow)
461 if ( ii == 1000 ) {
462 if (BUTTON_PRESS() || usb_poll_validate_length() ) {
463 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
464 DbpString("Stopped");
465 return;
466 }
467 ii=0;
e0165dcf 468 }
469 WDT_HIT();
f2081c43 470 ii++;
e0165dcf 471 }
472 if (ledcontrol)
473 LED_D_ON();
474
475 if(tab[i])
476 OPEN_COIL();
477 else
478 SHORT_COIL();
479
480 if (ledcontrol)
481 LED_D_OFF();
f2081c43 482 ii=0;
e0165dcf 483 //wait until SSC_CLK goes LOW
484 while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK) {
f2081c43 485 //only check every 1000th time (usb_poll_validate_length on some systems was too slow)
486 if ( ii == 1000 ) {
487 if (BUTTON_PRESS() || usb_poll_validate_length() ) {
488 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
489 DbpString("Stopped");
490 return;
491 }
492 ii=0;
e0165dcf 493 }
494 WDT_HIT();
f2081c43 495 ii++;
e0165dcf 496 }
497
498 i++;
499 if(i == period) {
500
501 i = 0;
502 if (gap) {
503 SHORT_COIL();
504 SpinDelayUs(gap);
505 }
506 }
89696b8b 507
e0165dcf 508 }
e09f21fa 509}
510
e09f21fa 511#define DEBUG_FRAME_CONTENTS 1
512void SimulateTagLowFrequencyBidir(int divisor, int t0)
513{
514}
515
516// compose fc/8 fc/10 waveform (FSK2)
517static void fc(int c, int *n)
518{
e0165dcf 519 uint8_t *dest = BigBuf_get_addr();
520 int idx;
521
522 // for when we want an fc8 pattern every 4 logical bits
523 if(c==0) {
524 dest[((*n)++)]=1;
525 dest[((*n)++)]=1;
526 dest[((*n)++)]=1;
527 dest[((*n)++)]=1;
528 dest[((*n)++)]=0;
529 dest[((*n)++)]=0;
530 dest[((*n)++)]=0;
531 dest[((*n)++)]=0;
532 }
533
534 // an fc/8 encoded bit is a bit pattern of 11110000 x6 = 48 samples
535 if(c==8) {
536 for (idx=0; idx<6; idx++) {
537 dest[((*n)++)]=1;
538 dest[((*n)++)]=1;
539 dest[((*n)++)]=1;
540 dest[((*n)++)]=1;
541 dest[((*n)++)]=0;
542 dest[((*n)++)]=0;
543 dest[((*n)++)]=0;
544 dest[((*n)++)]=0;
545 }
546 }
547
548 // an fc/10 encoded bit is a bit pattern of 1111100000 x5 = 50 samples
549 if(c==10) {
550 for (idx=0; idx<5; idx++) {
551 dest[((*n)++)]=1;
552 dest[((*n)++)]=1;
553 dest[((*n)++)]=1;
554 dest[((*n)++)]=1;
555 dest[((*n)++)]=1;
556 dest[((*n)++)]=0;
557 dest[((*n)++)]=0;
558 dest[((*n)++)]=0;
559 dest[((*n)++)]=0;
560 dest[((*n)++)]=0;
561 }
562 }
e09f21fa 563}
564// compose fc/X fc/Y waveform (FSKx)
712ebfa6 565static void fcAll(uint8_t fc, int *n, uint8_t clock, uint16_t *modCnt)
e09f21fa 566{
e0165dcf 567 uint8_t *dest = BigBuf_get_addr();
568 uint8_t halfFC = fc/2;
569 uint8_t wavesPerClock = clock/fc;
570 uint8_t mod = clock % fc; //modifier
571 uint8_t modAdj = fc/mod; //how often to apply modifier
44964fd1 572 bool modAdjOk = !(fc % mod); //if (fc % mod==0) modAdjOk=true;
e0165dcf 573 // loop through clock - step field clock
574 for (uint8_t idx=0; idx < wavesPerClock; idx++){
575 // put 1/2 FC length 1's and 1/2 0's per field clock wave (to create the wave)
576 memset(dest+(*n), 0, fc-halfFC); //in case of odd number use extra here
577 memset(dest+(*n)+(fc-halfFC), 1, halfFC);
578 *n += fc;
579 }
580 if (mod>0) (*modCnt)++;
581 if ((mod>0) && modAdjOk){ //fsk2
582 if ((*modCnt % modAdj) == 0){ //if 4th 8 length wave in a rf/50 add extra 8 length wave
583 memset(dest+(*n), 0, fc-halfFC);
584 memset(dest+(*n)+(fc-halfFC), 1, halfFC);
585 *n += fc;
586 }
587 }
588 if (mod>0 && !modAdjOk){ //fsk1
589 memset(dest+(*n), 0, mod-(mod/2));
590 memset(dest+(*n)+(mod-(mod/2)), 1, mod/2);
591 *n += mod;
592 }
e09f21fa 593}
594
595// prepare a waveform pattern in the buffer based on the ID given then
596// simulate a HID tag until the button is pressed
be59094d 597void CmdHIDsimTAG(int hi2, int hi, int lo, int ledcontrol)
e09f21fa 598{
e0165dcf 599 int n=0, i=0;
600 /*
601 HID tag bitstream format
602 The tag contains a 44bit unique code. This is sent out MSB first in sets of 4 bits
603 A 1 bit is represented as 6 fc8 and 5 fc10 patterns
604 A 0 bit is represented as 5 fc10 and 6 fc8 patterns
605 A fc8 is inserted before every 4 bits
606 A special start of frame pattern is used consisting a0b0 where a and b are neither 0
607 nor 1 bits, they are special patterns (a = set of 12 fc8 and b = set of 10 fc10)
608 */
609
be59094d 610 if (hi2>0x0FFFFFFF) {
611 DbpString("Tags can only have 44 or 84 bits. - USE lf simfsk for larger tags");
e0165dcf 612 return;
613 }
f2081c43 614 // set LF so we don't kill the bigbuf we are setting with simulation data.
615 FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
616
e0165dcf 617 fc(0,&n);
618 // special start of frame marker containing invalid bit sequences
619 fc(8, &n); fc(8, &n); // invalid
620 fc(8, &n); fc(10, &n); // logical 0
621 fc(10, &n); fc(10, &n); // invalid
622 fc(8, &n); fc(10, &n); // logical 0
623
624 WDT_HIT();
be59094d 625 if (hi2 > 0 || hi > 0xFFF){
626 // manchester encode bits 91 to 64 (91-84 are part of the header)
627 for (i=27; i>=0; i--) {
628 if ((i%4)==3) fc(0,&n);
629 if ((hi2>>i)&1) {
630 fc(10, &n); fc(8, &n); // low-high transition
631 } else {
632 fc(8, &n); fc(10, &n); // high-low transition
633 }
634 }
635 WDT_HIT();
636 // manchester encode bits 63 to 32
637 for (i=31; i>=0; i--) {
638 if ((i%4)==3) fc(0,&n);
639 if ((hi>>i)&1) {
640 fc(10, &n); fc(8, &n); // low-high transition
641 } else {
642 fc(8, &n); fc(10, &n); // high-low transition
643 }
644 }
645 } else {
646 // manchester encode bits 43 to 32
647 for (i=11; i>=0; i--) {
648 if ((i%4)==3) fc(0,&n);
649 if ((hi>>i)&1) {
650 fc(10, &n); fc(8, &n); // low-high transition
651 } else {
652 fc(8, &n); fc(10, &n); // high-low transition
653 }
e0165dcf 654 }
655 }
656
657 WDT_HIT();
658 // manchester encode bits 31 to 0
659 for (i=31; i>=0; i--) {
660 if ((i%4)==3) fc(0,&n);
661 if ((lo>>i)&1) {
662 fc(10, &n); fc(8, &n); // low-high transition
663 } else {
664 fc(8, &n); fc(10, &n); // high-low transition
665 }
666 }
667
668 if (ledcontrol)
669 LED_A_ON();
670 SimulateTagLowFrequency(n, 0, ledcontrol);
671
672 if (ledcontrol)
673 LED_A_OFF();
e09f21fa 674}
675
676// prepare a waveform pattern in the buffer based on the ID given then
677// simulate a FSK tag until the button is pressed
678// arg1 contains fcHigh and fcLow, arg2 contains invert and clock
679void CmdFSKsimTAG(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream)
680{
e0165dcf 681 int ledcontrol=1;
682 int n=0, i=0;
683 uint8_t fcHigh = arg1 >> 8;
684 uint8_t fcLow = arg1 & 0xFF;
685 uint16_t modCnt = 0;
686 uint8_t clk = arg2 & 0xFF;
687 uint8_t invert = (arg2 >> 8) & 1;
688
f2081c43 689 // set LF so we don't kill the bigbuf we are setting with simulation data.
690 FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
691
e0165dcf 692 for (i=0; i<size; i++){
693 if (BitStream[i] == invert){
694 fcAll(fcLow, &n, clk, &modCnt);
695 } else {
696 fcAll(fcHigh, &n, clk, &modCnt);
697 }
698 }
699 Dbprintf("Simulating with fcHigh: %d, fcLow: %d, clk: %d, invert: %d, n: %d",fcHigh, fcLow, clk, invert, n);
700 /*Dbprintf("DEBUG: First 32:");
701 uint8_t *dest = BigBuf_get_addr();
702 i=0;
703 Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
704 i+=16;
705 Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
706 */
707 if (ledcontrol)
708 LED_A_ON();
709
710 SimulateTagLowFrequency(n, 0, ledcontrol);
711
712 if (ledcontrol)
713 LED_A_OFF();
e09f21fa 714}
715
716// compose ask waveform for one bit(ASK)
e0165dcf 717static void askSimBit(uint8_t c, int *n, uint8_t clock, uint8_t manchester)
e09f21fa 718{
e0165dcf 719 uint8_t *dest = BigBuf_get_addr();
720 uint8_t halfClk = clock/2;
721 // c = current bit 1 or 0
722 if (manchester==1){
723 memset(dest+(*n), c, halfClk);
724 memset(dest+(*n) + halfClk, c^1, halfClk);
725 } else {
726 memset(dest+(*n), c, clock);
727 }
728 *n += clock;
e09f21fa 729}
730
b41534d1 731static void biphaseSimBit(uint8_t c, int *n, uint8_t clock, uint8_t *phase)
732{
e0165dcf 733 uint8_t *dest = BigBuf_get_addr();
734 uint8_t halfClk = clock/2;
735 if (c){
736 memset(dest+(*n), c ^ 1 ^ *phase, halfClk);
737 memset(dest+(*n) + halfClk, c ^ *phase, halfClk);
738 } else {
739 memset(dest+(*n), c ^ *phase, clock);
740 *phase ^= 1;
741 }
39611e3d 742 *n += clock;
b41534d1 743}
744
29ada8fc 745static void stAskSimBit(int *n, uint8_t clock) {
746 uint8_t *dest = BigBuf_get_addr();
747 uint8_t halfClk = clock/2;
748 //ST = .5 high .5 low 1.5 high .5 low 1 high
749 memset(dest+(*n), 1, halfClk);
750 memset(dest+(*n) + halfClk, 0, halfClk);
751 memset(dest+(*n) + clock, 1, clock + halfClk);
752 memset(dest+(*n) + clock*2 + halfClk, 0, halfClk);
753 memset(dest+(*n) + clock*3, 1, clock);
754 *n += clock*4;
755}
756
e09f21fa 757// args clock, ask/man or askraw, invert, transmission separator
758void CmdASKsimTag(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream)
759{
e0165dcf 760 int ledcontrol = 1;
761 int n=0, i=0;
762 uint8_t clk = (arg1 >> 8) & 0xFF;
2b3af97d 763 uint8_t encoding = arg1 & 0xFF;
e0165dcf 764 uint8_t separator = arg2 & 1;
765 uint8_t invert = (arg2 >> 8) & 1;
766
f2081c43 767 // set LF so we don't kill the bigbuf we are setting with simulation data.
768 FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
769
e0165dcf 770 if (encoding==2){ //biphase
771 uint8_t phase=0;
772 for (i=0; i<size; i++){
773 biphaseSimBit(BitStream[i]^invert, &n, clk, &phase);
774 }
39611e3d 775 if (phase==1) { //run a second set inverted to keep phase in check
e0165dcf 776 for (i=0; i<size; i++){
777 biphaseSimBit(BitStream[i]^invert, &n, clk, &phase);
778 }
779 }
780 } else { // ask/manchester || ask/raw
781 for (i=0; i<size; i++){
782 askSimBit(BitStream[i]^invert, &n, clk, encoding);
783 }
7666f460 784 if (encoding==0 && BitStream[0]==BitStream[size-1]){ //run a second set inverted (for ask/raw || biphase phase)
e0165dcf 785 for (i=0; i<size; i++){
786 askSimBit(BitStream[i]^invert^1, &n, clk, encoding);
787 }
788 }
789 }
29ada8fc 790 if (separator==1 && encoding == 1)
791 stAskSimBit(&n, clk);
792 else if (separator==1)
793 Dbprintf("sorry but separator option not yet available");
e0165dcf 794
795 Dbprintf("Simulating with clk: %d, invert: %d, encoding: %d, separator: %d, n: %d",clk, invert, encoding, separator, n);
796 //DEBUG
797 //Dbprintf("First 32:");
798 //uint8_t *dest = BigBuf_get_addr();
799 //i=0;
800 //Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
801 //i+=16;
802 //Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
39611e3d 803
709665b5 804 if (ledcontrol) LED_A_ON();
e0165dcf 805 SimulateTagLowFrequency(n, 0, ledcontrol);
709665b5 806 if (ledcontrol) LED_A_OFF();
e09f21fa 807}
808
809//carrier can be 2,4 or 8
810static void pskSimBit(uint8_t waveLen, int *n, uint8_t clk, uint8_t *curPhase, bool phaseChg)
811{
e0165dcf 812 uint8_t *dest = BigBuf_get_addr();
813 uint8_t halfWave = waveLen/2;
814 //uint8_t idx;
815 int i = 0;
816 if (phaseChg){
817 // write phase change
818 memset(dest+(*n), *curPhase^1, halfWave);
819 memset(dest+(*n) + halfWave, *curPhase, halfWave);
820 *n += waveLen;
821 *curPhase ^= 1;
822 i += waveLen;
823 }
824 //write each normal clock wave for the clock duration
825 for (; i < clk; i+=waveLen){
826 memset(dest+(*n), *curPhase, halfWave);
827 memset(dest+(*n) + halfWave, *curPhase^1, halfWave);
828 *n += waveLen;
829 }
e09f21fa 830}
831
832// args clock, carrier, invert,
833void CmdPSKsimTag(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream)
834{
e0165dcf 835 int ledcontrol=1;
836 int n=0, i=0;
837 uint8_t clk = arg1 >> 8;
838 uint8_t carrier = arg1 & 0xFF;
839 uint8_t invert = arg2 & 0xFF;
840 uint8_t curPhase = 0;
f2081c43 841 // set LF so we don't kill the bigbuf we are setting with simulation data.
842 FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
843
e0165dcf 844 for (i=0; i<size; i++){
845 if (BitStream[i] == curPhase){
44964fd1 846 pskSimBit(carrier, &n, clk, &curPhase, false);
e0165dcf 847 } else {
44964fd1 848 pskSimBit(carrier, &n, clk, &curPhase, true);
e0165dcf 849 }
850 }
851 Dbprintf("Simulating with Carrier: %d, clk: %d, invert: %d, n: %d",carrier, clk, invert, n);
852 //Dbprintf("DEBUG: First 32:");
853 //uint8_t *dest = BigBuf_get_addr();
854 //i=0;
855 //Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
856 //i+=16;
857 //Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
858
709665b5 859 if (ledcontrol) LED_A_ON();
e0165dcf 860 SimulateTagLowFrequency(n, 0, ledcontrol);
709665b5 861 if (ledcontrol) LED_A_OFF();
e09f21fa 862}
863
864// loop to get raw HID waveform then FSK demodulate the TAG ID from it
be59094d 865void CmdHIDdemodFSK(int findone, int *high2, int *high, int *low, int ledcontrol)
e09f21fa 866{
e0165dcf 867 uint8_t *dest = BigBuf_get_addr();
2eec55c8 868 //const size_t sizeOfBigBuff = BigBuf_max_traceLen();
869 size_t size;
e0165dcf 870 uint32_t hi2=0, hi=0, lo=0;
871 int idx=0;
1c70664a 872 int dummyIdx = 0;
e0165dcf 873 // Configure to go in 125Khz listen mode
874 LFSetupFPGAForADC(95, true);
e09f21fa 875
3cec7061 876 //clear read buffer
29b75739 877 BigBuf_Clear_keep_EM();
3cec7061 878
d10e08ae 879 while(!BUTTON_PRESS() && !usb_poll_validate_length()) {
e0165dcf 880 WDT_HIT();
881 if (ledcontrol) LED_A_ON();
e09f21fa 882
883 DoAcquisition_default(-1,true);
884 // FSK demodulator
2eec55c8 885 //size = sizeOfBigBuff; //variable size will change after demod so re initialize it before use
886 size = 50*128*2; //big enough to catch 2 sequences of largest format
1c70664a 887 idx = HIDdemodFSK(dest, &size, &hi2, &hi, &lo, &dummyIdx);
e0165dcf 888
2eec55c8 889 if (idx>0 && lo>0 && (size==96 || size==192)){
fc7a78f2 890 uint8_t bitlen = 0;
891 uint32_t fc = 0;
892 uint32_t cardnum = 0;
893 bool decoded = false;
894
2eec55c8 895 // go over previously decoded manchester data and decode into usable tag ID
fc7a78f2 896 if ((hi2 & 0x000FFFF) != 0){ //extra large HID tags 88/192 bits
897 uint32_t bp = hi2 & 0x000FFFFF;
898 bitlen = 63;
899 while (bp > 0) {
900 bp = bp >> 1;
901 bitlen++;
902 }
903 } else if ((hi >> 6) > 0) {
904 uint32_t bp = hi;
905 bitlen = 31;
906 while (bp > 0) {
907 bp = bp >> 1;
908 bitlen++;
909 }
910 } else if (((hi >> 5) & 1) == 0) {
911 bitlen = 37;
912 } else if ((hi & 0x0000001F) > 0 ) {
913 uint32_t bp = (hi & 0x0000001F);
914 bitlen = 31;
915 while (bp > 0) {
916 bp = bp >> 1;
917 bitlen++;
918 }
919 } else {
920 uint32_t bp = lo;
921 bitlen = 0;
922 while (bp > 0) {
923 bp = bp >> 1;
924 bitlen++;
925 }
926 }
927 switch (bitlen){
928 case 26:
929 cardnum = (lo>>1)&0xFFFF;
930 fc = (lo>>17)&0xFF;
931 decoded = true;
932 break;
933 case 35:
934 cardnum = (lo>>1)&0xFFFFF;
935 fc = ((hi&1)<<11)|(lo>>21);
936 decoded = true;
937 break;
e0165dcf 938 }
fc7a78f2 939
940 if (hi2 != 0) //extra large HID tags 88/192 bits
941 Dbprintf("TAG ID: %x%08x%08x (%d)",
942 (unsigned int) hi2, (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
943 else
944 Dbprintf("TAG ID: %x%08x (%d)",
945 (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
946
947 if (decoded)
948 Dbprintf("Format Len: %dbits - FC: %d - Card: %d",
949 (unsigned int) bitlen, (unsigned int) fc, (unsigned int) cardnum);
950
e0165dcf 951 if (findone){
952 if (ledcontrol) LED_A_OFF();
be59094d 953 *high2 = hi2;
e0165dcf 954 *high = hi;
955 *low = lo;
89696b8b 956 break;
e0165dcf 957 }
958 // reset
e0165dcf 959 }
2eec55c8 960 hi2 = hi = lo = idx = 0;
e0165dcf 961 WDT_HIT();
962 }
89696b8b 963
964 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
e0165dcf 965 DbpString("Stopped");
966 if (ledcontrol) LED_A_OFF();
e09f21fa 967}
968
dbf6e824
CY
969// loop to get raw HID waveform then FSK demodulate the TAG ID from it
970void CmdAWIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
971{
972 uint8_t *dest = BigBuf_get_addr();
dbf6e824 973 size_t size;
1c70664a 974 int idx=0, dummyIdx=0;
3cec7061 975 //clear read buffer
29b75739 976 BigBuf_Clear_keep_EM();
dbf6e824
CY
977 // Configure to go in 125Khz listen mode
978 LFSetupFPGAForADC(95, true);
979
d10e08ae 980 while(!BUTTON_PRESS() && !usb_poll_validate_length()) {
dbf6e824
CY
981
982 WDT_HIT();
983 if (ledcontrol) LED_A_ON();
984
985 DoAcquisition_default(-1,true);
986 // FSK demodulator
dbf6e824 987 size = 50*128*2; //big enough to catch 2 sequences of largest format
1c70664a 988 idx = AWIDdemodFSK(dest, &size, &dummyIdx);
dbf6e824 989
709665b5 990 if (idx<=0 || size!=96) continue;
991 // Index map
992 // 0 10 20 30 40 50 60
993 // | | | | | | |
994 // 01234567 890 1 234 5 678 9 012 3 456 7 890 1 234 5 678 9 012 3 456 7 890 1 234 5 678 9 012 3 - to 96
995 // -----------------------------------------------------------------------------
996 // 00000001 000 1 110 1 101 1 011 1 101 1 010 0 000 1 000 1 010 0 001 0 110 1 100 0 000 1 000 1
997 // premable bbb o bbb o bbw o fff o fff o ffc o ccc o ccc o ccc o ccc o ccc o wxx o xxx o xxx o - to 96
998 // |---26 bit---| |-----117----||-------------142-------------|
999 // b = format bit len, o = odd parity of last 3 bits
1000 // f = facility code, c = card number
1001 // w = wiegand parity
1002 // (26 bit format shown)
1003
1004 //get raw ID before removing parities
1005 uint32_t rawLo = bytebits_to_byte(dest+idx+64,32);
1006 uint32_t rawHi = bytebits_to_byte(dest+idx+32,32);
1007 uint32_t rawHi2 = bytebits_to_byte(dest+idx,32);
1008
1009 size = removeParity(dest, idx+8, 4, 1, 88);
1010 if (size != 66) continue;
1011 // ok valid card found!
1012
1013 // Index map
1014 // 0 10 20 30 40 50 60
1015 // | | | | | | |
1016 // 01234567 8 90123456 7890123456789012 3 456789012345678901234567890123456
1017 // -----------------------------------------------------------------------------
1018 // 00011010 1 01110101 0000000010001110 1 000000000000000000000000000000000
1019 // bbbbbbbb w ffffffff cccccccccccccccc w xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
1020 // |26 bit| |-117--| |-----142------|
1021 // b = format bit len, o = odd parity of last 3 bits
1022 // f = facility code, c = card number
1023 // w = wiegand parity
1024 // (26 bit format shown)
1025
1026 uint32_t fc = 0;
1027 uint32_t cardnum = 0;
1028 uint32_t code1 = 0;
1029 uint32_t code2 = 0;
1030 uint8_t fmtLen = bytebits_to_byte(dest,8);
1031 if (fmtLen==26){
1032 fc = bytebits_to_byte(dest+9, 8);
1033 cardnum = bytebits_to_byte(dest+17, 16);
1034 code1 = bytebits_to_byte(dest+8,fmtLen);
1035 Dbprintf("AWID Found - BitLength: %d, FC: %d, Card: %d - Wiegand: %x, Raw: %08x%08x%08x", fmtLen, fc, cardnum, code1, rawHi2, rawHi, rawLo);
1036 } else {
1037 cardnum = bytebits_to_byte(dest+8+(fmtLen-17), 16);
1038 if (fmtLen>32){
1039 code1 = bytebits_to_byte(dest+8,fmtLen-32);
1040 code2 = bytebits_to_byte(dest+8+(fmtLen-32),32);
1041 Dbprintf("AWID Found - BitLength: %d -unknown BitLength- (%d) - Wiegand: %x%08x, Raw: %08x%08x%08x", fmtLen, cardnum, code1, code2, rawHi2, rawHi, rawLo);
1042 } else{
1043 code1 = bytebits_to_byte(dest+8,fmtLen);
1044 Dbprintf("AWID Found - BitLength: %d -unknown BitLength- (%d) - Wiegand: %x, Raw: %08x%08x%08x", fmtLen, cardnum, code1, rawHi2, rawHi, rawLo);
dbf6e824 1045 }
dbf6e824 1046 }
709665b5 1047 if (findone){
1048 if (ledcontrol) LED_A_OFF();
89696b8b 1049 break;
709665b5 1050 }
1051 // reset
dbf6e824
CY
1052 idx = 0;
1053 WDT_HIT();
1054 }
89696b8b 1055 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
dbf6e824
CY
1056 DbpString("Stopped");
1057 if (ledcontrol) LED_A_OFF();
1058}
1059
e09f21fa 1060void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol)
1061{
e0165dcf 1062 uint8_t *dest = BigBuf_get_addr();
1063
1064 size_t size=0, idx=0;
1065 int clk=0, invert=0, errCnt=0, maxErr=20;
1066 uint32_t hi=0;
1067 uint64_t lo=0;
3cec7061 1068 //clear read buffer
29b75739 1069 BigBuf_Clear_keep_EM();
e0165dcf 1070 // Configure to go in 125Khz listen mode
1071 LFSetupFPGAForADC(95, true);
1072
d10e08ae 1073 while(!BUTTON_PRESS() && !usb_poll_validate_length()) {
e0165dcf 1074
1075 WDT_HIT();
1076 if (ledcontrol) LED_A_ON();
1077
1078 DoAcquisition_default(-1,true);
1079 size = BigBuf_max_traceLen();
e0165dcf 1080 //askdemod and manchester decode
2eec55c8 1081 if (size > 16385) size = 16385; //big enough to catch 2 sequences of largest format
fef74fdc 1082 errCnt = askdemod(dest, &size, &clk, &invert, maxErr, 0, 1);
e0165dcf 1083 WDT_HIT();
1084
2eec55c8 1085 if (errCnt<0) continue;
1086
1087 errCnt = Em410xDecode(dest, &size, &idx, &hi, &lo);
1088 if (errCnt){
1089 if (size>64){
1090 Dbprintf("EM XL TAG ID: %06x%08x%08x - (%05d_%03d_%08d)",
1091 hi,
1092 (uint32_t)(lo>>32),
1093 (uint32_t)lo,
1094 (uint32_t)(lo&0xFFFF),
1095 (uint32_t)((lo>>16LL) & 0xFF),
1096 (uint32_t)(lo & 0xFFFFFF));
1097 } else {
1098 Dbprintf("EM TAG ID: %02x%08x - (%05d_%03d_%08d)",
1099 (uint32_t)(lo>>32),
1100 (uint32_t)lo,
1101 (uint32_t)(lo&0xFFFF),
1102 (uint32_t)((lo>>16LL) & 0xFF),
1103 (uint32_t)(lo & 0xFFFFFF));
e0165dcf 1104 }
2eec55c8 1105
e0165dcf 1106 if (findone){
1107 if (ledcontrol) LED_A_OFF();
1108 *high=lo>>32;
1109 *low=lo & 0xFFFFFFFF;
89696b8b 1110 break;
e0165dcf 1111 }
e0165dcf 1112 }
1113 WDT_HIT();
2eec55c8 1114 hi = lo = size = idx = 0;
1115 clk = invert = errCnt = 0;
e0165dcf 1116 }
89696b8b 1117 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
e0165dcf 1118 DbpString("Stopped");
1119 if (ledcontrol) LED_A_OFF();
e09f21fa 1120}
1121
1122void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
1123{
e0165dcf 1124 uint8_t *dest = BigBuf_get_addr();
1125 int idx=0;
1126 uint32_t code=0, code2=0;
1127 uint8_t version=0;
1128 uint8_t facilitycode=0;
1129 uint16_t number=0;
1c70664a 1130 int dummyIdx=0;
3cec7061 1131 //clear read buffer
29b75739 1132 BigBuf_Clear_keep_EM();
e0165dcf 1133 // Configure to go in 125Khz listen mode
1134 LFSetupFPGAForADC(95, true);
1135
d10e08ae 1136 while(!BUTTON_PRESS() && !usb_poll_validate_length()) {
e0165dcf 1137 WDT_HIT();
1138 if (ledcontrol) LED_A_ON();
e09f21fa 1139 DoAcquisition_default(-1,true);
1140 //fskdemod and get start index
e0165dcf 1141 WDT_HIT();
1c70664a 1142 idx = IOdemodFSK(dest, BigBuf_max_traceLen(), &dummyIdx);
2eec55c8 1143 if (idx<0) continue;
1144 //valid tag found
1145
1146 //Index map
1147 //0 10 20 30 40 50 60
1148 //| | | | | | |
1149 //01234567 8 90123456 7 89012345 6 78901234 5 67890123 4 56789012 3 45678901 23
1150 //-----------------------------------------------------------------------------
1151 //00000000 0 11110000 1 facility 1 version* 1 code*one 1 code*two 1 ???????? 11
1152 //
1153 //XSF(version)facility:codeone+codetwo
1154 //Handle the data
1155 if(findone){ //only print binary if we are doing one
1156 Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx], dest[idx+1], dest[idx+2],dest[idx+3],dest[idx+4],dest[idx+5],dest[idx+6],dest[idx+7],dest[idx+8]);
1157 Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+9], dest[idx+10],dest[idx+11],dest[idx+12],dest[idx+13],dest[idx+14],dest[idx+15],dest[idx+16],dest[idx+17]);
1158 Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+18],dest[idx+19],dest[idx+20],dest[idx+21],dest[idx+22],dest[idx+23],dest[idx+24],dest[idx+25],dest[idx+26]);
1159 Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+27],dest[idx+28],dest[idx+29],dest[idx+30],dest[idx+31],dest[idx+32],dest[idx+33],dest[idx+34],dest[idx+35]);
1160 Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+36],dest[idx+37],dest[idx+38],dest[idx+39],dest[idx+40],dest[idx+41],dest[idx+42],dest[idx+43],dest[idx+44]);
1161 Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+45],dest[idx+46],dest[idx+47],dest[idx+48],dest[idx+49],dest[idx+50],dest[idx+51],dest[idx+52],dest[idx+53]);
1162 Dbprintf("%d%d%d%d%d%d%d%d %d%d",dest[idx+54],dest[idx+55],dest[idx+56],dest[idx+57],dest[idx+58],dest[idx+59],dest[idx+60],dest[idx+61],dest[idx+62],dest[idx+63]);
1163 }
1164 code = bytebits_to_byte(dest+idx,32);
1165 code2 = bytebits_to_byte(dest+idx+32,32);
1166 version = bytebits_to_byte(dest+idx+27,8); //14,4
1167 facilitycode = bytebits_to_byte(dest+idx+18,8);
1168 number = (bytebits_to_byte(dest+idx+36,8)<<8)|(bytebits_to_byte(dest+idx+45,8)); //36,9
1169
1170 Dbprintf("XSF(%02d)%02x:%05d (%08x%08x)",version,facilitycode,number,code,code2);
1171 // if we're only looking for one tag
1172 if (findone){
1173 if (ledcontrol) LED_A_OFF();
1174 //LED_A_OFF();
1175 *high=code;
1176 *low=code2;
89696b8b 1177 break;
e0165dcf 1178 }
2eec55c8 1179 code=code2=0;
1180 version=facilitycode=0;
1181 number=0;
1182 idx=0;
1183
e0165dcf 1184 WDT_HIT();
1185 }
89696b8b 1186 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
e0165dcf 1187 DbpString("Stopped");
1188 if (ledcontrol) LED_A_OFF();
e09f21fa 1189}
1190
1191/*------------------------------
3606ac0a 1192 * T5555/T5557/T5567/T5577 routines
e09f21fa 1193 *------------------------------
709665b5 1194 * NOTE: T55x7/T5555 configuration register definitions moved to protocols.h
1195 *
3606ac0a 1196 * Relevant communication times in microsecond
e09f21fa 1197 * To compensate antenna falling times shorten the write times
1198 * and enlarge the gap ones.
7cfc777b 1199 * Q5 tags seems to have issues when these values changes.
e09f21fa 1200 */
2de26056 1201
4be71814 1202 /*
1203 // Original Timings for reference
dcd936a1 1204//note startgap must be sent after tag has been powered up for more than 3ms (per T5557 ds)
4be71814 1205
4a3f1a37 1206#define START_GAP 31*8 // was 250 // SPEC: 1*8 to 50*8 - typ 15*8 (or 15fc)
1207#define WRITE_GAP 20*8 // was 160 // SPEC: 1*8 to 20*8 - typ 10*8 (or 10fc)
1208#define WRITE_0 18*8 // was 144 // SPEC: 16*8 to 32*8 - typ 24*8 (or 24fc)
1209#define WRITE_1 50*8 // was 400 // SPEC: 48*8 to 64*8 - typ 56*8 (or 56fc) 432 for T55x7; 448 for E5550
dcd936a1 1210#define READ_GAP 15*8
64449382 1211
50764caa 1212*/
2de26056 1213/* Q5 timing datasheet:
1214 * Type | MIN | Typical | Max |
1215 * Start_Gap | 10*8 | ? | 50*8 |
1216 * Write_Gap Normal mode | 8*8 | 14*8 | 20*8 |
1217 * Write_Gap Fast Mode | 8*8 | ? | 20*8 |
1218 * Write_0 Normal mode | 16*8 | 24*8 | 32*8 |
1219 * Write_1 Normal mode | 48*8 | 56*8 | 64*8 |
1220 * Write_0 Fast Mode | 8*8 | 12*8 | 16*8 |
1221 * Write_1 Fast Mode | 24*8 | 28*8 | 32*8 |
1222*/
1223
1224/* T5557 timing datasheet:
1225 * Type | MIN | Typical | Max |
1226 * Start_Gap | 10*8 | ? | 50*8 |
1227 * Write_Gap Normal mode | 8*8 |50-150us | 30*8 |
1228 * Write_Gap Fast Mode | 8*8 | ? | 20*8 |
1229 * Write_0 Normal mode | 16*8 | 24*8 | 31*8 |
1230 * Write_1 Normal mode | 48*8 | 54*8 | 63*8 |
1231 * Write_0 Fast Mode | 8*8 | 12*8 | 15*8 |
1232 * Write_1 Fast Mode | 24*8 | 28*8 | 31*8 |
1233*/
1234
1235/* T5577C timing datasheet for Fixed-Bit-Length protocol (defualt):
1236 * Type | MIN | Typical | Max |
1237 * Start_Gap | 8*8 | 15*8 | 50*8 |
1238 * Write_Gap Normal mode | 8*8 | 10*8 | 20*8 |
1239 * Write_Gap Fast Mode | 8*8 | 10*8 | 20*8 |
1240 * Write_0 Normal mode | 16*8 | 24*8 | 32*8 |
1241 * Write_1 Normal mode | 48*8 | 56*8 | 64*8 |
1242 * Write_0 Fast Mode | 8*8 | 12*8 | 16*8 |
1243 * Write_1 Fast Mode | 24*8 | 28*8 | 32*8 |
1244*/
dd8e4513 1245
4be71814 1246// Structure to hold Timing values. In future will be simplier to add user changable timings.
1247typedef struct {
1248 uint16_t START_GAP;
1249 uint16_t WRITE_GAP;
1250 uint16_t WRITE_0;
1251 uint16_t WRITE_1;
1252 uint16_t WRITE_2;
1253 uint16_t WRITE_3;
1254 uint16_t READ_GAP;
1255} T55xx_Timing;
1256
4be71814 1257// Set Initial/Default Values. Note: *8 can occure when used. This should keep things simplier here.
1258T55xx_Timing T55xx_Timing_FixedBit = { 31 * 8 , 20 * 8 , 18 * 8 , 50 * 8 , 0 , 0 , 15 * 8 };
1259T55xx_Timing T55xx_Timing_LLR = { 31 * 8 , 20 * 8 , 18 * 8 , 50 * 8 , 0 , 0 , 15 * 8 };
1260T55xx_Timing T55xx_Timing_Leading0 = { 31 * 8 , 20 * 8 , 18 * 8 , 40 * 8 , 0 , 0 , 15 * 8 };
1261T55xx_Timing T55xx_Timing_1of4 = { 31 * 8 , 20 * 8 , 18 * 8 , 34 * 8 , 50 * 8 , 66 * 8 , 15 * 8 };
dd8e4513 1262
4be71814 1263// Some defines for readability
4be71814 1264#define T55xx_DLMode_Fixed 0 // Default Mode
1265#define T55xx_DLMode_LLR 1 // Long Leading Reference
1266#define T55xx_DLMode_Leading0 2 // Leading Zero
347efc12 1267#define T55xx_DLMode_1of4 3 // 1 of 4
50764caa 1268#define T55xx_LongLeadingReference 4 // Value to tell Write Bit to send long reference
7db36608 1269// Macro for code readability
28597bb6 1270#define BitStream_Byte(X) ((X) >> 3)
1271#define BitStream_Bit(X) ((X) & 7)
7db36608 1272
dd8e4513 1273
4be71814 1274void TurnReadLFOn(int delay) {
1275 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
1276 // Give it a bit of time for the resonant antenna to settle.
1277 WaitUS(delay); //155*8 //50*8
dd8e4513 1278}
dd8e4513 1279
4be71814 1280// Write one bit to card
1281void T55xxWriteBit(int bit, T55xx_Timing *Timings) {
dd8e4513 1282
4be71814 1283 // If bit = 4 Send Long Leading Reference which is 138 + WRITE_0
347efc12 1284 // Dbprintf ("Bits : %d",bit);
4be71814 1285 switch (bit){
1286 case 0 : TurnReadLFOn(Timings->WRITE_0); break; // Send bit 0/00
1287 case 1 : TurnReadLFOn(Timings->WRITE_1); break; // Send bit 1/01
1288 case 2 : TurnReadLFOn(Timings->WRITE_2); break; // Send bits 10
347efc12 1289 case 3 : TurnReadLFOn(Timings->WRITE_3); break; // Send bits 11
1290 case 4 : TurnReadLFOn(Timings->WRITE_0 + (136 * 8)); break; // Send Long Leading Reference
1291 }
4be71814 1292 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
1293 WaitUS(Timings->WRITE_GAP);
1294}
dd8e4513 1295
4be71814 1296// Function to abstract an Arbitrary length byte array to store bit pattern.
1297// bit_array - Array to hold data/bit pattern
1298// start_offset - bit location to start storing new bits.
1299// data - upto 32 bits of data to store
1300// num_bits - how many bits (low x bits of data) Max 32 bits at a time
1301// max_len - how many bytes can the bit_array hold (ensure no buffer overflow)
1302// returns "Next" bit offset / bits stored (for next store)
5a996482 1303//int T55xx_SetBits (uint8_t *bit_array, int start_offset, uint32_t data , int num_bits, int max_len)
7db36608 1304int T55xx_SetBits (uint8_t *BitStream, uint8_t start_offset, uint32_t data , uint8_t num_bits, uint8_t max_len)
4be71814 1305{
347efc12 1306 int8_t offset;
1307 int8_t NextOffset = start_offset;
1308
1309 // Check if data will fit.
1310 if ((start_offset + num_bits) <= (max_len*8)) {
1311 // Loop through the data and store
1312 for (offset = (num_bits-1); offset >= 0; offset--) {
1313
1314 if ((data >> offset) & 1) BitStream[BitStream_Byte(NextOffset)] |= (1 << BitStream_Bit(NextOffset)); // Set the bit to 1
1315 else BitStream[BitStream_Byte(NextOffset)] &= (0xff ^ (1 << BitStream_Bit(NextOffset))); // Set the bit to 0
1316
1317 NextOffset++;
1318 }
1319 }
1320 else {
1321 // Note: This should never happen unless some code changes cause it.
1322 // So short message for coders when testing.
1323 Dbprintf ("T55 too many bits");
1324 }
1325 return NextOffset;
dd8e4513 1326}
1327
4be71814 1328// Send one downlink command to the card
28597bb6 1329void T55xx_SendCMD (uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) {
347efc12 1330
4be71814 1331 /*
1332 arg bits
1333 xxxxxxx1 0x01 PwdMode
1334 xxxxxx1x 0x02 Page
1335 xxxxx1xx 0x04 testMode
1336 xxx11xxx 0x18 downlink mode
28597bb6 1337 xx1xxxxx 0x20 !reg_readmode
4be71814 1338 x1xxxxxx 0x40 called for a read, so no data packet
28597bb6 1339 1xxxxxxx 0x80 reset
347efc12 1340
4be71814 1341 */
347efc12 1342 bool PwdMode = ((arg & 0x01) == 0x01);
1343 bool Page = (arg & 0x02);
1344 bool testMode = ((arg & 0x04) == 0x04);
1345 uint8_t downlink_mode = (arg >> 3) & 0x03;
1346 bool reg_readmode = ((arg & 0x20) == 0x20);
1347 bool read_cmd = ((arg & 0x40) == 0x40);
1348 bool reset = (arg & 0x80);
1349
1350 uint8_t i = 0;
7db36608 1351 uint8_t BitStream[10]; // Max Downlink Command size ~74 bits, so 10 bytes (80 bits)
4be71814 1352 uint8_t BitStreamLen;
4be71814 1353 T55xx_Timing *Timing;
5a996482 1354 uint8_t SendBits;
347efc12 1355
4be71814 1356 // Assigning Downlink Timeing for write
1357 switch (downlink_mode)
1358 {
1359 case T55xx_DLMode_Fixed : Timing = &T55xx_Timing_FixedBit; break;
347efc12 1360 case T55xx_DLMode_LLR : Timing = &T55xx_Timing_LLR; break;
4be71814 1361 case T55xx_DLMode_Leading0 : Timing = &T55xx_Timing_Leading0; break;
1362 case T55xx_DLMode_1of4 : Timing = &T55xx_Timing_1of4; break;
1363 default:
1364 Timing = &T55xx_Timing_FixedBit;
347efc12 1365 }
4be71814 1366
1367 // Build Bit Stream to send.
1368 memset (BitStream,0x00,sizeof(BitStream));
6763dc17 1369
dcd936a1 1370 BitStreamLen = 0; // Ensure 0 bit index to start.
6763dc17 1371
4be71814 1372 // Add Leading 0 and 1 of 4 reference bit
347efc12 1373 if ((downlink_mode == T55xx_DLMode_Leading0) || (downlink_mode == T55xx_DLMode_1of4))
4be71814 1374 BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 1,sizeof(BitStream));
e0165dcf 1375
4be71814 1376 // Add extra reference 0 for 1 of 4
347efc12 1377 if (downlink_mode == T55xx_DLMode_1of4)
4be71814 1378 BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 1,sizeof(BitStream));
1379
28597bb6 1380 // Add Opcode
347efc12 1381 if (reset) {
1382 // Reset : r*) 00
1383 BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 2,sizeof(BitStream));
1384 }
1385 else
1386 {
1387 if (testMode) Dbprintf("TestMODE");
1388 BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen,testMode ? 0 : 1 , 1,sizeof(BitStream));
1389 BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen,testMode ? 1 : Page , 1,sizeof(BitStream));
1390
1391 if (PwdMode) {
1392 // Leading 0 and 1 of 4 00 fixed bits if passsword used
1393 if ((downlink_mode == T55xx_DLMode_Leading0) || (downlink_mode == T55xx_DLMode_1of4)) {
1394 BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 2,sizeof(BitStream));
1395 }
1396 BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, Pwd, 32,sizeof(BitStream));
1397 }
1398
1399 // Add Lock bit 0
1400 if (!reg_readmode) BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, 0, 1,sizeof(BitStream));
1401
1402 // Add Data if a write command
1403 if (!read_cmd) BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, Data, 32,sizeof(BitStream));
1404
1405 // Add Address
1406 if (!reg_readmode) BitStreamLen = T55xx_SetBits (BitStream, BitStreamLen, Block, 3,sizeof(BitStream));
1407 }
1408
4be71814 1409 // Send Bits to T55xx
e0165dcf 1410 // Set up FPGA, 125kHz
f4eadf8a 1411 LFSetupFPGAForADC(95, true);
b97311b1 1412 StartTicks();
1413 // make sure tag is fully powered up...
1414 WaitMS(5);
7cfc777b 1415 // Trigger T55x7 in mode.
e0165dcf 1416 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
4be71814 1417 WaitUS(Timing->START_GAP);
e0165dcf 1418
4be71814 1419 // If long leading 0 send long reference pulse
1420 if (downlink_mode == T55xx_DLMode_LLR)
1421 T55xxWriteBit (T55xx_LongLeadingReference,Timing); // Send Long Leading Start Reference
2229ee89 1422
347efc12 1423 if ((downlink_mode == T55xx_DLMode_1of4) && (BitStreamLen > 0)) { // 1 of 4 need to send 2 bits at a time
dcd936a1 1424 for ( i = 0; i < BitStreamLen-1; i+=2 ) {
7db36608 1425 SendBits = (BitStream[BitStream_Byte(i )] >> (BitStream_Bit(i )) & 1) << 1; // Bit i
347efc12 1426 SendBits += (BitStream[BitStream_Byte(i+1)] >> (BitStream_Bit(i+1)) & 1); // Bit i+1;
7db36608 1427 T55xxWriteBit (SendBits & 3,Timing);
4be71814 1428 }
e0165dcf 1429 }
4be71814 1430 else {
1431 for (i = 0; i < BitStreamLen; i++) {
347efc12 1432 SendBits = (BitStream[BitStream_Byte(i)] >> BitStream_Bit(i));
7db36608 1433 T55xxWriteBit (SendBits & 1,Timing);
347efc12 1434 }
4be71814 1435 }
7db36608 1436}
1437
1438// Send T5577 reset command then read stream (see if we can identify the start of the stream)
1439void T55xxResetRead(void) {
1440 LED_A_ON();
28597bb6 1441
347efc12 1442 // send r* 00
1443 uint8_t arg = 0x80; // SendCMD will add correct reference mode based on flags (when added).
28597bb6 1444
347efc12 1445 // Add in downlink_mode when ready
1446 // arg |= 0x00; // dlmode << 3 (00 default - 08 leading 0 - 10 Fixed - 18 1 of 4 )
28597bb6 1447
dcd936a1 1448 //clear buffer now so it does not interfere with timing later
1449 BigBuf_Clear_keep_EM();
1450
28597bb6 1451 T55xx_SendCMD (0, 0, 0, arg); //, true);
7db36608 1452
dcd936a1 1453 TurnReadLFOn(T55xx_Timing_FixedBit.READ_GAP);
1454
7db36608 1455 // Acquisition
1456 DoPartialAcquisition(0, true, BigBuf_max_traceLen(), 0);
1457
1458 // Turn the field off
1459 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
1460 cmd_send(CMD_ACK,0,0,0,0,0);
1461 LED_A_OFF();
4be71814 1462}
e0165dcf 1463
4be71814 1464// Write one card block in page 0, no lock
1465void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) {
1466 /*
1467 arg bits
1468 xxxxxxx1 0x01 PwdMode
1469 xxxxxx1x 0x02 Page
1470 xxxxx1xx 0x04 testMode
1471 xxx11xxx 0x18 downlink mode
28597bb6 1472 xx1xxxxx 0x20 !reg_readmode
4be71814 1473 x1xxxxxx 0x40 called for a read, so no data packet
28597bb6 1474 1xxxxxxx 0x80 reset
4be71814 1475 */
1476
347efc12 1477 bool testMode = ((arg & 0x04) == 0x04);
4be71814 1478 arg &= (0xff ^ 0x40); // Called for a write, so ensure it is clear/0
1479
1480 LED_A_ON ();
1481 T55xx_SendCMD (Data, Block, Pwd, arg) ;//, false);
e0165dcf 1482
7cfc777b 1483 // Perform write (nominal is 5.6 ms for T55x7 and 18ms for E5550,
e0165dcf 1484 // so wait a little more)
b97311b1 1485
1486 // "there is a clock delay before programming"
2229ee89 1487 // - programming takes ~5.6ms for t5577 ~18ms for E5550 or t5567
b97311b1 1488 // so we should wait 1 clock + 5.6ms then read response?
2229ee89 1489 // but we need to know we are dealing with t5577 vs t5567 vs e5550 (or q5) marshmellow...
b97311b1 1490 if (testMode) {
2229ee89 1491 //TESTMODE TIMING TESTS:
1492 // <566us does nothing
1493 // 566-568 switches between wiping to 0s and doing nothing
1494 // 5184 wipes and allows 1 block to be programmed.
1495 // indefinite power on wipes and then programs all blocks with bitshifted data sent.
1496 TurnReadLFOn(5184);
b97311b1 1497
b97311b1 1498 } else {
1499 TurnReadLFOn(20 * 1000);
be2d41b7 1500 //could attempt to do a read to confirm write took
1501 // as the tag should repeat back the new block
1502 // until it is reset, but to confirm it we would
b97311b1 1503 // need to know the current block 0 config mode for
1504 // modulation clock an other details to demod the response...
1505 // response should be (for t55x7) a 0 bit then (ST if on)
1506 // block data written in on repeat until reset.
e09f21fa 1507
2229ee89 1508 //DoPartialAcquisition(20, true, 12000);
1509 }
7cfc777b 1510 // turn field off
1511 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
347efc12 1512
66837a03 1513 cmd_send(CMD_ACK,0,0,0,0,0);
4be71814 1514
1515 LED_A_OFF ();
66837a03 1516}
1517
db829602 1518// Read one card block in page [page]
4be71814 1519void T55xxReadBlock (uint16_t arg0, uint8_t Block, uint32_t Pwd) {//, struct T55xx_Timing *Timing) {
347efc12 1520
4be71814 1521 LED_A_ON();
1522
1523 /*
1524 arg bits
1525 xxxxxxx1 0x01 PwdMode
1526 xxxxxx1x 0x02 Page
1527 xxxxx1xx 0x04 testMode
1528 xxx11xxx 0x18 downlink mode
28597bb6 1529 xx1xxxxx 0x20 !reg_readmode
4be71814 1530 x1xxxxxx 0x40 called for a read, so no data packet
28597bb6 1531 1xxxxxxx 0x80 reset
4be71814 1532 */
347efc12 1533
4be71814 1534 // Set Read Flag to ensure SendCMD does not add "data" to the packet
1535 arg0 |= 0x40;
f4eadf8a 1536
347efc12 1537 // RegRead Mode true of block 0xff
4be71814 1538 if (Block == 0xff) arg0 |= 0x20;
1539
7cfc777b 1540 //make sure block is at max 7
1541 Block &= 0x7;
1542
dd8e4513 1543 //clear buffer now so it does not interfere with timing later
1544 BigBuf_Clear_ext(false);
347efc12 1545
4be71814 1546 T55xx_SendCMD (0, Block, Pwd, arg0); //, true);
64449382 1547
dd8e4513 1548 // Turn field on to read the response
1549 // 137*8 seems to get to the start of data pretty well...
1550 // but we want to go past the start and let the repeating data settle in...
1551 TurnReadLFOn(210*8);
1552
1553 // Acquisition
1554 // Now do the acquisition
1555 DoPartialAcquisition(0, true, 12000, 0);
1556
1557 // Turn the field off
1558 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
4be71814 1559 cmd_send(CMD_ACK,0,0,0,0,0);
dd8e4513 1560
dd8e4513 1561 LED_A_OFF();
1562}
1563
be2d41b7 1564void T55xxWakeUp(uint32_t Pwd){
1565 LED_B_ON();
28597bb6 1566 /*
1567 arg bits
1568 xxxxxxx1 0x01 PwdMode
1569 xxxxxx1x 0x02 Page
1570 xxxxx1xx 0x04 testMode
1571 xxx11xxx 0x18 downlink mode
1572 xx1xxxxx 0x20 !reg_readmode
1573 x1xxxxxx 0x40 called for a read, so no data packet
1574 1xxxxxxx 0x80 reset
1575 */
347efc12 1576
1577 // r* 10 (00) <pwd> r* for llr , L0 and 1/4 - (00) for L0 and 1/4 - All handled in SendCMD
1578 // So, default Opcode 10 and pwd.
1579 uint8_t arg = 0x01 | 0x40 | 0x20; //Password Read Call no data | reg_read no block
1580
1581 // Add in downlink_mode when ready
1582 // arg |= 0x00; // dlmode << 3 (00 default - 08 leading 0 - 10 Fixed - 18 1 of 4 )
28597bb6 1583
1584 T55xx_SendCMD (0, 0, Pwd, arg); //, true);
be2d41b7 1585
1586 // Turn and leave field on to let the begin repeating transmission
1587 TurnReadLFOn(20*1000);
1588}
e09f21fa 1589
1590/*-------------- Cloning routines -----------*/
3606ac0a 1591
1592void WriteT55xx(uint32_t *blockdata, uint8_t startblock, uint8_t numblocks) {
1593 // write last block first and config block last (if included)
66837a03 1594 for (uint8_t i = numblocks+startblock; i > startblock; i--) {
347efc12 1595 T55xxWriteBlock(blockdata[i-1],i-1,0,0);//,false); //,&T55xx_Timing_FixedBit);
1596 //T55xx_SendCMD (blockdata[i-1],i-1,0,0);//,false); //,&T55xx_Timing_FixedBit);
66837a03 1597 }
3606ac0a 1598}
1599
5f84531b
SS
1600// Copy a HID-like card (e.g. HID Proximity, Paradox) to a T55x7 compatible card
1601void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT, uint8_t preamble) {
3606ac0a 1602 uint32_t data[] = {0,0,0,0,0,0,0};
3606ac0a 1603 uint8_t last_block = 0;
e0165dcf 1604
3606ac0a 1605 if (longFMT) {
e0165dcf 1606 // Ensure no more than 84 bits supplied
1607 if (hi2>0xFFFFF) {
1608 DbpString("Tags can only have 84 bits.");
1609 return;
1610 }
1611 // Build the 6 data blocks for supplied 84bit ID
1612 last_block = 6;
5f84531b
SS
1613 // load preamble & long format identifier (9E manchester encoded)
1614 data[1] = (preamble << 24) | 0x96A900 | (manchesterEncode2Bytes((hi2 >> 16) & 0xF) & 0xFF);
3606ac0a 1615 // load raw id from hi2, hi, lo to data blocks (manchester encoded)
1616 data[2] = manchesterEncode2Bytes(hi2 & 0xFFFF);
1617 data[3] = manchesterEncode2Bytes(hi >> 16);
1618 data[4] = manchesterEncode2Bytes(hi & 0xFFFF);
1619 data[5] = manchesterEncode2Bytes(lo >> 16);
1620 data[6] = manchesterEncode2Bytes(lo & 0xFFFF);
5f84531b 1621 } else {
e0165dcf 1622 // Ensure no more than 44 bits supplied
1623 if (hi>0xFFF) {
1624 DbpString("Tags can only have 44 bits.");
1625 return;
1626 }
e0165dcf 1627 // Build the 3 data blocks for supplied 44bit ID
1628 last_block = 3;
3606ac0a 1629 // load preamble
5f84531b 1630 data[1] = (preamble << 24) | (manchesterEncode2Bytes(hi) & 0xFFFFFF);
3606ac0a 1631 data[2] = manchesterEncode2Bytes(lo >> 16);
1632 data[3] = manchesterEncode2Bytes(lo & 0xFFFF);
e0165dcf 1633 }
3606ac0a 1634 // load chip config block
1635 data[0] = T55x7_BITRATE_RF_50 | T55x7_MODULATION_FSK2a | last_block << T55x7_MAXBLOCK_SHIFT;
e0165dcf 1636
76346455 1637 //TODO add selection of chip for Q5 or T55x7
1638 // data[0] = (((50-2)/2)<<T5555_BITRATE_SHIFT) | T5555_MODULATION_FSK2 | T5555_INVERT_OUTPUT | last_block << T5555_MAXBLOCK_SHIFT;
1639
e0165dcf 1640 LED_D_ON();
1641 // Program the data blocks for supplied ID
1642 // and the block 0 for HID format
3606ac0a 1643 WriteT55xx(data, 0, last_block+1);
e0165dcf 1644
1645 LED_D_OFF();
1646
1647 DbpString("DONE!");
e09f21fa 1648}
1649
9f669cb2 1650void CopyIOtoT55x7(uint32_t hi, uint32_t lo) {
3606ac0a 1651 uint32_t data[] = {T55x7_BITRATE_RF_64 | T55x7_MODULATION_FSK2a | (2 << T55x7_MAXBLOCK_SHIFT), hi, lo};
76346455 1652 //TODO add selection of chip for Q5 or T55x7
1653 // data[0] = (((64-2)/2)<<T5555_BITRATE_SHIFT) | T5555_MODULATION_FSK2 | T5555_INVERT_OUTPUT | 2 << T5555_MAXBLOCK_SHIFT;
e09f21fa 1654
e0165dcf 1655 LED_D_ON();
1656 // Program the data blocks for supplied ID
3606ac0a 1657 // and the block 0 config
1658 WriteT55xx(data, 0, 3);
e09f21fa 1659
e0165dcf 1660 LED_D_OFF();
e09f21fa 1661
e0165dcf 1662 DbpString("DONE!");
e09f21fa 1663}
1664
3606ac0a 1665// Clone Indala 64-bit tag by UID to T55x7
1666void CopyIndala64toT55x7(uint32_t hi, uint32_t lo) {
1667 //Program the 2 data blocks for supplied 64bit UID
1668 // and the Config for Indala 64 format (RF/32;PSK1 with RF/2;Maxblock=2)
1669 uint32_t data[] = { T55x7_BITRATE_RF_32 | T55x7_MODULATION_PSK1 | (2 << T55x7_MAXBLOCK_SHIFT), hi, lo};
76346455 1670 //TODO add selection of chip for Q5 or T55x7
1671 // data[0] = (((32-2)/2)<<T5555_BITRATE_SHIFT) | T5555_MODULATION_PSK1 | 2 << T5555_MAXBLOCK_SHIFT;
1672
3606ac0a 1673 WriteT55xx(data, 0, 3);
1674 //Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=2;Inverse data)
1675 // T5567WriteBlock(0x603E1042,0);
1676 DbpString("DONE!");
1677}
1678// Clone Indala 224-bit tag by UID to T55x7
66837a03 1679void CopyIndala224toT55x7(uint32_t uid1, uint32_t uid2, uint32_t uid3, uint32_t uid4, uint32_t uid5, uint32_t uid6, uint32_t uid7) {
3606ac0a 1680 //Program the 7 data blocks for supplied 224bit UID
1681 uint32_t data[] = {0, uid1, uid2, uid3, uid4, uid5, uid6, uid7};
1682 // and the block 0 for Indala224 format
1dae9811 1683 //Config for Indala (RF/32;PSK2 with RF/2;Maxblock=7)
1684 data[0] = T55x7_BITRATE_RF_32 | T55x7_MODULATION_PSK2 | (7 << T55x7_MAXBLOCK_SHIFT);
76346455 1685 //TODO add selection of chip for Q5 or T55x7
1dae9811 1686 // data[0] = (((32-2)>>1)<<T5555_BITRATE_SHIFT) | T5555_MODULATION_PSK2 | 7 << T5555_MAXBLOCK_SHIFT;
3606ac0a 1687 WriteT55xx(data, 0, 8);
1688 //Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=7;Inverse data)
1689 // T5567WriteBlock(0x603E10E2,0);
1690 DbpString("DONE!");
1691}
709665b5 1692// clone viking tag to T55xx
1693void CopyVikingtoT55xx(uint32_t block1, uint32_t block2, uint8_t Q5) {
1694 uint32_t data[] = {T55x7_BITRATE_RF_32 | T55x7_MODULATION_MANCHESTER | (2 << T55x7_MAXBLOCK_SHIFT), block1, block2};
b97311b1 1695 if (Q5) data[0] = T5555_SET_BITRATE(32) | T5555_MODULATION_MANCHESTER | 2 << T5555_MAXBLOCK_SHIFT;
709665b5 1696 // Program the data blocks for supplied ID and the block 0 config
1697 WriteT55xx(data, 0, 3);
1698 LED_D_OFF();
1699 cmd_send(CMD_ACK,0,0,0,0,0);
1700}
3606ac0a 1701
e09f21fa 1702// Define 9bit header for EM410x tags
3606ac0a 1703#define EM410X_HEADER 0x1FF
e09f21fa 1704#define EM410X_ID_LENGTH 40
1705
66837a03 1706void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo) {
e0165dcf 1707 int i, id_bit;
1708 uint64_t id = EM410X_HEADER;
1709 uint64_t rev_id = 0; // reversed ID
1710 int c_parity[4]; // column parity
1711 int r_parity = 0; // row parity
1712 uint32_t clock = 0;
1713
1714 // Reverse ID bits given as parameter (for simpler operations)
1715 for (i = 0; i < EM410X_ID_LENGTH; ++i) {
1716 if (i < 32) {
1717 rev_id = (rev_id << 1) | (id_lo & 1);
1718 id_lo >>= 1;
1719 } else {
1720 rev_id = (rev_id << 1) | (id_hi & 1);
1721 id_hi >>= 1;
1722 }
1723 }
1724
1725 for (i = 0; i < EM410X_ID_LENGTH; ++i) {
1726 id_bit = rev_id & 1;
1727
1728 if (i % 4 == 0) {
1729 // Don't write row parity bit at start of parsing
1730 if (i)
1731 id = (id << 1) | r_parity;
1732 // Start counting parity for new row
1733 r_parity = id_bit;
1734 } else {
1735 // Count row parity
1736 r_parity ^= id_bit;
1737 }
1738
1739 // First elements in column?
1740 if (i < 4)
1741 // Fill out first elements
1742 c_parity[i] = id_bit;
1743 else
1744 // Count column parity
1745 c_parity[i % 4] ^= id_bit;
1746
1747 // Insert ID bit
1748 id = (id << 1) | id_bit;
1749 rev_id >>= 1;
1750 }
1751
1752 // Insert parity bit of last row
1753 id = (id << 1) | r_parity;
1754
1755 // Fill out column parity at the end of tag
1756 for (i = 0; i < 4; ++i)
1757 id = (id << 1) | c_parity[i];
1758
1759 // Add stop bit
1760 id <<= 1;
1761
1762 Dbprintf("Started writing %s tag ...", card ? "T55x7":"T5555");
1763 LED_D_ON();
1764
1765 // Write EM410x ID
72c5877a 1766 uint32_t data[] = {0, (uint32_t)(id>>32), (uint32_t)(id & 0xFFFFFFFF)};
76346455 1767
1768 clock = (card & 0xFF00) >> 8;
1769 clock = (clock == 0) ? 64 : clock;
1770 Dbprintf("Clock rate: %d", clock);
1771 if (card & 0xFF) { //t55x7
1772 clock = GetT55xxClockBit(clock);
3606ac0a 1773 if (clock == 0) {
e0165dcf 1774 Dbprintf("Invalid clock rate: %d", clock);
1775 return;
1776 }
3606ac0a 1777 data[0] = clock | T55x7_MODULATION_MANCHESTER | (2 << T55x7_MAXBLOCK_SHIFT);
76346455 1778 } else { //t5555 (Q5)
b97311b1 1779 data[0] = T5555_SET_BITRATE(clock) | T5555_MODULATION_MANCHESTER | (2 << T5555_MAXBLOCK_SHIFT);
e0165dcf 1780 }
3606ac0a 1781
1782 WriteT55xx(data, 0, 3);
e0165dcf 1783
1784 LED_D_OFF();
1785 Dbprintf("Tag %s written with 0x%08x%08x\n", card ? "T55x7":"T5555",
1786 (uint32_t)(id >> 32), (uint32_t)id);
e09f21fa 1787}
1788
e09f21fa 1789//-----------------------------------
1790// EM4469 / EM4305 routines
1791//-----------------------------------
1792#define FWD_CMD_LOGIN 0xC //including the even parity, binary mirrored
1793#define FWD_CMD_WRITE 0xA
1794#define FWD_CMD_READ 0x9
1795#define FWD_CMD_DISABLE 0x5
2de26056 1796#define FWD_CMD_PROTECT 0x3
e09f21fa 1797
e09f21fa 1798uint8_t forwardLink_data[64]; //array of forwarded bits
1799uint8_t * forward_ptr; //ptr for forward message preparation
1800uint8_t fwd_bit_sz; //forwardlink bit counter
1801uint8_t * fwd_write_ptr; //forwardlink bit pointer
1802
1803//====================================================================
1804// prepares command bits
1805// see EM4469 spec
1806//====================================================================
1807//--------------------------------------------------------------------
db829602 1808// VALUES TAKEN FROM EM4x function: SendForward
1809// START_GAP = 440; (55*8) cycles at 125Khz (8us = 1cycle)
1810// WRITE_GAP = 128; (16*8)
1811// WRITE_1 = 256 32*8; (32*8)
1812
1813// These timings work for 4469/4269/4305 (with the 55*8 above)
1814// WRITE_0 = 23*8 , 9*8 SpinDelayUs(23*8);
1815
e09f21fa 1816uint8_t Prepare_Cmd( uint8_t cmd ) {
e09f21fa 1817
e0165dcf 1818 *forward_ptr++ = 0; //start bit
1819 *forward_ptr++ = 0; //second pause for 4050 code
e09f21fa 1820
e0165dcf 1821 *forward_ptr++ = cmd;
1822 cmd >>= 1;
1823 *forward_ptr++ = cmd;
1824 cmd >>= 1;
1825 *forward_ptr++ = cmd;
1826 cmd >>= 1;
1827 *forward_ptr++ = cmd;
e09f21fa 1828
e0165dcf 1829 return 6; //return number of emited bits
e09f21fa 1830}
1831
1832//====================================================================
1833// prepares address bits
1834// see EM4469 spec
1835//====================================================================
e09f21fa 1836uint8_t Prepare_Addr( uint8_t addr ) {
e09f21fa 1837
e0165dcf 1838 register uint8_t line_parity;
e09f21fa 1839
e0165dcf 1840 uint8_t i;
1841 line_parity = 0;
1842 for(i=0;i<6;i++) {
1843 *forward_ptr++ = addr;
1844 line_parity ^= addr;
1845 addr >>= 1;
1846 }
e09f21fa 1847
e0165dcf 1848 *forward_ptr++ = (line_parity & 1);
e09f21fa 1849
e0165dcf 1850 return 7; //return number of emited bits
e09f21fa 1851}
1852
1853//====================================================================
1854// prepares data bits intreleaved with parity bits
1855// see EM4469 spec
1856//====================================================================
e09f21fa 1857uint8_t Prepare_Data( uint16_t data_low, uint16_t data_hi) {
e0165dcf 1858
1859 register uint8_t line_parity;
1860 register uint8_t column_parity;
1861 register uint8_t i, j;
1862 register uint16_t data;
1863
1864 data = data_low;
1865 column_parity = 0;
1866
1867 for(i=0; i<4; i++) {
1868 line_parity = 0;
1869 for(j=0; j<8; j++) {
1870 line_parity ^= data;
1871 column_parity ^= (data & 1) << j;
1872 *forward_ptr++ = data;
1873 data >>= 1;
1874 }
1875 *forward_ptr++ = line_parity;
1876 if(i == 1)
1877 data = data_hi;
1878 }
1879
1880 for(j=0; j<8; j++) {
1881 *forward_ptr++ = column_parity;
1882 column_parity >>= 1;
1883 }
1884 *forward_ptr = 0;
1885
1886 return 45; //return number of emited bits
e09f21fa 1887}
1888
1889//====================================================================
1890// Forward Link send function
1891// Requires: forwarLink_data filled with valid bits (1 bit per byte)
1892// fwd_bit_count set with number of bits to be sent
1893//====================================================================
1894void SendForward(uint8_t fwd_bit_count) {
1895
e0165dcf 1896 fwd_write_ptr = forwardLink_data;
1897 fwd_bit_sz = fwd_bit_count;
1898
40c6a02b 1899 // Set up FPGA, 125kHz or 95 divisor
7cfc777b 1900 LFSetupFPGAForADC(95, true);
fa1e00cf 1901
e0165dcf 1902 // force 1st mod pulse (start gap must be longer for 4305)
1903 fwd_bit_sz--; //prepare next bit modulation
1904 fwd_write_ptr++;
1905 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
62a38cc8 1906 WaitUS(55*8); //55 cycles off (8us each)for 4305 //another reader has 37 here...
e0165dcf 1907 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
62a38cc8 1908 WaitUS(18*8); //18 cycles on (8us each)
e0165dcf 1909
817611f5 1910 // now start writting - each bit should be 32*8 total length
e0165dcf 1911 while(fwd_bit_sz-- > 0) { //prepare next bit modulation
1912 if(((*fwd_write_ptr++) & 1) == 1)
40c6a02b 1913 WaitUS(32*8); //32 cycles at 125Khz (8us each)
e0165dcf 1914 else {
1915 //These timings work for 4469/4269/4305 (with the 55*8 above)
1916 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
62a38cc8 1917 WaitUS(23*8); //23 cycles off (8us each)
e0165dcf 1918 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
817611f5 1919 WaitUS((32-23)*8); //remaining cycles on (8us each)
e0165dcf 1920 }
1921 }
e09f21fa 1922}
1923
1924void EM4xLogin(uint32_t Password) {
1925
e0165dcf 1926 uint8_t fwd_bit_count;
e09f21fa 1927
e0165dcf 1928 forward_ptr = forwardLink_data;
1929 fwd_bit_count = Prepare_Cmd( FWD_CMD_LOGIN );
1930 fwd_bit_count += Prepare_Data( Password&0xFFFF, Password>>16 );
e09f21fa 1931
e0165dcf 1932 SendForward(fwd_bit_count);
e09f21fa 1933
e0165dcf 1934 //Wait for command to complete
1935 SpinDelay(20);
e09f21fa 1936}
1937
1938void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
1939
e0165dcf 1940 uint8_t fwd_bit_count;
7cfc777b 1941
1942 // Clear destination buffer before sending the command
709665b5 1943 BigBuf_Clear_ext(false);
e0165dcf 1944
7666f460 1945 LED_A_ON();
40c6a02b 1946 StartTicks();
e0165dcf 1947 //If password mode do login
1948 if (PwdMode == 1) EM4xLogin(Pwd);
1949
1950 forward_ptr = forwardLink_data;
1951 fwd_bit_count = Prepare_Cmd( FWD_CMD_READ );
1952 fwd_bit_count += Prepare_Addr( Address );
1953
e0165dcf 1954 SendForward(fwd_bit_count);
40c6a02b 1955 WaitUS(400);
e0165dcf 1956 // Now do the acquisition
217cfb6b 1957 DoPartialAcquisition(20, true, 6000, 1000);
7666f460 1958
e0165dcf 1959 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
7666f460 1960 LED_A_OFF();
7cfc777b 1961 cmd_send(CMD_ACK,0,0,0,0,0);
e09f21fa 1962}
1963
7666f460 1964void EM4xWriteWord(uint32_t flag, uint32_t Data, uint32_t Pwd) {
1965
2de26056 1966 bool PwdMode = (flag & 0x1);
7666f460 1967 uint8_t Address = (flag >> 8) & 0xFF;
e0165dcf 1968 uint8_t fwd_bit_count;
e09f21fa 1969
7666f460 1970 //clear buffer now so it does not interfere with timing later
1971 BigBuf_Clear_ext(false);
1972
1973 LED_A_ON();
40c6a02b 1974 StartTicks();
e0165dcf 1975 //If password mode do login
7666f460 1976 if (PwdMode) EM4xLogin(Pwd);
e09f21fa 1977
e0165dcf 1978 forward_ptr = forwardLink_data;
1979 fwd_bit_count = Prepare_Cmd( FWD_CMD_WRITE );
1980 fwd_bit_count += Prepare_Addr( Address );
1981 fwd_bit_count += Prepare_Data( Data&0xFFFF, Data>>16 );
e09f21fa 1982
e0165dcf 1983 SendForward(fwd_bit_count);
e09f21fa 1984
e0165dcf 1985 //Wait for write to complete
a37228c8 1986 //SpinDelay(10);
7666f460 1987
40c6a02b 1988 WaitUS(6500);
7666f460 1989 //Capture response if one exists
217cfb6b 1990 DoPartialAcquisition(20, true, 6000, 1000);
7666f460 1991
e0165dcf 1992 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
7666f460 1993 LED_A_OFF();
1994 cmd_send(CMD_ACK,0,0,0,0,0);
e09f21fa 1995}
2de26056 1996
1997void EM4xProtect(uint32_t flag, uint32_t Data, uint32_t Pwd) {
1998
1999 bool PwdMode = (flag & 0x1);
2000 uint8_t fwd_bit_count;
2001
2002 //clear buffer now so it does not interfere with timing later
2003 BigBuf_Clear_ext(false);
2004
2005 LED_A_ON();
2006 StartTicks();
2007 //If password mode do login
2008 if (PwdMode) EM4xLogin(Pwd);
2009
2010 forward_ptr = forwardLink_data;
2011 fwd_bit_count = Prepare_Cmd( FWD_CMD_PROTECT );
2012
2013 //unsure if this needs the full packet config...
2014 fwd_bit_count += Prepare_Data( Data&0xFFFF, Data>>16 );
2015
2016 SendForward(fwd_bit_count);
2017
2018 //Wait for write to complete
2019 //SpinDelay(10);
2020
2021 WaitUS(6500);
2022 //Capture response if one exists
2023 DoPartialAcquisition(20, true, 6000, 1000);
2024
2025 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
2026 LED_A_OFF();
2027 cmd_send(CMD_ACK,0,0,0,0,0);
2028}
e04475c4 2029/*
2030Reading a COTAG.
2031
2032COTAG needs the reader to send a startsequence and the card has an extreme slow datarate.
2033because of this, we can "sample" the data signal but we interpreate it to Manchester direct.
2034
2035READER START SEQUENCE:
2036burst 800 us, gap 2.2 msecs
2037burst 3.6 msecs gap 2.2 msecs
2038burst 800 us gap 2.2 msecs
2039pulse 3.6 msecs
2040
2041This triggers a COTAG tag to response
2042*/
2043void Cotag(uint32_t arg0) {
2044
2045#define OFF { FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); WaitUS(2035); }
2046#define ON(x) { FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); WaitUS((x)); }
2047
2048 uint8_t rawsignal = arg0 & 0xF;
2049
2050 LED_A_ON();
2051
2052 // Switching to LF image on FPGA. This might empty BigBuff
2053 FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
2054
2055 //clear buffer now so it does not interfere with timing later
2056 BigBuf_Clear_ext(false);
2057
2058 // Set up FPGA, 132kHz to power up the tag
2059 FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 89);
2060 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
2061
2062 // Connect the A/D to the peak-detected low-frequency path.
2063 SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
2064
2065 // Now set up the SSC to get the ADC samples that are now streaming at us.
6a5d4e17 2066 FpgaSetupSsc(FPGA_MAJOR_MODE_LF_ADC);
e04475c4 2067
2068 // start clock - 1.5ticks is 1us
2069 StartTicks();
2070
2071 //send COTAG start pulse
2072 ON(740) OFF
2073 ON(3330) OFF
2074 ON(740) OFF
2075 ON(1000)
2076
2077 switch(rawsignal) {
2078 case 0: doCotagAcquisition(50000); break;
2079 case 1: doCotagAcquisitionManchester(); break;
b9957414 2080 case 2: DoAcquisition_config(true, 0); break;
e04475c4 2081 }
2082
2083 // Turn the field off
2084 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
2085 cmd_send(CMD_ACK,0,0,0,0,0);
2086 LED_A_OFF();
2087}
Impressum, Datenschutz